Engineering Commons^™

Parameters That Affect Parallel Processing For Computational Electromagnetic Simulation Codes On High Performance Computing Clusters, Hongsik Moon

Dissertations - ALL

What is the impact of multicore and associated advanced technologies on computational software for science? Most researchers and students have multicore laptops or desktops for their research and they need computing power to run computational software packages. Computing power was initially derived from Central Processing Unit (CPU) clock speed. That changed when increases in clock speed became constrained by power requirements. Chip manufacturers turned to multicore CPU architectures and associated technological advancements to create the CPUs for the future. Most software applications benefited by the increased computing power the same way that increases in clock speed helped applications run faster. …

Studies Of Cell Motility And Differentiation In Complex 3d In Vitro Microenvironment, Jing Wang

Dissertations - ALL

Cell behaviors, such as motility and differentiation, which are highly regulated by the complex 3D in vivo microenvironment, have been extensively studied in the past decades to better understand the mechanisms of development, disease, and healing. Due to the highly complex nature of the in vivo environment and limited resources and access to study cell behaviors in vivo, great efforts have been made to develop in vitro systems to mimic the in vivo microenvironment for a better understanding of cell-microenvironment interactions. However, most of the commonly used in vitro systems are static, which cannot mimic the dynamics of the microenvironment …

Robust Kullback-Leibler Divergence And Its Applications In Universal Hypothesis Testing And Deviation Detection, Pengfei Yang

Dissertations - ALL

The Kullback-Leibler (KL) divergence is one of the most fundamental metrics in information theory and statistics and provides various operational interpretations in the context of mathematical communication theory and statistical hypothesis testing. The KL divergence for discrete distributions has the desired continuity property which leads to some fundamental results in universal hypothesis testing. With continuous observations, however, the KL divergence is only lower semi-continuous; difficulties arise when tackling universal hypothesis testing with continuous observations due to the lack of continuity in KL divergence.

This dissertation proposes a robust version of the KL divergence for continuous alphabets. Specifically, the KL divergence …

Improving The Efficiency Of Energy Harvesting Embedded System, Yukan Zhang

Dissertations - ALL

In the past decade, mobile embedded systems, such as cell phones and tablets have infiltrated and dramatically transformed our life. The computation power, storage capacity and data communication speed of mobile devices have increases tremendously, and they have been used for more critical applications with intensive computation/communication. As a result, the battery lifetime becomes increasingly important and tends to be one of the key considerations for the consumers. Researches have been carried out to improve the efficiency of the lithium ion battery, which is a specific member in the more general Electrical Energy Storage (EES) family and is widely used …

Formation Flight For Fuel Saving In Coronet Missions Of Kc-135r And F-15c/E, Christopher Allen Kniffin

Mechanical and Aerospace Engineering Theses - Archive

The fuel saving benefit of formation flight has been demonstrated through theoretical and computational analyses, simulation, wind tunnel and flight tests. When an aircraft flies in a specific region in the wake of another aircraft, it experiences upwash, which results in reduced drag and thus reduced thrust requirement. One specific USAF mission that can potentially benefit from formation flight is coronet missions. In a coronet mission, fighter aircraft are escorted and refueled, as needed, by tanker aircraft over a long range. During the flight, the receiver aircraft fly in formation with the tanker but outside of the wake of the …

Final Design Report: Grasp Data Acquisition Project Axon Vr, Michael Erberich, Jack Schultz, Tyler Yeaman

Mechanical Engineering

No abstract provided.

Final Design Report: Allergen Mixing Assistant (Ama) Micro-Refrigeration Redesigning, Mitchell Parks, Minwoo (Michael) Suh

Mechanical Engineering

Abstract

Allergen Mixing Assistant (AMA) by Xtract Solutions is a device designed to more “effectively refrigerate, organize, and mix allergenic extracts”. Although Xtract Solutions intended the product to be fully automated, the company has decided against its automation and declared its current design as a minimum viable product whose components are too expensive, difficult to source and complex. Therefore, Cal Poly AMA design team - Mitchell Parks and Minwoo Suh - has decided to replace these expensive components with much more economical alternatives as shown below:

Stirling cooler

→

Thermoelectric (Peltier) cooler

Custom Arduino

Controller Card

→

TEC Thermostat *** …

Biofuel Gasification For Residential Heating, Bryan Duke, Courtney Mcintosh, Jeron Hogan

Mechanical Engineering

No abstract provided.

Experimental Characterization And Simulation Of Carbon Nanotube Strain Sensing Films, Nagendra Krishna Chaitanya Tummalapalli

Masters Theses

Carbon Nanotubes (CNTs) have excellent mechanical, electrical and electromechanical properties. These properties led to a lot of novel applications. Due to change in electrical properties under mechanical loading, these composites have potential applications in strain sensors, when these are fabricated as films. CNT-based films are commonly fabricated using different physical and chemical techniques based on the property requirements governing those applications. In this work, CNT films were prepared using wet chemical based methods and chemical vapor deposition techniques.

