Engineering Commons^™

Sci Pop Talks! Presenter Guidelines, Kiyomi D. Deards, Raychelle Burks

University of Nebraska-Lincoln Libraries: Faculty Publications

Presenter guidelines for the nUniversity of Nebraska-Lincoln (UNL) Sci Pop! Talks series.

Orientation Error Analysis And Compenstation Of Orthogonal Array With Two-Dimension Vector Sensors, Peng Han, Chao Ren, Zhongge Zhang, Grant L. Steven

Electrical and Computer Engineering Faculty Research & Creative Works

In the application of underwater target orientation using two-dimensional differential pressure vector sensors, both the elements of the vector sensors and the compensation algorithm will introduce target orientation errors. In this paper, simulation results of these target orientation errors reveal that channel response inconsistency errors contribute much more influence on the orthogonal array compared with the SNR, the target incident angle, and the unit location displacement. Based on this observation, a compensation algorithm for orientation estimation error is proposed and testing results demonstrate the efficiency of the proposed algorithm.

Aerodynamic Testing And Development Of Sunswift Eve, Simon Ambrose, Graham Doig

Aerospace Engineering

The current understanding of the aerodynamic performance of Sunswift’s solar-electric race car eVe is limited, despite the design and manufacture of the vehicle in 2012-13. This paper describes an investigation into the aerodynamic behaviour of the vehicle and details the successive design and development of drag minimisation strategies. A study of the ex­ternal airflow around the vehicle was undertaken through a computational fluid dynamics analysis, with validation offered through the results of real-world track testing. Particular reference is made to the Sunswift team’s successful long-range electric vehicle land speed record attempt on 23 July 2014. A predicted 10% reduction in …

The 2014 François Naftali Frenkiel Award For Fluid Mechanics, Benjamin D. Mater, Simon M. Schaad, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Random Walk Based Capacitance Extraction For 3d Ics With Cylindrical Inter-Tier-Vias, Wenjian Yu, Chao Zhang, Qing Wang, Yiyu Shi

Electrical and Computer Engineering Faculty Research & Creative Works

Three-dimensional integrated circuits (3D ICs) make use of the vertical dimension for smaller footprint, higher speed, lower power consumption, and better timing performance. In 3D ICs, the inter-tier-via (ITV) is a critical enabling technique because it forms vertical signal and power paths. Accordingly, it is imperative to accurately and efficiently extract the electrostatic capacitances of ITVs using field solvers. Unfortunately, the cylindrical via shape presents major challenges to most of the existing methods. To address this issue, we develop a novel floating random walk (FRW) method by rotating the transition cube to suit the cylindrical surface and devising a special …

Real Time Anomaly Detection In Wide Area Monitoring Of Smart Grids, Jie Wu, Jinjun Xiong, Prasenjit Shil, Yiyu Shi

Electrical and Computer Engineering Faculty Research & Creative Works

The real time anomaly detection in wide area monitoring of smart grids is critical to enhance the reliability of power systems. However, capturing the features of anomalous interruption and then detecting them at real time is difficult for large-scale smart grids, because the measurement data volume and complexity increases drastically with the exponential growth of data from the immense intelligent monitoring devices to be rolled out and the need for fast information retrieval from those mass data. Most of existing anomaly detection methods fail to handle it well. This paper proposes a spatial-Temporal correlation based anomalous behavior model to capture …

Fast And Accurate Emissivity And Absolute Temperature Maps Measurement For Integrated Circuits, Hsueh Ling Yu, Yih Lang Li, Tzu Yi Liao, Tianchen Wang, Yiyu Shi

Electrical and Computer Engineering Faculty Research & Creative Works

The comparison of temperatures (temperature correlation) obtained by measuring instruments and by thermal simulation is commonly necessary. Currently the way in which thermal maps are obtained by infrared thermographer yields inaccurate results since the emissivity values of all elements in an IC are ignored and measurement method assumes a constant emissivity. Without the correct settings of emissivity in infrared thermographer, the temperature variation could reach up to as high as 300 %. Coating black paint on the IC surface is a widely used method to assume the IC with constant emissivity and simplify the measurement procedures. Coating a uniform black …

