Engineering Commons^™

Control-Oriented Modeling For Open-Cathode Fuel Cell Systems, Joseph Ishaku, Nima Lotfi, Hesam Zomorodi, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Due to numerous advantages of Polymer Electrolyte Fuel Cells (PEMFCs), they are becoming the mainstream fuel cell of choice for different applications. Open-cathode PEMFCs, in particular, are gaining increased popularity in low to medium power applications due to their simple structure and low parasitic losses. However, in order to achieve safe operation, increased durability and optimal performance, advanced control algorithms, which typically require control-oriented models, need to be implemented on open-cathode fuel cell systems. The open-cathode fuel cell system includes the fuel cell stack and all of the auxiliary components that are vital for its operation. In this paper, control-oriented …

Verifiable Frequency-Limited Adaptive Control Performance Based On Linear Matrix Inequalities, Mario Luca Fravolini, Tansel Yucelen, Daniel Wagner, Ali Albattat, Paolo Valigi

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Adaptive controllers are often criticized for the lack of clear and easy verification procedures that relate design parameters to time domain performance especially during transients. For this reason, it is a challenge to rigorously certify existing adaptive control algorithms. To that end, we propose a validation framework where stability and performance requirements are formulated in terms of Linear Matrix Inequalities. This brings the advantage that adaptive controller design and verification can be analyzed and optimized via the solution of a convex optimization whose objective is to guarantee the evolution of the error components within an a-priori specified domain. This approach …

Radical Species Generation And Their Lifetime Extension By A Femtosecond And Nanosecond Dual-Laser System, Cheng Hsiang Lin, Zhi Liang, Jun Zhou, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

For Many Material Processes, Desired Radical Species at Excited States Are Produced Which Interact with a Given Substrate for a Certain Period of Time Allowing Chemical Reactions between Them to Occur and Complete. Hence, It is Important to Maintain the Population of the Excited Radical Species for an Extended Period of Time, I.e., their Lifetime, Which is Defined as the Time for Emission Intensity to Decay to 1/e of the Initial Intensity. in This Study, a Femtosecond-Nanosecond (Fs-Ns) Dual-Laser System Was Employed to Generate Desired Radical Species Via the Fs Laser And, Then, to Extend the Lifetime of the Radical …

Association Between Vitamin D Receptor Gene Polymorphisms (Fok1 And Bsm1) And Osteoporosis: A Systematic Review, Zahra Mohammadi, Fateme Fayyazbakhsh, Mehdi Ebrahimi, Mahsa M. Amoli, Patricia Khashayar, Mahboubeh Dini, Reza Nezam Zadeh, Abbasali Keshtkar, Hamid Reza Barikani

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Osteoporosis is a Health Concern Characterized by Reduced Bone Mineral Density (BMD) and Increased Risk of Fragility Fractures. Many Studies Have Investigated the Association between Genetic Variants and Osteoporosis. Polymorphism and Allelic Variations in the Vitamin D Receptor Gene (VDR) Have Been Found to Be Associated with Bone Mineral Density. However, Many Studies Have Not Been Able to Find This Association. Literature Review Was Conducted in Several Databases, Including MEDLINE/Pubmed, Scopus, EMBASE, Ebsco, Science Citation Index Expanded, Ovid, Google Scholar, Iran Medex, Magiran and Scientific Information Database (SID) for Papers Published between 2000 and 2013 Describing the Association between Fok1 …

Form Pressure Generated By Fresh Concrete: A Review About Practice In Formwork Design, Tilo Proske, Kamal Khayat, Ahmed Omran, Olaf Leitzbach

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this paper, several current industrial practices in formwork design are presented focusing on the normative calculation of the form pressure. Most of the current Standards are devoting for the design of the formwork for the normal vibrated concrete. Currently, the Standards are being updated to include provisions for the newly adapted concrete, such as the flowable concrete and self-consolidating concrete. However, the experience with these methods is still limited. The available methods for calculating the formwork pressure for the flowable concrete and SCC are based on measuring the shear strength of concrete using different concepts, such as the setting …

