Engineering Commons^™

Molecular Combing Of Dna Nanofibers And Comparison To Electrospinning, Tanner L. Buresh

UCARE: Research Products

The goal of these experiments was to create DNA nanofibers through the method of molecular combing (MC) and then compare the MC fibers to fibers created with electrospinning (ES). The experiment was designed and initial samples were created. After confirming that the method would succeed in creating DNA fibers, several parametric studies were performed in order to optimize the experiment and create the most uniform fibers possible. The parametric studies were done on the following variables: substrate material, pH level of DNA solution, and DNA solution concentration. After completion of all experiments, it was determined that although fibers could be …

Biomarkers Used To Detect And Monitor Neurological Autoimmune Diseases, Robert Powers, Jay Reddy, Teklab Gebregiworgis, Chandirasegara Massilamany, Arunakumar Gangaplara, Zsolt Illes

Robert Powers Publications

Biomarkers of neurological autoimmune diseases are described, and methods of using such biomarkers also are described.

Autoimmune diseases arise from an inappropriate immune response by the body against Substances or tissues normally found in the body. Neurological autoimmune diseases are those autoimmune diseases that affect some aspect of the neurological system (e.g., the central nervous system or the peripheral nervous system). Biomarkers of one or more neu rological autoimmune diseases, especially those biomarkers that can be evaluated non-invasively, are useful in the art. Biomarkers of neurological autoimmune diseases are pro vided, and methods of using Such biomarkers also are pro …

The Change In Nutritional Status In Traumatic Brain Injury Patients: A Retrospective Descriptive A Retrospective Descriptive Study, Dina A. Masha'al

USF Tampa Graduate Theses and Dissertations

There is a high prevalence in malnutrition among traumatic brain injury (TBI) due to the hypermetabolism and hypercatabolism which develop post injury. Traumatic brain injury patients are different, even among themselves, in their energy requirements and response to nutritional therapy. This implies that there are other factors that affect the energy intake of these patients and enhance the incidence of malnutrition.

This dissertation study examines the nutritional status of TBI patients upon admission to the intensive care unit (ICU) and during their hospital stay to describe baseline status, detect changes in nutritional status over 7 days, and identify the factors …

Under The Needle: Ergonomic Issues With Lethal Injection Protocols, Gabriella Hancock

Human Factors and Applied Psychology Student Conference

The institution of capital punishment represents one of the most contentious issues affecting societies today; and while the practice is only implemented in 58 countries, the controversy affects the world at large as over 60% of the human population lives in nations that condone the death penalty (Hali, 2015). In the United States, people who support capital punishment believe the practice to be an effective crime deterrent for potential criminals and therefore a prospective protective measure for law abiding citizens. Moreover, advocates defend their position by forwarding the argument that executions are ‘humane’; that use of lethal injection ensures that …

Airline Quality Rating 2016, Brent D. Bowen, Dean E. Headley

Airline Quality Rating Report

The Airline Quality Rating (AQR) is the most comprehensive study of the performance and quality of the largest airlines in the United States. The rating is a multifactor look of the airlines based on mishandled baggage, consumer complaints, on-time performance and involuntary denied boardings.

The Airline Quality Rating industry score for 2015 shows an industry that improved slightly in overall performance quality over the previous year. Six airlines (Delta, ExpressJet, JetBlue, SkyWest, Southwest, and United) showed improvement in AQR scores in 2015. ExpressJet and SkyWest had the largest improvements in their AQR scores for 2015.

15 Years Of Commercializing Nanomedicine Into Real Medical Products, Thomas J. Webster

Nanotechnology in Medicine: From Molecules to Humans

Department of Chemical Engineering, Northeastern University, Boston, MA, 02115, USA and

There is an acute shortage of organs due to disease, trauma, congenital defects, and most importantly, age related maladies. The synthetic materials used in tissue engineering applications today are typically composed of millimeter or micron sized particles and/or fiber dimensions. Although human cells are on the micron scale, their individual components, e.g. proteins, are composed of nanometer features. By modifying only the nanofeatures on material surfaces without changing surface chemistry, it is possible to increase tissue growth of any human tissue by controlling the endogenous adsorption of adhesive proteins …

2016 Abstract Book, Undergraduate Creative Activities And Research Forum

Undergraduate Creative Activities and Research Forum Abstract Books

This booklet contains all the abstracts from the 2016 forum held at Southern Illinois University Carbondale. Coordinated by the Center for Undergraduate Research and Creative Activities, a unit in the Office of the Vice Chancellor for Research.