Opportunistic Through-Silicon-Via Inductor Utilization In Lc Resonant Clocks: Concept And Algorithms, Umamaheswara Rao Tida, Varun Mittapalli, Cheng Zhuo, Yiyu Shi

Electrical and Computer Engineering Faculty Research & Creative Works

LC resonant clock is an attracting option for low power on-chip clock distribution designs. However, a major limiting factor to its implementation is the large area overhead due to the conventional spiral inductors. On the other hand, idle through-silicon-vias (TSVs) in three-dimensional integrated circuits (3D ICs) can form vertical inductors with minimal footprint and little noise coupling with horizontal traces, particularly suitable for the application of LC resonant clock. However, due to the strict constraints on the location of idle TSVs, the use of the TSV inductor is limited by the constrained choices of its location, inductance and quality factor. …

Propulsion Theory Of Flapping Airfoils, Comparison With Computational Fluid Dynamics, Doug F. Hunsaker, W. F. Phillips

Mechanical and Aerospace Engineering Faculty Publications

The thrust, required power, and propulsive efficiency of a flapping airfoil as predicted by the well-known Theodorsen model are compared with solutions obtained from grid- resolved inviscid computational fluid dynamics. A straight-forward summary of Theodorsen’s flapping airfoil model is presented using updated terminology and symbols. This shows that both axial and normal reduced frequencies are of significant importance. The axial reduced frequency is based on the chord length and the normal reduced frequency is based on the plunging amplitude. Computational fluid dynamics solutions are presented over the range of both reduced frequencies typically encountered in the forward flight of birds. …

Direct Strength Method For Steel Deck, Randall Keith Dudenbostel, Thomas Sputo, Walter Schultz

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The American Iron and Steel Institute (AISI) Standards Council selected this project as one of four winning research proposals for its 2014 Small Project Fellowship Program. Projectselections were based on several factors, including the potential for long-term impact on the industry; steel industry engagement and co-funding; and results for the AISI standards development committee, the student, and the academic institution. The objective of this project was to determine and compare the behavior and usable strength of existing floor and roof deck sections with both the Direct Strength Method (DSM) and Effective Width Method (EWM). It is anticipated that the results …

Direct Strength Method For Steel Deck, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

With the proposed reorganization of the AISI S100 Standard, the Direct Strength Method (DSM) will take a position of equal footing with the Equivalent Width Method (EWM) for calculating strength. The majority of previous DSM studies focus on C and Z profiles while little study of panel sections, especially steel deck sections, has been performed. A study was undertaken to determine and compare the behavior and usable strength of existing floor and roof deck sections with both DSM and EWM. The Cornell University – Finite Strip Method (CUFSM) was used for the elastic buckling analysis, taking into account the wide, …

2015 Nebraska Groundwater Quality Monitoring Report

Nebraska Department of Environmental Quality: Reports

The 2001 Nebraska Legislature passed LB329 (Neb. Rev. Stat. §46-1304) which, in part, directed the Nebraska Department of Environmental Quality (NDEQ) to report on groundwater quality monitoring in Nebraska. Reports have been issued annually since December 2001. The text of the statute applicable to this report follows: “The Department of Environmental Quality shall prepare a report outlining the extent of ground water quality monitoring conducted by natural resources districts during the preceding calendar year. The department shall analyze the data collected for the purpose of determining whether or not ground water quality is degrading or improving and shall present the …

Machine Learning For Predictive Analytics Made Easy – A Case Study, David Hansen

Faculty Publications - Department of Electrical Engineering and Computer Science

Machine Learning and Artificial Neural Networks are mature, easy-to-use technologies that remain under-utilized. We present a case study demonstrating the ease-of-use and effectiveness of freely available open-source Artificial Neural Network software to predict prospective student matriculation for University admissions. We discuss data collection, formatting and transformation, and assess our results.