Use Of Innovative Techniques To Enhance The Hydraulic Disinfection Efficiency Of Drinking Water Contact Tanks, J. J. Kattnig, S. K. Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The focus of this study was to understand the complex nature of flow dynamics within water disinfection contact tanks and to use this understanding in the development of beneficial tank modifications. Methods involved in this process included the use of computational fluid dynamics (CFD) and physical conservative tracer studies. Attempted tank alterations included the installation of baffles, inlet modification, and the use of industrial packing material. Tested modifications aimed at altering existing velocity fields to increase the hydraulic disinfection efficiency of a given system. Hydraulic efficiency was measured through the use of residence time distribution (RTD) curves and the well-known …

Semiactive Virtual Control Method For Robots With Regenerative Energy-Storing Joints, Hanz Richter, Daniel J. Simon, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

A framework for modeling and control is introduced for robotic manipulators with a number of energetically self-contained semiactive joints. The control approach consists of three steps. First, a virtual control design is conducted by any suitable means, assuming a fully-actuated system. Then, virtual control inputs are matched by a parameter modulation law. Finally, the storage dynamics are shaped using design parameters. Storage dynamics coincide with the system's internal dynamics under exact virtual control matching. An internal energy balance equation and associated self-powered operation condition are given for the semiactive joints. This condition is a structural characteristic of the system and …

Synthesis And Characterization Of Novel Polyester Scaffolds From Sugarcane Industry By-Products For Use In Skin And Bone Tissue Engineering, Akanksha Kanitkar

LSU Doctoral Dissertations

The aim of this work was to synthesize non-toxic, biodegradable polyesters of aconitic acid, cinnamic acid and glycerol from by-products of the sugarcane industry as scaffolds for skin and bone tissue engineering. Utilizing the by-products, molasses and sugarcane bagasse, not only add value to the cane industry, but also paves path for synthesizing novel bio-based materials from the isolated specialty chemicals. Molasses contain an economically recoverable quantity of aconitic acid and its extraction was studied in detail as a part of this work. The yields of recovered aconitic acid varied from 25–69% depending on the extraction conditions. Under all the …

Dielectric Characterization Of Coastal Cartilage Chondrocytes, Michael W. Stacey, Ahmet C. Sabuncu, Ali Beskok

Bioelectrics Publications

BACKGROUND: Chondrocytes respond to biomechanical and bioelectrochemical stimuli by secreting appropriate extracellular matrix proteins that enable the tissue to withstand the large forces it experiences. Although biomechanical aspects of cartilage are well described, little is known of the bioelectrochemical responses. The focus of this study is to identify bioelectrical characteristics of human costal cartilage cells using dielectric spectroscopy.

METHODS: Dielectric spectroscopy allows non-invasive probing of biological cells. An in house computer program is developed to extract dielectric properties of human costal cartilage cells from raw cell suspension impedance data measured by a microfluidic device. The dielectric properties of chondrocytes are …

Calcium-Mediated Pore Expansion And Cell Death Following Nanoelectroporation, Olga N. Pakhomova, Betsy Gregory, Iurii Semenov, Andrei G. Pakhomov

Bioelectrics Publications

Opening of long-lived pores in the cell membrane is the principal primary effect of intense, nanosecond pulsed electric field (nsPEF). Here we demonstrate that the evolution of pores, cell survival, the time and the mode of cell death (necrotic or apoptotic) are determined by the level of external Ca²⁺ after nsPEF. We also introduce a novel, minimally disruptive technique for nsEP exposure of adherent cells on indium tin oxide (ITO)-coated glass coverslips, which does not require cell detachment and enables fast exchanges of bath media. Increasing the Ca²⁺ level from the nominal 2–5 μM to 2 mM for …

Introduction To Fourth Special Issue On Electroporation-Based Technologies And Treatments, Damijan Miklavčič, Lluis M. Mir, P. Thomas Vernier

Bioelectrics Publications

This fourth special electroporation-based technologies and treatments issue of the Journal of Membrane Biology contains reports on recent developments in the field of electroporation by participants in the 7th International Workshop and Postgraduate Course on electroporation based technologies and treatments (EBTT 2013) held in Ljubljana, November 17–23, 2013. The 65 participants included faculty members, invited lecturers, special guests, and young scientists, and students from 16 countries. In addition to lectures on the fundamentals, this year’s sessions included talks on microbial inactivation by pulsed electric fields, modeling of intracellular electroporation, electroporation in food processing, and electrotransfer-facilitated DNA vaccination.

