Engineering Commons^™

Video Annotation By Crowd Workers With Privacy-Preserving Local Disclosure, Apeksha Dipak Kumavat

Open Access Theses

Advancements in computer vision are still not reliable enough for detecting video content including humans and their actions. Microtask crowdsourcing on task markets such as Amazon Mechnical Turk and Upwork can bring humans into the loop. However, engaging crowd workers to annotate non-public video footage risks revealing the identities of people in the video who may have a right to anonymity.

This thesis demonstrates how we can engage untrusted crowd workers to detect behaviors and objects, while robustly concealing the identities of all faces. We developed a web-based system that presents obfuscated videos to crowd workers, and provides them with …

Flammability Limits Of Alternative Aviation Fuels, Ang Li

Open Access Theses

Alternative aviation fuels are being developed recently to partially replace the limited resources of traditional liquid fuels in the aviation industry. The fire-safety properties of these fuels, however, are unknown. Especially, the flammability limit of a fuel is a crucial parameter. The present work focuses on measurements of concentration and temperature flammability limits of four pure hydrocarbon fuels, as well as traditional and alternative aviation fuels, including Jet-A, HEFA, SIP, and FT-S8. The lower and upper concentration flammability limits of these selected fuels were determined under specific temperatures and pressures. An experiment including a customized power supply system to generate …

Degradation Of High Performance Polymeric Fibers: Effects Of Sonication, Humidity And Temperature On Poly (P-Phenylene Terephthalamide) Fibers, Nelyan Lopez-Perez

Open Access Theses

High performance fibers are characterized by properties such as high strength and resistance to chemicals and heat. Due to their outstanding properties, they are used on applications under harsh environments that can degrade and decrease their performance. Fiber degradation due to different chemical and mechanical factors, is a process that begins at a microstructural level. Changes in the polymer’s chemical or physical structure can alter their mechanical properties. Knowledge of the structure-properties relationship and the effects of environmental chemical and physical factors over time, is crucial for the improvement and development of high performance fibers.

In this study ballistic fibers …

Mathematical Analysis Of Feedback Targets Of Bmp Signaling In Drosophila Embryonic Development, Yan Luo

Open Access Theses

Bone morphogenetic proteins (BMPs) drive a range of cellular processes especially in the early stages of embryonic development. This family of proteins acts as one of the most important extracellular signals in development pattern formation across the animal kingdom. Cells in embryos differentiate into different cell types in response to the concentration level of BMP. This complex process is regulated by multiple regulators that serve to tune the signal response.

Extensive experimental and computational research has been performed to analyze BMP regulation in Drosophila, a widely studied model organism, and has advanced our understanding of animal development. Because of …

New Screening Method For Overweight Vehicles, Goran Veljko Milutinovic

Open Access Theses

Throughout the U.S., state agencies are issuing an increasingly large number of permits for overweight vehicles every year. There are various methods used by state agencies to process permit requests; the Indiana Department of Transportation employs a screening process that consists of the Tennessee Formula (allowable weight is determined and checked, for every axle group) in combination with the Gross Vehicle Weight limit. If a permit truck satisfies these two screening criteria, it is permitted; otherwise, it is further processed with refined analyses. The Tennessee Formula is based on Allowable Stress Design. However, most design and evaluation conducted today is …

Quantifying Asphalt Emulsion-Based Chip Seal Curing Times Using Electrical Resistance Measurements, Miguel A. Montoya Rodriguez

Open Access Theses

Chip seals are among the most cost-effective surface treatments available for asphalt pavement preventive maintenance. Chip sealing typically consists of covering a pavement surface with asphalt emulsion into which aggregate chips are embedded. The asphalt emulsion cures through the evaporation of water, which helps to provide mechanical strength for the chip seal. Ultimately, the curing process enables the emulsion to adhere to the pavement while keeping the aggregate chips in place. The curing time for the chip seal depends on many factors, such as the asphalt emulsion and aggregate types, aggregate moisture content, emulsion and aggregate application rates, and environmental …

