Engineering Commons^™

Evaluating The Constructability Of Nudeck Precast Concrete Deck Panels For Kearney Bypass Project, George Morcous, Afshin Hatami, Micheal Assad

Nebraska Department of Transportation: Research Reports

The first generation of precast concrete deck system, NUDECK, was implemented on the Skyline Bridge, Omaha, NE in 2004. The second generation of NUDECK system was developed to further simplify the system and improve its constructability and durability. The new generation consists of full-width full-depth precast concrete deck panels that are 12 ft long to minimize the number of deck panels and transverse joints, and consequently accelerate bridge construction. It also uses covered individual pockets and bundled shear connectors at 4 ft spacing to simplify panel and girder production and eliminate the need for deck overlay. Precast deck panels are …

Cytotoxic Activity Of Triazole-Containing Alkyl Ss-D-Glucopyranosides On A Human T-Cell Leukemia Cell Line, Edward Davis Oldham, Larissa M. Nunes, Armando Varela-Ramirez, Stephen E. Rankin, Barbara L. Knutson, Renato J. Aguilera, Hans-Joachim Lehmler

Chemical and Materials Engineering Faculty Publications

BACKGROUND: Simple glycoside surfactants represent a class of chemicals that are produced from renewable raw materials. They are considered to be environmentally safe and, therefore, are increasingly used as pharmaceuticals, detergents, and personal care products. Although they display low to moderate toxicity in cells in culture, the underlying mechanisms of surfactant-mediated cytotoxicity are poorly investigated.

RESULTS: We synthesized a series of triazole-linked (fluoro)alkyl β-glucopyranosides using the copper-catalyzed azide-alkyne reaction, one of many popular "click" reactions that enable efficient preparation of structurally diverse compounds, and investigate the toxicity of this novel class of surfactant in the Jurkat cell line. Similar to …

The Bridge Newsletter Spring 2015, Missouri University Of Science And Technology

The Bridge Newsletter

-Wastewater treatment technologies that cost less and save energy
-Open windows and air quality
-Bartels displays research
-NASA honors Schonberg

Counter-Doped Jte, An Edge Termination For Hv Sic Devices With Increased Tolerance To The Surface Charge, Chih Fang Huang, Hua Chih Hsu, Kuan Wei Chu, Li Heng Lee, Ming Jinn Tsai, Kung Yen Lee, Feng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a comparison of different techniques for SiC high-voltage devices is performed using numerical simulations. In particular, the method of counter doping (CD) introduced in the junction termination extension (JTE) region to create a multizone termination effect is investigated. Simulation shows that compared with the other edge termination techniques, CD-JTE greatly reduces the sensitivity of breakdown voltage (BV) to JTE doses and surface charges. The multizone CD-JTE with outer rings shows that for a 30-μm thick epi-layer, 90% of the theoretical BV is achievable with a wide tolerance of 11 x 10¹² cm² to the JTE …

Waste And Duplication In Nasa Programs: The Need To Enhance U.S. Space Program Efficiency, Bert Chapman

Libraries Faculty and Staff Scholarship and Research

The U.S. Government faces acute budgetary deficits and national debt problems in the Obama Administration. These problems have been brought about by decades of unsustainable government spending affecting all agencies including the National Aeronautics and Space Administration. (NASA). An outgrowth of this fiscal profligacy is the presence of wasteful and duplicative programs within NASA that prevent this agency from achieving its space science and human spaceflight objectives. These problems occur due to mismanagement of these programs from NASA and the creation of these programs by the U.S. Congress and congressional committees. This occurs because congressional appropriators tend to be more …

Development Of Local Transient Heat Flux Measurements In An Axisymmetric Hybrid Rocket Nozzle, Christopher D'Elia

Master's Theses

A method of performing local transient heat flux measurements in an uncooled axisymmetric hybrid rocket nozzle is presented. Surface temperatures are collected at various axial locations during short duration tests and post processed using finite difference techniques to determine local transient heat fluxes and film coefficients. Comparisons are made between the collected data and the complete Bartz model. Although strong agreement is observed in certain sections of the nozzle, ideal steady state conditions are not observed to entirely validate the Bartz model for hybrid rocket nozzles. An experimental error analysis indicates the experimental heat fluxes are accurate within ±5.2% and …

Evaluation Of The Relationship Between Bulk Organic Precursors And Disinfection Byproduct Formation For Advanced Oxidation Processes, Brooke K. Mayer, Erin Daugherty, Morteza Abbaszadegan