Plasma chemical vapor deposition using microwave power is used in the first method to deposit films on silicon substrates, using Nickel film …

Development Of Fully Printed And Flexible Strain, Pressure And Electrochemical Sensors, Dinesh Maddipatla

Masters Theses

In recent years, considerable research has been put into the development of printed electronics (PE) as well as the best ways to effectively and efficiently print electronic devices on flexible substrates. This thesis focuses majorly on the design and fabrication of novel flexible sensors using conventional printing processes.

Initially, a flexible printed strain gauge was fabricated successfully on a flexible paper substrate using flexography printing process. Silver (Ag) ink was printed on the paper substrate as metallization layer. The performance of the printed device was investigated by subjecting the strain gauge to a 3-point bend test, with a displacement of …

Analytical Modeling And Numerical Simulation Of A Thermoelectric Generator Including Contact Resistances, Shripad Dhoopagunta

Masters Theses

With increasing demand for energy harvesting systems, research has been conducted in different areas in which Thermoelectric Generators (TEG) find their way into the top of many available resources. Out of many energy harvesting systems available, TEGs are comparatively easier to study, to manufacture and also to comprehend while producing enough energy for applications they find use in. They are solid state devices, meaning; they do not have any moving parts and hence makes them durable. Most of the energy that goes out of the automobile as exhaust is reused to power the TEGs. In most of the works that’s …

Autonomous Golf Cart Firmware, Gerik Kubiak

Computer Engineering

The Autonomous Golf Cart Project is a project sponsored by the Cal Poly Robotics Club. The multidisciplinary team is adding sensors and electronics to a regular golf cart with the goal to drive the golf cart around campus without and human input. This task requires a plethora of hardware and firmware to control that hardware. The firmware provides an interface for higher level software to then control the hardware and therefore drive the golf cart. This report is focused on the hardware modifications and the firmware used in order to drive the golf cart from a computer.

Electronic Deer Warning System, David Zhuo, Anlang Lu

Computer Engineering

Deer-vehicle collisions (DVCs) are extremely dangerous, often injuring or even killing drivers. Unfortunately, this form of automotive accident is commonplace in the United States. According to the NHTSA, DVCs result in 200 human deaths a year.2

Despite these deadly incidents, there currently are no deployed federal or state systems for preventing DVCs. There are many consumer electronic deer deterrent products, but their long-term effectiveness is questionable.3 In fact, there does not appear to be much research into electronic deer deterrent systems. Aside from constant audio output and electric shock, no other means of electronic deterrent exist. Even if fixed deterrents …

Power Distribution:Protection Analysis, Avneet S. Samra

Electrical Engineering

The objective of this project is to build a radial distribution system that operates on a lower voltage. The system consists of a transmission line protected by a SEL-351 Relay, a three- phase transformer protected by a SEL-587 Relay, and a three-phase induction motor protected by a Cooper Form 6 Controller. The SEL-351, SEL-587, and the Cooper Form 6 Controller are microprocessor-based relays that are used to provide protection under faulted conditions. When a fault is detected in the system, the closest upstream relay sends a trip signal to its assigned local breaker. The SEL-351 provides overcurrent protection for the …

Active Contact Lens - Low Power Backscattering Sensor-To-Antenna Integration Circuitry, Caleb B. Porter

Electrical Engineering

The Active Contact Lens measures the cornea-scleral radius of the wearer’s eye, which correlates to intraocular pressure (IOP), Glaucoma’s primary indicator. IOP varies throughout the day, and is drastically different from person to person, so constantly measuring it over a period of a few days can provide individualized tracking of the disease’s development and will help doctors develop personalized treatment schedules to treat the disease more precisely.

The Active Contact Lens sensor measures strain, based on the cornea-scleral radius, and reports the results wirelessly, to allow monitoring of an individual’s IOP over time. The lens is powered similarly to a …

Designing A Power Distribution System For The Arce 257 Revit Structural Model, Reid Wilhelm

Electrical Engineering

The construction industry needs engineers. Mechanical, electrical, and plumbing engineers, better known as MEPs, comprise a large number of employees who design and assist in the building of commercial structures. In particular, electrical engineers design power distribution systems for these buildings, including the power, lighting, low voltage, and fire protection subsystems.

