Engineering Commons^™

Radiation Tailored Polymers For Detectors, Adhesive-Coatings And Other Industrial Uses, Anna M. Earley, Alex Bakken, Rusi P. Taleyarkhan

The Summer Undergraduate Research Fellowship (SURF) Symposium

The ever growing importance of humans to depend on renewable resources has shifted the focus of consumers, producers, and even politicians to more sustainable answers. Furthermore, pressure on the oil and natural gas industry has elevated the status of biopolymers in this regard. Polylactic acid (PLA) is unique polymer that offers unique abilities for tailored property derivation; thereby, enabling one to replace many engineered polymers and provide a sustainable solution as a nontoxic renewable resource. As a bioplastic, the tailoring of PLA under various conditions is important to the application and integration into current industry uses. After irradiating high molecular …

Laser-Assisted Microchanneling On Pmma Substrate Utilizing Two-Pass Fabrication Method, Sijie Zhang, Yung C. Shin

The Summer Undergraduate Research Fellowship (SURF) Symposium

Microchannel is widely used in microfluidic devices for mixing, chemical reaction, detection, particle separation and etc. CO₂ laser-based microchanneling of PMMA as a low cost, rapid, noncontact fabrication method has attracted the attention of industry. However, the typical V-shape grooves fabricated by CO₂ laser microchanneling have limitations since the V-shape grooves will affect the flow behavior and heat transfer of the fluid, which are important to the performance of microfluidic devices. A two-pass fabrication method is proposed and investigated in this paper to improve the quality of the PMMA microchannel fabricated by CO₂ laser. It was found …

Plant Phenotyping On Mobile Devices, Ziling Chen, Jian Jin, Zhihang Song, Jialei Wang

The Summer Undergraduate Research Fellowship (SURF) Symposium

Plants phenotyping is a fast and non-destructive method to obtain the physiological features of plants, compared with the expensive and time costing chemical analysis with plant sampling. Through plant phenotyping, scientists and farmers can tell plant health status more accurately compared to visual inspection, thus avoid the waste in time and resources and even to predict the productivity. However, the size and price of current plant phenotyping equipment restrict them from being widely applied at a farmer’s household level. Everyday field operation is barely achieved because of the availability of easy-to-carry and cost-effective equipment such as hyper-spectrum cameras, infrared cameras …

Hydrophobic Zeolites For Applications In Adsorption And Catalysis, Zige Huang, Michael Cordon, Rajamani Gounder

The Summer Undergraduate Research Fellowship (SURF) Symposium

Lewis acidic zeolites such as Sn-Beta are commonly studied for use as selective catalysts for glucose isomerization to fructose in liquid water. Glucose to fructose isomerization is a critical reaction for lignocellulosic biomass upgrading, which converts abundant and renewable feedstocks into commercially desirable fuels and chemicals.

Industrial applications require catalysts that maintain optimal reactivity over long time scales, yet at typical reaction temperatures, Lewis acidic Beta zeolites are known to deactivate in liquid water through poorly understood mechanisms. Recent work in our group has shown that interactions between water and Sn-Beta zeolites can cause leaching of active Sn sites from …

Study Of Oxidative-Crosslink Reaction In Polyphenyl Sulfide (Pps) / Carbon Fiber And Its Influence In Additive Manufacturing, Dong Hee Kim, Eduardo Barocio, Bastian Brenken, Anthony Favaloro, Byron Pipes

The Summer Undergraduate Research Fellowship (SURF) Symposium

Ever since its development in 1980s, Fused Filament Fabrication (FFF) has been an attractive additive manufacturing technology due to its flexibility to create intricate shapes at lower costs and faster manufacturing process than subtractive techniques. These advantages make FFF suitable for printing molds for use in traditional composites manufacturing processes. Combining FFF with high-temperature thermoplastic composites enables producing molds that not only sustain autoclave conditions but also have low coefficient of thermal expansion (CTE). A semi-crystalline polymer, Poly-phenylene Sulfide (PPS), with 50% by weight of carbon fiber is used as feedstock material for FFF. Nonetheless, PPS is sensitive to undergo …