Civil and Environmental Engineering Faculty Research and Publications

Advanced oxidation processes (AOPs) are gaining traction as they offer mineralization potential rather than transferring contaminants between media. However, AOPs operated with limited energy and/or chemical inputs can exacerbate disinfection byproduct (DBP) formation, even as precursors such as dissolved organic carbon, UV₂₅₄, and specific UV absorbance (SUVA) decrease. This study examined the relationship between DBP precursors and formation using TiO₂ photocatalysis experiments, external AOP and non-AOP data, and predictive DBP models. The top-performing indicator, SUVA, generally correlated positively with trihalomethanes and haloacetic acids, but limited-energy photocatalysis yielded contrasting negative correlations. The accuracy of predicted DBP values from …

Modeling Regional Secondary Organic Aerosol Using The Master Chemical Mechanism, Jingyi Li, Meredith Cleveland, Luke D. Ziemba, Robert J. Griffin, Kelley Barsanti, James F. Pankow, Qi Ying

Civil and Environmental Engineering Faculty Publications and Presentations

A modified near-explicit Master Chemical Mechanism (MCM, version 3.2) with 5727 species and 16,930 reactions and an equilibrium partitioning module was incorporated into the Community Air Quality Model (CMAQ) to predict the regional concentrations of secondary organic aerosol (SOA) from volatile organic compounds (VOCs) in the eastern United States (US). In addition to the semi-volatile SOA from equilibrium partitioning, reactive surface uptake processes were used to simulate SOA formation due to isoprene epoxydiol, glyoxal and methylglyoxal. The CMAQ-MCM-SOA model was applied to simulate SOA formation during a two-week episode from August 28 to September 7, 2006. The southeastern US has …

Concomitant Uptake Of Antimicrobials And Salmonella In Soil And Into Lettuce Following Wastewater Irrigation, J. Brett Sallach, Yuping Zhang, Laurie Hodges, Daniel D. Snow, Xu Li, Shannon L. Bartelt-Hunt

Department of Civil and Environmental Engineering: Faculty Publications

The use of wastewater for irrigation may introduce antimicrobials and human pathogens into the food supply through vegetative uptake. The objective of this study was to investigate the uptake of three antimicrobials and Salmonella in two lettuce cultivars. After repeated subirrigation with synthetic wastewater, lettuce leaves and soil were collected at three sequential harvests. The internalization frequency of Salmonella in lettuce was low. A soil horizon-influenced Salmonella concentration gradient was determined with concentrations in bottom soil 2 log CFU/g higher than in top soil. Lincomycin and sulfamethoxazole were recovered from lettuce leaves at concentrations as high as 822 ng/g and …

Understanding Residential Location Choices For Climate Change And Transportation Decision Making: Phase 2 Report, Kelly J. Clifton, Steven R. Gehrke, Kristina Marie Currans

Civil and Environmental Engineering Faculty Publications and Presentations

This research builds on the related Phase 1 project. In this second phase, we continue to study neighborhood and housing preferences that shape the residential location decision process. An online experimental survey tool is developed to investigate lifestyle preferences and tradeoffs that households make in their location decisions. This computer-aided experimental survey draws upon stated preference methods to engage participants in questions about residential location and transportation options. The survey infrastructure was extensively piloted (6-10% response rate). The 10-minute survey can be deployed for future investigations. This infrastructure is a contribution for the integration of visualized neighborhood typologies, or concepts, …

Sensitivity Analysis Of Longitudinal Cracking On Asphalt Pavement Using Mepdg In Permafrost Region, Chen Zhang, Hainian Wang, Zhanping You, Biao Ma

Michigan Tech Publications, Part 1

Longitudinal cracking is one of the most important distresses of asphalt pavement in permafrost regions. The sensitivity analysis of design parameters for asphalt pavement can be used to study the influence of every parameter on longitudinal cracking, which can help optimizing the design of the pavement structure. In this study, 20 test sections of Qinghai–Tibet Highway were selected to conduct the sensitivity analysis of longitudinal cracking on material parameter based on Mechanistic-Empirical Pavement Design Guide (MEPDG) and single factorial sensitivity analysis method. Some computer aided engineering (CAE) simulation techniques, such as the Latin hypercube sampling (LHS) technique and the multiple …

An Affordance-Based Methodology For Package Design, Javier De La Fuente Phd, Stephanie Gustafson, Colleen L. Twomey, Laura Bix

