Engineering Commons^™

Robust Textural Features For Real Time Face Recognition, Chen Cui, Vijayan K. Asari, Andrew D. Braun

Electrical and Computer Engineering Faculty Publications

Automatic face recognition in real life environment is challenged by various issues such as the object motion, lighting conditions, poses and expressions. In this paper, we present the development of a system based on a refined Enhanced Local Binary Pattern (ELBP) feature set and a Support Vector Machine (SVM) classifier to perform face recognition in a real life environment. Instead of counting the number of 1's in ELBP, we use the 8-bit code of the thresholded data as per the ELBP rule, and then binarize the image with a predefined threshold value, removing the small connections on the binarized image. …

Assessing The Water Quality Response To An Alternative Sewage Disposal Strategy At Bathing Sites On The East Coast Of Ireland, Zeinab Bedri, John O'Sullivan, Louise Deering, Katalin Demeter, Bartholomew Masterson, Wim Meijer, Gregory O'Hare

Articles

A three-dimensional model is used to assess the bathing water quality of Bray and Killiney bathing sites in Ireland following changes to the sewage management system. The model, firstly calibrated to hydrodynamic and water quality data from the period prior to the upgrade of the Wastewater Treatment Works (WwTW), was then used to simulate Escherichia coli (E. coli) distributions for discharge scenarios of the periods prior to and following the upgrade of the WwTW under dry and wet weather conditions. E. coli distributions under dry weather conditions demonstrate that the upgrade in the WwTW has remarkably improved the bathing water …

Management Challenges In Nurturing A Safe Work Environment, Thomas W. Camm

Mining Engineering

As engineers, we are trained to use logical, rational problem solving to insure our mines operate at maximum efficiency. We tend to use the same technical approach to design safety into all mining systems. This works well for machines, but not so much for the human component. Recent insights in the field of behavioral economics provide useful ideas for addressing the fact that we are driven by emotions more often than by rational thought. Understanding the nonrational aspect of human behavior is an important piece of any safety system design.

Using The New Dual-Polarimetric Capability Of Wsr-88d To Eliminate Anomalous Propagation And Wind Turbine Effects In Radar-Rainfall, Bong Chul Seo, Witold F. Krajewski, Kumar Vijay Mishra

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study addresses the effect that the interaction between anomalous radar beam propagation (AP) and wind turbines that are located far from the radar has on radar-rainfall estimates. The interference of wind turbines in radar observations may lead to significant errors in rainfall estimates since wind turbines are often clustered to form wind farms. In this study, we propose a novel approach - based on the polarimetric capability recently added to the WSR-88D NEXRAD radars - that identifies and eliminates wind turbine clutter along with common ground clutter AP effects. Our primary objective is to devise a physically meaningful and …

Wearout Resilience In Nocs Through An Aging Aware Adaptive Routing Algorithm, Dean Michael Ancajas, Kshitij Bhardwaj, Koushik Chakraborty, Sanghamitra Roy

Electrical and Computer Engineering Faculty Publications

Continuous technology scaling has made aging mechanisms, such as negative bias temperature instability and electromigration primary concerns in network-on-chip (NoC) designs. In this paper, we extensively analyze the effects of these aging mechanisms on NoC routers and links. We observe a critical need of a robust aging-aware routing algorithm that not only reduces power-performance overheads caused due to aging degradation, but also minimizes the stress experienced by heavily utilized routers and links. To solve this problem, we propose an aging-aware adaptive routing algorithm and a router microarchitecture that routes the packets along the paths, which are both least congested and …

An Empirical Study Of Critical Success Factors Of Mobile Learning Platform From The Perspective Of Instructors, Muasaad Alrasheedi, Luiz Fernando Capretz

Electrical and Computer Engineering Publications

Mobile learning is newest learning platform and based on the rapid rate of proliferation of mobile technology throughout the world is expected to grow at a rapid rate. However, the adoption of m-Learning is proceeding at a cautious rate. This mismatch in the rate of growth of the technology itself and the use of the technology in learning is a subject of extensive interest to researchers. However, research in the area has been mostly focused on understanding the success factors of the platform from learners’ perspective. In this research, we have conducted an extensive analysis of the extent to which …

Performing A Nutrient Diffusion Substrata Test, Dillon J. Devitt, Kyungnan (Karen) Min, Suzette R. Burckhard, Joanita M. Kant

Civil and Environmental Engineering Faculty and Student Publications

A White Paper presented to Oglala Lakota College for use in pre-engineering class exercises.

