Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2014

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 451 - 480 of 7238

Full-Text Articles in Engineering

Transformation Of Uranium In A Geological Environment, Derrell Hood Dec 2014

Transformation Of Uranium In A Geological Environment, Derrell Hood

All Theses

Incorporation of uranium into iron oxide minerals is a promising mechanism for the environmental immobilization of U(VI). In this study, synthesized hematite was doped with uranium and analyzed with SEM-EDS, TEM, XRD, and ICP-MS. The results of this analysis strongly indicate uranium incorporation into the mineral, as well as the possible presence of a co-precipitated uranium mineral clarkeite. Preliminary results also shows an increase in the amount of uranium associated with the hematite particles as a function of mineral aging. Cyclic Voltammetry (CV) was used to induce and characterize electrochemical changes of uranium in the doped hematite system; these changes …

Go to article

Optimizing Light Collection From Extractive Scintillating Resin In Flow-Cell Detectors, Amy Meldrum Dec 2014

Optimizing Light Collection From Extractive Scintillating Resin In Flow-Cell Detectors, Amy Meldrum

All Theses

The objectives of this study were to investigate the changes in light collection efficiency for flow cell detector as various parameters are altered to find the optimum flow cell configuration. Columns with inner diameters of 0.16 cm, 0.48 cm, 0.79 cm, and 1.11 cm were packed with synthesized nonporous, un-functionalized beads to measure their detection efficiencies for solutions containing 210Po, 14C, or 90Sr/90Y. The average diameter of the beads used in the experiments was 147 µm ± 33 µm. The highest detection efficiency for 210Po was 15.3 ± 3.9% with the 1.11 cm diameter column. The 1.11 cm diameter column …

Go to article

Thermo-Physical Property Models And Effect On Heat Pipe Modelling, Devakar Dhingra Dec 2014

Thermo-Physical Property Models And Effect On Heat Pipe Modelling, Devakar Dhingra

All Theses

Heat transfer devices find applications in various aspects of life. Be it residential, commercial or industrial application, efficient heat transfer is a challenge to all. Other than geometric design considerations and wick selection, the optimization of heat transfer in the heat pipe also depends on fluid selection. Heat pipe technology has proven to work efficiently with properly selected thermal fluid, from cryogenic temperatures to very high temperatures. Higher heat transfer ability through small temperature differences makes the heat pipe an efficient technology. Hence, it can be stated that selecting a proper working fluid enhances the heat transfer performance of a …

Go to article

Using Gis To Prioritize Green Infrastructure Installation Strategies In An Urban Watershed, Lauren Owen Dec 2014

Using Gis To Prioritize Green Infrastructure Installation Strategies In An Urban Watershed, Lauren Owen

All Theses

This study seeks to quantify runoff volume generation and peak flow rates from the urban Sand River Headwaters to determine the most effective placement of additional green infrastructure in Aiken, SC. ArcMap 10.1, HEC-GeoHMS, and HEC-HMS were used to delineate a total outlet watershed along with subwatershed(s) for urban stormwater infrastructure system by 'burning' the stormwater system at an artificial elevation below the existing topologically-based Digital Elevation Model (DEM). The result was a higher resolution DEM that allowed for storm routing and subsequent volume and flow predictions compared to that based on the original DEM created by using Light Detecting …

Go to article

Stochastic Wavenumber Estimation: Damage Detection Through Simulated Guide Lamb Waves, Garrison Stevens Dec 2014

Stochastic Wavenumber Estimation: Damage Detection Through Simulated Guide Lamb Waves, Garrison Stevens

All Theses

Structural Health Monitoring (SHM) is a field of research that seeks to identify the onset of damage in infrastructure systems such that catastrophic failures can be averted. Acoustic Wavenumber Spectroscopy (AWS) is an emerging SHM technique that can identify and locate change of thickness resulting from damage in thin plates through the estimation of the characteristic wavenumber. AWS measures the ultrasonically induced vibrations of thin plates by laser scanners and monitors the propagation of Rayleigh-Lamb waves through the structure. This method is particularly suitable for thin-walled structures such as those contained in pipes, airplanes, and wind turbine blades. While AWS …