Industrial Technology and Packaging

The term affordance describes an object's utilitarian function or actionable possibilities. Product designers have taken great interest in the concept of affordances because of the bridge they provide relating to design, the interpretation of design and, ultimately, functionality in the hands of consumers. These concepts have been widely studied and applied in the field of psychology but have had limited formal application to packaging design and evaluation. We believe that the concepts related to affordances will reveal novel opportunities for packaging innovation. To catalyse this, presented work had the following objectives: (a) to propose a method by which packaging designers …

Biogeography-Based Optimization In Noisy Environments, Haiping Ma, Minrui Fei, Daniel J. Simon, Zixiang Chen

Electrical and Computer Engineering Faculty Publications

Biogeography-based optimization (BBO) is a new evolutionary optimization algorithm that is based on the science of biogeography. In this paper, BBO is applied to the optimization of problems in which the fitness function is corrupted by random noise. Noise interferes with the BBO immigration rate and emigration rate, and adversely affects optimization performance. We analyse the effect of noise on BBO using a Markov model. We also incorporate re-sampling in BBO, which samples the fitness of each candidate solution several times and calculates the average to alleviate the effects of noise. BBO performance on noisy benchmark functions is compared with …

Energy Process Enabled By Cryogenic Carbon Capture, Mark Jensen

Theses and Dissertations

Global climate change concerns help shape current environmental regulations, which increasingly seek to reduce or capture CO2 emissions. Methods for capturing CO2 emissions from energy processes have been the focus of numerous studies to provide support for those seeking to reduce the environmental impact of their processes. This research has (1) simulated a baseline case of energy-storing cryogenic carbon capture for implementation on a 550 MWe coal fired power plant, (2) presented a novel cryogenic carbon capture process for removing CO2 from natural gas down to arbitrary levels, (3) presented a natural gas liquefaction process that has the ability to …

Does Material Choice Drive Sustainability Of 3d Printing?, Jeremy Faludi, Zhongyin Hu, Shahd Alrashed, Christopher Braunholz, Suneesh Kaul, Leulekal Kassaye

Dartmouth Scholarship

Environmental impacts of six 3D printers using various materials were compared to determine if material choice drove sustainability, or if other factors such as machine type, machine size, or machine utilization dominate. Cradle-to-grave life-cycle assessments were performed, comparing a commercial-scale FDM machine printing in ABS plastic, a desktop FDM machine printing in ABS, a desktop FDM machine printing in PET and PLA plastics, a polyjet machine printing in its proprietary polymer, an SLA machine printing in its polymer, and an inkjet machine hacked to print in salt and dextrose. All scenarios were scored using ReCiPe Endpoint H methodology to combine …

Economic Interrelationships And Impacts Of The Aviation/Aerospace Industry In The State Of Florida Using Input-Output Analysis, Kelly A. Whealan-George

Doctoral Dissertations and Master's Theses

The study provided a detailed description of the interrelatedness of the aviation and aerospace industry with principal industries in Florida and Volusia County (VC) using Input-Output (IO) analysis. Additionally, this research provided an economic impact analysis of the creation of a university research park in Daytona Beach (DB). The economic impact measures included not only direct economic output and industry employment descriptions but also described the multiplier effects in the form of indirect and induced impacts using data for 2012.

This research concluded the average labor income of the aviation and aerospace industry was higher than average labor income in …

Highly-Selective Chemiresistive Sensing And Analysis Of Vapors Using Functionalized Nanotubes, Deon Hines

Dissertations, Theses, and Capstone Projects

Specifically, the project involves the development of a diversified array of nanostructured gas-sensors comprised of selectively, novel surface-functionalized carbon nanotubes (for analyte selectivity by virtue of functionality). Harnessing carbon nanotubes with various electron withdrawing and donating groups help in determining their affinity toward certain prognostic gaseous markers thus increasing specificity of such created sensors. We have devised synthetic routes that have led to the facile production of covalently polyfunctionalized nanotubes in high yield. Seven carbon nanotube analogues were systematically considered and then chemically synthesized, from pristine single-walled nanotubes (SWNT's), for use as the main component of sensory units that was …

Estimation Of Outer-Middle Ear Transmission Using Dpoaes And Fractional-Order Modeling Of Human Middle Ear, Maryam Naghibolhosseini