Wearable Piezotronic Devices For Heart Rate Monitoring, Adam J. Miller, Wenzhuo Wu Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Self-powered multifunctional wearable devices that are capable of human-device interfacing are highly desired. Piezotronic devices utilize piezoelectricity and semiconductor properties to enable devices to have seamless interaction between human and device. One important use for piezotronic devices is for pressure sensing. Pressure sensing devices have been employed in smart skins, biomonitoring, gesture recognition, and many more applications. This study aims to create a flexible piezotronic device, specifically for use in pressure sensing to monitor heart rate. ZnO nanowires are grown on a flexible polymer substrate so that they can be made into wearable devices. A p-n heterojunction is formed by …

Pah Analysis Of Sediments From Pleasant Run Creek Adjacent To A Former Manufactured Gas Plant, Celeste A. Bronson, Xuda Lin, Amisha D. Shah, Nadya Zyaykina, Chad Jafvert

The Summer Undergraduate Research Fellowship (SURF) Symposium

Polycyclic aromatic hydrocarbons (PAHs) are known to be toxic and some are even carcinogenic. A prime source of PAHs is coal tar. Coal tar can be found in soils and sediments near former manufactured gas plants (MGPs) or coking facilities. This study involves characterizing the chemical composition and concentrations of PAHs within stream sediments at a former MGP site by Pleasant Run Creek in Indianapolis, Indiana. To characterize the stream sediments, sediment cores were removed from various locations along the stream and sampled with depth. Sample collection was conducted in partnership with the environmental engineering firm, August Mack Environmental. Samples …

Temperature Dependent Surface Modification Of Tungsten Exposed To High-Flux Low-Energy Helium Ion Irradiation, Antony Q. Damico, Jitendra K. Tripathi, Theodore J. Novakowski, Gennady Miloshevsky, Ahmed Hassanein

The Summer Undergraduate Research Fellowship (SURF) Symposium

Nuclear fusion is a great potential energy source that can provide a relatively safe and clean limitless supply of energy using hydrogen isotopes as fuel material. ITER (international thermonuclear experimental reactor) is the world first fusion reactor currently being built in France. Tungsten (W) is a prime candidate material as plasma facing component (PFC) due to its excellent mechanical properties, high melting point, and low erosion rate. However, W undergoes a severe surface morphology change when exposed to helium ion (He⁺) bombardment under fusion conditions. It forms nanoscopic fiber-form structures, i.e., fuzz on the surface. Fuzz is brittle …

Development Of A Diode-Laser Absorption-Spectroscopy Sensor For Real-Time Control Of Combustion Systems, Rahul P. Balla, Christopher S. Goldenstein

The Summer Undergraduate Research Fellowship (SURF) Symposium

Tunable diode-laser absorption spectroscopy (TDLAS) sensors are widely used for measuring gas properties. These sensors offer several advantages including: small footprint, affordability, applicability to harsh environments, rapid time response, and calibration-free operation. As a result, diode-laser sensors can be integrated into control-systems and have previously been used to control gas-turbine combustors. In this study, high-frequency sine waves were generated continuously by a LabVIEW program to simultaneously scan and modulate the wavelength and intensity of a diode laser. The modulated laser light was transmitted 20 cm through the air and measured on a photodetector. Custom-built lock-in software was used to acquire …

Development Of A New Nanohub Simulation Tool: Coarse Graining Of Crystalline Nano-Cellulose., Kuo Tian, Mehdi Shishehbor, Pablo Zavattieri

The Summer Undergraduate Research Fellowship (SURF) Symposium

Crystalline Nano-cellulose (CNC) is a general molecular structure obtained from acid hydrolysis of native fiber. They are often very short (100 to 1000 manometers) and the mechanical properties of CNC varies depend on length scale. Due to defect formation of the structure, the mechanical properties of the material composed of such CNC may vary drastically. This study was to provide a numerical tool to integrate a few valid modules and to better understand the mechanical properties of CNC and the overall performance of the bio-inspired material composed of CNC. Our focus is mainly on two type of composite structure [1] …