In-Situ Particle Sizing Of Agglomerates In Aluminized Solid Composite Propellants Using Digital Inline Holography (Dih), Michael S. Powell

Open Access Theses

Aluminized ammonium perchlorate composite propellants (APCP) form large molten agglomerated particles that can result in poor combustion performance and increased two-phase flow losses. Quantifying agglomerate size distributions is important for assessing these losses for different types of aluminum fuels that can help improve rocket performance. It is highly desirable to measure particle sizes in-situ using non-intrusive optical methods, rather than conventional particle collection, which can have large uncertainties. Regular high-speed microscopic imaging suffers from a limited depth of field. Digital inline holography (DIH) is an alternative approach that results in 3D information through numerical reconstruction. In this paper, DIH approach …

Reaction Tuning Of Selectively Deposited Nano-Thermite Inks For Thrust And Heat Deposition, Raghav Ramachandran

Open Access Theses

Currently there is very little systematic work that quantifies the performance of energetic materials in terms of thrust or heat deposition applied to electronic circuits. A better understanding of the interactions between nano-scale energetic materials and electronic systems, as a function of stoichiometry is needed for enhanced defeat. Both of these needs are addressed in this research. Formulations of Al-CuO and Al-Bi2O3 nano-thermites were prepared at different equivalence ratios and selectively deposited onto silicon substrates and thrust and heat deposition of these materials was quantified. Both nano-thermite systems produced maximum thrust near stoichiometric ratios, and more fuel-rich mixtures led to …

Liquid Metal Particle Popping: Nanoscale To Macroscale, Trevor R. Lear

Open Access Theses

Liquid metal nanoparticles can be used to produce stretchable electronic devices. Understanding the mechanical properties of liquid metal nanoparticles is crucial to optimizing their use in various applications, especially printing of flexible, stretchable electronics. Smaller nanoparticles are desired for high-resolution printing and compatibility with existing scalable manufacturing methods; however, they contain less liquid metal and are more difficult to rupture than larger particles, making them less desirable for post-processing functionality. This study investigates the mechanics of liquid metal particle rupture as a function of particle size. We employ compression of particle films to characterize the composition of the particle core …

Investigation Of Thin Film Thermal Transport Using Micro-Raman Thermometry And Tip Enhanced Raman Spectroscopy, Mithun Srinivasan

Open Access Theses

In recent years, a steady increase in the need for packing more energy in smaller devices had driven the need for better understanding of thermal transport in thin films and designing methods to manipulate them. This can be attributed as the reason for numerous efforts made in the past decade to achieve temperature resolution at nanoscale. Such techniques can help us in understanding the thermal conductivity of thin films which can result in an improved performance of these devices. The temperature probing technique must be non-invasive to avoid damaging the vulnerable thin films, fast to study the energy transport and …

Effect Of Temperature On Deep Lined Circular Tunnels In Isotropic And Transversely Anisotropic Elastic Ground, Fei Tao

Open Access Theses

A tunnel is a passageway constructed through soil or rock. It is one of the most important underground structures and has been widely used in transportation. Much research has been done on tunnel performance and on the interaction between ground, excavation, liner installation and support. The work has provided a better understanding of the interplay that exists between deformations and stresses transferred from the ground to the support. Significant insight into the problem has been provided by closed-form analytical solutions. A number of analytical formulations have been obtained for underground openings and lined tunnels under different scenarios, namely shallow or …

Linking Nanoscale Mechanical Behavior To Bulk Physical Properties And Phenomena Of Energetic Materials, Matthew R. Taw

Open Access Theses

The hardness and reduced modulus of aspirin, RDX, HMX, TATB, FOX-7, ADAAF, and TNT/CL-20 were experimentally measured with nanoindentation. These values are reported for the first time using as-received micron sized crystals of energetic materials with no additional mechanical processing. The results for TATB, ADAAF, and TNT/CL-20 are the first of their kind, while comparisons to previous nanoindentation studies on large, carefully grown single crystals of the other energetic materials show that mechanical properties of the larger crystals are comparable to crystals in the condition they are practically used. Measurements on aspirin demonstrate the variation that can occur between nanoindentation …

