Engineering Commons^™

Effect Of Lowest Instrumented Vertebra On Trunk Mobility In Patients With Adolescent Idiopathic Scoliosis Undergoing A Posterior Spinal Fusion, Ubong I. Udoekwere, Joseph Krzak, Adam Graf, Sahar Hassani, Sergey Tarima, Mary Riordan, Peter F. Sturm, Kim W. Hammerberg, Purnendu Gupta, Alireza K. Anissipour, Gerald F. Harris

Biomedical Engineering Faculty Research and Publications

Study Design

Prospective.

Objectives

The goal of this study was to evaluate the effect of posterior spinal fusion surgery terminating at different lowest instrumented vertebrae (LIV) on trunk mobility in individuals with adolescent idiopathic scoliosis (AIS).

Summary of Background Data

Posterior spinal fusion with instrumentation is the standard surgical technique employed in AIS for correcting spine deformities with Cobb angles exceeding 50°. Surgical correction of curve deformity reduces trunk mobility and range of motion. However, conflicting findings from previous studies investigating the impact of different LIV levels on the reduction in trunk mobility after surgery have been reported.

Methods

The …

El-Ifying Ontologies, David Carral, Cristina Feier, Bernardo Cuenca Grau, Pascal Hitzler, Ian Horrocks

Computer Science and Engineering Faculty Publications

The OWL 2 profiles are fragments of the ontology language OWL 2 for which standard reasoning tasks are feasible in polynomial time. Many OWL ontologies, however, contain a typically small number of out-of-profile axioms, which may have little or no influence on reasoning outcomes. We investigate techniques for rewriting axioms into the EL and RL profiles of OWL 2. We have tested our techniques on both classification and data reasoning tasks with encouraging results.

Determination Of A Predictive Stiffness Model For A 1 Dof Human Inspired Robotic Joint, Michael Boyarsky

Master's Theses (2009 -)

In order to facilitate more natural and intuitive interaction for human users, robots need to move in a more human-like manner as compared to current robots. This change would enable humans to better anticipate robot movements (which would allow humans to better avoid collisions if necessary) and also improve safety in the context of a collision between a robot and a human. The goal of this thesis was to analyze experimental data of human motion to gain an understanding of how human motion and robot motion differ. From this understanding, a neuro-motor model (NMM) of a human elbow (previously established …

Characterization Of Genetically Modified High Biomass Producing Tobacco Plant, Pankaj Singh Kuhar

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

Global warming and peak oil has clouded our energy security. In light of this situation, bioethanol as emerged as one of the most amenable solutions to the problem. However bioethanol has its own shortcomings and transgenics seem imperative to exploit its full potential. A high biomass producing line in transgenic tobacco (Nicotiana tabacum cv. Xanthi) was identified during a routine genetic transformation, termed giant recombinant (GR). To characterize the phenotype of the giant line, growth rate and lignocellulosic composition was analyzed relative to the non-transgenic control line. The GR line accounted for 240% more biomass than the untransformed line …

Injection Locking Of Spin-Torque Nano-Oscillators, Chong Long Cao, Yan Zhou, Lijun Jiang, Philip W.T. Pong

Electrical and Computer Engineering Faculty Research & Creative Works

We demonstrated the phase locking of a spin-torque oscillator (STO) to an alternating current (ac) using macrospin and micromagnetic simulations. We found that the locking properties of both approaches agree with each other. The phase difference between the STO and the injected ac stabilizes at Δφ ≈ 90° and is not sensitive to the initial phase difference, which provides potential application of STO for microwave generation.

State-Of-The-Art Of Metamaterials: Characterization, Realization And Applications, Giuseppe Ruvio, Giovanni Leone

Articles

Metamaterials is a large family of microwave structures that produces interesting ε and μ conditions with huge implications for numerous electromagnetic applications. Following a description of modern techniques to realize epsilon-negative, mu-negative and double-negative metamaterials, this paper explores recent literature on the use of metamaterials in hot research areas such as metamaterial-inspired microwave components, antenna applications and imaging. This contribution is meant to provide an updated overview of complex microwave engineering for the generation of different types of metamaterials and their application in topical electromagnetic scenarios.