Bioconjugation Of N-Terminal Functionalized Ca2+/Calmodulin-Dependent Protein Kinase Ii (Camkii) On Magnetic Beads, Benjamin Moy, Aya Saleh, Tamara L. Kinzer-Ursem

The Summer Undergraduate Research Fellowship (SURF) Symposium

Protein purification is a fundamental step that commonly precedes structural and functional characterization of proteins. Most of the current protein purification methods are laborious and time consuming due to the multistep nature of the process. Searching for alternative methods that are capable of shortening the purification time and simultaneously enhancing the purity of the purified proteins is therefore needed. The method described in this paper entails surface immobilization of the protein of interest on alkyne-functionalized magnetic beads following selective labeling of the protein’s N-terminus with an azide tag. The utility of this method was tested using Ca2+/calmodulin-dependent protein kinase II …

Dynamic Modeling Of Contact-Mode Triboelectric Generators By Lagrange’S Equations, Sean M. Gauntt, James Gibert

The Summer Undergraduate Research Fellowship (SURF) Symposium

Electret based energy scavenging devices utilize electrostatic induction to convert mechanical energy into electrical energy. Uses for these devices include harvesting ambient energy in the environment and acting as sensors for a range of applications. These types of devices have been used in MEMS applications for over a decade. However, recently there is an interest in Triboelectric generators/harvesters, i.e., electret based harvesters that relies on triboelectrification as well as electrostatic induction. The literature is filled with a variety of designs for the latter devices, constructed from materials ranging from paper and thin films; rendering the generators lightweight, flexible and inexpensive. …

Lipid Detection In Pig Arteries Using Intravascular Photoacoustic Imaging, Jieying Mai, Yingchun Cao, Ayeeshik Kole, Michael Sturek, Ji-Xin Cheng

The Summer Undergraduate Research Fellowship (SURF) Symposium

Heart disease is the leading cause of death in the United States and worldwide. Each year over 370,000 people died from coronary artery disease in America. As the primary form of coronary artery disease, atherosclerosis behaves as lipid-rich plaque development inside an artery wall. Vulnerable plaques are those prone to rupture, which may result in thrombus or even death. Typical hallmarks of a vulnerable plaque include thin fibrous cap, a large lipid-rich necrotic core and inflammatory infiltrate. The identification and accurate detection of these lipid depositions in the arterial wall is crucial in the diagnosis of atherosclerosis. However, none of …

Optimization Of A High-Speed X-Ray Imaging System For Studying Sprays, Lane E. Schultz, Mikhail N. Slipchenko, Terrence R. Meyer, Wilbert C. Slowman

The Summer Undergraduate Research Fellowship (SURF) Symposium

Spray-based liquid atomization and liquid mixing is critical for development of efficient combustors and drug delivery systems as well as multiple coating-related applications. While optical methods allow characterization of low density regions of sprays, the scattering of optical photons hinders the characterization of a dense core. Unlike optical photons, higher-energy X-ray photons have the capability to penetrate and image the core structure of sprays. Here we characterized temporal and spatial resolution of an X-Ray imaging system based on a commercially available tube source with an anode size of 0.6 mm. For high-speed imaging, a phosphor screen in combination with a …

Quantum Dot Lab : Incorporation Of Alloys In The Capping Layer Of Multi-Layer Quantum Dot, Unmesha U. Kale, Prasad Sarangapani, Jim Fonseca, Gerhard Klimeck