Available nutrients, primarily nitrogen (N) and phosphorus (P), control the growth of periphyton in lakes and streams. The nutrient diffusing substrata (NDS) is an economic and replicable way to determine whether an aquatic environment is limited by a particular nutrient (Capps et al., 2011). The NDS commonly uses clay pots, plastic cups, or periphytometers (Rugenski et al., 2008). The NDS in this paper uses plastic cups based on Methods in Stream Ecology (Hauer and Lamberti, 2007). The agar solution is mixed with 8 different types of …

Watershed Modeling Using Arc Hydro Tools. Geo Hms, And Hec-Hms, Tyler Baumbach, Suzette R. Burckhard, Joanita M. Kant

Civil and Environmental Engineering Faculty and Student Publications

A White Paper presented to Oglala Lakota College for use in pre-engineering class exercises. This paper is meant to be used as a supplemental aid to the tutorials and user’s manuals stated in the references. It is assumed that the user has basic knowledge of ArcGIS 10.

The purpose of this paper is to provide a real world example of how to develop and analyze a watershed. The watershed examined was the Upper White River Sub-basin Watershed which was recreated digitally with the aid of computer software and spatial data. Data links for needed files are provided throughout the …

Clustering Header Categories Extracted From Web Tables, George Nagy, David W. Embley, Mukkai Krishnamoorthy, Sharad C. Seth

School of Computing: Conference and Workshop Papers

Revealing related content among heterogeneous web tables is part of our long term objective of formulating queries over multiple sources of information. Two hundred HTML tables from institutional web sites are segmented and each table cell is classified according to the fundamental indexing property of row and column headers. The categories that correspond to the multi-dimensional data cube view of a table are extracted by factoring the (often multi-row/column) headers. To reveal commonalities between tables from diverse sources, the Jaccard distances between pairs of category headers (and also table titles) are computed. We show how about one third of our …

Characterization Of Sequential Collagen-Poly(Ethylene Glycol) Diacrylate Interpenetrating Networks And Initial Assessment Of Their Potential For Vascular Tissue Engineering, Dany J. Munoz Pinto, Andrea C. Jimenez-Vergara, T. P. Gharat, M. S. Hahn

Engineering Faculty Research

Collagen hydrogels have been widely investigated as scaffolds for vascular tissue engineering due in part to the capacity of collagen to promote robust cell adhesion and elongation. However, collagen hydrogels display relatively low stiffness and strength, are thrombogenic, and are highly susceptible to cell-mediated contraction. In the current work, we develop and characterize a sequentially-formed interpenetrating network (IPN) that retains the benefits of collagen, but which displays enhanced mechanical stiffness and strength, improved thromboresistance, high physical stability and resistance to contraction. In this strategy, we first form a collagen hydrogel, infuse this hydrogel with poly(ethylene glycol) diacrylate (PEGDA), and subsequently …

Bakken Flares And Satellite Images, University Of North Dakota. Energy And Environmental Research Center, Xiaodong Zhang

EERC Brochures and Fact Sheets

Fact sheet refuting a magazine article about Bakken gas flares and satellite images. Includes research into gas flares and satellite images by the University of North Dakota and the Energy & Environmental Research Center. [This item is an outdated or superseded version and retained for historical purposes only. It may no longer reflect current information, policies, or practices.]

Wind Turbine Rotor Fragments: Impact Probability And Setback Evaluation, Scott M. Larwood, C. P. Van Dam

All Faculty Articles - School of Engineering and Computer Science

With increasing installation of wind turbines, the exposure to the hazard of impact from blade fragments increases. Local authorities use setbacks to reduce the risk by limiting the distance from wind turbines to adjacent property lines and dwellings. Unduly conservative setbacks are a deterrent to wind energy development. To determine appropriate setbacks, the authors developed a fragment trajectory model based on fragment rotation and aerodynamics. The model was used to simulate fragment trajectories at various rotor speeds, with randomly generated inputs for wind speed, wind direction, rotor azimuth, and rotor break position. Four sizes of wind turbines were studied, with …

Characterization Of Geometrically Necessary Dislocation Content With Ebsd-Based Continuum Dislocation Microscopy, Tim Ruggles

