Engineering Commons^™

Method Of Increasing Mass Transfer Rate Of Acid Gas Scrubbing Solvents, Joseph E. Remias, Cameron A. Lippert, Kunlei Liu

Center for Applied Energy Research Faculty Patents

A method of increasing the overall mass transfer rate of acid gas scrubbing solids is disclosed. Various catalyst compounds for that purpose are also disclosed.

Mechanical Engineering News, Georgia Southern University

Mechanical Engineering: News & Publications (2013-2023)

• Dr. Xuchun Ren Awarded NSF Research Grant

• Mechanical Engineering Faculty Visit Robins AFB

Development Of A "Multi-Cut" Payload For Use In Stratospheric Ballooning Missions, James Flaten, Joey Habeck, Noah Biniek, Steven Smeaton, Austin Langford, Jordan Diers, Isaac Krieger

2017 Academic High Altitude Conference

The ability to cut strings (AKA lines) during stratospheric ballooning missions has a wide variety of uses including, but not limited to, (a) flight termination (i.e. cutting payloads away from the main balloon), (b) cutting away excess lift balloon(s) to slow ascent rate (and possibly achieve float), (c) cutting away ballast weights to slow descent rate or increase ascent rate, (d) cutting away burst balloon(s) on descent to avoid parachute entanglement, and (e) cutting away payloads which are intended to return to the ground independently, for experimental purposes. We report on the development of a “multi-cut” payload box that uses …

High-Grade, Compact Spectrometers For Earth Observation From Smallsats, Len Van Der Wal, Bryan De Goeij, Rik Jansen, Han Oosterling, Bart Snijders

Small Satellite Conference

The market for nano- and microsatellites is developing rapidly. There is a strong focus on 2D imaging of the Earth's surface, with limited possibilities to obtain spectral information. More demanding applications, such as monitoring trace gases and aerosols, or water quality still require advanced spectral imaging instruments, which are large, heavy and expensive.

In recent years TNO has investigated and developed different innovative designs to realize advanced spectrometers for space applications in a more compact and cost-effective manner. This offers multiple advantages: A compact instrument can be flown on a much smaller platform (nano- or microsatellite); a low-cost instrument opens …

Abstracts From The 2016 Ahac Conference, Erick Agrimson

2017 Academic High Altitude Conference

This is a listing of Abstracts from AHAC 2016

Acer Research Conference Proceedings (2016), Australian Council For Educational Research (Acer)

2009 - 2019 ACER Research Conferences

The focus of ACER’s Research Conference 2016 will be on what we are learning from research about ways of improving levels of STEM learning. Australia faces significant challenges in promoting improved science, technology, engineering and mathematics (STEM) learning in our schools. Research Conference 2016 will showcase research into what it will take to address these challenges, which include: the decline in Australian students’ mathematical and scientific ‘literacy’; the decline in STEM study in senior school; a shortage of highly qualified STEM subject teachers, and curriculum challenges. You will hear from researchers who work with teachers to engage students in studying …

Low-Cost Compact Diffuse Speckle Contrast Flowmeter Using Small Laser Diode And Bare Charge-Coupled-Device, Chong Huang, Myeongsu Seong, Joshua Paul Morgan, Siavash Mazdeyasna, Jae Gwan Kim, Jeffrey Todd Hastings, Guoqiang Yu

Biomedical Engineering Faculty Publications

We report a low-cost compact diffuse speckle contrast flowmeter (DSCF) consisting of a small laser diode and a bare charge-coupled-device (CCD) chip, which can be used for contact measurements of blood flow variations in relatively deep tissues (up to ∼8  mm). Measurements of large flow variations by the contact DSCF probe are compared to a noncontact CCD-based diffuse speckle contrast spectroscopy and a standard contact diffuse correlation spectroscopy in tissue phantoms and a human forearm. Bland–Altman analysis shows no significant bias with good limits of agreement among these measurements: 96.5% ± 2.2% (94.4% to 100.0%) in phantom experiments and 92.8% …

Miniaturized Ion And Neutral Mass Spectrometer For Cubesat Atmospheric Measurements, M. Rodriguez, N. Paschalidis, S. Jones, E. Sittler, D, Chornay, P. Uribe

Small Satellite Conference

A presentation about the Mini Ion Neutral Mass Spectrometer (INMS).