Delivery Of Interleukin-15 To B16 Melanoma By Electroporation Leads To Tumor Regression And Long-Term Survival, Bernadette Marrero, Shawna Shirley, Richard Heller

Bioelectrics Publications

Electroporation (EP) is a method used to physically deliver therapeutic molecules such as plasmid DNA directly to tissues. It has been used safely and successfully in clinical studies and preclinical cancer models to deliver genes to a variety of tissues. In cancer research cytokine therapy is emerging as a promising tool that can be used to boost the host response to tumor antigens. The delivery of cytokines as recombinant proteins can result in toxicity and other adverse effects; however the delivery of cytokine genes using EP has been shown to be safe and effective. Interleukin 15 (IL-15) is a cytokine …

Temporal Modulation Of Plasma Species In Atmospheric Dielectric Barrier Discharges, Aijun Yang, Xiaohua Wang, Dingxin Liu, Mingzhe Rong, Michael G. Kong

Bioelectrics Publications

The atmospheric pressure dielectric barrier discharge in helium is a pulsed discharge in nature and the moment of maximum species densities is almost consistent with peak discharge current density. In this paper, a one-dimensional fluid model is used to investigate the temporal structure of plasma species in an atmospheric He-N₂ dielectric barrier discharge (DBD). It is demonstrated that there exist microsecond delays of the moments of the maximum electron and ion densities from the peak of discharge current density. These time delays are caused by a competition between the electron impact and Penning ionizations, modulated by the N_{2 …}

Dynamic Fracture Analysis Of Polycarbonate By The Optical Method Of Caustics, Guiyun Gao, Zheng Li, Mehrdad Negahban

Department of Mechanical and Materials Engineering: Faculty Publications

Glassy polycarbonate (PC) is a widely used engineering material in industries, since it has high strength and toughness as well as good transparency. However, these advantages of PC can be suppressed by physical aging, especially its dynamic fracture toughness. In addition, the material properties of PC can be changed dramatically after large plastic compressive deformation, and it can show obvious orthotropic behavior. Here, the combined effect of aging and plastic compressive deformation on dynamic facture of PC was investigated by the optical method of caustics. The dynamic reflective method of caustics for orthotropic materials was developed here to study the …

Quantitative Assessments Of Municipal Waste Management Systems: Using Different Indicators To Compare And Rank Programs In New York State, Krista L. Greene, David J. Tonjes

Technology & Society Faculty Publications

The primary objective of waste management technologies and policies in theUnited Statesis to reduce the harmful environmental impacts of waste, particularly those relating to energy consumption and climate change. Performance indicators are frequently used to evaluate the environmental quality of municipal waste systems, as well as to compare and rank programs relative to each other in terms of environmental performance. However, there currently is no consensus on the best indicator for performing these environmental evaluations. The purpose of this study is to examine the common performance indicators used to assess the environmental benefits of municipal waste systems to determine if …

A Review Of The Hyporheic Zone, Stream Restoration, And Means To Enhance Denitrification, Leanne Merill, David J. Tonjes

Technology & Society Faculty Publications

The hyporheic zone is the subsurface area below and adjacent to a stream where groundwater mixes with stream water, through vertical, lateral, and longitudinal flows. The hyporheic zone connects the stream to uplands and other terrestrial environments. It is a zone of distinct faunal communities, high biological diversity and ecological complexity, and is the site of chemical processing and transformations of ground- and stream waters. The hyporheic zone is important to the overall ecosystem ecology of the stream, and it can influence stream water chemistry. Flows, reactions, and biota in the hyporheic zone are heterogeneous and patchy, making it difficult …

Kentucky Water Resources Research Institute Annual Technical Report Fy 2013, Kentucky Water Resources Research Institute, University Of Kentucky

KWRRI Annual Technical Reports (USGS’s 104b Grant Program)

The FY 2013 Annual Technical Report for Kentucky consolidates reporting requirements of the Section 104(b) base grant award into a single document that includes: 1) a description of Kentucky Information Transfer activities, 2) citations for related publications, 3) a summary of student support during the reporting period, 4) notable awards and achievements during the year, and 5) publications from prior year projects.

