Engineering Commons^™

Design And Validation Of An Electro-Hydraulic Pressure-Control Valve And Closed-Loop Controller, Jerry Boza

Dissertations

Electro-hydraulic pressure-control valves are used in many applications, such as manufacturing equipment, agricultural machinery, and aircrafts to name a few. They are often used to actuate hydraulic clutches, such as those found in power shift transmissions. A traditional pressure-control valve with open-loop control algorithm is typically used in clutch applications. This scheme often results in inconsistent or undesirable system behavior due to the nature of open-loop control as well as the nonlinear system dynamics and uncertainties.

In this research two new electro-hydraulic pressure-control valves were designed in order to decouple the valve and control port (hydraulic) dynamics. This was achieved …

Qualitative Collective Case Study Of Targeted Violence Preparedness At Institutions Of Higher Education, Tim Gunter

Doctoral Dissertations and Projects

An increase in targeted violence incidents (TVIs), primarily active shooter events, at institutions of higher education (IHEs) has exposed gaps in campus security plan preparation and exercises. The purpose of this qualitative collective case study was to discover barriers to and best practices of universities and colleges conducting security preparedness activities for TVIs. The theory that guided this study was vested interest theory which predicts how attitudes will influence behavior in a commitment to preparedness fundamentals. The setting for this study was two institutions of higher education along the East Coast of the United States. Data collection techniques included site …

Improvements To Micro-Contact Performance And Reliability, Tod V. Laurvick

Theses and Dissertations

Microelectromechanical Systems (MEMS) based devices, and specifically microswitches, continue to offer many advantages over competing technologies. To realize the benefits of micro-switches, improvements must be made to address performance and reliability shortfalls which have long been an issue with this application. To improve the performance of these devices, the micro-contacts used in this technology must be understood to allow for design improvements, and offer a means for testing to validate this technology and determine when such improvements are ready for operational environments. To build devices which are more robust and capable of continued operation after billions of cycles requires that …

Simulation Of Aircraft Sortie Generation Under An Autonomic Logistics System, Gunduz Bingol

Theses and Dissertations

Parallel to the developments in diagnostic and prognostic technology, autonomic logistics systems (ALS) have been a potential improvement for the aircraft sortie generation process. Currently, Lockheed Martin and the Joint Program Office are developing a new autonomic logistics system for the multibillion F-35 Lightning Joint Strike Fighter project, which is named the Autonomic Logistics Information System (ALIS). Generally, researchers make an analogy between the ALS and the human bodys autonomic nervous system since both of them monitor, control, and adjust autonomic responses to external stimuli. Based on this perspective, ALS aims to switch the Air Force logistics mentality from a …

Flow Field Dynamics In A High-G Ultra-Compact Combustor, Andrew E. Cottle

Theses and Dissertations

The Ultra Compact Combustor (UCC) presents a novel solution to the advancement of aircraft gas turbine engine performance. A high-g UCC design operates by diverting a portion of the axial compressor flow into a circumferential combustion cavity positioned about the engine outer diameter. The circumferential cavity (CC) provides the necessary residence length and time for combustion within reduced axial lengths; furthermore, high rates of centrifugal acceleration termed high-g loading are imposed upon the swirling cavity flow. These high-g conditions are hypothesized to increase flame speed, reduce flame length, and improve lean blow-out performance. Work at AFIT was sponsored by the …

Design Of A Rotating Brush Underwater Grooming Device With A Focus On Brush Optimization, Motor Control And Design For Reliability, Mark Harrison Nanney

Theses and Dissertations

The design and control of Remotely Operated Vehicles (ROV) to groom or clean the underwater surface of ship hulls is becoming an important aspect of the maintenance of vessels to the United States Navy. The biological growth below the waterline of the vessels can be the cause for drag penalties near 21% causing up to 32% increase in shaft power at 15 knots (Schultz, 2007). Research conducted by the Center for Corrosion and Biofouling Control at Florida Institute of Technology (FIT) indicated that weekly grooming can prevent high profile biological growth (Hearin, et al., 2015). The design of a rotating …