Go to article

Fabrication And Characterization Of Magnetic Nanoparticle Composite Membranes, Akeem Cruickshank Dec 2014

Fabrication And Characterization Of Magnetic Nanoparticle Composite Membranes, Akeem Cruickshank

All Theses

To effectively and accurately deliver drugs within the human body, both new designs and components for implantable micropumps are being studied. Designs must ensure high biocompatibility, drug compatibility, accuracy and small power consumption. The focus of this thesis was to fabricate a prototype magnetic nanoparticle membrane for eventual incorporation into a biomedical pump and then determine the relationship between this membrane deflection and applied pneumatic or magnetic force. The magnetic nanoparticle polymer composite (MNPC) membranes in this study were composed of crosslinked polydimethylsiloxane (PDMS) and iron oxide nanoparticles (IONPs). An optimal iron oxide fabrication route was identified and particle size …

Go to article

A Device To Record Naturally Daily Wrist Motion, Surya Sharma Dec 2014

A Device To Record Naturally Daily Wrist Motion, Surya Sharma

All Theses

We introduce a new device to record and store wrist motion activity data. The motivation to create this device was the fact that this data can be used to detect periods of eating or the number of bites consumed. There is no similar device available in the market. This device uses new components that have been recently introduced to the market, and newer techniques that can be used for low quantity production. The production cost for this device was $52, similar to other fitness trackers on the market. The device was capable of recording wrist motion activity for 24 hours …

Go to article

Geotechnical Analysis Of The Foundation Of Fort Sumter National Monument Using Numerical Modeling, Daniel Kyser Dec 2014

Geotechnical Analysis Of The Foundation Of Fort Sumter National Monument Using Numerical Modeling, Daniel Kyser

All Theses

The foundational condition of the historical coastal fortification of Fort Sumter in Charleston, SC was analyzed though the use of numerical modeling. In this study, two-dimensional Finite Element (FE) analyses were conducted to assess the stability of the foundation-casemates-wall system in a coupled manner subjected to potential loadings such as ocean waves, storm surge and earthquake. The finite element model was verified by modeling the historical events (construction between 1820 and 1860, demolition due to artillery bombardment, reconstruction, earthquake, building of the Battery Huger, and the removal of fill from the parade ground) since the construction of the fort in …

Go to article

Characterizing Navigational Tools In A Virtual Search Task, Austin Riggs Dec 2014

Characterizing Navigational Tools In A Virtual Search Task, Austin Riggs

All Theses

The goal of this thesis is to characterize and empirically compare navigational tools in the context of a virtual inspection task. The framework considers both directional-cue navigational tools (e.g., GPS navigation arrows) and trail navigational tools (e.g.,footprints) in comparison to a control condition. Characterizing the tools allows for documented relationships between specific navigational tool-performance combinations. It is intended that by characterizing and comparing the tools a more advantageous use of navigational tools will emerge to increase the benefit provided to both the users and implementers of virtual environments. The focus of the metrics in the paper were distance traveled, speed …

Go to article

Combined Numberical And Experimental Assessment Of Steel Roof Decks Subjected To Windborne Debris, Robert Roper Dec 2014

Combined Numberical And Experimental Assessment Of Steel Roof Decks Subjected To Windborne Debris, Robert Roper

All Theses

In the summer of 2013, a steel roof deck manufacturer (Company A) approached Clemson University about testing their steel roof decking product to evaluate the performance of the steel roof deck to resist impact from tornado windborne debris using FEMA P-361 Design and Construction Guidance for Community Safe Rooms. To assist Company A in better serving their customers in areas prone to severe wind events and to facilitate use of their products in community safe rooms, debris impact tests were conducted on two cold-formed corrugated steel roof decking products. Community safe rooms are buildings that are constructed in accordance with …

Go to article

A Model Of The Diurnal Variation In Lake Surface Temperature, Jonathan L. Hodges Dec 2014