Dissertations, Theses, and Capstone Projects

Our ability to hear depends primarily on sound waves traveling through the outer and middle ear toward the inner ear. Hence, the characteristics of the outer and middle ear affect sound transmission to/from the inner ear. The role of the middle and outer ear in sound transmission is particularly important for otoacoustic emissions (OAEs), which are sound signals generated in a healthy cochlea, and recorded by a sensitive microphone placed in the ear canal. OAEs are used to evaluate the health and function of the cochlea; however, they are also affected by outer and middle ear characteristics. To …

Development Of Functional Interactions Among Cortical And Trabecular Traits During Growth Of The Lumbar Vertebral Body, Melissa Ramcharan

Dissertations, Theses, and Capstone Projects

Variation in bone traits that contribute to increased fracture risk in the elderly is mainly established in adulthood. Previous studies have shown that in adults, cortical and trabecular traits are functionally related. How variations in traits develop to establish mechanical function in adult bone is not well understood. In this study, we examined temporal changes in the development of cortical and trabecular traits during growth in mouse lumbar vertebral body structures that have a wide range of genetic variants. We determined a sequence of events among traits that would suggest how functional bone structures developed. Examining bones in A/J, C57/BL6 …

Effect Of Nd:Yag Laser Parameters On The Penetration Depth Of A Representative Ni–Cr Dental Casting Alloy, Youssef S. Al Jabbari, Theodoros Koutsoukis, Xanthoula Barmpagadaki, Ehab A. El-Danaf, Raymond Fournelle, Spiros Zinelis

Mechanical Engineering Faculty Research and Publications

The effects of voltage and laser beam (spot) diameter on the penetration depth during laser beam welding in a representative nickel–chromium (Ni–Cr) dental alloy were the subject of this study. The cast alloy specimens were butted against each other and laser welded at their interface using various voltages (160–390 V) and spot diameters (0.2–1.8 mm) and a constant pulse duration of 10 ms. After welding, the laser beam penetration depths in the alloy were measured. The results were plotted and were statistically analyzed with a two-way ANOVA, employing voltage and spot diameter as the discriminating variables and using Holm–Sidak post …

Digitally Controlled Zero-Voltage-Switching Quasi-Resonant Buck Converter, Brian R. Luc

Master's Theses

ABSTRACT

Digitally-Controlled Two-Phase Zero-Voltage-Switching Quasi-Resonant Buck Converter

Brian Luc

This thesis entails the design, construction, and performance analysis of a digitally-controlled two-phase Zero-Voltage Switching Quasi-Resonant (ZVS-QR) buck converter. The converter is aimed to address the issues associated with powering CPUs operating at lower voltage and high current. To evaluate its performance, the Two-Phase ZVS-QR buck converter is compared against a traditional Two-Phase buck converter. The design procedure required to implement both converters through utilizing the characterization curve and formulas derived from their circuit configurations will be presented. Computer simulation of the Two-Phase ZVS-QR buck converter is provided to exhibit its …

Aerospike Rocket Motor Structural Webbing, Andrew Brock

Master's Theses

A labscale hybrid rocket motor test stand has been developed for research at Cal Poly. The primary focus of research using this rig has been the development of regenerative cooling techniques using nitrous oxide as coolant and oxidizer, as well as validation of technologies relating to the annular aerospike nozzle. In order to prevent undesirable deflection of the cantilevered spike, a structural stiffening web, referred to as “The Spider,” is proposed. The Spider resembles a three-spoked wheel, with the aerospike held by the inner hub and the chamber walls abutting the outer radius.

The Spider, placed upstream of the nozzle, …

A Low-Cost Loop Measurement Tool For Dc-Dc Converters, Shouee B. Lin

Master's Theses

Loop measurements are very important in evaluating dynamic performance of DC-DC converters. In this thesis, a small loop measurement tool as a low-cost alternative to a network analyzer is proposed. The tool is particularly useful when a network analyzer is not always available for use, for example when engineers are working on-site with customers or when a network analyzer is not affordable due to their relatively high cost. The design, simulation, and hardware implementation of the inexpensive loop measurement tool will be presented in this thesis. Results from computer simulation and hardware prototype demonstrate the ability of the proposed tool …

Improved Colorization For Night Vision System Based On Image Splitting, Ehsan A. Ali, Samuel Peter Kozaitis

Electrical Engineering and Computer Science Faculty Publications

The success of a color night navigation system often depends on the accuracy of the colors in the resulting image. Often, small regions can incorrectly adopt the color of large regions simply due to size of the regions. We presented a method to improve the color accuracy of a night navigation system by initially splitting a fused image into two distinct sections before colorization. We split a fused image into two sections, generally road and sky regions, before colorization and processed them separately to obtain improved color accuracy of each region. Using this approach, small regions were colored correctly when …