Development Of A Socketed Foundation For The Midwest Weak Post V1, Ronald K. Faller, Dean L. Sicking, Scott Rosenbaugh, John D. Reid, Tyler L. Schmidt

Nebraska Department of Transportation: Research Reports

A socketed foundation was designed and evaluated for use with the Midwest Weak Post (MWP), Version 1. Dynamic component testing was conducted on five different design configurations with varying embedment depths, steel reinforcement, and soil conditions. The low strength of the MWPs limited the force transferred into the foundations and prevented damage in the form of concrete cracking or fracture. Additionally, the lateral movements of the socketed foundations were all within the 1-in. (25-mm) limit established to ensure reuse of the foundations without resetting. The selected design consisted of a 12-in. (305-mm) diameter concrete shaft reinforced with four vertical bars …

Improved Sonothrombolysis From A Modified Diagnostic Transducer Delivering Impulses Containing A Longer Pulse Duration, J. Wu, X. Feng, T. Kumar, J. Liu, J. Lof, W. Shi, E. Carr Everbach, T. R. Porter

Engineering Faculty Works

Although guided high-mechanical-index (MI) impulses from a diagnostic ultrasound transducer have been used in preclinical studies to dissolve coronary arterial and microvascular thrombi in the presence of intravenously infused microbubbles, it is possible that pulse durations (PDs) longer than that used for diagnostic imaging may further improve the effectiveness of this approach. By use of an established in vitro model flow system, a total of 90 occlusive porcine arterial thrombi (thrombus age: 3-4 h) within a vascular mimicking system were randomized to 10-min treatments with two different PDs (5 and 20 mu s) using a Philips S5-1 transducer (1.6-MHz center …

Asynchronous Advanced Encryption Standard Hardware With Random Noise Injection For Improved Side-Channel Attack Resistance, Siva Pavan Kumar Kotipalli, Yong-Bin Kim, Minsu Choi

Electrical and Computer Engineering Faculty Research & Creative Works

This work presents the design, hardware implementation, and performance analysis of novel asynchronous AES (advanced encryption standard) Key Expander and Round Function, which offer increased side-channel attack (SCA) resistance. These designs are based on a delay-insensitive (DI) logic paradigm known as null convention logic (NCL), which supports useful properties for resisting SCAs including dual-rail encoding, clock-free operation, and monotonic transitions. Potential benefits include reduced and more uniform switching activities and reduced signal-to-noise (SNR) ratio. A novel method to further augment NCL AES hardware with random voltage scaling technique is also presented for additional security. Thereby, the proposed components leak significantly …

Affluent Populations And Their Effect On Biological Diversity Through The Consumption Of Meat, Electronics, And Motor Vehicles, Melody Flores

Honors College Theses

The human has caused a far greater impact on the planet's biodiversity than any other species in existence, due to the impact of population, afflluence, and technology. This thesis will argue the importance of biological diversity and how affluent populations are reducing biodiversity through the consumption of meat, electronics, and motor vehicles. Aldo Leopold's "The Land Ethic" and Herman Daly's "The Impossibility Theorem", among others, create a rubric evaluating human activities and provide alternative views on economic impossibilities. Consumption is reviewed from an ecocentric perspective, a holistic outlook placing emphasis on the ecosystem. The reader will become cognizant of their …

Airline Consumers’ Perception Of Transport Security Administration’S Prohibited Items, Clayton Ernest D'Souza

Theses and Dissertations

There has been limited research conducted and significantly limited scholarly articles on consumer attitudes towards the current TSA prohibited items list. If the research were to be conducted a year after the September 11, 2001 attacks, the results of the research would be negatively skewed, indicating the majority of passengers would approve of the TSA prohibited list. But after almost thirteen years since the devastating act of terrorism and no major attempt to repeat a similar terrorist activity, would airline consumers continue to fly if the TSA amended the prohibited items list and allowed passengers to bring on liquids and …

Determining Annoyance Thresholds Of Tones In Noise, Jennifer M. Francis, Joonhee Lee, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Building services equipment often produces noise signatures with significant tones in them that can lead to complaints in the built environment. Previous studies have investigated prominence levels of assorted tonal frequencies, but it is still unclear what prominence of the tones across varying tonal frequencies can lead to human annoyance. This project seeks to apply two different methods towards defining annoyance thresholds of tones in noise at two tonal frequencies: 125 Hz and 500 Hz. In the first, subjects are asked to perform a task, while exposed to ten minutes of a broadband noise spectrum with a specific level of …