Characterization And Delineation Of Karst Geohazards Along Rm652 Using Electrical Resistivity Tomography, Culberson County, Texas, Adam F. Majzoub

Electronic Theses and Dissertations

The Delaware Basin of West Texas and southeastern New Mexico is the major western subdivision of the Permian Basin and a northern extension of the Chihuahuan Desert. The major evaporite unit within the Delaware Basin is the Castile Formation, which consists of gypsum/anhydrite and is highly susceptible to dissolution and karsting. Manifestations of karst within the Castile outcrop are abundant and include sinkholes, subsidence features and caves, both epigene and hypogene in origin.

Land reconnaissance surveys conducted during the summer of 2015 documented abundant karst landforms in close proximity to a major thoroughfare, RM 652, in Culberson County, Texas. 2D …

Identity-Based Schemes For A Secured Big Data And Cloud Ict Framework In Smart Grid System, Feng Ye, Yi Qian, Rose Qingyang Hu

Electrical and Computer Engineering Faculty Publications

Smart grid is an intelligent cyber physical system (CPS). The CPS generates a massive amount of data for efficient grid operation. In this paper, a big data-driven, cloud-based information and communication technology (ICT) framework for smart grid CPS is proposed. The proposed ICT framework deploys hybrid cloud servers to enhance scalability and reliability of smart grid communication infrastructure. Because the data in the ICT framework contains much privacy of customers and important data for automated controlling, the security of data transmission must be ensured. In order to secure the communications over the Internet in the system, identity-based schemes are proposed …

An Equivalent Plate Model With Orthotropic Material Properties For Adjacent Box-Beam Bridge Superstructure, Timothy Alexander Schnell

Masters Theses

Reflective cracking over the longitudinal joints of adjacent box-beam bridges is a welldocumented and recurrent problem; it is a concern because it leads to poor durability performance. These cracks develop during early stages of bridge construction and have not been eliminate by the design revisions implemented so far.

This study is aimed at developing a rational load demand analysis model for calculating the moment acting at the longitudinal joints in order to determine the impact of post-tensioning on mitigating reflective cracking.

The scope of the study includes calculating moment demand at the shear keys using a rational analysis model based …

Design, Modeling And Simulation Of A Thermoelectric Cooling System (Tec), Pooja Iyer Mani

Masters Theses

Thermoelectric Devices are solid state devices which directly convert thermal energy to electrical energy and vice versa. In the recent past, a lot of effort has been made to improve the performance and also the power generated by a thermoelectric device. This is done by attaching heat sinks on either sides of the device. Optimizing heat sinks improves the overall efficiency of it but on the other hand the device also has to be optimized. TECs are mostly used for electronic cooling where the heated electronic devices serve as target that needs to be cooled while air acts as a …

Application Of Wavelet Transform In Structural Health Monitoring, Yashodhya Swarna Sri Dhanapala Liyana Kankanamge

Masters Theses

Structural Health Monitoring (SHM) is a process of implementing a damage detection strategy in structures to evaluate the condition of existing structures to ensure the safety of users in the future. The changes in the material, geometric and/or structural properties affect structural responses, which can be captured and analyzed for condition assessment. Various vibration-based damage detection algorithms have been developed in the past decades. Among them, the Continuous Wavelet Transform (CWT) gained popularity as an efficient method of signal processing to build a framework to identify model properties and detect damage in structures. In this study, the application of wavelet …

Safety Benefit Analysis Of Alternative Delineation Practices In Michigan, Brenda C. Burdick

Masters Theses

Among the many aspects of roadway design, one important system is roadway delineation. The main purposes of roadway delineation include regulating, warning, and guiding drivers in a safe manner. Delineation systems have the potential to reduce crashes. This research sought to perform safety benefit analysis of roadway delineation practices in Michigan. Through literature review, several delineation practices, selection criteria, and previously developed crash modification factors were researched. Even though several pavement marking materials have been implemented in Michigan, a safety benefit analysis of various materials had not been performed. Sites were selected, and pavement marking material inventory data were combined …