Soft, Curved Electrode Systems Capable Of Integration On The Auricle As A Persistent Brain–Computer Interface, James J. S. Norton, Dong Sup Lee, Jung Woo Lee, Woosik Lee, Ohjin Kwon, Philip Won, Sung-Young Jung, Huanyu Cheng, Jae-Woong Jeong, Abdullah Akce, Stephen Umunna, Ilyoun Na, Yong Ho Kwon, Xiao-Qi Wang, Zhuangjian Liu, Ungyu Paik, Yonggang Huang, Timothy Bretl, Woon-Hong Yeo, John A. Rogers

Mechanical and Nuclear Engineering Publications

Recent advances in electrodes for noninvasive recording of electroencephalograms expand opportunities collecting such data for diagnosis of neurological disorders and brain–computer interfaces. Existing technologies, however, cannot be used effectively in continuous, uninterrupted modes for more than a few days due to irritation and irreversible degradation in the electrical and mechanical properties of the skin interface. Here we introduce a soft, foldable collection of electrodes in open, fractal mesh geometries that can mount directly and chronically on the complex surface topology of the auricle and the mastoid, to provide high-fidelity and long-term capture of electroencephalograms in ways that avoid any significant …

Skin-Like Electronics For A Persistent Brain-Computer Interface, Woon-Hong Yeo, Yongkuk Lee

Mechanical and Nuclear Engineering Publications

There exists a high demand for a continuous, persistent recording of non-invasive electroencephalograms in both clinical and research fields. Head-cap electrodes with metal conductors and conductive gels are widely used and considered as the gold standard for such measurement. This physical interface, however, is poorly suited to uninterrupted, long-term use due to the uncomfortable rigid electrodes, skin irritation due to the gel, and electrical degradation as the gel dries. These issues can be addressed by using a newly developed, dry form of electronics. Here, we briefly review a class of soft electronic technology in the aspects of mechanics, materials, and …

Young's Modulus Of [111] Germanium Nanowires, M. Maksud, J. Yoo, C. T. Harris, N. K. R. Palapati, A. Subramanian

Mechanical and Nuclear Engineering Publications

This paper reports a diameter-independent Young’s modulus of 91.9 ± 8.2 GPa for [111] Germaniumnanowires (Ge NWs). When the surface oxide layer is accounted for using a core-shell NW approximation, the YM of the Ge core approaches a near theoretical value of 147.6 ± 23.4 GPa. The ultimate strength of a NW device was measured at 10.9 GPa, which represents a very high experimental-to-theoretical strength ratio of ∼75%. With increasing interest in this material system as a high-capacity lithium-ion battery anode, the presented data provide inputs that are essential in predicting its lithiation-induced stress fields and fracture behavior.

Electrical And Computer Engineering Annual Report 2015, Department Of Electrical And Computer Engineering, Michigan Technological University

Department of Electrical and Computer Engineering Annual Reports

• Faculty Directory
• Faculty Awards
• Google ATAP—Michigan Tech MURA
• The Sound Beneath the Surface
• Advancing Microgrid Deployment
• Clearing the Air
• Power in Their Hands
• Faculty Publications
• Graduate Student Highlights
• Staff Profile—Chito Kendrick
• New ECE Concentrations
• SLAM Systems
• Senior Design and Enterprise
• External Advisory Committee
• Contracts and Grants
• Departmental Statistics
• Lind Memorial Endowed Fellowship

2015 Civil And Environmental Engineering Department News, Department Of Civil And Environmental Engineering, Michigan Technological University

Department of Civil, Environmental, and Geospatial Engineering Newsletters

Table of Contents

• Student Awards
• Faculty News
• Research Projects
• Alumni News
• Department News
• Academy of Civil and Environmental Engineers
• CEE Donor Recognition

Mse Annual Report 2015, Department Of Materials Science And Engineering, Michigan Technological University