No funds were requested for general program administration activities. However, travel funds were provided to support the participation of the Director and the Associate Director in the annual meeting of the National Institutes for Water Resources in Washington, …

A Tutorial On Learning Human Welder's Behavior: Sensing, Modeling, And Control, Y. K. Liu, W. J. Zhang, Yu Ming Zhang

Electrical and Computer Engineering Faculty Publications

Human welder's experiences and skills are critical for producing quality welds in manual GTAW process. Learning human welder's behavior can help develop next generation intelligent welding machines and train welders faster. In this tutorial paper, various aspects of mechanizing the welder's intelligence are surveyed, including sensing of the weld pool, modeling of the welder's adjustments and this model-based control approach. Specifically, different sensing methods of the weld pool are reviewed and a novel 3D vision-based sensing system developed at University of Kentucky is introduced. Characterization of the weld pool is performed and human intelligent model is constructed, including an extensive …

Engineering Behavior And Characterization Of Biomass Ashes Using Geotechnical Measurement Techniques, Francisco Javier Grau Sacoto

LSU Master's Theses

Biomass, the organic material derived from plants or animals in a biological process, has rapidly become a topic of worldwide interest. The need to find new types of renewable energy sources has led to the use of natural materials as an economic, sustainable and environmental alternative. Biomass can be used to produce biofuel after a conversion process. The combustion of biomass matter –which is mainly produced in industrial plants- becomes biomass ash, which contains macronutrients and micronutrients. Currently, the recycling potential is wasted and most of the biomass ash is dumped without control or just disposed in landfills. The main …

Ionizing Radiation Detection Using Microstructured Optical Fiber, Stanton Dehaven

Electrical & Computer Engineering Theses & Dissertations

Ionizing radiation detecting microstructured optical fibers are fabricated, modeled and experimentally measured for X-ray detection in the 10-40 keV energy range. These fibers operate by containing a scintillator material which emits visible light when exposed to ionizing radiation. An X-ray source characterized with a CdTe spectrometer is used to quantify the X-ray detection efficiency of the fibers. The solid state CdTe detector is considered 100% efficient in this energy range. A liquid filled microstructured optical fiber (MOF) is presented where numerical analysis and experimental observation leads to a geometric theory of photon transmission using total internal reflection. The model relates …

Detection Of Seagrass Scars Using Sparse Coding And Morphological Filter, Ender Oguslu, Sertan Erkanli, Victoria J. Hill, W. Paul Bissett, Richard C. Zimmerman, Jiang Li, Charles R. Bostater Jr. (Ed.), Stelios P. Mertikas (Ed.), Xavier Neyt (Ed.)

OES Faculty Publications

We present a two-step algorithm for the detection of seafloor propeller seagrass scars in shallow water using panchromatic images. The first step is to classify image pixels into scar and non-scar categories based on a sparse coding algorithm. The first step produces an initial scar map in which false positive scar pixels may be present. In the second step, local orientation of each detected scar pixel is computed using the morphological directional profile, which is defined as outputs of a directional filter with a varying orientation parameter. The profile is then utilized to eliminate false positives and generate the final …

An Unexpected Particle Oscillation For Electrophoresis In Viscoelastic Fluids Through A Microchannel Constriction, Xinyu Lu, Saurin Patel, Meng Zhang, Sang Woo Joo, Shizhi Qian, Amod Ogale, Xiangchun Xuan