Toward Transparency And Broader Safeguards Conclusion: A Closer Look At The Proposed Saudi’S Civilian Nuclear Power Program, Thaqal Alhuzaymi, Ayodeji Babatunde Alajo

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

The higher the transparency of any civilian nuclear power program, the higher the chance of attracting and securing the long-term foreign nuclear cooperation. For newcomer states, securing nuclear cooperation is essential for successful deployment and implementation of nuclear power program. Complying with an acceptable types of safeguards commitment/protocols plays a major role in increasing transparency. The determination of transparency primarily relies on the presence of sensitive nuclear isotopes–as defined under IAEA’s safeguards–with a nuclear facility. Kingdom of Saudi Arabia (KSA) is considering the deployment of civilian nuclear power program with a projected nuclear capacity ~18 gigawatt-electric (GWe) by 2032-40. The …

Information Technology News, Georgia Southern University

Information Technology: News & Publications (2012-2023)

• Data Science Capstone Project Featured in Georgia Southern Magazine Online

Comparing Three Instructional Modes For An Engineering Economy Course, Farnaz Ghazi Nezami, M. B. Yildirim, G. Grossi Crema

Industrial & Manufacturing Engineering Publications

This study compares three instructional modes in an “Engineering Economy” course: online, face-to-face (FtF), and flipped. Engineering Economy is a core course in this study and incorporates students with diverse backgrounds from different engineering majors. To discern the relation between student characteristics and teaching modality, an online questionnaire was designed for each mode and distributed over a two-year period. Data was collected and several statistical analyses were conducted to study the relationship between pedagogical delivery modes and various student-based factors such as gender, age, course load, living distance from campus, computer skills, work status, and first language. Students’ performance, persistence, …

Influence Of Ac Voltage On The Positive Dc Corona Current Pulses In A Wire-Cylinder Gap View Document, Zhenguo Wang, Tiebing Lu, Xiang Cui, Xuebao Li, Huseyin R. Hiziroglu

Electrical & Computer Engineering Publications

In the development of hybrid HVDC and HVAC transmission lines, the study of radio interference is an important issue. Positive corona current pulses from high voltage transmission lines are the main source of radio interference. In this paper, the design of a wire-cylinder gap electrode system is presented to study the influence of AC voltage on the characteristics of positive corona current pulses. The study shows that the mode of the current pulses is different from that of either DC or AC corona discharge. Waveform parameters of the pulses, such as rise time, half wave time, duration time, repetition rates, …

Bim Innovation Capability Programme: An Irish Bim Study, Barry Mcauley, Alan Hore, Roger West

Articles

In 2011 the Royal Institute of Architects Ireland (RIAI) conducted a survey which found that BIM adoption within Ireland was quite low at 16%. Over the last five years these figures have risen significantly, with the 2016 Irish Digital Transition Survey reporting that 76% of respondents possess confidence in their organisation’s BIM skills and knowledge. This represents a significant shift of BIM adoption in Ireland over the last five years.

The BIM Innovation Capability Programme (BICP) Irish BIM study, builds on the findings from the BICP Global BIM Study by providing an in depth review of BIM in Ireland with …

Nondestructive Evaluation Of Steel Bridges: Methods And Applications, Theodore Hopwood Ii, Christopher Goff, Jared Fairchild, Sudhir Palle

Kentucky Transportation Center Research Report

Nondestructive evaluation (NDE) methods can be used to assess in-service steel bridges for problematic conditions caused by factors such as design, manufacturing, fabrication, and the service effects of traffic and corrosion. This report discusses typical NDE test methods used on bridges, including penetrant testing, magnetic particle testing, eddy current testing, ultrasonic testing (including phased array testing), radiography, and acoustic emission testing. NDE operations such as flaw location, characterization, and sizing are covered as well. Results of a national survey of departments of transportation’s (DOTs) use of NDE are presented. A simple procedure for using NDE to address DOT bridge concerns …

