Engineering Commons^™

Piezoelectric Powered Led Street Reflector, Collin Shane Douglass

Electrical Engineering

In many areas of Washington, it rains for a majority of the year. During rainy weather it becomes difficult to see street lanes and dividers, causing hazardous road conditions. The Piezoelectric Powered LED Street Reflector solves this problem. The PPL Street Reflector modifies a street reflector with LED lights. These lights help drivers clearly see where dividers and street lines are in non-ideal weather conditions, such as rain, fog, and snow. The PPL Street Reflector capabilities include harvesting energy through the Piezoelectric Effect, creating a self-sustaining device with minimal maintenance.

Portable Nano Hydro Generator For The Dc House Project, Caleb David Fink, Victor Olusoji Ojewole, Christopher Mapua Tan

Electrical Engineering

This Senior Project entails the design and testing processes of the Portable Nano Hydro Generator for the continuing DC House Project. No natural resources should go unused, especially in developing countries where they are found in abundance. Small streams in particular have potential to further Professor Taufik's DC House Project that will provide electricity to 1.6 billion people in the world without access to electricity upon completion. The goal of this project is to create a small portable generator that utilizes the discharge from small streams and convert it into useable electricity that could charge a car battery as an …

Protection System For The Energy Harvesting From Exercise Machines (Ehfem) Project, Eric Funsten, Cameron Kiddoo

Electrical Engineering

The goal of the Energy Harvesting from Exercise Machines (EHFEM) project seeks to harness the energy generated by people using exercise machines and deliver this energy to the electric grid [1]. The implementation consists of a protection system, DC-DC converter, and an inverter. This project involves redesigning the existing DC-DC input protection circuit and current limiter for the EHFEM project [2]. The DC-DC converter takes in the power from the exercise machines and converts it to a manageable voltage level for the inverter. Due to a problem where the inverter may overload the converter, a current limiter sets to limit …

Bike Safe: An Automatic Turn Signal System, Betty He Chan, Ricardo Alberto Duran

Electrical Engineering

Bicycles are vehicles that do not require a license to operate and share the road with cars, motorcycles, and other fast moving vehicles. An improper lane change from a bicyclist, such as one without any warning, can lead to great injury or death (especially after sundown). Bike Safe addresses this safety concern by providing a low-cost device that mimics the warning system motorists’ use every day. The system consists of a red brake light and amber turning signal lights that mounts to the rear of the bike, as well as a white headlamp that mounts to the front handlebars. The …

All Purpose Mobile Gps, James C. Smith, Matt Weege, Kevin Peters

Electrical Engineering

The aim of the All Purpose Mobile GPS (The System) is to create a GPS tracking device that can accurately record location and calculate velocity, distance traveled and elevation change even when the satellite signal is lost. This data can later overlay on existing internet-based maps illustrating a trip to oneself or others. The portable tracker consumes very little power achieving several days’ worth of power in a single charge. A solar cell provides a quick battery boost in a pinch. SD Card storage increases compatibility with computers and other forms of data transfer. Data processing, such as viewing the …

Power System Fault Detection Using The Discrete Wavelet Transform And Artificial Neural Networks, Kevin Keegan

Electrical Engineering

This project focuses on detecting various phase to ground faults in three phase power systems. In this research, the faults are generated using a power distribution system simulator; and the three phase voltage waveforms are analyzed using the discrete wavelet transform. Multi-layer feed forward neural networks are employed for fault detection and classification. The effectiveness of this approach is demonstrated by computer simulation results.

Smart Weights, Luke W. Rafla-Yuan, Austin C. Fox

Electrical Engineering

The goal of this project is to design and implement weights which can record and analyze work out patterns. Motivation for this project stems from the high cost of personal training. The hope is that this device will provide many of the benefits a user receives from personal training at only a fraction of the cost. The Smart Weight is designed with an on-board Inertial Measurement Unit providing acceleration, gyroscope, and magnetometer data. A microcontroller records and analyzes changes in motion, feeding this data into Multiplicative Recurrent Neural Network (MRNN) for exercise classification. A Raspberry Pi was chosen as the …