Automated Selection Of The Optimal Cardiac Phase For Single-Beat Coronary Ct Angiography Reconstruction, Daniel Stassi

Master's Theses (2009 -)

This thesis investigates an automated algorithm for selecting the optimal cardiac phase for CCTA reconstruction. Reconstructing a low-motion cardiac phase improves coronary artery visualization in coronary CT angiography (CCTA) exams. Currently, standard end-systole and/or mid-diastole default phases are prescribed or alternatively, quiescent phases are determined by the user. As manual selection may be time-consuming and standard locations may be suboptimal due to patient variability, an automated method is investigated. An automated algorithm was developed to select the optimal phase based on quantitative image quality (IQ) metrics. For each reconstructed slice at each reconstructed phase, an image quality metric was calculated …

An Experimental Fatigue And Finite Element Study Of A Welded Joint Of A Snowplow Blade, George Ernest Selburg

Master's Theses (2009 -)

This study describes a method to evaluate the fatigue life of a welded joint of a snowplow. Fatigue specimens were then fabricated, which simulated the joint and its loading characteristics. The joint in the specimens were characterized by measuring the geometry of the weld and the hardness of the parent material, weld material, and heat affected zone. It was determined that the fatigue crack that developed in the joint was exposed to mode I fracture forces in the normal plane of the crack. The specimens were then tested in a hydraulic closed looped system to determine the mechanism of fatigue …

Design Of A Passive Ankle Prosthesis With Powered Push-Off Using A Cam Timing Mechanism, Jacob J. Rice

Master's Theses (2009 -)

This thesis presents the design and simulation results of the CamWalk, a novel passive prosthetic ankle that has mechanical behavior similar to that for a natural ankle. The CamWalk uses a compression spring network that allows coupling between two degrees of freedom; one for translation along the leg and another for rotation about the ankle joint. When walking, potential energy from the person's weight is stored in the spring network in deflection along the leg. The energy is released by the network as rotation of the foot. The amount of translational work that is converted to rotational work about the …

Analysis Of Sensor Signals And Quantification Of Analytes Based On Estimation Theory, Karthick Sothivelr

Master's Theses (2009 -)

Compact sensor systems for on-site monitoring of groundwater for trace organic compounds are currently under development. To permit near real-time analysis of samples containing multiple analytes, the present work investigates a sensor signal processing approach based on estimation theory, specifically using Kalman Filter and Extended Kalman Filter. As a first step towards the analysis of groundwater samples containing multiple compounds, the approach presented in this work permits estimation of analyte concentration(s) in binary mixtures and single analyte samples on-line, before the sensor response reaches steady-state. Sensor signals from binary mixtures and single analyte samples of BTEX compounds (benzene, toluene, ethylbenzene, …

Modeling, Analysis, And Verification Of A Weld-Breaking Mechanism For Automatic Circuit Recloser Applications, Brian Korves

Master's Theses (2009 -)

The automatic circuit recloser (ACR) is responsible for protecting electrical distribution grids in the event that high voltage power lines come in contact with ground. In order to prevent damage, ACRs break the electrical continuity of the circuit through the use of a vacuum interrupter and a weld breaking mechanism. Vacuum interrupters consist of two metallic contacts in an air-tight ceramic housing. Due to the electrical interactions that take place during the interruption process, unintended welds are formed between the contacts. These welds have the ability to impede or completely stop the interruption process, thus rendering the ACR inoperable. In …

The Effects Of Organ-Based Tube Current Modulation On Radiation Dose And Image Quality In Computed Tomography Imaging, Diksha Gandhi

Master's Theses (2009 -)

The purpose of this thesis was to quantify dose and noise performance of organ-dose-based tube current modulation (ODM) through experimental studies with an anthropomorphic phantom and simulations with a voxelized phantom library. Tube current modulation is a dose reduction technique that modulates radiation dose in angular and/or slice directions based on patient attenuation. ODM technique proposed by GE Healthcare further reduces tube current for anterior source positions, without increasing current for posterior positions. Axial CT scans at 120 kV were performed on head and chest phantoms (Rando Alderson Research Laboratories, Stanford, CA) on an ODM-equipped scanner (Optima CT660, GE Healthcare, …