A Model Of The Diurnal Variation In Lake Surface Temperature, Jonathan L. Hodges

All Theses

Satellite measurements of water surface temperature can benefit several environmental ap-plications such as predictions of lake evaporation, meteorological forecasts, and predictions of lake overturning events, among others. However, limitations on the temporal resolution of satellite mea-surements restrict these improvements. A model of the diurnal variation in lake surface temperature could potentially increase the effective temporal resolution of satellite measurements of surface tem-perature, thereby enhancing the utility of these measurements in the above applications. Herein, a one-dimensional transient thermal model of a lake is used in combination with surface tempera-ture measurements from the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument aboard the …

Go to article

Retrieval Of Spectral Reflectance Of High Resolution Multispectral Imagery Acquired With An Autonomous Unmanned Aerial Vehicle: Aggieair™, Bushra Zaman, Austin Jensen, Shannon R. Clemens, Mac Mckee Dec 2014

Retrieval Of Spectral Reflectance Of High Resolution Multispectral Imagery Acquired With An Autonomous Unmanned Aerial Vehicle: Aggieair™, Bushra Zaman, Austin Jensen, Shannon R. Clemens, Mac Mckee

AggieAir Publications

This research presents a new semi-automatic model for converting raw AggieAir™ footprints in visible and near-infrared (NIR) bands into reflectance images. AggieAir, a new unmanned aerial vehicle (UAV) platform, is flown autonomously using pre-programmed flight plans at low altitudes to limit atmospheric effects. The UAV acquires high-resolution, multispectral images and has a flight duration of about 30 minutes. The sensors on board are twin cameras with duplicate settings and automatic mode disabled. A white Barium Sulfate (BaSO4) panel is used for reflectance calibration and in situ irradiance measurements. The spatial resolution of the imagery is 25 cm; the radiometric resolution …

Go to article

Steps Toward A Net-Zero Campus With Renewable Energy Resources, Andrew Clarke Dec 2014

Steps Toward A Net-Zero Campus With Renewable Energy Resources, Andrew Clarke

All Dissertations

With the increasing attention and support behind plug in hybrid electric vehicles, research must be conducted to examine the impacts of vehicles on electric distribution and transmission systems. This research aims first to model the behavior of vehicle battery chargers during system disturbances and mitigate any impacts. A distribution test system example is modeled and several different vehicle charger topologies are added. Faults are applied to the distribution system with vehicle chargers connected and the results are examined. Based on these results, a control strategy to mitigate their negative impacts is suggested. Photovoltaic panels are then added to the system …

Go to article

Experimental Evidence For Colloid-Facilitated Transport Of Plutonium, Hilary Emerson Dec 2014

Experimental Evidence For Colloid-Facilitated Transport Of Plutonium, Hilary Emerson

All Dissertations

Colloid-facilitated transport of the actinides has been observed previously in the field on the kilometer scale. The objective of this work is to investigate the mechanisms of colloid-facilitated transport with controlled settings and conditions. The experimental work in this dissertation investigates transport of a ternary complex with iron oxide colloids, organic ligands and actinides in the presence of quartz or a natural sandy soil as well as simplified systems building up to the ternary complexes. The first three papers investigate the following: (1) unsaturated transport of iron oxide colloids in a natural sandy soil lysimeter with and without natural organic …

Go to article

Effects Of Transportation Hazards On Package Performance And Food Product Shelf Life, Kyle Dunno Dec 2014

Effects Of Transportation Hazards On Package Performance And Food Product Shelf Life, Kyle Dunno

All Dissertations

This research studied the effect of transportation hazards on food product shelf life and package performance. Studies were conducted to determine the effect of package headspace volume, product viscosity and storage temperature on package integrity. Finally, accelerated shelf life testing (ASLT) was utilized to determine how simulated transportation hazards affected the shelf life of a specific food product. Institutional retort pouches containing either water or 5% starch solution were filled with varying amounts of headspace volume to determine if package headspace volume could aid in package performance during simulated engineering tests for packaged products. Fixed displacement vibration testing and compression …

Go to article

Toward Understanding The Thermodynamics And Mechanisms Of Actinide Sorption Reactions, Shanna Estes Dec 2014