Design Improvement For The Smart Dc Wall Plug, Cory Yee, Haoyan Huang

Electrical Engineering

The DC smart wall plug is a subsystem within the Cal Poly DC House Project. The previous version faces challenges supplying DC voltage to meet household appliances’ nominal values. Specifically, it can only output the minimum required voltage for DC appliances to operate, resulting in unwanted power loss. In addition, the maximum output voltage is rated at 15V, which is insufficient to power most DC appliances. This design improvement project incorporates NFC technology as a solution to overcome the power loss and a new buck converter configuration to increase the output voltage range. Additionally, the new design introduces short-circuit and …

Energy Harvesting From Exercise Machines - Dc-Dc Buck Boost Converter (Lt3791), Matthew B. Wong

Electrical Engineering

Cal Poly’s ongoing Energy Harvesting From Exercise Machines (EHFEM) project proposes sustainability and energy saving costs through modifying exercise machines generating DC power, providing a renewable energy resource through physical exercise. The EHFEM project contains multiple sub-projects involving modifying several different exercise machines. Each machine generates DC power and an inverter converts this power to AC. This AC power returns to the grid. This project addresses an issue involving a previously installed DC-DC converter not returning power properly. When generating DC power, the grid demands a specific AC voltage, but the generated power through the previous DC-DC converter and power …

Ad-Hoc Hid: Modular Wireless Human Interface Device, Joseph A. Mazzanti

Electrical Engineering

Ad-Hoc HID is a modular, reprogrammable Human Interface Device. This device is intended to function as a keyboard, gamepad, or mouse, according to the user's needs. The final project is intended to be switch agnostic, making the final product adaptable to the user’s needs.

Wideband Balun Design With Ferrite Cores, Paul R. Biggins

Electrical Engineering

This project explores different balun devices in order to develop a balanced to unbalanced transformer that will operate over a wide bandwidth. The balun must operate from at least 1 MHz (or below) to the highest possible frequency. It must have an insertion loss of less than 1 dB under the ideal case with an imbalance of less than 1 dB and 2.5 degrees. Three balun topologies were tested, each built for a 1:1 impedance transformation ratio. Techniques of measuring each balun topology were investigated including gathering accurate data from a three port device with two port instruments and measuring …

Team Omnimouse, Derek J. Halman, Josh B. Porter, Steven A. Silver, Ian S. Stemper

Computer Engineering

INFORMATION, DATA, FIGURES AND DRAWINGS EMBODIED IN THIS DOCUMENT ARE STRICTLY CONFIDENTIAL AND ARE SUPPLIED ON THE UNDERSTANDING THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT THE PRIOR WRITTEN CONSENT OF QUALITY OF LIFE PLUS.

Laser Tag - An Application Of Infrared Communication, Michael J. Altschuler, Michael B. Peterson, Elmer Pres Ventura Urbano

Computer Engineering

The purpose of this project is to design, build, and test laser tag system from the ground up. Much of the laser tag equipment that is available on the market right now use infrared technology to track and register “hits” between players. Our goal is to take this system and redesign it to shoot farther, be more energy efficient, and make it cheaper to produce.

Ecs Game Engine Design, Daniel Masamune Hall

Computer Engineering

Game programming design and organization can be difficult and complicated. To simplify the development process, frameworks with an array of tools and utilities known as game engines are used. The main goal of this project is to explore game engine designs and develop a design for a modular and expandable game engine. The designs covered in this paper are Object Oriented Programing (OOP) and two Entity Component System (ECS). OOP designs, commonly used in computer science, use a hierarchy of objects to share functionality. ECS designs are based off of the concepts Composition over inheritance in which objects contain features …

Cnc Torch, Steven Chiu

Computer Engineering

This CNC Torch cuts steel plate. It can cut up to a maximum area of 3x3 feet. The user builds a cut list on the touchscreen from a selection of predefined shapes and enters the parameters need for each shape. When the user is ready, the cut list is sent to an Arduino that will move each motors accordingly to the shapes desired.