Department of Materials Science and Engineering Annual Reports

Table of Contents

• Faculty and Staff News
• Faculty Research
• Student News
• Senior Design Teams
• Outreach
• Alumni News
• MSE by the Numbers
• Endowed Professorships

Double Vault Composting Latrines In Rural Paraguay : Feasible Construction And Optimal Use, Paul T. Pebler

Dissertations, Master's Theses and Master's Reports - Open

Water resource depletion and sanitation are growing problems around the world. A solution to both of these problems is the use of composting latrines, as it requires no water and has been recommended by the World Health Organization as an improved sanitation technology. However, little analysis has been done on the decomposition process occurring inside the latrine, including what temperatures are reached and what variables most affect the composting process. Having better knowledge of how outside variables affect composting latrines can aid development workers on the choice of implementing such technology, and to better educate the users on the appropriate …

Electrochemical Processes In Microfluidics Systems Under Ac Electric Fields, Ran An

Dissertations, Master's Theses and Master's Reports - Open

Alternating current (AC) electric signal has been widely applied in microfluidic systems to induce AC electrokinetic behavior. AC electrokinetic phenomena including AC electrophoresis, AC dielectrophoresis, AC electroosmosis flow and AC electrothermal flow are widely applied in (bio)particle sorting, separation and concentration and micropumps. However, numbers of non-ideal AC electrokinetic behaviors have been reported: human erythrocyte deformation in AC dielectrophoresis system has been observed; flow reversal in AC electroosmosis flow pumps has also been reported. In this dissertation, a systematic study on human erythrocyte crenation in AC dielectrophoresis system was firstly conducted. Multiple possible physical mechanisms inducing cell crenation including temperature, …

A Field Investigation Of Composite Mud Brick Compressive Strength, Kevin D. Hale

Dissertations, Master's Theses and Master's Reports - Open

It has been highlighted in numerous publications that in the field of earth construction there is a strong disconnect between experimental work in the laboratory and its application in the field. The current study attempts to help bridge this gap with a field test conducted in Nampula, Mozambique. Mud bricks were made with a simple hand mold and reinforced with bamboo and straw fibers. Fibers were cut into lengths of 3 cm and 6 cm while being mixed in fractions of 0.125%, 0.25% and 0.50% by weight and compressive strength was measured using an application of the 3-point bending test. …

Undergraduate Education 2015, College Of Engineering, Michigan Technological University

Michigan Tech Engineering Magazine

Table of Contents

• Research
• International
• Design

Feasibility Analysis Of Phase Transition Signals Based On E-Bike Rider Behavior, Sheng Dong, Jibiao Zhou, Li Zhao, Keshuang Tang, Renfa Yang

Mid-America Transportation Center: Final Reports and Technical Briefs

This article evaluates the feasibility of two scenarios of phase transition signals, that is, the flashing green together with red–yellow light and the green countdown together with red countdown, at signalized intersections in terms of e-bike rider behavior. An evaluation framework is first proposed. During the phase transition, the stop-go and start-up behavioral parameters are collected at four intersections in Shanghai, China. Sensitivity analysis is then performed to identify the most significant factors that influence the occurrence of traffic conflicts during the phase transition. Based on the above analysis results, case studies were finally done to look into safety performance …

Engineering Education For High-Ability Students, Branson Lawrence, Diane Hinterlong, Laurie S. Sutherland

Publications & Research

Over the course of their careers, engineers command a breadth and depth of knowledge from science, mathematics, society, politics, and economics that is needed for continuously updating their knowledge of the latest discoveries and advances. Driven by curiosity and enabled by rapid information technology, engineers are kept abreast of the latest advancements almost instantaneously. Today’s scientific knowledge is fluid and complex, yet these traits of engineering remain constant: the ability to define structure, plan, repeatedly evaluate, and align results to the initial objective. Engineering teachers need to facilitate their students’ ability to access information effectively and to apply it appropriately, …