Toward Understanding The Thermodynamics And Mechanisms Of Actinide Sorption Reactions, Shanna Estes

All Dissertations

The environmental fate of actinides is greatly influenced by interfacial reactions, including sorption onto solid surfaces. Because changes in the primary hydration sphere of the actinide are expected to greatly influence the thermodynamics (i.e., reaction enthalpy and entropy) of these reactions, examining actinide sorption thermodynamics may provide insight into actinide sorption mechanisms. Additionally, examining actinide sorption thermodynamics may enhance the ability to model or predict these reactions in environmental or engineered systems where variable or elevated temperatures are expected. However, few researchers have studied actinide sorption thermodynamics. Therefore, this research examined the thermodynamics of Eu(III) (a trivalent actinide analog), Th(IV), …

Go to article

Investigation Of Subgrid-Scale Mixing In Turbulent Plane Jets And Turbulent Jet Flames, Shuaishuai Liu Dec 2014

Investigation Of Subgrid-Scale Mixing In Turbulent Plane Jets And Turbulent Jet Flames, Shuaishuai Liu

All Dissertations

The subgrid-scale (SGS) mixing of mixture fraction, temperature, and species mass fraction in turbulent partially premixed (Sandia) flames is studied. We focus on the effects of the SGS mixing regimes and the spatial relationships among the scalars on the SGS mixing of the species mass fractions. High resolution lines images are used to obtain the scalar filtered mass density function and the conditionally filtered diffusion. The results show that for small SGS variance the scalar fields have a relatively simple structure. For large SGS variance the structure is more complex. The spatial relationships among the scalars result in different SGS …

Go to article

Nonequilibrium Transport Of Ionic Liquids In Electrified Nanosystems, Xikai Jiang Dec 2014

Nonequilibrium Transport Of Ionic Liquids In Electrified Nanosystems, Xikai Jiang

All Dissertations

Room-temperature ionic liquids (RTILs) are a promising class of electrolyte that are composed entirely of ions but are liquid at room temperature. Their remarkable properties such as wide electrochemical window make them ideal electrolytes in many electrochemical systems. Because the non-equilibrium transport of RTILs often determines the performance of these systems, a fundamental understanding of such transport is needed. Here, using molecular dynamic (MD) and continuum simulations, we investigated the non-equilibrium transport of RTILs in three scenarios relevant to the application of RTILs in electrochemical systems: the electroosmotic flow (EOF) of RTILs through nanochannels, the electrokinetic transport of RTILs through …

Go to article

Synthesis And Characterization Of Chemically Functionalized Shape Memory Nanofoams For Unattended Sensing Applications, Anna Paola Soliani Dec 2014

Synthesis And Characterization Of Chemically Functionalized Shape Memory Nanofoams For Unattended Sensing Applications, Anna Paola Soliani

All Dissertations

The work in this dissertation is devoted to the synthesis and characterization of novel materials for off-line unattended sensing: shape-memory grafted nanofoams. The fabrication process and characterization of highly efficient, polymeric nanosensor element with the ability to selectively detect analytes and retain memory of specific exposure events is reported. These shape memory nanofoams could potentially act as efficient and highly sensitive coatings for evanescent waveguide-based optical monitoring systems. On exposure to specific analytes, the polymeric coatings locally change their internal structure irreversibly at the nanolevel, affecting the local optical properties such as refractive index. Currently, enrichment polymer layers (EPLs) are …

Go to article

Autonomous Control And Automotive Simulator Based Driver Training Methodologies For Vehicle Run-Off-Road And Recovery Events, Paul Freeman Dec 2014

Autonomous Control And Automotive Simulator Based Driver Training Methodologies For Vehicle Run-Off-Road And Recovery Events, Paul Freeman

All Dissertations

Traffic fatalities and injuries continue to demand the attention of researchers and governments across the world as they remain significant factors in public health and safety. Enhanced legislature along with vehicle and roadway technology has helped to reduce the impact of traffic crashes in many scenarios. However, one specifically troublesome area of traffic safety, which persists, is run-off-road (ROR) where a vehicle's wheels leave the paved portion of the roadway and begin traveling on the shoulder or side of the road. Large percentages of fatal and injury traffic crashes are attributable to ROR. One of the most critical reasons why …