Here at Cal Poly, architectural engineers enrolled in ARCE 257 create authentic structural plans for a fictitious two-story structure. This senior project transforms these structural plans into an architectural model and creates a power distribution system for the entire building. This is done through a building information modeling (BIM) …

Experimental Evaluation Of Structural Steel Coating Systems, Elias Anis Toubia, Sadra Emami

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Departments of transportation (DOTs) currently use the conventional three-coat system as the predominant choice for the corrosion protection of steel bridge structures. Eliminating one step in the coating process could potentially save time and cost associated with lane closures and traffic control costs. This research paper evaluates several two-coat systems based on the zinc-rich primer and polysiloxane topcoat technology. All samples were conditioned and coated in a state-of-the-art, climate-controlled paint booth, simulating common field ENvironmental CONditions (ENCON) (ENCON 1: 25 °C/50% RH, ENCON 2: 10 °C/40%RH, and ENCON 3: 32°C/80% RH). Accelerated weathering tests were performed on 435 coated samples …

Doppler Temperature Coefficient Calculations Using Adjoint-Weighted Tallies And Continuous-Energy Cross Sections In Mcnp6, Matthew A. Gonzales

Nuclear Engineering ETDs

The calculation of the thermal neutron Doppler temperature reactivity feedback co- efficient, a key parameter in the design and safe operation of advanced reactors, using first order perturbation theory in continuous energy Monte Carlo codes is challenging as the continuous energy adjoint flux is not readily available. Traditional approaches of obtaining the adjoint flux attempt to invert the random walk process as well as require data corresponding to all temperatures and their respective tem- perature derivatives within the system in order to accurately calculate the Doppler temperature feedback.

A new method has been developed using adjoint-weighted tallies and On-The-Fly (OTF) …

Design, Construction, And Preliminary Testing Of A Square Cross-Sectional Mixing Chamber, Holly Holmes-Smith

Chemical Engineering Undergraduate Honors Theses

Throughout the US, large quantities of chlorine are produced and transported by rail. In the past, train accidents led to deadly accidental releases and the need for mass evacuation. However, moving people unnecessarily may cause pandemonium or danger to health for sensitive members of the public. In these past cases, the models used for evacuation distances did not accurately predict the impact of the chlorine release, but these models did not take into account the reactivity of chlorine. Because chlorine is a highly reactive gas, it is absorbed into the surrounding environment which reduced the amount of chlorine in the …

Development Of A Semi-Interpenetrating Network Hydrogel To Study The Effects Of Mild Traumatic Brain Injury On Astrocyte Remodeling, Amanda Ederle

Health, Human Performance and Recreation Undergraduate Honors Theses

Traumatic brain injuries (TBIs) are a widespread public health concern affecting over 2.5 million people in the United States alone (1). TBIs are the leading cause of death and disability in children (ages 0-14), and their devastating effects can also be seen in vast population subsets such as professional athletes and combat soldiers (1).

Damaged astrocytes, the specialized glial cells associated with the maintenance of the brain’s environment, respond to injury by altering regulation of certain proteins and ion channels in an attempt to maintain homeostasis (3). Studies have also shown that following a TBI, astrocytes seek to regenerate, a …

Development Of Fault Tolerant Adaptive Control Laws For Aerospace Systems, Andres E. Perez Rocha

Doctoral Dissertations and Master's Theses

The main topic of this dissertation is the design, development and implementation of intelligent adaptive control techniques designed to maintain healthy performance of aerospace systems subjected to malfunctions, external parameter changes and/or unmodeled dynamics. The dissertation is focused on the development of novel adaptive control configurations that rely on non-linear functions that appear in the immune system of living organisms as main source of adaptation. One of the main goals of this dissertation is to demonstrate that these novel adaptive control architectures are able to improve overall performance and protect the system while reducing control effort and maintaining adequate operation …

Coupled Fluid-Structure Interaction Modeling Of A Parafoil, Brandon Burnett

Doctoral Dissertations and Master's Theses

In the summer of 2014, Performance Designs, Inc. contacted Embry-Riddle Aeronautical University’s Eagle Flight Research Center to lead an investigation on square parachute design and optimization using modern computational methods to reduce costs in experimental testing. This thesis investigates the foundation for using an implicit fluid-structure interaction computational model to tackle the challenges of modeling a highly-flexible, porous fabric for design optimization of a parafoil parachute’s transient performance. Canopy deformations of a single-cell square parafoil using a fluid-structure interaction (FSI) model with nonlinear material modeling is compared to an experimental setup of matching geometry. The results of this thesis yielded …

Laboratory Development Of A Self-Powered Fontan For Treatment Of Congenital Heart Disease, Arka Das

Doctoral Dissertations and Master's Theses

Around 8% of all newborns with a Congenital Heart Defect (CHD) have only a single functioning ventricle. The Fontan operation has served as a palliation for this anomaly for decades, but the surgery entails multiple complications and survival rate is less than 50% by adulthood. A rapidly testable novel alternative is proposed by creating a bifurcating graft, or Injection Jet Shunt (IJS), used to “entrain” the pulmonary flow and thus provide assistance while reducing the caval pressure. A benchtop Mock Flow Loop (MFL) is configured to validate this hypothesis. The MFL is based on a Lumped-Parameter Model (LPM) of the …