Numerical Investigation On Charring Ablator Geometric Effects: Study Of Stardust Sample Return Capsule Heat Shield, Haoyue Weng, Alexandre Martin

Mechanical Engineering Faculty Publications

Sample geometry is very influential in small charring ablative articles where 1D assumption might not be accurate. In heat shield design, 1D is often assumed since the nose radius is much larger than the thickness of charring. Whether the 1D assumption is valid for the heat shield is unknown. Therefore, the geometric effects of Stardust sample return capsule heat shield are numerically studied using a material response program. The developed computer program models material charring, conductive heat transfer, surface energy balance, pyrolysis gas transport and orthotropic material properties in 3D Cartesian coordinates. Simulation results show that the centerline temperatures predicted …

Contours For Planar Cracks Growing In Three Dimensions, Louis Milton Brock

Mechanical Engineering Faculty Publications

A three-dimensional dynamic steady state analysis for extension of a semi-infinite plane crack is considered. Fracture is brittle and driven by loads applied to the crack surfaces. An analytical solution is obtained, and examined in light of two criteria: energy release (rate) and strain energy density. Introduction of a quasipolar coordinate system allows, for each criterion, generation of a nonlinear first-order differential equation for the distance from the origin to any point on the crack edge. These in turn give insight into the crack contour generated by the crack edge. In particular, for loading by compressive point forces, the equation …

A Multi-Scale Based Model For Composite Materials With Embedded Pzt Filaments For Energy Harvesting, A.E. El-Etriby, M.E. Abdel-Meguid, K.M. Shalan, Tarek Hatem, Yehia Bahei-El-Din

Centre for Advanced Materials

Ambient vibrations are major source of wasted energy, exploiting properly such vibration can be converted to valuable energy and harvested to power up devices, i.e. electronic devices. Accordingly, energy harvesting using smart structures with active piezoelectric ceramics has gained wide interest over the past few years as a method for converting such wasted energy. This paper provides numerical and experimental analysis of piezoelectric fiber based composites for energy harvesting applications proposing a multi-scale modeling approach coupled with experimental verification. The multi-scale approach suggested predicting the behavior of piezoelectric fiber-based composites use micromechanical model based on Transformation Field Analysis (TFA) to …

Traci Impact Assessment Of Transportation Manufacturing Nexus In The U.S.: A Supply Chain-Linked Cradle-To-Gate Lca, Yong Shin Park, Gokhan Egilmez

Mechanical and Industrial Engineering Faculty Publications

Sustainable transportation is an inevitable component of sustainable development intitiatives for mitigating the climate change impacts and stabilizing the rising carbon emissions thus global temperature. In this context, comprehensive analysis of the environmental impact of transportation can play a critical role towards quantifying the midpoint environmental and human health related impacts associated with the transportation activities triggered by manufacturing sectors. This study traces the life cycle impact of the U.S. transportation and manufacturing sectors’ nexus using Tool for the Reduction and Assessment of Chemicals and Other Environmental Impacts (TRACI) in the context of the Economic Input-Output Life Cycle Assessment (EIO-LCA) …

Soil Washing Of Fluorine Contaminated Soil Using Various Washing Solutions, Deok-Hyun Moon, Rae-Hyun Jo, Agamemnon Koutsospyros, Kyung Hoon Cheong, Jeong-Hun Park

Civil Engineering Faculty Publications

Bench-scale soil washing experiments were conducted to remove fluoride from contaminated soils. Five washing solutions including hydrochloric acid (HCl), nitric acid (HNO3), sodium hydroxide (NaOH), sulfuric acid (H2SO4) and tartaric acid (C4H6O6) were tested. The concentration of the washing solutions used ranged from 0.1 M to 3 M with a liquid to solid ratio of 10. The soil washing results showed that the most effective washing solution for the removal of fluoride from contaminated soils was HCl. The highest fluoride removal results of approximately 97% from the contaminated soil were obtained using 3M HCl. The fluoride removal efficiency of the …