Go to article

Particle Scavenging By Water Drops In An Ultrasonic Standing Wave Field, Weiyu Ran Dec 2014

Particle Scavenging By Water Drops In An Ultrasonic Standing Wave Field, Weiyu Ran

All Dissertations

Currently the backbone of the world's energy supply is composed of fossil fuels. However, the combustion of fossil fuels results in the production of enormous quantities of particulate pollutants. The smog resulting from these particulate pollutants causes significant health problem for city dwellers. Wet scrubbers, which use a water spray to scavenge airborne particles, is one of the most widely used devices to control particulate pollutants. Typical wet scrubbers can scavenge particles with diameters bigger than 10 um, but it is inefficient in scavenging particles with diameters on the order of 1 um. Unfortunately these fine particles are more dangerous …

Go to article

Studies Of Imbalance Difference Theory In Modeling Conversion Between Differential Mode And Common Mode Signals, Li Niu Dec 2014

Studies Of Imbalance Difference Theory In Modeling Conversion Between Differential Mode And Common Mode Signals, Li Niu

All Dissertations

This dissertation describes three related studies regarding the imbalance difference theory in modeling the conversion between differential mode and common mode/antenna mode signals. The topics covered are: rigorous derivation of imbalance difference theory for modeling radiated emission problems, modeling the conversion between differential mode and common mode propagation in transmission lines, and modeling the loading impedance on differential mode signals due to radiated emissions. The imbalance difference theory describes a method for calculating the coupling between differential mode signals and common mode signals due to changes in electrical balance on a transmission line. It provides both physical insight and a …

Go to article

High Frequency Devices And Circuit Modules For Biochemical Microsystems, Jiwei Sun Dec 2014

High Frequency Devices And Circuit Modules For Biochemical Microsystems, Jiwei Sun

All Dissertations

This dissertation investigates high frequency devices and circuit modules for biochemical microsystems. These modules are designed towards replacing external bulky laboratory instruments and integrating with biochemical microsystems to generate and analyze signals in frequency and time domain. The first is a charge pump circuit with modified triple well diodes, which is used as an on-chip power supply. The second is an on-chip pulse generation circuit to generate high voltage short pulses. It includes a pulse-forming-line (PFL) based pulse generation circuit, a Marx generator and a Blumlein generator. The third is a six-port circuit based on four quadrature hybrids with 2.0~6.0 …

Go to article

A Comprehensive Assessment Methodology Based On Life Cycle Analysis For On-Board Photovoltaic Solar Modules In Vehicles, Mahmoud Abdelhamid Dec 2014

A Comprehensive Assessment Methodology Based On Life Cycle Analysis For On-Board Photovoltaic Solar Modules In Vehicles, Mahmoud Abdelhamid

All Dissertations

This dissertation presents a novel comprehensive assessment methodology for using on-board photovoltaic (PV) solar technologies in vehicle applications. A well-to-wheels life cycle analysis based on a unique energy, greenhouse gas (GHG) emission, and economic perspective is carried out in the context of meeting corporate average fuel economy (CAFE) standards through 2025 along with providing an alternative energy path for the purpose of sustainable transportation. The study includes 14 different vehicles, 3 different travel patterns, in 12 U.S. states and 16 nations using 19 different cost analysis scenarios for determining the challenges and benefits of using on-board photovoltaic (PV) solar technologies …

Go to article

The Development And Characterization Of Tannic Acid Cross-Linked Collagen Scaffolds For The Prevention Of Breast Cancer Recurrence In Lumpectomy Patients, Beau Inskeep Dec 2014

The Development And Characterization Of Tannic Acid Cross-Linked Collagen Scaffolds For The Prevention Of Breast Cancer Recurrence In Lumpectomy Patients, Beau Inskeep