Management Of A Sever Degloving Foot Injury: A Rare Presentation Of Food Injury In Emergency Department, Ugur Lok, Hasan Buyukaslan, Umut Gulacti, Fatih Dogan, Irfan Aydin

Materials Science and Engineering Faculty Research & Creative Works

Occupational crash injuries of the foot present a significant reconstructive challenge due to the superficial location of structures such as tendon, joint and neurovascular network essential for proper acceptance of weight bearing and shear forces associated with bipedal gait. We discussed here a rare case in which an extensive degloving injury of the foot and combined with knee traumatic dislocation and proximal fibula tip fracture that underwent amputation. The authors suggested that none of treatment modalities of degloving are entirely satisfactory, so that each case must be considered independently with cons and pros

Coel: A Cloud-Based Reaction Network Simulator, Peter Banda, Christof Teuscher

Electrical and Computer Engineering Faculty Publications and Presentations

Chemical Reaction Networks (CRNs) are a formalism to describe the macroscopic behavior of chemical systems. We introduce COEL, a web- and cloud-based CRN simulation framework, which does not require a local installation, runs simulations on a large computational grid, provides reliable database storage, and offers a visually pleasing and intuitive user interface. We present an overview of the underlying software, the technologies, and the main architectural approaches employed. Some of COEL’s key features include ODE-based simulations of CRNs and multicompartment reaction networks with rich interaction options, a built-in plotting engine, automatic DNA-strand displacement transformation and visualization, SBML/Octave/Matlab export, and a …

Parametric Analysis Of A Solid Oxide Fuel Cell Auxiliary Power Unit Operating On Syngas Produced By Autothermal Reforming Of Hydrocarbon Fuels, Jun Dong, Xinhai Xu, Ben Xu, Shuyang Zhang

Mechanical Engineering Faculty Publications

A 1 kWe integrated auxiliary power unit (APU) system consisting of an autothermal reformer and a solid oxide fuel cell (SOFC) unit, as well as balance-of-plant components, was designed and analyzed. A relatively easy-to-approach SOFC model was developed in order to conveniently calculate V-I and P-I curves and the system's net efficiency at different operating conditions. The effects of steam to carbon and oxygen to carbon ratios in the reactants, channel dimensions of the SOFC unit, and hydrocarbon fuel types on the integrated APU system's performance were discussed. Five hydrocarbon fuels including diesel, Jet-A, gasoline, ethanol, and methanol were studied …

Airline Marketing Preferences, Kylie Johnson, Deborah Carstens Ph.D., Stephen Rice Ph.D.

Human Factors and Applied Psychology Student Conference

The aim of this research is to assess airline marketing strategies providing consumer preferences to better target potential customers. The airline industry has transformed over the years, and cost and amenities have been impacted in the airline evolution. There has been consideration of whether flight cost, or flight amenities and passenger experience should be analyzed to result in enhanced marketing in the airline industry. An online survey was issued to examine which flight amenities potential customers preferred. Furthermore, the length of the flight was examined to determine if consumer preferences changed for domestic versus international flights. The survey findings are …

Estimating The Probability Of Vegetation To Be Groundwater Dependent Based On The Evaluation Of Tree Models, Isabel C. Pérez Hoyos, Nir Y. Krakauer, Reza Khanbilvardi

Publications and Research

Groundwater Dependent Ecosystems (GDEs) are increasingly threatened by humans’ rising demand for water resources. Consequently, it is imperative to identify the location of GDEs to protect them. This paper develops a methodology to identify the probability of an ecosystem to be groundwater dependent. Probabilities are obtained by modeling the relationship between the known locations of GDEs and factors influencing groundwater dependence, namely water table depth and climatic aridity index. Probabilities are derived for the state of Nevada, USA, using modeled water table depth and aridity index values obtained from the Global Aridity database. The model selected results from the performance …

Supporting Graduate Education: A Library-Wide Approach, Deborah Lee

Transforming Libraries for Graduate Students

The Mississippi State University Libraries serves a diverse graduate student population that includes over 140 graduate majors or concentrations and approximately 3600 students. The MSU Libraries has developed a comprehensive approach to meeting the research and professional development needs of graduate students. The panel will be led by Dr. Deborah Lee, Professor and Coordinator of Graduate Student Services at the MSU Libraries; other members of the panel will include representation from the Office of Thesis and Dissertation Review and the Associate Dean for Public Services.