Wavelength Independency Of Spatially Multiplexed Communication Channels In Standard Multimode Optical Fibers, Syed H. Murshid, Gregory L. Lovell, Arnob Hridoy, Gurinder Parhar, Abhijit Chakravarty, Saud F. Alanzi, Bilas Chowdhury

Electrical Engineering and Computer Science Faculty Publications

Spatial domain multiplexing (SDM), also known as space division multiplexing, adds a new degree of photon freedom to existing optical fiber multiplexing techniques by allocating separate radial locations to different channels of the same wavelength as a function of the input launch angle. These independent MIMO channels remain confined to their designated locations while traversing the length of the carrier fiber owing to helical propagation of light inside the fiber core. As a result, multiple channels of the same wavelength can be supported inside a single optical fiber core, thereby allowing spatial reuse of optical frequencies and multiplication of fiber …

Application Of Voltammetry For Electroanalytical Measurement Of Concentrations In Lacl3-Mgcl2 Mixtures In Eutectic Licl-Kcl, Zhonghang Wang, Devin Rappleye, C S. Yang, Michael Simpson

Faculty Publications

For electroanalytical measurement of molten chloride salts, various voltammetry methods have been used on mixtures of MgCl₂ and LaCl₃ in eutectic LiCl-KCl. These salt mixtures are of primary interest to spent nuclear fuel electrorefining systems. MgCl₂ is used as a surrogate for PuCl₃, while LaCl₃ represents rare earth fission product salts. Cyclic voltammetry scans with these salt mixtures exhibited extra peaks, presumably due to underpotential deposition of La(III) ions onto Mg. Quantitatively, the current contribution from each peak was best determined using normal pulse voltammetry and fit to the Cottrell equation. This yielded linear …

Silver Photo-Diffusion And Photo-Induced Macroscopic Surface Deformation Of Ge33s67/Ag/Si Substrate, M. Ailavajhala, M. Mitkova

Electrical and Computer Engineering Faculty Publications and Presentations

Ge-chalcogenide films show various photo-induced changes, and silver photo-diffusion is one of them which attracts lots of interest. In this paper, we report how silver and Ge-chalcogenide layers in Ge₃₃S₆₇/Ag/Si substrate stacks change under light exposure in the depth by measuring time-resolved neutron reflectivity. It was found from the measurement that Ag ions diffuse all over the matrix Ge₃₃S₆₇layer once Ag dissolves into the layer. We also found that the surface was macroscopically deformed by the extended light exposure. Its structural origin was investigated by a scanning electron microscopy.

Citizen Satellite: A Way To Have Low Cost Space Missions For The Unordinary Innovator, Robert J. Twiggs, Amin Djamshidpour, Ted Tagami, Tony So

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Robert Twiggs, Amin Djamshidpour , Ted Tagami, and Tony So titled "Citizen Satellite: A Way to have Low Cost Space Missions for the Unordinary Innovator" from August 7, 2016.

Development And Characterization Of Oxygen Sensitive Microbial Biosensors, Jonathan Lee

Rose-Hulman Undergraduate Research Publications

Microbial biosensors are useful in detecting suboptimal conditions in a bioreactor. This detection can help in development of improved mixing methods to reduce the occurrence of these conditions. In this research, the activities of 3 promoters known to have activity under anaerobic conditions, the gadB promoter, an FNR protein activated promoter, and the pfl promoter, were tested for activity under anaerobic conditions by connecting them to a green fluorescent protein (GFP) gene. Using two types of media, Luria-Bertani (LB) and Wilms-Reuss media, the activity of these promoters under aerobic and anaerobic conditions were tested. Results indicate that while the FNR …

Determining The Print Accuracy Of Four Three-Dimensional Printers, Kshiteej Dalal