Analysis Of The Detection Of Organophosphate Pesticides In Aqueous Solutions Using Polymer-Coated Single Idt Sensors, Michael J. Mccarthy

Master's Theses (2009 -)

The single interdigital transducer (IDT) device was investigated as a micro-chemical sensor for the detection of organophosphates compounds in aqueous solutions. The compounds of interest are: parathion, parathion-methyl, and paraoxon. The polymers used as a partially-selective coating for the direct detection of these compounds are 2,2'-diallylbisphenol A- 1,1,3,3,5,5-hexamethyltrisiloxane (BPA-HMTS) and polyepichlorohydrin (PECH). BPA-HMTS is synthesized here at Marquette University. The measurement of interest for the single IDT is the change radiation resistance. The radiation resistance represents the energy stored in the propagating acoustic wave. As analyte absorbs into the polymer coating, changes in the film's properties will undergo resulting in …

Design And Verification Of A Compact Variable Stiffness Actuator With A Very Large Range Of Stiffness, Daniel Garces

Master's Theses (2009 -)

Current conventional robots require high stiffness joints to provide absolute positioning accuracy in free space which also causes problems when operating in constrained space. To circumvent these problems, Variable Stiffness Actuators (VSAs) can be used to vary their stiffness to suit the task being performed. A new VSA was designed to provide a very large range of stiffness in a compact size. The Arched Flexure VSA uses a cantilevered beam acting as the flexure with a variable point of contact. It allows the joint to have continuous variable stiffness, have zero stiffness for a small range of motion, and rapid …

Measurement And Modeling Of Fire Behavior In Leaves And Sparse Shrubs, Dallan R. Prince

Theses and Dissertations

Wildland fuels and fire behavior have been the focus of numerous studies and models which provide operational support to firefighters. However, fuel and fire complexity in live shrubs has resulted in unexpected and sometimes aggressive fire behavior. The combustion of live fuels was studied and modeled, and the results were assimilated into a shrub-scale fire behavior model which assumes fire spread by flame-fuel overlap. Fire spread models have usually assumed that radiation heat transfer is responsible for driving fire spread, but that assumption is a topic of continuing debate, and appears to contradict some experimental observations. A convection-based shrub-scale fire …

Optimal Aggregation Of Fcεri With A Structurally Defined Trivalent Ligand Overrides Negative Regulation Driven By Phosphatases, Avanika Mahajan, Dipak Barua, Patrick Cutler, Diane S. Lidke, Flor A. Espinoza, Carolyn Pehlke, Rachel Grattan, Yuko Kawakami, Chang-Shung Tung, Andrew R. M. Bradbury, William S. Hlavacek, Bridget S. Wilson

Chemical and Biochemical Engineering Faculty Research & Creative Works

To investigate why responses of mast cells to antigen-induced IgE receptor (FcεRI) aggregation depend nonlinearly on antigen dose, we characterized a new artificial ligand, DF3, through complementary modeling and experimentation. This ligand is a stable trimer of peptides derived from bacteriophage T4 fibritin, each conjugated to a hapten (DNP). We found low and high doses of DF3 at which degranulation of mast cells sensitized with DNP-specific IgE is minimal, but ligand-induced receptor aggregation is comparable to aggregation at an intermediate dose, optimal for degranulation. This finding makes DF3 an ideal reagent for studying the balance of negative and positive signaling …

Monoclinic Phases Arising Across Thermal Inter-Ferroelectric Phase Transitions, Yijia Gu, Fei Xue, Shiming Lei, Tom T. A. Lummen, Jianjun Wang, For Full List Of Authors, See Publisher's Website.