The Summer Undergraduate Research Fellowship (SURF) Symposium

Quantum dots have enhanced the performance of several optoelectronic devices. Designing and obtaining optimal quantum dot structures requires intensive simulation. Quantum Dot Lab on nanoHUB provides such a simulation platform. The simulation is fully parallelized and depending on the structure, the tool decides the computational resource which is to be used for the simulation. To obtain accurate predictions of quantum dot structures it is essential to provide a variety of simulation parameters to the user. In this research, a user interface was created where the user can simulate alloys by Random distribution and by Virtual Crystal Approximation(VCA) type distribution in …

Multi-Objective Optimization Under Uncertainty Using The Hyper-Volume Expected Improvement, Martin Figura, Piyush Pandita, Rohit K. Tripathy, Ilias Bilionis

The Summer Undergraduate Research Fellowship (SURF) Symposium

The design of real engineering systems requires the optimization of multiple quantities of interest. In the electric motor design, one wants to maximize the average torque and minimize the torque variation. A study has shown that these attributes vary for different geometries of the rotor teeth. However, simulations of a large number of designs cannot be performed due to their high cost. In many problems, design optimization of multi-objective functions is a very challenging task due to the difficulty to evaluate the expectation of the objectives. Current multi-objective optimization (MOO) techniques, e.g., evolutionary algorithms cannot solve such problems because they …

Tfit Modeling Of Wave Propagation For Flow Excursion, Brachston Grubbs, Krishna Chetty, Martin Bertodano

The Summer Undergraduate Research Fellowship (SURF) Symposium

In the nuclear power industry, the Two-Fluid Model (TFM) is mainly used in the simulation of Loss of Coolant Accident (LOCA). The Two-Fluid Model is a wave mechanics formulation that may also be used to analytically perform stability analysis, which requires numerous assumptions and simplifications. This project aimed to advance the TFIT-TFM simulations in the modeling of the flow excursion instability. By using the TFIT computational code, simulation results can be obtained without the need for assumptions and simplifications. In this project, a simulation was performed to verify the nonlinear wave propagation capability of TFIT. During the verification process, the …

Effect Of Aggregation And Particle Size On The Thermal Conductivity Of Nickel-Epoxy Nanocomposites, Jacob M. Faulkner, Xiangyu Li, Xiulin Ruan Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Microprocessor advancements have been stunted in recent years by inadequate means of heat dissipation as power continues to grow and size continues to shrink. One way to increase thermal conductivity while maintaining electrical insulation is to add metal nanoparticles to a polymer matrix. This cheap material has become a popular thermal interface for this reason. However, optimization of the interface is dependent upon a number of factors including particle size, shape, orientation, and aggregation. Various theoretical models and numerical approximations have been developed to find the effective thermal conductivity of such nanocomposites, but none has been able to fully incorporate …

The Effect Of Honeycomb Cavity: Acoustic Performance Of A Double-Leaf Micro Perforated Panel, Yuxian Huang, Kai Ming Li

The Summer Undergraduate Research Fellowship (SURF) Symposium

A micro perforated panel (MPP) is a device consisting of a thin plate and submillimeter perforations for reducing low frequency noise. MPPs have many advantages compared to traditional sound absorption materials, such as durability and designability, and they can be used in a variety of places such as room interior designs, passenger and crew compartments of aircrafts and combustion engines. The models in this study were designed and fabricated with the latest 3-D printing technology. The transmission loss and sound absorption coefficient of the 3-D printed double-leaf MPPs with honeycomb cavities were studied. According to the established theory, MPPs work …

Exploring The Effects Of Aromatic Molecules In Chemical Enhanced Oil Recovery, Jacob M. Crain, Cliff Johnston, Rituraj Borgohain

The Summer Undergraduate Research Fellowship (SURF) Symposium

Chemical enhanced oil recovery (cEOR) methods are being used as a viable contributor to the world’s growing energy demands. Due to the complex chemical composition of crude oil, attempting to optimize the surfactant concentration and salinity of formulations is done empirically. This process can be very time intensive due to the wide variety of surfactant structures available for cEOR. Surfactant selection is typically done by matching the average chain length of the oil with that of the surfactant. In this study, we are trying to understand how aromatic structures present in Illinois Basin crude oil interact with surfactants. This will …