Mechanical & Aerospace Engineering Faculty Publications

Electrophoresis plays an important role in many applications, which, however, has so far been extensively studied in Newtonian fluids only. This work presents the first experimental investigation of particle electrophoresis in viscoelastic polyethylene oxide (PEO) solutions through a microchannel constriction under pure DC electric fields. An oscillatory particle motion is observed in the constriction region, which is distinctly different from the particle behavior in a polymer-free Newtonian fluid. This stream-wise particle oscillation continues until a sufficient number of particles form a chain to pass through the constriction completely. It is speculated that such an unexpected particle oscillating phenomenon is a …

การลดสิ่งแปลกปลอมในกระบวนการสร้างเส้นลายวงจรในโรงงานผลิตแผงวงจรไฟฟ้าชนิดอ่อน, ปิยะนันท์ สยนานนท์

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อลดปริมาณของเสียที่เกิดจากปัญหาสิ่งแปลกปลอมในกระบวนการสร้างเส้นลายวงจรในโรงงานผลิตแผงวงจรไฟฟ้าชนิดอ่อน โดยการประยุกต์ใช้แนวคิด ซิกซ์ ซิกมา งานวิจัยเริ่มจากการนิยามปัญหาสิ่งแปลกปลอมในกระบวนการสร้างเส้นลายวงจร การวัดเพื่อกำหนดสาเหตุของปัญหาได้เลือกปัจจัยนำเข้าหลักมาพิสูจน์ความมีนัยสำคัญ การวิเคราะห์สาเหตุของปัญหาโดยการประยุกต์ใช้การออกแบบการทดลองเชิงแฟคทอเรียลแบบ 2 ระดับ (2k Factorial Design) เพื่อศึกษาอิทธิพลของปัจจัยที่มีผลต่อการทำให้เกิดของเสีย โดยพบว่ามี 3 ปัจจัยหลักที่เกี่ยวข้องกับของเสียที่เกิดขึ้น คือ ความเข้มของแสง UV ในกระบวนการถ่ายเส้นลายวงจร ความเข้มข้นของสารละลายโซเดียมไฮดรอกไซด์ และอุณหภูมิของสารละลายโซเดียมไฮดรอกไซด์ในกระบวนการลอกลายเส้นลายวงจร ซึ่งเมื่อทําการทดลองเพื่อหาระดับปัจจัย สรุปได้ว่าระดับของปัจจัยที่เหมาะสมในการลดปัญหาสิ่งแปลกปลอม คือ ความเข้มของแสง UV 50 mJ/cm2 ในกระบวนการถ่ายเส้นลายวงจร อุณหภูมิของสารละลายโซเดียมไฮดรอกไซด์ 48°C และ ความเข้มข้นของสารละลายโซเดียมไฮดรอกไซด์ 3.5%wt ในกระบวนการลอกลายเส้นลายวงจร จากนั้นจึงกำหนดแผนการควบคุมตัวแปรต่างๆ โดยจัดทำเป็นมาตรฐานวิธีการปฏิบัติงาน ผลหลังการปรับปรุงพบว่าค่าเฉลี่ยของเสียลดลงจาก 0.27% เหลือเพียง 0.004% โดยการประเมินปริมาณการผลิตคาดว่ามูลค่าความสูญเสียจะลดลงได้ถึง 336,770 บาทต่อเดือน

Static, Vibration Analysis And Sensitivity Analysis Of Stepped Beams Using Singularity Functions, Peng Cheng, Carla Davila, Gene Hou

Mechanical & Aerospace Engineering Faculty Publications

A systematic approach is presented in this paper to derive the analytical deflection function of a stepped beam using singularity functions. The discontinuities considered in this development are associated with the jumps in the flexural rigidity and the applied loads. This approach is applied to static and vibration analyses of stepped beams. The same approach is later extended to perform sensitivity analysis of stepped beams. This is done by directly differentiating the analytical deflection function with respect to any beam-related design variable. The particular design variable considered here is the location of discontinuity in flexural rigidity. Example problems are presented …

Student Reflections On Capstone Design: Experiences With Industry-Sponsored Projects, Judith Shaul Norback, Page F. Rhoad, Susannah Howe, Linda A. Riley