Theses and Dissertations

Modeling of plasticity is often hampered by the difficulty in accurately characterizing dislocationdensity on the microscale for real samples. It is particularly difficult to resolve measureddislocation content onto individual dislocation systems at the length scales most commonly of interestin plasticity studies. Traditionally, dislocation content is analyzed at the continuum levelusing the Nye tensor and the fundamental relation of continuum dislocation theory to interpret informationmeasured by diffraction techniques, typically EBSD or High Resolution EBSD. In thiswork the established Nye-Kroner method for resolving measured geometrically necessary dislocationcontent onto individual slip systems is assessed and extended. Two new methods are alsopresented to relieve …

Compressibility Measurement And Modeling To Optimize Flow Simulation Of Vacuum Infusion Processing For Composite Materials, Paul Hannibal

Theses and Dissertations

Out-of-autoclave manufacturing processes for composite materials are increasing in importance for aerospace and automotive industries. Vacuum Infusion processes are leading the push to move out of the autoclave. An understanding of the various process parameters associated with resin infusion is necessary to produce quality product. Variance in compaction, resin, and vacuum pressures are studied, concentrating on developing a compaction pressure profile as it relates to fiber volume fraction. The purpose of this research is twofold: (1) to show and quantify the existence of a resin pressure gradient in compression testing using rigid tooling, and (2) to use measured test data …

Computational Fluid Dynamics Simulation Of Intracranial Aneurysms - Comparing Size And Shape, Zifeng Yang, Hongtao Yu, George P. Huang, Ryan Schwieterman, Bryan Ludwig

Mechanical and Materials Engineering Faculty Publications

Objective: To study the hemodynamics of an anatomic internal carotid artery aneurysm derived from a patient-specific model and then manipulate into two phantom morphologies: one growing uniformly by size and the other changing shape unevenly. Methods: The computational model of the saccular, internal carotid artery, aneurysm was constructed from 3D rotational, digitally subtracted, catheter angiography images. Computational fluid dynamics simulations were performed under pulsatile cardiac flow conditions. Velocity vectors, streamlines, pressure, and wall shear stress (WSS) and its variance distributions were quantitatively visualized. Results: The maximum pressure and WSS from the time-averaged distribution on the inside saccular surface of the …

The Development Of Advanced Control Laboratories, Matthew Randall Winter

Graduate Theses - Mechanical Engineering

In this thesis, a series of advanced control labs have been developed for use in the senior/graduate-level advanced controls course. Advanced controls laboratories are non-existent at many institutions, and since hands on laboratories are such an integral part of engineering education it was decided to develop a few. The goal of these laboratories is to reinforce some of the more advanced topics in control theory. Topics of the laboratories include Parameter Identification, Eigenstructure Assignment, Linear Optimal Regulators and Linear Quadratic Gaussian Control with Loop Transfer Recovery. These laboratories are carried out on the Educational Control Products Model 210 Rectilinear Control …

Investigating The Solubility And Cytocompatibility Of Cao-Na2o-Sio2/Tio2 Bioactive Glasses, Anthony W. Wren, Aisling Coughlan, Courtney M. Smith, Sarah P. Hudson, Fathima R. Laffir, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study aims to investigate the solubility of a series of titanium (TiO₂)-containing bioactive glasses and their subsequent effect on cell viability. Five glasses were synthesized in the composition range SiO₂-Na₂O-CaO with 5 mol % of increments TiO₂ substituted for SiO₂. Glass solubility was investigated with respect to (1) exposed surface area, (2) particle size, (3) incubation time, and (4) compositional effects. Ion release profiles showed that sodium (Na⁺) presented high release rates after 1 day and were unchanged between 7 and 14 days. Calcium (Ca²⁺) release …

Secure Transmission Of Static And Dynamic Images Via Chaotic Encryption In Acousto-Optic Hybrid Feedback With Profiled Light Beams, Monish Ranjan Chatterjee, Fares S. Almehmadi

Electrical and Computer Engineering Faculty Publications

Secure information encryption via acousto-optic (AO) chaos with profiled optical beams indicates substantially better performance in terms of system robustness. This paper examines encryption of static and time-varying (video) images onto AO chaotic carriers using Gaussian-profile beams with diffracted data numerically generated using transfer functions. The use of profiled beams leads to considerable improvement in the encrypted signal.

While static image encryption exhibits parameter tolerances within about ±10% for uniform optical beams, profiled beams reduce the tolerance to less than 1%, thereby vastly improving both the overall security of the transmitted information as well as the quality of the image …

Multiple Object Detection In Hyperspectral Imagery Using Spectral Fringe-Adjusted Joint Transform Correlator, Paheding Sidike, Vijayan K. Asari, Mohammad S. Alam

Electrical and Computer Engineering Faculty Publications

Hyperspectral imaging (HSI) sensors provide plenty of spectral information to uniquely identify materials by their reflectance spectra, and this information has been effectively used for object detection and identification applications. Joint transform correlation (JTC) based object detection techniques in HSI have been proposed in the literatures, such as spectral fringe-adjusted joint transform correlation (SFJTC) and with its several improvements.