Master of Technology Management Plan II Graduate Projects

Rapid prototyping [RP] or 3D printing [3DP] have existed for some time now. One of the major deficiencies of 3DP is the accuracy of the printed three dimensional parts. Even beyond that is the lack of studies that have been designed to measure the 3DP components. Measuring, verifying and determining the accuracy of 3DP parts is the focus of this study. As the accuracy is measured and approaches those of CNC machined parts, it will drive the development of additional additive manufacturing [AM] machinery. In this project a component is created in a solid modeling package. A solid model of …

A Highly Efficient Dual Rotating Disks Photocatalytic Fuel Cell With Wedged Surface Tio2 Nanopore Anode And Hemoglobin Film Cathode, Chen Yang, Yi He, Kan Li, Diwen Ying, Ye Yao, Tiantian Tang, Yalin Wang, Jinping Jia

Publications and Research

In this study, a dual rotating-disk photocatalytic fuel cell using TiO₂ on Ti plate with a wedged surface as the anode and hemoglobin (Hb) on graphite as the cathode was investigated and found to show excellent performance of simultaneous organic pollutant degradation and electricity generation. This study is based on a well-developed photocatalytic fuel cell equipped with dual rotating disks for wastewater treatment that we developed previously, and the innovation of this new device is using a hemoglobin on graphite cathode for in situ hydrogen peroxide (H₂O₂) generation. The result proved with confidence that H …

Civil Engineering And Construction News, Georgia Southern University

Civil Engineering & Construction: News & Publications (2011-2022)

• Georgia Southern Wins Award at ASC Competition

Design Maps For Fracture Resistant Functionally Graded Materials, Muhammad Ridwan Murshed

Theses and Dissertations

The objective of this research is to generate design maps to identify functionally graded microstructures with enhanced fracture toughness. Several Functionally Graded Materials (FGMs) with an edge crack and membrane loading are considered and the resulting J-integral values are computed numerically using Finite Element Analysis. In order to capture the resulting stress fields accurately, Barsoum elements are used in the vicinity of the crack tip and the simulations are carried out for several crack lengths (a) and material contrasts (κ). The averages of the J-integral values are used to determine the normalized Stress Intensity Factors which are then benchmarked with …

Generalizing The Quantum Dot Lab Towards Arbitrary Shapes And Compositions, Matthew A. Bliss, Prasad Sarangapani, James Fonseca, Gerhard Klimeck

The Summer Undergraduate Research Fellowship (SURF) Symposium

As applications in nanotechnology reach the scale of countable atoms, computer simulation has become a necessity in the understanding of new devices, such as quantum dots. To understand the various optoelectronic properties of these nanoparticles, the Quantum Dot Lab (QDL) has been created and powered by NEMO5 to simulate on multi-scale, multi-physics bases. QDL is easy to use by offering choices of different QD geometries such as shapes and sizes to the users from a predefined menu. The simplicity of use, however, limits the simulation of general QD shapes and compositions. A method to import generic strained crystalline and amorphous …

Modeling Of A Roll-To-Roll Plasma Cvd System For Graphene, Yudong Chen, Majed A. Alrefae, Anurag Kumar, Timothy S. Fisher

The Summer Undergraduate Research Fellowship (SURF) Symposium

Graphene is a 2D carbon material that has extraordinary physical properties relevant to many industrial applications such as electronics, oxidation barrier and biosensors. Roll-to-roll plasma chemical vapor deposition (CVD) has been developed to manufacture graphene at large scale. In a plasma CVD chamber, graphene is grown on a copper foil as it passes through a high-temperature plasma region. The temperatures of the gas and the copper foil play important roles in the growth of graphene. Consequently, there is a need to understand the temperature and gas velocity distributions in the system. The heat generated in the plasma creates a thermal …

Amine-Thiol Solution Route Method For Fabricating Cdxzn1-Xs Thin Film Solar Cells, Preston D. Fernandez, Xianyi Hu, Carol Handwerker, Rakesh Agrawal

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cadmium zinc sulfide, CdZnS, is a promising material for the buffer layer of thin film solar cells because the alloy is considerably more cost effective and more optimizable than pure cadmium sulfide, CdS, in terms of band gap. The current fabrication methods of the buffer layer often require expensive equipment or produce undesirable impurities in the alloy. This study investigates a cost effective and scalable solution route method to synthesize the CdZnS buffer layer. Molecular precursors of CdZnS were dissolved in varying molecular ratios of cadmium and zinc in a mixture of hexylamine and propanethiol. The resulting alloys produced were …