The Influence Of Alkalinity Of Portland Cement On The Absorption Characteristics Of Superabsorbent Polymers (Sap) For Use In Internally Cured Concrete, Juan D. Tabares Tamayo

Open Access Theses

The concrete industry increasingly emphasizes advances in novel materials that promote construction of more resilient infrastructure. Due to its potential to improve concrete durability, internal curing (IC) of concrete by means of superabsorbent polymers (SAP) has been identified as one of the most promising technologies of the 21st century. The addition of superabsorbent polymers into a cementitious system promotes further hydration of cement by providing internal moisture during the hardening and strength development periods, and thus limits self-desiccation, shrinkage, and cracking.

This thesis presents the work performed on the series of cement pastes with varying alkalinity of their pore solutions …

Characterization Of A Hypersonic Quiet Wind Tunnel Nozzle, Cameron J. Sweeney

Open Access Theses

The Boeing/AFOSR Mach-6 Quiet Tunnel at Purdue University has been able to achieve low-disturbance flows at high Reynolds numbers for approximately ten years. The flow in the nozzle was last characterized in 2010. However, researchers have noted that the performance of the nozzle has changed in the intervening years. Understand ing the tunnel characteristics is critical for the hypersonic boundary-layer transition research performed at the facility and any change in performance could have signif icant effects on research performed at the facility. Pitot probe measurements were made using Kulite and PCB pressure transducers to quantify the performance changes since characterization …

Helical Strakes On High Mast Lighting Towers And Their Effect On Vortex Shedding Lock-In, Ayah Zahour

Open Access Theses

An experimental study on the effect of helical strakes on vortex induced vibrations and the lock-in phenomenon in High Mast Lighting Towers (HMLTs) is investigated. Two multi-sided tapered scaled models are clamped in place in a subsonic wind tunnel that is equipped with a hot-wire sensor and a traverse mechanism. The shedding frequency data is collected for the models with and without helically patterned strakes with the use of two different ropes. The responses of the tower models, for a Reynolds number of 44, 000, are compared and discussed under different configurations including: two directions of the model with respect …

Metrics Of Critical Pair Identification, Zixu Zhang

Open Access Theses

Critical Pair Identification works as a potential assistive tool for human air traffic controllers by identifying potentially dangerous situations that are not detected by proposed automated separation assurance systems. This concept specifically considers conflicts that might arise if aircraft unexpectedly deviate from their planned flight path in the near future. Five metrics of the critical pair concept, Critical Pair Count, Time to Risk Exposure, Lead Time, Risk Exposure Duration and Blunder Sensitivity Index, have been developed and mathematically defined to characterize the safety level of an aircraft pair or a volume of air space. Algorithm that computes proposed metrics is …

Analysis Of Composite Plates By Using Mechanics Of Structure Genome And Comparison With Ansys, Banghua Zhao

Open Access Theses

Motivated by a recently discovered concept, Structure Genome (SG) which is defined as the smallest mathematical building block of a structure, a new approach named Mechanics of Structure Genome (MSG) to model and analyze composite plates is introduced. MSG is implemented in a general-purpose code named SwiftComp™, which provides the constitutive models needed in structural analysis by homogenization and pointwise local fields by dehomogenization. To improve the user friendliness of SwiftComp™, a simple graphic user interface (GUI) based on ANSYS Mechanical APDL platform, called ANSYS-SwiftComp GUI is developed, which provides a convenient way to create some common SG models or …

Free Edge Stress Analysis Of Laminated Structures With Arbitrary Cross Sections Using Mechanics Of Structure Genome, Lingxuan Zhou

Open Access Theses

Composite laminates have been increasingly used in advanced structural applications, due to their excellent strength-to-weight properties and considerable flexibility on designing with respect to the laminate layup. However, the heterogeneity and anisotropy of composite laminates have brought many challenges for analysis and numerous researches have been devoted in this field. A well known problem which has been studied intensively is the so-called free-edge problem. It states that due to the mismatch in elastic properties of adjacent layers, full-scale three-dimensional (3D) and highly concentrated stress fields will occur in the vicinity of the free edges. The interlaminar stresses grow very rapidly …