However, to our knowledge, the SFJTC based techniques were designed to detect only similar patterns in hyperspectral data cube and not for dissimilar patterns. Thus, in this paper, a new deterministic object detection approach using SFJTC is proposed to perform multiple …

Scene Projection By Non-Linear Transforms To A Geo-Referenced Map For Situational Awareness, Kevin C. Krucki, Vijayan K. Asari

Electrical and Computer Engineering Faculty Publications

There are many transportation and surveillance cameras currently in use in major cities that are close to the ground and show scenes from a perspective point of view. It can be difficult to follow an object of interest across multiple cameras if many of these cameras are in the same area due to the different orientations of these cameras. This is especially true when compared to wide area aerial surveillance (WAAS).

To correct this problem, this research provides a method to non-linearly transform current camera perspective views into real world coordinates that can be placed on a map. Using a …

Recent Progress In Wide-Area Surveillance: Protecting Our Pipeline Infrastructure, Vijayan K. Asari, Paheding Sidike, Chen Cui, Varun Santhaseelan

Electrical and Computer Engineering Faculty Publications

The pipeline industry has millions of miles of pipes buried along the length and breadth of the country. Since none of the areas through which pipelines run are to be used for other activities, it needs to be monitored so as to know whether the right-of-way (RoW) of the pipeline is encroached upon at any point in time.

Rapid advances made in the area of sensor technology have enabled the use of high end video acquisition systems to monitor the RoW of pipelines. The images captured by aerial data acquisition systems are affected by a host of factors that include …

Producing High Strength Aluminum Alloy By Combination Of Equal Channel Angular Pressing And Bake Hardening, Hamid Alihosseini, Mohsen Asle Zaeem, Kamran Dehghani, Ghader Faraji

Materials Science and Engineering Faculty Research & Creative Works

A combination of severe plastic deformation by equal channel angular pressing (ECAP) and bake hardening (BH) was used to produce high strength ultrafine-grained AA6061 aluminum alloy. 2, 4 and 8 passes of ECAP were performed, and the bake hardenability of samples was tested by 6% pre-straining followed by baking at 200 °C for 20 min. The microstructures obtained for various passes of ECAP were characterized by XRD, EBSD, and TEM techniques. The microstructures were refined from an average grain size of 20 µm to 212 nm after 8 passes of ECAP. Maximum bake hardenability of 110 MPa, and final yield …

Assessment Program For Kentucky Traffic Records, Lenahan O'Connell, Eric R. Green, Reginald R. Souleyrette

Kentucky Transportation Center Research Report

During 2013, the Kentucky Transportation Center identified 117 potential performance metrics for the ten databases in the Kentucky Traffic Records System. This report summarizes the findings of three main tasks completed in 2014: (1) assessment of the utility of each metric and/or the availability of data; (2) collection of data on the metrics deemed useful with available data; and (3) assessment the possibility of incorporating a number of the Model Minimum Uniform Crash Criteria (MMUCC) elements into the CRASH database. Interviews with liaisons for each database reduced the number of metrics from 117 to 51. The reason for rejecting the …

Label-Free Detection Of Cancer Cells With Polysilicon Sensor Chips And Biomolecule-Assisted Synthesis Of Shape-Controlled Nanoparticles, Menglu Shi

Dissertations, Theses, and Capstone Projects

Constant effort has been made for the detection of cancer cells. Recently, ovarian and kidney cancer cell lines have been shown to have higher cellular elasticity as compared to normal cells assessed by monitoring the degree of deformation under hyposmotic pressure. This method has been modified and applied to various cases. In cancer cells, the oncogenic mutant p53 (mtp53) protein is present at high levels and contributes to tumor growth and metastasis. Herein the influence of mtp53 on the mechanical property of breast cancer cells was assessed by monitoring the swelling ratio of cells with time using the impedance measurements. …

Analytical Modeling Of A Novel High-Q Disk Resonator For Liquid-Phase Applications, Mohomad S. Sotoudegan, Stephen M. Heinrich, Fabien Josse, Nicholas J. Nigro, Isabelle Dufour, Oliver Brand