Engineering: Faculty Publications

Students are a primary stakeholder in engineering Capstone Design courses, but the student voice risks being overlooked in discussions of Capstone Design pedagogy and development. While many engineering programs collect student feedback and performance data for accreditation purposes, the engineering education and engineering design literature provide few resources that capture student perspectives on Capstone Design, especially across multiple institutions. The 2012 Capstone Design Conference hosted two well-attended panel sessions called ‘‘Student Reflections on Capstone Design’’ specifically to highlight student experiences in Capstone Design courses with industry-sponsored projects. Each panel featured four different panelists who had recently completed their Capstone Design …

Novel Technologies For The Detection And Mitigation Of Drowsy Driving, Samuel Lawoyin

Theses and Dissertations

In the human control of motor vehicles, there are situations regularly encountered wherein the vehicle operator becomes drowsy and fatigued due to the influence of long work days, long driving hours, or low amounts of sleep. Although various methods are currently proposed to detect drowsiness in the operator, they are either obtrusive, expensive, or otherwise impractical. The method of drowsy driving detection through the collection of Steering Wheel Movement (SWM) signals has become an important measure as it lends itself to accurate, effective, and cost-effective drowsiness detection. In this dissertation, novel technologies for drowsiness detection using Inertial Measurement Units (IMUs) …

Mobile Indoor Positioning For Augmented Reality Systems, Robert B. Glass

Theses and Dissertations

This thesis explores the creation and setup of a prototype that allows users of the device to interact within an indoor real world environment and a virtual environment simultaneously using high-tech common technology. The prototype is comprised of a small mobile device such as a cellular mobile phone, Raspberry Pi computer, a battery powered handheld Pico projector, and software developed for the Android OS. The software can easily be ported to other mobile and non-mobile operating systems. The mobile device must contain accelerometer, magnetometer, and gyroscope embedded sensors as well as 802.11 wireless network chip. The prototype software implements an …

Analysis And Modeling Of The Roles Of Actin-Myosin Interactions In Bladder Smooth Muscle Biomechanics, Seyed Omid Komariza

Theses and Dissertations

Muscle mechanical behavior potentially plays an important role in some of the most common bladder disorders. These include overactive bladder, which can involve involuntary contractions during bladder filling, and impaired contractility or underactive bladder, which may involve weak or incomplete contractions during voiding. Actin-myosin cross-bridges in detrusor smooth muscle (DSM) are responsible for contracting and emptying the bladder. The total tension produced by muscle is the sum of its preload and active tensions. Studies suggest that actin-myosin cross-links are involved in adjustable preload stiffness (APS), which is characterized by a preload tension curve that can be shifted along the length …

Dispatch, Delivery, And Location Logistics For The Aeromedical Evacuation Of Time-Sensitive Military Casualties Under Uncertainty, Benjamin Grannan

Theses and Dissertations

Effective aeromedical evacuation of casualties is one of the most important problems in military medical systems because high-priority casualties will not survive without timely medical care. The decision making process for aeromedical evacuation consists of the following components: (1) identifying which aeromedical evacuation asset (see figure 1) to dispatch to the casualty, (2) locating aeromedical evacuation assets strategically in anticipation of incoming demand, and (3) deciding which medical treatment facility to transport the casualty. These decisions are further complicated because prioritization of casualties is based on severity of injury while aeromedical evacuation assets and medical treatment facilities operate with varying …

Modeling Acute Changes In Bladder Wall Tension, Shape And Compliance During Filling, Firdaweke Habteyes

Theses and Dissertations

The bladder wall consists primarily of detrusor smooth muscle. Tension-sensitive nerves in the bladder wall are responsible for providing bladder fullness information that is interpreted as urgency. Bladder wall tension, and therefore nerve output, is a function of bladder volume, shape and material properties. Studies have shown that the bladder wall exhibits acutely regulated detrusor compliance. In addition, bladder shape throughout filling depends on intra-abdominal forces and material properties of the bladder wall, such as regulated detrusor compliance. This thesis focused on modeling the potential influence of acute changes in bladder compliance, shape and bladder wall tension during filling. Laplace’s …