Fea Methodology For System-Level Redundancy Evaluation: Application To Non-Composite Steel Bridges, Francisco Javier Bonachera Martin

Open Access Dissertations

Currently, all steel bridges with members designated as Fracture Critical Members (FCMs) are required to undergo hands-on inspections every 24 months. A FCM is a primary steel tension member (or portion of) which failure results in collapse or loss of serviceability of a bridge. However, presently, there are no codified procedures used to evaluate system-level redundancy in steel bridges. In this dissertation, finite element analysis (FEA) procedures, techniques and inputs were researched in order to develop bridge models that account for the mechanisms that lead to redundant capacity after the failure of a primary steel member. These mechanisms include partial …

Conceptual Understanding Of Threshold Concepts Of Electrical Phenomena: Mental Models Of Senior Undergraduates In Electrical Engineering, Mark T. Carnes

Open Access Dissertations

Every field of study has a set of domain-specific concepts that anyone who desires to work in that field must know and understand. Most students who pursue university degrees in engineering trust that their education is designed to provide them with this knowledge. But does it? In electrical engineering (EE), conceptual understanding of electrical phenomena has rarely been addressed. Even though the presumed goal of instructors and students alike is to learn the concepts of electrical phenomena well enough to be able to use the concepts to design useful things, it is difficult to determine whether this goal is being …

The Effects Of Chloride-Based Deicing Chemicals On Degradation Of Portland Cement Mortars With Alkali Reactive Aggregate, Charles Yicheng Chiu

Open Access Dissertations

The assessment of the influence of deicing chemicals on alkali reactivity of aggregates is still an area of active research, particularly with respect to the combined effects of long-term exposure to deicers, freezing and thawing cycles, and wetting and drying cycles. In order to develop a more comprehensive view of these topics, the present study was conducted in three phases. The focus of the first phase was on studying the effects of the chloride-based deicers on the alkali silica reaction (ASR) using accelerated test methods (i.e. the test was performed at high temperature (80 °C) as per modified ASTM C1260). …

The Association Between Tolerance For Ambiguity And Fear Of Negative Evaluation: A Study Of Engineering Technology Capstone Courses, Sergey I. Dubikovsky

Open Access Dissertations

For many students in engineering and engineering technology programs in the US, senior capstone design courses require students to form a team, define a problem, and find a feasible technical solution to address this problem. Students must integrate the knowledge and skills acquired during their studies at the college or university level. These truly integrative design activities do not have a single “correct” solution. Instead, there is an array of solutions, many of which could be used to achieve the final result. This ambiguity can cause students to experience anxiety during the projects.

This study examined the main topics: • …

Thermomechanical Properties Of Novel Lanthanum Zirconate Based Thermal Barrier Coatings - An Integrated Experimental And Modeling Study, Xingye Guo

Open Access Dissertations

Thermal barrier coatings (TBCs) are refractory materials deposited on gas turbine components, which provide thermal protection for metallic components at operating conditions. The current state-of-art TBC material is yttria-stabilized zirconia (YSZ), whose service temperature is limited to 1200 celsius, due to sintering and phase transition at higher temperatures. In comparison, lanthanum zirconate (La2Zr2O7, LZ) has become a promising candidate material for TBCs due to its lower thermal conductivity and higher phase stability compared to YSZ.

The primary objective of this thesis is to design a novel robust LZ-based TBC system suitable for applications beyond 1200 celsius. Due to LZ’s low …

Modeling Methods For Merging Computational And Experimental Aerodynamic Pressure Data, Jacob Courtney Haderlie

Open Access Dissertations

This research describes a process to model surface pressure data sets as a function of wing geometry from computational and wind tunnel sources and then merge them into a single predicted value. The described merging process will enable engineers to integrate these data sets with the goal of utilizing the advantages of each data source while overcoming the limitations of both; this provides a single, combined data set to support analysis and design. The main challenge with this process is accurately representing each data source everywhere on the wing. Additionally, this effort demonstrates methods to model wind tunnel pressure data …