Design And Evaluation Of Pediatric Gait Rehabilitation Robots, Cale J. Stolle

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Gait therapy methodologies were studied and analyzed for their potential for pediatric patients. Using data from heel, metatarsal, and toe trajectories, a nominal gait trajectory was determined using Fourier transforms for each foot point. These average trajectories were used as a basis of evaluating each gait therapy mechanism. An existing gait therapy device (called ICARE) previously designed by researchers, including engineers at the University of Nebraska-Lincoln, was redesigned to accommodate pediatric patients. Unlike many existing designs, the pediatric ICARE did not over- or under-constrain the patient’s leg, allowing for repeated, comfortable, easily-adjusted gait motions. This design was assessed under clinical …

Condition Factor Calibration For Load And Resistance Factor Rating Of Steel Girder Bridges, Pranav M. Shakya

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The Load and Resistance Factor Rating (LRFR) is a reliability-based rating procedure complementary to the Load and Resistance Factor Design (LRFD). The intent of LRFR is to provide consistent reliability for all bridges regardless of in-situ condition. The primary difference between design and rating is the uncertain severity and location of deterioration, including the potential future loss of strength for an element already evidencing deterioration. Ostensibly, these uncertainties are accounted for by applying an additional strength reduction factor: the condition factor, ϕ_c. Currently, condition factors are nominally correlated to the condition of the member, which can be Good, …

Characterization Of Molecular Communication Based On Cell Metabolism Through Mutual Information And Flux Balance Analysis, Zahmeeth Sayed Sakkaff

School of Computing: Dissertations, Theses, and Student Research

Synthetic biology is providing novel tools to engineer cells and access the basis of their molecular information processing, including their communication channels based on chemical reactions and molecule exchange. Molecular communication is a discipline in communication engineering that studies these types of communications and ways to exploit them for novel purposes, such as the development of ubiquitous and heterogeneous communication networks to interconnect biological cells with nano and biotechnology-enabled devices, i.e., the Internet of Bio-Nano Things. One major problem in realizing these goals stands in the development of reliable techniques to control the engineered cells and their behavior from the …

Autonomous Uavs For Near Earth Environmental Sensing, David J. Anthony

School of Computing: Dissertations, Theses, and Student Research

Unmanned aerial vehicles (UAVs) are playing an increasing role in large scale environmental monitoring. Small UAVs are increasingly used to monitor agricultural fields, infrastructure projects, and disaster areas. The combination of their sensors, ease of use, and portability make them an ideal tool for collecting information on demand about geographic regions. These small UAVs do have several significant limitations. The UAVs have very limited autonomy and fly pre-determined flight paths far above the underlying terrain, limiting the spatial resolution of the collected data. Current battery technology severely limits their flight times, which in turn limits the temporal resolution of the …

Optimization Of Irrigation Decision In Cornsoywater, Dharmic Payyala

School of Computing: Dissertations, Theses, and Student Research

A crop simulation model is used to estimate crop production as a function of weather conditions, soil parameters, and plant related inputs. These crop simulation models are extensively used by farmers, corporations and policy makers for agronomical planning and decision making. CornSoyWater is one such application which provides irrigation recommendation for soy and corn farmers using hybrid maize and soy sim models. As this is a simulation technology, the accuracy of results depends on the quality of data provided to it. One such important input parameter is weather data. CornSoyWater simulates field and crop conditions by retrieving the updated weather …

Semeo: A Semantic Equivalence Analysis Framework For Obfuscated Android Applications, Zhen Hu