The presentation will include a discussion of the development and use of specialized graduate student …

Spring 2016 Biomedical Engineering Newsletter, Department Of Biomedical Engineering, Michigan Technological University

Department of Biomedical Engineering Newsletters

Table of Contents

• Focus on Cardiovascular Research
• BMES Rising Star Feng Zhao
• Magnetoelastic: Sensing more with less
• Portage Health/Michigan Tech Partnership
• Remembering Dr. Michael Neuman

Spatio-Temporal Linear Stability Analysis Of Stratified Planar Wakes: Velocity And Density Asymmetry Effects, Benjamin Emerson, Swapnil Jagtap, J. Mathew Quinlan, Michael W. Renfro, Baki M. Cetegen, Tim Lieuwen

Mechanical Engineering Faculty Publications

This paper explores the hydrodynamic stability of bluff body wakes with non-uniform mean density, asymmetric mean density, and velocity profiles. This work is motivated by experiments [S. Tuttle et al., “Lean blow off behavior of asymmetrically-fueled bluff body-stabilized flames,” Combust. Flame 160, 1677 (2013)], which investigated reacting wakes with equivalence ratio stratification and, hence, asymmetry in the base flow density profiles. They showed that highly stratified cases exhibited strong, narrowband oscillations, suggestive of global hydrodynamic instability. In this paper, we present a local hydrodynamic stability analysis for non-uniform density wakes that includes base flow asymmetry. The results show …

Hand Control Of Bipedal Balance In Quiet Standing: Implementations For Lower Extremity Exoskeleton, Ala’A Al-Rashdan

Dissertations

Maintaining stable posture is important for humans, even though it is challenging because of our bipedal structure. One of the main balance related disorders is paraplegia due to spinal cord injury. People with a complete spinal cord injury have motor and sensory impairment that greatly reduces the ability to move their lower extremities. In recent years, lower extremity exoskeletons that apply torques generated by motors to the joints of the person have helped to them stand and walk.

This research is a part of an extended project to build a new exoskeleton for use by individuals with paraplegia due to …

Decay Of Pressure Fluctuation In The Hyporheic Zone Around A Cylinder, Timothy Calappi, Carol J. Miller

Civil and Environmental Engineering Faculty Research Publications

Erosion around a submerged cylinder is a well-studied problem, and is of particular interest in bridge pier scour applications. Particles erode when lift and drag forces overcome a critical threshold. These forces are typically studied from above the water-riverbed interface and are related to geometry and surficial processes. The present study maps hyporheic pressure fluctuations as they are related to surface water velocity fluctuations. Relatively, high-pressure events in the subsurface promote a destabilizing force from within the riverbed and increase the potential for the mobilization of sediment. Differential pressure transducers were fitted within a vertical cylinder in a movable bed …

Engineering At San Jose State University, Spring 2016, San Jose State University, Charles W. Davidson College Of Engineering

Engineering at San Jose State University

No abstract provided.

Assessing The Performance Of A Soy Methyl Ester -Polystyrene Topical Treatment To Extend The Service Life Of Concrete Structures, D'Shawn G. Thomas

Open Access Theses

Experimental results show that soy methyl ester (SME), a derivative of soy bean oil, along with the incorporation of polystyrene (PS) is a non-toxic, biodegradable and renewable material that can be used effectively as a topical concrete surface treatment. While, concrete sealants and topical surface treatments can be used to extend to durability of concrete structures, it is difficult to predict the durability of concrete structures sealed with a sealant or topical surface treatment. This is due to a lack of necessary model inputs that can be used to address the durability of concrete structures treated with these materials. In …

Diffractive Propagation And Recovery Of Modulated (Including Chaotic) Electromagnetic Waves Through Uniform Atmosphere And Modified Von Karman Phase Turbulence, Monish Ranjan Chatterjee, Fathi H.A. Mohamed

Electrical and Computer Engineering Faculty Publications

In a parallel approach to recently-used transfer function formalism, a study involving diffraction of modulated electromagnetic (EM) waves through uniform and phase-turbulent atmospheres is reported in this paper. Specifically, the input wave is treated as a modulated optical carrier, represented by use of a sinusoidal phasor with a slowly timevarying envelope. Using phasors and (spatial) Fourier transforms, the complex phasor wave is transmitted across a uniform or turbulent medium using the Kirchhoff-Fresnel integral and the random phase screen.

Some preliminary results are presented comparing non-chaotic and chaotic information transmission through turbulence, outlining possible improvement in performance utilizing the robust features …

Differential Tilt Variance Effects Of Turbulence In Imagery: Comparing Simulation With Theory, Daniel A. Lemaster, Russell C. Hardie, Szymon Gladysz, Matthew D. Howard, Michael Armand Rucci, Matthew E. Trippel, Jonathan D. Power, Barry K. Karch

Electrical and Computer Engineering Faculty Publications

Differential tilt variance is a useful metric for interpreting the distorting effects of turbulence in incoherent imaging systems. In this paper, we compare the theoretical model of differential tilt variance to simulations. Simulation is based on a Monte Carlo wave optics approach with split step propagation. Results show that the simulation closely matches theory. The results also show that care must be taken when selecting a method to estimate tilts.

Aggie Engineers Receive Nsf Graduate Research Fellowships | College Of Engineering, Usu College Of Engineering

College of Engineering News

April 1, 2016 – A Utah State University Aggie from the College of Engineering has been selected to receive the prestigious National Science Foundation Fellowship Award that will help cover the costs of graduate studies. A second engineering alumnus also received the award.