Web Based Tactical Role Playing Game In Javascript, David Cilva, Paul Doyle, Stephen Hill, Rachel Judish

Computer Science and Software Engineering

The goal of this senior project was to develop a web­based game that emphasized narrative through gameplay within the context of a tactical RPG gameplay style. As the project developed, emphasis shifted from narrative to refining gameplay and making decisions within gameplay meaningful and satisfying. The project elaborates on the standard tactical RPG combat system, incorporating mechanics and ideas from various other games. This was done in order to make the play feel challenging and rewarding as well as to avoid some of the pitfalls that bog down existing games in this genre. Since work was concentrated on building the …

Characterizing The Reproducibility Of The Properties Of Electrospun Poly(D, L-Lactide-Co-Glycolide) Scaffolds For Tissue-Engineered Blood Vessel Mimics, Toni M. Pipes

Master's Theses

“Blood vessel mimics” (BVMs) are tissue-engineered constructs that serve as in vitro preclinical testing models for intravascular devices. The Cal Poly Tissue Engineering lab specifically uses BVMs to test the cellular response to stent implantation. PLGA scaffolds are electrospun in-house using the current “Standard Protocol” and used as the framework for these constructs. The performance of BVMs greatly depends on material and mechanical properties of the scaffolds. It is desirable to create BVMs with reproducible properties so that they can be consistent models that ultimately generate more reliable results for intravascular device testing. Reproducibility stems from the consistency of the …

Predicting The Dynamic Fracture Of Steel Via A Non-Local Strain-Energy Density Failure Criterion, Kevin D Schrum, Dean L. Sicking, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

No abstract provided.

Development Of A Mash Tl-3 Transition Between Guardrail And Portable Concrete Barriers, Robert W. Bielenberg, Ronald K. Faller, Karla A. Lechtenberg, David A. Gutierrez, John D. Reid

Nebraska Department of Transportation: Research Reports

No abstract provided.

Flight Testing Small Uavs For Aerodynamic Parameter Estimation, Adam Thomas Chase

Master's Theses

A flight data acquisition system was developed to aid unmanned vehicle designers in verifying the vehicle's design performance. The system is reconfigurable and allows the designer to choose the correct combination of complexity, risk, and cost for a given flight test. The designer can also reconfigure the system to meet packaging and integration requirements. System functionality, repeatbility, and accuracy was validated by collecting data during multiple flights of a radio-controlled aircraft. Future work includes sensor fusion, thrust prediction methods, stability and control derivative estimation, and growing Cal Poly's small-scale component aerodynamic database.

Reduced-Order Reference Models For Adaptive Control Of Space Structures, Alexander I. Scherling

Master's Theses

In addition to serving as a brief overview of aspects relevant to reduced-order modeling (in particular balanced-state and modal techniques) as applied to structural finite element models, this work produced tools for visualizing the relationship between the modes of a model and the states of its balanced representation.

Specifically, error contour and mean error plots were developed that provide a designer with frequency response information absent from a typical analysis of a balanced model via its Hankel singular values. The plots were then used to analyze the controllability and observability aspects of finite element models of an illustrative system from …

Optimization Of Growth Parameters For Algal Regrowth Potential Experiments, Chadwick D. Boggess

Master's Theses

Water cost is one of the key deterrents in making algal biofuels a feasible alternative to traditional petroleum fuels. Research into recycling of algal media was conducted in a laboratory setting at the California Polytechnic State University in San Luis Obispo. A growth assay was created to allow for algal cultures, specifically Ward’s Chlorella sp., to proliferate in sealed culture vessels. Bold’s Basal Medium (BBM) was selected as the media due to its extensive use with freshwater algal strains. However, this medium can limit algal growth through nutrient limitation and it became necessary to augment the original recipe. 50mM …

Variable Precision Tandem Analog-To-Digital Converter (Adc), Colton A. Parsons

Master's Theses

This paper describes an analog-to-digital signal converter which varies its precision as a function of input slew rate (maximum signal rate of change), in order to best follow the input in real time. It uses Flash and Successive Approximation (SAR) conversion techniques in sequence.