All Dissertations

Breast cancer is the second most common cancer amongst women, second only to lung cancer. In 2014, it was estimated that there were approximately 295,000 new cases of breast cancer diagnosed in women, with approximately 40,000 deaths caused by breast cancer in the United States. It has been reported that a woman has a 12% chance of developing breast cancer in her lifetime and a 3% chance of dying from breast cancer. There are several treatment options available for breast cancer, including chemotherapy, radiation therapy, as well as two different forms of surgery, mastectomy and lumpectomy. However, none of these …

Go to article

Thermally Responsive Polymer Electrolytes For Inherently Safe Electrochemical Energy Storage, Jesse Kelly Dec 2014

Thermally Responsive Polymer Electrolytes For Inherently Safe Electrochemical Energy Storage, Jesse Kelly

All Dissertations

Electrochemical double layer capacitors (EDLCs), supercapacitors and Li-ion batteries have emerged as premier candidates to meet the rising demands in energy storage; however, such systems are limited by thermal hazards, thermal runaway, fires and explosions, all of which become increasingly more dangerous in large-format devices. To prevent such scenarios, thermally-responsive polymer electrolytes (RPEs) that alter properties in electrochemical energy storage devices were designed and tested. These RPEs will be used to limit or halt device operation when temperatures increase beyond a predetermined threshold, therefore limiting further heating. The development of these responsive systems will offer an inherent safety mechanism in …

Go to article

Development Of An In Vitro Three-Dimensional Breast Tissue Model To Decipher The Effects Of Stromal Heterogeneity On Normal And Cancerous Mammary Epithelial Cells, Erin Mccave Dec 2014

Development Of An In Vitro Three-Dimensional Breast Tissue Model To Decipher The Effects Of Stromal Heterogeneity On Normal And Cancerous Mammary Epithelial Cells, Erin Mccave

All Dissertations

A goal of breast cancer research is to develop a detailed understanding of the underlying mechanisms of disease progression and to generate approaches to improve early detection, monitoring, and treatment of breast cancerous lesions. Current breast cancer therapies are not successful for all cases as they were developed as a standard of care for 'average' breast cancer condition. To further current clinical success, the characteristics of each tumor mass must be considered. Such an individualized or personalized approach is incompatible with current understanding of 'average' breast cancer tumors and responses to treatments. The long-term objective of the present research is …

Go to article

Thermo-Mechanical Characterization Of Glass And Its Effect On Predictions Of Stress State, Birefringence And Fracture In Precision Glass Molded Lenses, Dhananjay Joshi Dec 2014

Thermo-Mechanical Characterization Of Glass And Its Effect On Predictions Of Stress State, Birefringence And Fracture In Precision Glass Molded Lenses, Dhananjay Joshi

All Dissertations

The Precision Glass Molding (PGM) process was established as an economical and sustainable option for the production of aspherical glass optics to satisfy the increased industrial demand. Applications of precision molded aspherical lenses range from consumer electronics products such as cell phone cameras to defense and medical systems. An aspherical lens can eliminate the spherical and optical aberrations as compared to a spherical lens thus making the lens system more compact and lighter. In spite of being a clean and environmentally friendly process, the lens molding operation suffers from a few drawbacks such as lens profile deviation, stress birefringence/refractive index …

Go to article

Modeling Sustainability In Renewable Energy Supply Chain Systems, Fei Xie Dec 2014

Modeling Sustainability In Renewable Energy Supply Chain Systems, Fei Xie

All Dissertations

This dissertation aims at modeling sustainability of renewable fuel supply chain systems against emerging challenges. In particular, the dissertation focuses on the biofuel supply chain system design, and manages to develop advanced modeling framework and corresponding solution methods in tackling challenges in sustaining biofuel supply chain systems. These challenges include: (1) to integrate 'environmental thinking' into the long-term biofuel supply chain planning; (2) to adopt multimodal transportation to mitigate seasonality in biofuel supply chain operations; (3) to provide strategies in hedging against uncertainty from conversion technology; and (4) to develop methodologies in long-term sequential planning of the biofuel supply chain …

Go to article

Me-Em Enewsbrief, December 2014, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University Dec 2014

Me-Em Enewsbrief, December 2014, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Go to article

First Prev Next Last