Educators’ Resistance To The Technology And Engineering Education Transition, Kenneth L. Rigler Ph.D.

Applied Technology Faculty Publications

The purpose of the qualitative grounded theory study was to explore why industrial arts educators resisted organizational change to technology and engineering education. An exploratory, grounded theory method was used to identify new theory related to educators’ resistance because the current literature did not provide a theoretical perspective about why industrial arts educators have resisted the change. The sampling frame was derived from a database of 379 secondary technology and engineering education teachers in the state of Kansas, and a sample size of 13 participants was needed to reach theoretical saturation of the phenomenon. The data for the study was …

Department Of Biological Systems Engineering Newsletter, Spring 2016

BSE Department Magazine

No abstract provided.

Content-Based Image Analysis With Applications To The Multifunction Printer Imaging Pipeline And Image Databases, Cheng Lu

Open Access Dissertations

Image understanding is one of the most important topics for various applications. Most of image understanding studies focus on content-based approach while some others also rely on meta data of images. Image understanding includes several sub-topics such as classification, segmentation, retrieval and automatic annotation etc., which are heavily studied recently. This thesis proposes several new methods and algorithms for image classification, retrieval and automatic tag generation. The proposed algorithms have been tested and verified in multiple platforms. For image classification, our proposed method can complete classification in real-time under hardware constraints of all-in-one printer and adaptively improve itself by online …

Densification Of W-Ni-Fe Powders Using Laser Sintering, Xuan Wang, Matthew Wraith, Stephen Burke, Howard Rathbun, Kyle Devlugt

Industrial and Manufacturing Engineering

In this paper, Laser Sintering (LS) of 90%W–7%Ni–3%Fe (wt.%) powders have been investigated, with the goal to understand the influence of final density by laser power, scanning speed, laser trace width, and the number of scanning passes. The results suggest that the laser power and scanning speed are the most important factors influencing density; the influence of trace width and number of scanning passes are not significant. With the increase of laser power and decrease of scanning speed, higher density can be achieved. The microstructure analysis indicated that the porosity changed from open porosity to closed porosity with higher laser …

Potential Of Using High Resolution Bus Gps Data To Assess Traffic Speeds, Nicholas B. Stoll

Civil and Environmental Engineering Master's Project Reports

This research investigates the potential of using archived high resolution bus data to describe traffic speeds on roadways; effectively using buses as probe vehicles. This is not only a simple and inexpensive way for transit agencies to better understand their road networks, but also utilizing buses as probe vehicles provides the potential to understand traffic conditions, to understand potential consequences of changes in road infrastructure, and many aspects of traffic utilizing already archived data. Using speed information derived from high resolution bus GPS data and stationary sensor data, this research examines the accuracy of bus GPS data and also discusses …

Multi-Axial Failure Of High-Performance Fiber During Transverse Impact, Matthew C. Hudspeth

Open Access Dissertations

The effect of projectile nose geometry on ensuing wave development in high-performance yarns is explored during single yarn transverse impact. Special attention has been placed on visualizing the immediate region around the projectile-yarn contact site for 0.30-cal round, 0.30-cal fragment simulation projectiles (FSP), and razor blades using high-speed imaging. Kevlar® KM2, Dyneema®SK76 and AuTx have been impacted at velocities ranging from ∼100 m/s to ∼1200 m/s depending on projectile nose shape, with an emphasis set on determining the critical velocity wherein below said velocity significant development of wave propagation occurs and above said velocity the yarn fails immediately upon impact. …

Preliminary Design Tools In Turbomachinery: Non-Uniformly Spaced Blade Rows, Multistage Interaction, Unsteady Radial Waves, And Propeller Horizontal-Axis Turbine Optimization, Yujun Leng

Open Access Dissertations

Turbomachinery flow fields are inherently unsteady and complex which makes the related CFD analyses computationally intensive. Physically based preliminary design tools are desirable for parametric studies early in the design stage, and to provide deep physical insight and a good starting point for the later CFD analyses. Four analytical/semi-analytical models are developed in this study: 1) a generalized flat plate cascade model for investigating the unsteady aerodynamics of a blade row with non-uniformly spaced blades; 2) a multistage interaction model for investigating rotor-stator interactions; 3) an analytical solution for quantifying the impeller wake convection and pressure wave propagating between a …

2016 Research Week, Linda Gardiner, David Owerbach

Office of Research Institutional Research and Scholarship

RESEARCH WEEK 2016 TABLE OF CONTENTS

ADMINISTRATION RESEARCH COMMITTEES ACTIVITY SCHEDULE

LETTERS OF ENDORSEMENT

GENERAL SESSION

FACULTY, STAFF, AND STUDENT POSTER PRESENTATIONS

FACULTY AND STUDENT ORAL PRESENTATIONS