School of Computing: Dissertations, Theses, and Student Research

Software repackaging is a common approach for creating malware. In this approach, malware authors inject malicious payloads into legitimate applications; then, to ren- der security analysis more difficult, they obfuscate most or all of the code. This forces analysts to spend a large amount of effort filtering out benign obfuscated methods in order to locate potentially malicious methods for further analysis. If an effective mechanism for filtering out benign obfuscated methods were available, the number of methods that must be analyzed could be reduced, allowing analysts to be more productive. In this thesis, we introduce SEMEO, a highly effective and …

Testing The Independence Hypothesis Of Accepted Mutations For Pairs Of Adjacent Amino Acids In Protein Sequences, Jyotsna Ramanan

School of Computing: Dissertations, Theses, and Student Research

Evolutionary studies usually assume that the genetic mutations are independent of each other. However, that does not imply that the observed mutations are independent of each other because it is possible that when a nucleotide is mutated, then it may be biologically beneficial if an adjacent nucleotide mutates too.

With a number of decoded genes currently available in various genome libraries and online databases, it is now possible to have a large-scale computer-based study to test whether the independence assumption holds for pairs of adjacent amino acids. Hence the independence question also arises for pairs of adjacent amino acids within …

Finding Dna Motifs: A Probabilistic Suffix Tree Approach, Abhishek Majumdar

School of Computing: Dissertations, Theses, and Student Research

We address the problem of de novo motif identification. That is, given a set of DNA sequences we try to identify motifs in the dataset without having any prior knowledge about existence of any motifs in the dataset. We propose a method based on Probabilistic Suffix Trees (PSTs) to identify fixed-length motifs from a given set of DNA sequences. Our experiments reveal that our approach successfully discovers true motifs. We compared our method with the popular MEME algorithm, and observed that it detects a larger number of correct and statistically significant motifs than MEME. Our method is highly efficient as …

The Effect Of Frequency Resolution On Intelligibility Sentence And Its Relevance To Cochlear Implant Design, Seth H. Roy

School of Computing: Dissertations, Theses, and Student Research

The purpose of this study is to understand how electrical stimulation (as opposed to acoustical stimulation) of the auditory nerve is used in cochlear implants. Speech is a complex signal that changes rapidly in time and frequency domains. Since phonemes (the smallest unit of speech that distinguishes words) depend on nuanced differences in frequency patterns, it would be expected that a signal with drastically reduced frequency information would be of limited value for conveying speech. Such a frequency-poor signal is the object to be investigated in the present work. It is also the basis of the way speech is represented …

Microstructure And Properties Of Spark Plasma Sintered Moalb Ceramics, Ting Lou

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Molybdenum aluminum boride (MoAlB) is a ternary transition metal boride which has promising aeronautic and nuclear applications. It inheres excellent properties of the binary transitional metal borides (e.g., MoB, ZrB₂) such as high melting temperature, high hardness, and thermal conductivity. Besides, MoAlB is superior to MoB because: (1) the Al element provides an oxidation resistance at high temperatures; (2) its nanolaminated structure consisting of M-B layers with alternating Al layers results in a unique damage tolerance property. In this research, polycrystalline MoAlB have been successfully synthesized and simultaneously sintered using spark plasma sintering (SPS) from molybdenum boride (MoB) …

Model Building And Security Analysis Of Puf-Based Authentication, Wenjie Che

Electrical and Computer Engineering ETDs

In the context of hardware systems, authentication refers to the process of confirming the identity and authenticity of chip, board and system components such as RFID tags, smart cards and remote sensors. The ability of physical unclonable functions (PUF) to provide bitstrings unique to each component can be leveraged as an authentication mechanism to detect tamper, impersonation and substitution of such components. However, authentication requires a strong PUF, i.e., one capable of producing a large, unique set of bits per device, and, unlike secret key generation for encryption, has additional challenges that relate to machine learning attacks, protocol attacks and …

Open Scholarly Publishing Plugin, Barry Bailey

Sabbatical Projects

Presentation reflecting author's sabbatical project, which reviewed the need for and developed a plugin to allow institutions to convert WordPress into an institutional repository.