Infant Exposure To Resuspended Particles From Carpeted Flooring: Experimental Chamber Study With A Simplified Mechanical Crawling Infant, Manjie Fu, Brandon E. Boor

The Summer Undergraduate Research Fellowship (SURF) Symposium

Airborne particles of biological origin – bioaerosols – are present everywhere, including the indoor environment where people spend considerable amounts of time, and exposure to such materials via inhalation can have a number of health implications. Bioaerosol dynamics can occur through a variety of mechanisms, among them resuspension of deposited particles due to human activity. Because the breathing zone of infants is at a much lower height than that of adults, there is reason to suspect that infants are exposed to greater concentrations of bioaerosols resuspended from the floor, though knowledge in this specific area is limited. To investigate, a …

Dynamic Modeling And Validation Of Micro-Chp Systems, Apurva Badithela, Neera Jain, Austin Nash

The Summer Undergraduate Research Fellowship (SURF) Symposium

Micro-Combined Heat and Power (micro-CHP) units locally generate electricity to simultaneously provide power and heat for residential buildings. Apart from the potential benefits of reducing carbon emissions and increasing robustness to brownouts and blackouts, micro-CHP systems can be controlled to meet energy demands. Micro-CHP systems consist of a prime mover that generates electricity, such as a fuel cell, an internal combustion engine, or a Stirling engine, and a waste heat recovery system that enables utilization of heat generated as a byproduct of electricity generation. Often, a thermal energy storage system is integrated with micro-CHP systems, thereby decoupling, in time, the …

Fluid Flow Thermometry Using Thermographic Phosphors, Gabriel J. Fenoglio, Humberto J. Detrinidad, Aman Satija, Alex D. Casey, Robert P. Lucht, Terrence R. Meyer

The Summer Undergraduate Research Fellowship (SURF) Symposium

Phosphor thermometry is a non-intrusive thermometry technique that allows for spatially and temporally resolved surface temperature measurements. The thermographic method has been employed in a number of applications that include combustion, sprays, and gas flows. In the current work, we investigate the implementation of thermographic phosphors in liquid flows, which is of interest in a wide range of applications in heat transfer, fluid mechanics, and thermal systems. Zinc oxide doped with Zinc (ZnO:Zn) was the phosphor employed for experimentation due to its high emission intensity and insolubility. In order to explore this application, the phosphor powder was uniformly dispersed in …

Development Of Functional Requirements For A High-Capacity Airspace System, Noel J. Colon, Jeongjoon Boo, Steven J. Landry

The Summer Undergraduate Research Fellowship (SURF) Symposium

NASA along with other researchers visualizes a future where more aircraft will transport passengers or goods around the world. Thus, they envision increasing air capacity from 10 to 100 times more than the current system without any reduction in efficiency or safety. Many models are being proposed that comply with the necessary requirements to form part of the method needed. However, knowing which of the proposed methods have the most desirable characteristics, such as efficiency and safety, are yet to be determined. For this reason, a standardized method to compare and assess them has to be developed, since is not …

A Proposal For A Wirelessly Powered, Implantable Pressure Sensor And Neural Stimulator For The Control Of Urinary Incontinence, Robert N. Tucker, Christopher J. Quinkert, Pedro P. Irazoqui

The Summer Undergraduate Research Fellowship (SURF) Symposium

47 to 53 percent of women over the age of 20 suffer from urinary incontinence, often caused by childbirth-related damage to the pelvic nerve. This uncertainty of when bladder voiding will occur causes social anxiety and can compromise quality of life. This study explores one method to restore the ability to sense the need to urinate and prevent unwanted voiding. We propose a device to measure pressure due to bladder content as the difference between pressure in the bladder and pressure in the abdominal cavity. Integrated circuits, biocompatible packaging, and wireless radiofrequency powering allow for a fully implantable device to …