Materials Science and Engineering Faculty Research & Creative Works

Thermotropic phase boundaries (TPBs), as thermal analogs of morphotropic phase boundaries (MPBs), are associated with the thermal inter-ferroelectric phase transitions. Similar to an MPB, a TPB exhibits a characteristically flattened energy profile which favors polarization rotation, thus giving rise to a structurally bridging low-symmetry phase. We report on the kinetic process of thermal inter-ferroelectric phase transitions in BaTiO₃ and KNbO₃ using the phase-field method. The domain structures are found to play key roles in stabilizing the monoclinic phase. In simple domain structures, the monoclinic phase is a transient phase and cannot be stabilized into its neighboring phase regimes. …

Modulating Notochordal Differentiation Of Human Induced Pluripotent Stem Cells Using Natural Nucleus Pulposus Tissue Matrix, Yongxing Liu, M. N. Rahaman, B. Sonny Bal

Materials Science and Engineering Faculty Research & Creative Works

Human induced pluripotent stem cells (hiPSCs) can differentiate into notochordal cell (NC)-like cells when cultured in the presence of natural porcine nucleus pulposus (NP) tissue matrix. The method promises massive production of high-quality, functional cells to treat degenerative intervertebral discs (IVDs). Based on our previous work, we further examined the effect of cell-NP matrix contact and culture medium on the differentiation, and further assessed the functional differentiation ability of the generated NC-like. The study showed that direct contact between hiPSCs and NP matrix can promote the differentiation yield, whilst both the contact and non-contact cultures can generate functional NC-like cells. …

Integration Of Microwave And Thermographic Ndt Methods For Corrosion Detection, Dustin F. Pieper, Kristen M. Donnell, Mohammad Tayeb Ahmad Ghasr, Edward C. Kinzel

Electrical and Computer Engineering Faculty Research & Creative Works

Infrastructure health monitoring is an important issue in the transportation industry. For the case of cement-based structures in particular, detection of corrosion on reinforcing steel bars (rebar) is an ongoing problem for aging infrastructure. There have been a number of techniques that have shown promise in this area including microwave nondestructive testing (NDT) and thermography. Thermography is quite advantageous as it is an established method, and can be utilized for large inspection areas with intuitive results. Typical heat sources include induction heating and flash lamps, but these are not without drawbacks. Microwave nondestructive testing has also been successful at detecting …

A Novel Microgrid Demand-Side Management System For Manufacturing Facilities, Terance Jerome Harper

Open Access Theses

Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable.

For this research, a manufacturing process that had approximately …

2013 Summary Of Highway Revenues, Distributions & Expenses, Indiana Ltap

Indiana Local Technical Assistance Program (LTAP) Publications

This report provides information on revenues, distributions, and expenses of state and local governments for highway, road, and street work. Since the Motor Vehicle Highway (MVH) and Local Road and Street (LRS) Accounts are the principal source of funds for local road or street construction and maintenance operations, this summary may be used to see the trends in income sources and in the expenses charged to the funds prior to their being distributed to the highway, road, and street agencies.

Experimental Investigation On The Shear Characteristics Of Gfrp Reinforcement Systems Embedded In Concrete., Austin Beau Connor

Electronic Theses and Dissertations

To mitigate the deterioration of steel-reinforced concrete members, a fiber-reinforced polymers (FRPs) system has been introduced and has increasingly been used to replace the conventional steel reinforcing bar. However, questions remain about the performance of the Glass Fiber Reinforced Polymer (GFRP) reinforcing bar in concrete with varied stress orientation and shape. The GFRP reinforcement is an anisotropic material that possesses low strength for the transverse direction. This paper presents the results of the shear performance of GFRP reinforcement crossing varied crack angles. Fifteen push-off specimens were tested to investigate the shear characteristics of the GFRP and steel reinforcement. Tests were …

Bs News July/August

Building Services Engineering

No abstract provided.

Path Loss Modeling For V2v Communication On A Slope, Pengyu Liu, David W. Matolak, Bo Ai, Ruoyu Sun

Faculty Publications

Path loss modeling for both regular and irregular terrains is still gaining significant attention from researchers. A sloped terrain is one specific kind of an irregular terrain that-as far as we are aware-has not been completely studied. Although some results have been published for slope path loss modeling in cellular communication, an adequate model for the case when the transmitter (Tx) and the receiver (Rx) both have low-height antennas and are located on or near a slope does not exist. In this paper, for complete analysis of such conditions, we consider four scenarios: 1) two vehicles are located at opposite …