Civil and Environmental Engineering Faculty Research and Publications

To overcome the detrimental effects of liquid environments on microelectromechanical systems resonator performance, the in-fluid vibration of a novel disk resonator supported by two electrothermally driven legs is investigated through analytical modeling and the effects of the system’s geometric/material parameters on the dynamic response are explored. The all-shear interaction device (ASID) is based on engaging the surrounding fluid primarily through shearing action. The theory comprises a continuous-system, multimodal model, and a single-degree-of-freedom model, the latter yielding simple formulas for the fundamental-mode resonant characteristics that often furnish excellent estimates to the results based on the more general model. Comparisons between theoretical …

The Feasibility Of Imaging Myocardial Ischemic/Reperfusion Injury Using 99mTc-Labeled Duramycin In A Porcine Model, Lei Wang, Feng Wang, Wei Fang, Steven E. Johnson, Said H. Audi, Michael Zimmer, Thomas A. Holly, Daniel C. Lee, Bao Zhu, Haibo Zhu, Ming Zhao

Biomedical Engineering Faculty Research and Publications

When pathologically externalized, phosphatidylethanolamine (PE) is a potential surrogate marker for detecting tissue injuries. ^99mTc-labeled duramycin is a peptide-based imaging agent that binds PE with high affinity and specificity. The goal of the current study was to investigate the clearance kinetics of ^99mTc-labeled duramycin in a large animal model (normal pigs) and to assess its uptake in the heart using a pig model of myocardial ischemia–reperfusion injury.

Methods

The clearance and distribution of intravenously injected ^99mTc-duramycin were characterized in sham-operated animals (n = 5). In a closed chest model of myocardial ischemia, coronary occlusion was induced …

Computational Multiscale Modeling And Characterization Of Piezoresistivity In Fuzzy Fiber Reinforced Polymer Composites, Xiang Ren, Josh Burton, Gary D. Seidel, Khalid Lafdi

Chemical and Materials Engineering Faculty Publications

In this paper, the piezoresistive response (i.e. the change of resistance under the application of strain) of polymer composites reinforced by a novel material known as fuzzy fibers is characterized by using single tow piezoresistive fragmentation tests and modeled by using a 3D computational multiscale model based on the finite element analysis. In the characterization work, the fuzzy fiber tow is embedded in a dog-bone specimen infused by epoxy, with resistance and displacement measured simultaneously to obtain its piezoresistive response. An approximately linear and stable piezoresistive response is observed within the fuzzy fiber tow region yielding gauge factors on average …

An Admiral And Courageous Impatience, William "Ike" Eisenhauer

Engineering and Technology Management Faculty Publications and Presentations

In this article the author focuses on Hyman G. Rickover, a U.S. Navy Admiral, and his philosophy of engineering ethics. He mentions Rickover's view of the proper operation and engineering of a nuclear reactor plant, from which industrial engineers in healthcare can drew ideas to make healthcare systems reliable. Also mentioned is the book "The Rickover Effect" by Theodore Rockwell.

Effects Of Three Dry Powder Inhalers On Deposition Of Aerosolized Medicine In The Human Oral-Pharyngeal-Laryngeal Regions, Mohammed Ali

Technology Faculty Publications and Presentations

The dry powder inhaler (DPI) is a popular, effective and convenient drug delivery device for inhalation therapy to treat asthma. However, a large quantity (approximately 54%) of inhaled aerosols deposit in the oropharyngeal region. Deposition in this region is undesirable because it provides minimum therapeutic benefits and has adverse localized or systemic side effects. This study reports a method of examining electrostatic charge effects on deposition of three DPI aerosols (Spiriva^™ Handihaler, Advair Diskus^™, and Pulmicort^™ Turbohaler) in a cadaver-based cast of the human oral-pharyngeal-laryngeal (OPL) regions. Experimental aerosols were generated from the three commercially available …

Semi-Modular Delay Model Revisited In Context Of Relative Timing, Hoon Park, Anping He, Marly Roncken, Xiaoyu Song

Electrical and Computer Engineering Faculty Publications and Presentations

A new definition of semi-modularity to accommodate relative timing constraints in self-timed circuits is presented. While previous definitions ignore such constraints, the new definition takes them into account. The difference on a design solution for a well-known speed-independent circuit implementation of the Muller C element and a set of relative timing constraints that renders the implementation hazard free is illustrated. The old definition produces a false semi-modularity conflict that cannot exist due to the set of imposed constraints. The new definition correctly accepts the solution.