Synthesis And Characterization Of A Novel Polyacetal & Design And Preparation Of Superhydrophobic Photocatalytic Surfaces, Yuanyuan Zhao

Dissertations, Theses, and Capstone Projects

Polyacetal polymers are thermoplastic resins that play an important role in industry because of numerous industrial applications including automobile; household appliance; etc. The first part of this thesis (Chapter 2) is about the synthesis of a new acetal copolymer that exhibits superior thermal stability. The second part of this thesis (Chapter 3) is about the preparation and applications of TiO₂-based polymer nanocomposite films, where the reactive oxygen species (ROS) are generated on the solid surface. Catalytic nanocomposite films are an active area of research because of their potential uses for environmental remediation and chemical synthesis. Furthermore, to …

Biomolecule Mediating Synthesis Of Inorganic Nanoparticles And Their Applications, Zengyan Wei

Dissertations, Theses, and Capstone Projects

Project 1.

The conventional phage display technique focuses on screening peptide sequences that can bind on target substrates, however the selected peptides are not necessary to nucleate and mediate the growth of the target inorganic crystals, and in many cases they only show moderate affinity to the targets. Here we report a novel phage display approach that can directly screen peptides catalytically growing inorganic nanoparticles in aqueous solution at room temperature. In this study, the phage library is incubated with zinc precursor at room temperature. Among random peptide sequences displayed on phages, those phages that can grow zinc oxide (ZnO) …

Non-Dimensional Approach For Static Balancing Of Rotational Flexures, Ezekiel G. Merriam, Larry L. Howell

Faculty Publications

This work presents a nondimensional method for statically balancing flexural hinges, including those with stiffness that varies with load. Using a set of non-dimensional parameters, it is shown that one can quickly design a balancing mechanism for an idealized hinge/torsion spring system. This method is then extended to load-dependent systems, and is demonstrated with the design of a balanced cross-axis-flexural pivot with stiffness that varies as a function of compressive preload. A physical prototype is built and tested to verify the design method. The prototype demonstrates an average stiffness reduction of 87% over an 80 degree deflection range. The method …

Con-Resistant Trust For Improved Reliability In A Smart Grid Special Protection System, Crystal M. Shipman, Kenneth M. Hopkinson, Juan L. Lopez Jr.

Faculty Publications

This paper applies a con-resistant trust mechanism to improve the performance of a communications-based special protection system to enhance its effectiveness and resiliency. Smart grids incorporate modern information technologies to increase reliability and efficiency through better situational awareness. However, with the benefits of this new technology come the added risks associated with threats and vulnerabilities to the technology and to the critical infrastructure it supports. The research in this paper uses con-resistant trust to quickly identify malicious or malfunctioning (untrustworthy) protection system nodes to mitigate instabilities. The con-resistant trust mechanism allows protection system nodes to make trust assessments based on …

Molecular Modeling Of Sigma 1 And Sigma 2 Receptor Ligands: Pharmacophore Development And Comparison Using Discotech And Bioactivity Prediction Comparison Of Ab Initio And Density Functional Comfa Studies For Spiro And Other Receptor Ligands, Lisa M. Kardos

Dissertations

The role of the biological receptor is currently being studied by researchers in medicine. Information about sigma receptors in particular can be gained by studying the ligands associated with each type, sigma 1 or sigma 2. Sigma 1 receptor ligands consist of drug candidates that often have psychiatric and neurological applications; sigma 2 receptor ligands consist of drug candidates that have been linked with cancer treatment among other applications.

Molecular modeling of biological receptor ligands often encompasses pharmacophore development and Comparative Molecular Field Analysis (CoMFA). Pharmacophore models are developed to understand the unique features such as binding groups that make …

Reliability Study Of Zr And Al Incorporated Hf Based High-K Dielectric Deposited By Advanced Processing, Md Nasir Uddin Bhuyian

Dissertations

Hafnium-based high-x dielectric materials have been successfully used in the industry as a key replacement for SiO₂ based gate dielectrics in order to continue CMOS device scaling to the 22-nm technology node. Further scaling according to the device roadmap requires the development of oxides with higher x values in order to scale the equivalent oxide thickness (EOT) to 0.7 nm or below while achieving low defect densities. In addition, next generation devices need to meet challenges like improved channel mobility, reduced gate leakage current, good control on threshold voltage, lower interface state density, and good reliability. In order to …