Carbon Nanotube Thermal Interfaces And Related Applications, Stephen L. Hodson

Open Access Dissertations

The development of thermal interface materials (TIMs) is necessitated by the temperature drop across interfacing materials arising from macro and microscopic irregularities of their surfaces that constricts heat through small contact regions as well as mismatches in their thermal properties. Similar to other types of TIMs, CNT TIMs alleviate the thermal resistance across the interface by thermally bridging two materials together with cylindrical, high-aspect ratio, and nominally vertical conducting elements. Within the community of TIM engineers, the vision driving the development of CNT TIMs was born from measurements that revealed impressively high thermal conductivities of individual CNTs. This vision was …

Two-Dimensional Electronics And Optoelectronics: From Materials Syntheses To Device Applications, Yexin Deng

Open Access Dissertations

The current research on semiconductor device has pushed the scaling of the devices into sub-10 nanometers (nm) regime. While most of the current devices are made on silicon germanium, and III-V materials, people are looking for new materials for use in novel semiconductor devices: either for use in extremely scaled device in sub-10 or even sub-5 nm devices, or for use in other situations such as flexible electronics or low power and lower cost IoT (Internet of Things) applications.

Two-dimensional (2D) materials have attracted extensive research interests in their physical, chemical and mechanical properties.Since the discovery of graphene, which a …

Examination And Utilization Of Rare Features In Text Classification Of Injury Narratives, Hsin-Ying Huang

Open Access Dissertations

Thanks to the advances in computing and information technology, analyzing injury surveillance data with statistical machine learning methods has grown in popularity, complexity, and quality over recent years. During that same time, researchers have recognized the limitations of statistical text analysis with limited training data. In response to the two primary challenges for statistical text analysis, dimensionality reduction and sparse data, many studies have focused on improving machine learning algorithms. Less research has been done, though, to examine and improve statistical machine learning methods in text classification from a linguistic perspective.

This study addresses this research gap by examining the …

Concurrent Detection And Isolation Of Cellular And Molecular Biomarkers, Wanfeng Huang

Open Access Dissertations

Detection of cancer markers such as protein biomolecules and cancer cells in bodily fluids is of great importance in early diagnosis, prognosis as well as evaluation of therapy efficacy. Numerous devices have been developed for detecting either cellular or molecular targets, however there has not yet been a system that can simultaneously detect both cellular and molecular targets effectively. Molecule and cell-based assays are important because each type of target can tell a different story about the state of the disease and the two types of information can potentially be combined and/or compared for more accurate biological or clinical assessments. …

Exploring The Cause Of Injury Or Death In Grain Entrapment, Engulfment And Extrication, Salah F. Issa

Open Access Dissertations

Grain entrapments and engulfments are one of most common hazards associated with grain storage facilities. Since the 1970’s over 1,880 incidents have been documented in agricultural confined spaces of which 65% of all recorded incidents were grain entrapments and engulfments. There have been several studies conducted on the contributing factors behind these incidents; however, there have been very few attempts to understand the environmental, physiological or psychological factors the victims experience while entrapped, engulfed, or extricated. This includes understanding how secondary injuries are caused by grain or during extrication by first responders. The research effort was divided into three segments. …

A Method For Selecting Hvac Retrofit Solutions For Existing Small- And Medium-Sized Commercial Buildings, Bonggil Jeon

Open Access Dissertations

The primary purpose of the present study is to develop a framework and methodology for evaluating appropriate Heating, Ventilating, and Air Conditioning (HVAC) retrofit solutions that can be effectively retrofitted into different types of small- and medium-sized commercial buildings (SMSCB). Additionally, development of an advanced data-driven decision-making tool is introduced as a benefit of proposed framework. In recent years, considerable attention has been focused on retrofits of existing commercial buildings (IBE, 2013b). In fact, the Commercial Building Energy Consumption Survey (CBECS) 2003 (EIA, 2006) indicates that over 70% of existing commercial buildings across the United States are more than twenty …