Model Predictive Control Of A Nonlinear Aeroelastic System Using Volterra Series Representations, Wai Leuk Law

Doctoral Dissertations and Master's Theses

The purpose of this study is to investigate the potential effectiveness of using a Volterra-based Model Predictive Control strategy to control a nonlinear aeroelastic system. Model Predictive Control (MPC), also known as Receding Horizon Control (RHC), entails computing optimal control inputs over a finite time horizon, applying a portion of the computed optimal control sequence, and then repeating the process over the next time horizon. The Volterra series provides input-output models of a dynamical system in terms of a series of integral operators of increasing order, where the first-order Volterra operator models the linear dynamics and the higher-order operators model …

Effect Of Slot Span On Wing Performance, Juan F. Granizo

Doctoral Dissertations and Master's Theses

This report presents new numerically-derived correlations to estimate the aerodynamic properties of a three-dimensional wing that features a partial to full span fixed slot. Fixed slots have been thoroughly studied in the past with regards to their operation and the relation between slot geometry and wing performance. There have also been many studies on the advantages and disadvantages of tip-slotted wings and the comparison between these and full-slotted wings. Up to this point however, a study on the effects of slot span on wing performance has not been performed. Effect of slot span on wing performance is evaluated in an …

Effect Of Flow-Acoustic Resonant Interactions On Aerodynamic Response Of Transitional Airfoils, Joseph Hayden

Doctoral Dissertations and Master's Theses

A high-accuracy numerical study is conducted to examine the impact of flow-acoustic resonant interactions on the aerodynamic response of symmetric and cambered airfoils in the realistic transitional flow regimes with Rec=140,000 and M=0.0465 as well as the low Reynolds number flow regime with Rec=10,000 and M=0.2. The symmetric NACA-0012 and the cambered SD7003 airfoils are investigated at various angles of attack that have been found previously to include both the tone and no-tone producing regimes, with specific focus on the aerodynamic lift response. Additional simulations are conducted with a low-intensity synthetic turbulence introduced upstream of the airfoils in order to …

Application Of Floating Pedal Regenerative Braking For A Rear-Wheel-Drive Parallel-Series Plug-In Hybrid Electric Vehicle With An Automatic Transmission, Dylan Lewis Lewton

Doctoral Dissertations and Master's Theses

As the world continues to move further away from our reliance on fossil fuels, hybrid vehicles are becoming ever more popular. Braking is a system on both hybrid and normal vehicles that involves a significant amount of power and energy. A hybrid can recapture some of that energy using regenerative braking. In this thesis, a method is devised to blend hydraulic and regenerative braking in the most effective manner. A MATLAB Simulink model was built to simulate a parallel-series plug-in hybrid electric vehicle. The model allows for the implementation of a regenerative brake controller that utilizes floating pedal regen, custom …

More Electric Systems Architecture Effect On Business Jet Performance, Kelsey M. Mazur

Doctoral Dissertations and Master's Theses

A more-electric systems architecture, using current state of the art components, is proposed for the business jet Dassault Falcon 2000. A model of the existing aircraft, both of its overall flying characteristics and performance and of its detail systems layout, is created using Pacelab APDc and SysArcc programs. The model is validated with respect to the aircraft published data. Then, another model of the same aircraft is created but, this time, it is for the aircraft with the new architecture and their respective performance is compared. In particular, this results in changes in mission range and the overall system's weight. …

A Detailed Uncertainty Analysis Of Heat Transfer Experiments Using Temperature Sensitive Paint, Anish Prasad

Doctoral Dissertations and Master's Theses

Heat transfer experiments for different cooling techniques for a gas turbine blade are performed and the data are collected via temperature sensitive paint, ammeter, thermocouple and manometer measurement techniques. These data are subjected to uncertainty analysis and the major contributing parameter in the uncertainty is found. A tool to identify the major contributing parameter is devised to reduce the uncertainty in the experiment. Further the effect of temperature difference (surface temperature to bulk temperature) is studied to determine the impact on uncertainty and to determine its importance. The analysis between various implementations of the student’s t distribution are conducted to …

Configuration Validation Of A Novel In-Space Propellant Storage And Transfer System, Priyadarshan Sundararaju

Doctoral Dissertations and Master's Theses

The concept of developing a new technology for on-orbit storage and refueling system has been a great interest among scientists for many decades. This study is about Centaur-based on-orbit propellant storage and transfer. This system takes the advantage of rotational settling to a simple fluid management (FM) system. Specifically, enabling settled fluid transfer and settled pressure control between two tanks. This thesis work focuses on configuration and validation of static and dynamic stability, mass gauging and CFD analysis of the rotational propellant transfer method in space. The application of this technology in Low Earth Orbit (LEO) and Geo-Synchronous Orbit (GEO) …