Thermoelectric Properties From Ab Initio Calculations, Gustavo Javier-Rico, David M. Guzman, Alejandro H. Strachan

The Summer Undergraduate Research Fellowship (SURF) Symposium

As nanoscales become accessible to experimentalists, atomistic simulations of materials are becoming increasingly important for the prediction and design of materials properties. Recently, the search for energy efficient materials has driven the development of new theoretical methods, such as the Landauer-Datta-Lundstrom (LDL) generalized transport model, to explore thermoelectric properties of materials based on their electronic structure and lattice dynamics. The Landauer Transport Properties (LanTraP) tool, currently available in nanoHUB, allows the computation of thermoelectric transport coefficients from a full-band electron dispersion; however, generating such electron band structures from ab initio methods is a convoluted process. The aim of this project …

Cellular Model Of Hydrogen Peroxide Release: In Preparation For On-Chip Sensor Measurements, Sarah M. Libring, Hannah R. Kriscovich, James K. Nolan, Siddarth V. Sridharan, Jose F. Rivera, David B. Janes, Jenna L. Rickus

The Summer Undergraduate Research Fellowship (SURF) Symposium

Hydrogen peroxide is traditionally associated with cellular damage; however, recent studies show that low levels of H₂O₂ are released by cells as part of normal intercellular communication. The mechanisms of hydrogen peroxide transport, uptake and release, and biological effects are not yet well known but have important implications for cancer, stem cells, and aging. Standard H₂O₂ assays cannot make spatially or temporally resolved quantitative measurements at a cellular scale. Previously we developed a microelectrode array (MEA) and calibration methods for quantifying H₂O₂ gradients in space and time. The sensor was validated …

Laser Assisted Manufacturing: A Comparison Of Mechanical Properties Between Lam And Conventional Manufacturing Techniques, William Blakeslee, Neil S. Bailey, Kyung-Min Hong, Shunyu Liu, Yung C. Shin

The Summer Undergraduate Research Fellowship (SURF) Symposium

Laser assisted manufacturing methods, such as direct metal deposition (DMD) and laser beam welding (LBW), are promising methods because of their higher precision and greater productivity when compared to traditional manufacturing methods. Because these methods are relatively new, the mechanical properties of samples produced by laser assisted manufacturing are not well understood. In this study the mechanical properties of samples produced by laser assisted manufacturing methods are analyzed and compared with data obtained from traditional manufacturing methods. The DMD process used Fe-TiC and Ti-TiC metal matrix composites, while LBW used AISI 304 stainless steel. The results vary widely with the …

Exploring Regional And Telecoupled Land Use Change Impacts From Environmental Shocks, Kevin Hill, Liz Wachs, Brady Hardiman, David Yu, Shweta Singh

The Summer Undergraduate Research Fellowship (SURF) Symposium

Natural disasters or environmental shocks have the potential to disrupt local agricultural systems as well as distant agricultural systems through cascading effects. In this work we selected two distinct environmental shocks and traced their cascading effects on land use change. Quantifying cascading effects is a salient issue because climate change forecasts indicate an increase in frequency and intensity of global environmental shocks. This study incorporated the concept of telecoupled systems involving interrelating ecological, economic and political/social components. A telecoupled framework involving cascading effects was implemented using three approaches. The first approach involved using bilateral agricultural trade matrix data to analyze …

A Fast Model For The Simulation Of External Gear Pumps, Zechao Lu, Xinran Zhao, Andrea Vacca

The Summer Undergraduate Research Fellowship (SURF) Symposium

External gear pump is an important category of positive displacement fluid machines used to perform the mechanical–hydraulic energy conversions in many fluid power applications. An efficient numerical simulation program is needed to simulate the system in order to provide a direction for design purpose. The model consists of a lumped parameter fluid dynamic model and a model that simulates the radial micro-motions of the gear’s axes of rotation. The system consists of a set of ordinary differential equations related to the conservation on mass of the internal control volumes of the pump, which are given by the tooth space volumes …