As part of the design, the concept of "total real-time optimization" is explored, where any delay at all is treated as an error (Error = Delay * Signal Slew Rate). This error metric is proposed for use in digital control systems. The ADC uses a 4-bit Flash converter in tandem with SAR logic that has variable …

The Effect Of Pretreatment Methods On Methane Yield And Nutrient Solubilization During Anaerobic Digestion Of Microalgae, Alexander Scott Hill

Master's Theses

Microalgal biomass is a candidate feedstock for biofuel production. To improve the sustainability of algae biofuel production, following biofuel recovery, the biomass nutrients should be recycled for additional algae growth. Anaerobic digestion of algae or oil-extracted algae is a means of recovering carbon and other nutrients, while offsetting algae production electricity demand. The major limiting factor in microalgae digestion is the low biodegradability of the cell walls. In the present study, various pretreatment technologies were tested at bench scale for their ability to improve raw, non-lipid-extracted algae biodegradability, which was assessed in terms of methane yield, volatile solids destruction, and …

Mos Current Mode Logic (Mcml) Analysis For Quiet Digital Circuitry And Creation Of A Standard Cell Library For Reducing The Development Time Of Mixed Signal Chips, David Marusiak

Master's Theses

Many modern digital systems use forms of CMOS logical implementation due to the straight forward design nature of CMOS logic and minimal device area since CMOS uses fewer transistors than other logic families. To achieve high-performance requirements in mixed-signal chip development and quiet, noiseless circuitry, this thesis provides an alternative toCMOSin the form of MOS Current Mode Logic (MCML). MCML dissipates constant current and does not produce noise during value changing in a circuit CMOS circuits do. CMOS logical networks switch during clock ticks and with every device switching, noise is created on the supply and ground to deal with …

Me-Em Enewsbrief, June 2014, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Overtime Traffic Enforcement Evaluation: A Methodology For Selecting Agencies And Enforcement Periods, Dario Enrique Romero Santana

Masters Theses

Multiple studies have stated the advantages of police traffic enforcement on crash reduction (Zaidel, February 2002). It is very important to identify locations and time periods where police enforcement produces the greatest crash reductions. The objectives of this study were to: (1) determine the impact of overtime traffic enforcement on crash occurrence; (2) develop procedures to identify police agencies with potential to reduce targeted crashes; and (3) develop procedures to identify additional time periods in which enforcement activities should be conducted. In order to accomplish these objectives, many methodologies were explored. The study used crash and enforcement data collected by …

Assessing Customer Service In Airports – Models From The Uae, Aman Gupta, Mohammed Arif, Phillip A. Richardson

International Journal of Aviation, Aeronautics, and Aerospace

Customer service at airports has become a key priority for airport operators given the high degree of competitions. This paper uses an airport customer service model to analyze three examples from the United Arab Emirates (UAE). Passenger interviews, statistical information, customer feedback and other forms of information have been utilized to learn more about the customer view on the quality of service offered at these three airports. Detailed qualitative analysis of these case studies has highlighted some key issues in the area of customer service and identifies some opportunities for improvement.

Opportunistic Service Differentiation And Cloud Resource Management In Support Of Enhanced Vehicular Applications, Mohammad Ali Salahuddin

Dissertations

An integral part of Intelligent Transportation Systems (ITS) are Vehicular Ad hoc Networks (VANETs), which consist of vehicles with on-board units (OBUs) and fixed road-side units (RSUs). Wireless Access in Vehicular Environment (WAVE) offers QoS via service differentiation by using application defined priorities. However, WAVE has unbounded delay and is oblivious to network load and severity of vehicles with respect to their environment. Our context severity metric innovatively enhances WAVE to be sensitive to vehicle and environment interactions. Our novel Opportunistic Service Differentiation (OSD) technique, dynamically readjusts the WAVE packet priorities to improve utilization of lower latency queues, prioritizing packets …

Toward Automating Web Protocol Configuration For A Programmable Logic Controller Emulator, Deanna R. Fink

Theses and Dissertations

Industrial Control Systems (ICS) remain vulnerable through attack vectors that exist within programmable logic controllers (PLC). PLC emulators used as honeypots can provide insight into these vulnerabilities. Honeypots can sometimes deter attackers from real devices and log activity. A variety of PLC emulators exist, but require manual figuration to change their PLC pro le. This limits their flexibility for deployment. An automated process for configuring PLC emulators can open the door for emulation of many types of PLCs. This study investigates the feasibility of creating such a process. The research creates an automated process for figuring the web protocols of …