Pore Scale Transport Of Miscible And Immiscible Fluids In Porous Media, Tolulope O. Odimayomi, Arezoo M. Ardekani

The Summer Undergraduate Research Fellowship (SURF) Symposium

The separation of harmful or valuable substances entrapped in porous media has applications in processes such as enhanced oil recovery, diffusion in tissue, and aquifer remediation. In this study the motion and removal rate of immiscible and miscible solutions have been analyzed to gain understanding of solvent effectiveness as it is diluted due to diffusion or mixing within porous materials. The extraction of oil using water, a surfactant solution of 4% CTAB in water, and a foam produced form the surfactant solution is observed using two dimensional flows between parallel slides containing cylindrical obstacles. The fluid motion is visualized. The …

Cold Atmospheric Pressure Plasmas For Food Applications, Michael V. Lauria, Russell S. Brayfield Ii, Ronald G. Johnson, Allen L. Garner

The Summer Undergraduate Research Fellowship (SURF) Symposium

Successfully distributing shelf food requires treatment to eliminate microorganisms. Current chemical methods, such as chlorine wash, can alter food quality while only being effective for a limited time. Cold atmospheric pressure plasmas (CAPs) can eradicate the microorganisms responsible for food spoilage and foodborne illness. Optimizing CAP treatments requires understanding the reactive species generated and relating them to eradication efficiency. Recent studies have used optical emission spectroscopy (OES) to determine the species generated in a sealed package that would hold food. In this study,we supplement the OES results with optical absorption spectroscopy (OAS) using the same gases (helium, nitrogen, compressed air, …

Development Of Micro-/Nano-Architectures For Intracellular Sensing Platform, Ryan M. Preston, Dae Seung Wie, Chi Hwan Lee

The Summer Undergraduate Research Fellowship (SURF) Symposium

Currently available nanotechnologies are capable of creating various nanostructures in controlled dimensions such as particles (0D), wires (1D), membranes (2D), and cubes (3D) by exploiting “top-down” or “bottom-up” methods. However, there exist limitations to systematically construct hierarchical nanostructures with geometric complexities. This study is focused on developing a novel nanofabrication strategy that can rationally produce a set of hierarchical nanostructures configured with precisely engineered facets, tip shapes, and tectonic motifs. We aim to identify a collection of optimal materials, array layouts, basic components, and nanofabrication techniques for the production of hierarchical nanostructures by exploiting device-grade semiconducting silicon materials. To accomplish …

3d Modeling Of Murine Abdominal Aortic Aneurysms: Quantification Of Segmentation And Volumetric Reconstruction, Paula A. Sarmiento, Amelia R. Adelsperger, Craig J. Goergen Ph.D.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Abdominal Aortic Aneurysms (AAA) cause 5,900 deaths in the United States each year. Surgical intervention is clinically studied by non-invasive techniques such as computed tomography and magnetic resonance imaging. However, three-dimensional (3D) ultrasound imaging has become an inexpensive alternative and useful tool to characterize aneurysms, allowing for reconstruction of the vessel, quantification of hemodynamics through computational fluid dynamics (CFD) simulation, and possible prediction of aortic expansion and rupture. However, current analysis techniques for these images require the use of multiple software platforms for either modeling or simulation, prompting the need for alternatives to improve data processing. This study monitors the …

Atomistic Configuration Interaction Simulation Tool For Semiconductor Based Quantum Computing Devices, Jingbo Wu, Archana Tankasala, Jim Fonseca, Rajib Rahman, Gerhard Klimeck

The Summer Undergraduate Research Fellowship (SURF) Symposium

Solid-state devices are promising candidates for quantum computing applications due to obvious advantages in compatibility with semiconductor fabrication technologies and the extremely long coherent times of electron and nuclear spins in these devices. In such devices, electron interactions are crucial for single and two qubit gate operations. Thus it is essential to evaluate these electron-electron interactions accurately for precise qubit control. It is shown that Atomistic Configuration Interaction can be used to accurately determine electron-electron interactions in realistic semiconductor quantum computing devices. In this work, an online simulation tool on Atomistic Configuration Interaction has been implemented and published on nanoHUB.org, …