Use Of Demographic Faultlines To Predict Teams’ Conflict, Satisfaction And Performance, Marina Pazeti, Isabel Jimenez-Useche

The Summer Undergraduate Research Fellowship (SURF) Symposium

During the past decade, industries and businesses have experienced the formation of a global market place. Current tasks require professionals from different fields and with different backgrounds to work together as a team. The goal of this study is to investigate how diversity in teams may impact perception of conflict, satisfaction and performance, in first-year engineering students. Team diversity is associated with faultlines: the potential to form subgroups based on certain characteristics. The strength and width of faultlines in a team is likely to impact the team’s outcomes. In this research, we used demographic characteristics such as gender, ethnicity, language …

Continuous Ligand-Assisted Elution Chromatography Applied To Separation Of Rare Earth Elements, Jeremy A. Weinstock, David M. Harvey, N.-H. Linda Wang

The Summer Undergraduate Research Fellowship (SURF) Symposium

Rare earth elements (REEs) are metals used to make many valuable products such as magnets and electronics. Following their extraction from larger materials, REEs are to be separated into their individual components as high purity is required for product manufacture. Purification is very difficult because most (15/17) of the REEs are lanthanides (Ln’s) and Ln ions have the same valence and similar atomic radii. The current industrial process for purifying REEs involves using toxic solvents to perform a series of liquid-liquid extractions. Ling and Wang (2015) proposed a ligand-assisted batch chromatography process to purify Ln’s. The latter approach is a …

Pathway By Which Vagus Nerve Stimulation Of B Fibers Affects Heart Rate, Kelsey Wasilczuk, Matthew Ward, Pedro Irazoqui

The Summer Undergraduate Research Fellowship (SURF) Symposium

Heart failure (HF) affects over 5 million adults in the United States. Many HF patients have a high resting heart rate, which is correlated with a high mortality rate. In recent years, vagus nerve stimulation (VNS) has become an increasingly researched therapy to reduce the resting heart rate of HF patients. However, current dosage given during VNS is increased incrementally at the doctor’s office until side effects present themselves in a patient. In addition, the means by which the therapy works is not completely understood. To better understand the therapy’s mechanisms, the right cervical vagus nerve of several Long Evans …

Relative Contributions Of Inelastic Phonon Scattering And Elastic Phonon Scattering To Thermal Boundary Conductance Across Solid Interfaces, Mengxi Zhao, Zexi Lu, Xiulin Ruan

The Summer Undergraduate Research Fellowship (SURF) Symposium

The knowledge of inelastic phonon scattering is crucial for the understanding of thermal boundary conductance across solid interfaces. Several traditional theoretical models such as the acoustic mismatch model (AMM) and the diffuse mismatch model (DMM) assume that the elastic phonon scattering drives the thermal transport across the interface. But there are experiments indicating that the inelastic phonon scattering plays an important part in the interfacial thermal energy conduction as well. We use nonequilibrium molecular dynamics (NEMD) to predict the inelastic phonon conductance across Cu/Si interface. Temperature distribution across Cu/Si interface has been obtained from the simulation results, and a temperature …

Photonicstd-2d: Modeling Light Scattering In Periodic Multilayer Photonic Structures, Alexey Bondarev, Shaimaa Azzam, Zhaxylyk Kudyshev, Alexander V. Kildishev

The Summer Undergraduate Research Fellowship (SURF) Symposium

Efficient modeling of electromagnetic processes in optical and plasmonic metamaterials is important for enabling new and exciting ways to manipulate light for advanced applications. In this work, we put together a tool for numerical simulation of propagation of normally incident light through a nanostructured multilayer composite material. The user builds a unit cell of a given material layer-by-layer starting from a substrate up to a superstrate, splitting each layer further into segments. The segments are defined by width and material -- dielectric, metal or active medium. Simulations are performed with the finite difference time domain (FDTD) method. A database of …