Engineering Commons^™

The Development Of Self-Supported Electromechanical Structures Using Fused Deposition Modeling, Jorge Ramos-Almeida

Open Access Theses & Dissertations

Recent research has focused on the fabrication freedom of 3D printing to create not only conceptual models but also final end-use products. In the last decade, several research groups have reported embedding electronic components and electrical interconnects into 3D printed structures during process interruptions; however, to date there is an absence of fabricated devices with electromechanical functionality for parts fabricated in a single Additive Manufacturing (AM) build sequence.

The focus of this research is the use of Fused Deposition Modeling (FDM) to manufacture a self-supported electromechanical motor. FDM is an AM process capable of building parts in a layer-by-layer fashion. …

Dielectric And Complex Impedance Properties Of Tetravalent Hafnium (Hf 4+) Integrated Cobalt Ferrite, Luis Javier Sanchez

Open Access Theses & Dissertations

The work presented in this thesis was carried out to understand the effects of tetravalent hafnium (Hf4+) ion on the crystal structure and phase, surface morphology, electrical, dielectric and complex impedance properties of cobalt ferrite (CoFe2O4; CFO). Hafnium incorporated cobalt ferrite, CoFe2-xHfxO4, with x = 0.00, 0.05, 0.075, 0.10, 0.15 and 0.20 were prepared by the standard solid state ceramic synthesis method. X-ray diffraction (XRD) and scanning electron microscopy (SEM) characterizations were performed to determine the structural properties. Most important aspect of this study is to explore the dielectric and complex impedance properties as a function of variable temperature (T=300-1000 …

A Hybrid Modelling Approach For Maintenance And Rehabilitation Treatment Effectiveness Of Asphalt Pavements In Texas, Daniel Saenz

Open Access Theses & Dissertations

Analysis tools in pavement management systems are critical to assist transportation agencies in developing the most adequate maintenance and rehabilitation program. The significant elements are not only the type of treatment selected and its cost, but also the quantification of its short-term and long-term effectiveness and the timing of intervention. Methodologies with complex statistical approaches and performance model theories have been previously implemented in their derivation, but they may not be suitable or accurate. Therefore, it is imperative to factor in engineering experience in their assessment. In this thesis, a hybrid modelling approach was presented to systematically introduce expert knowledge …

Synthetic Asphaltene As A Novel Dye In Dye Sensitized Solar Cells Dsscs, Hassan Sharif

Open Access Theses & Dissertations

This dissertation approves the possibility of the first time use of synthetic asphaltene as new dye in dye sensitized solar cells. In which the conversion efficiency of synthetic asphaltene DSSC has improved up to 2.0 %. Synthetic asphaltene sample was prepared from the starting material as in literature and applied for various solar cell parameters of TiO2 based dyesensitized solar cell DSSC. DSSCs were fabricated using the synthetic asphaltene as dye. Different variables and parameters were carried out to test the photovoltaic performance of the cells, these parameters include open-circuit voltage, short-circuit current; fill factor. The first result was obtained …

Adsorption Of Arsenic, Chromium, And Uranium From Saline Water On Clinoptilolite And The Treatment Of The Spent Regenerant By Duffusion Dialysis, Mutiu Olaitan Tanimola

Open Access Theses & Dissertations

Among various water purification and recycling technologies, adsorption is a fast, inexpensive and universal method. The development of low-cost adsorbents has led to the rapid growth of research interests in this field. The objective of this present study is the optimization of process parameters in adsorption of arsenic, chromium and uranium ions. The adsorption behavior of natural zeolite (clinoptilolite) has been studied in order to determine its applicability in treating water containing arsenic, chromium and uranium. The multiple adsorption of arsenic As (V), trivalent chromium Cr (III)] and uranium (VI) on natural zeolite (clinoptilolite) in single component and multiple component …

Effect Of Hafnium-Incorporation On The Microstructure And Dielectric Properties Of Cobalt Ferrite Ceramics, Stephen Josiah Wells

Open Access Theses & Dissertations

The effect of hafnium ion (Hf⁴⁺) incorporation in cobalt ferrite (CFO) was studied. Samples of Hf substituted CFO ceramic (CoFe_2-xHf_xO₄), were synthesized in the laboratory with hafnium concentrations ranging from x=0.000 to x=0.200. X-ray diffraction scans show that the Hafnium CFO crystalizes in the inverse spinel phase. Inclusion of hafnium causes lattice expansion, increasing the lattice parameter from 8.374 í? for pure CoFe2O4 to 8.391 í? for the highest concentration of hafnium tested (x=0.020). The dielectric properties of CFO are greatly enhanced by inclusion of hafnium. The enhancement is due to the …

Portraits Of Success: A Mixed-Method Study Of The Enrollment, Persistence, And Success Experiences Of Female Graduate Engineering Students At A Hispanic Serving Institution, Sandra Aguirre-Covarrubias

Open Access Theses & Dissertations

The current study addresses the underrepresentation of female graduate engineering students. Specifically, its purpose was to gain insight on how enrollment, persistence, and success factors are experienced by female graduate engineering students at a Hispanic Serving Institution located on the U.S.-Mexico border. The topic of underrepresentation of female graduate engineering students is important for higher education practitioners because in spite of the numerous attempts to increase their enrollment in science, technology, engineering and mathematics, their underrepresentation has persisted. The current study is modeled after research conducted by Cordova-Wentling and Camacho (2006). The research question that guides the current study is: …

A Systematic Approach To Manage Missing Data In Pavement Management Systems, Mazin M. Al-Zou'bi

Open Access Theses & Dissertations

Pavements are an important part of the highway transportation infrastructure, accounting for the largest share of the overall investment. A tremendous amount of time and money is spent each year on the construction of new pavements, as well as on the maintenance and rehabilitation of existing pavements.

Transportation agencies use pavement management systems (PMS) for their maintenance and rehabilitation planning, programming, and budgeting. PMS are used to make decisions regarding when maintenance and rehabilitation should be applied. The systems also select what type of treatment should be applied for each pavement section in the network with clear estimations of the …

Optimization Of Stress Wave-Based Nondestructive Methods In Identifying Deterioration In Concrete Structures, Hoda Azari

Open Access Theses & Dissertations

The transportation infrastructure across the United States is deteriorating and requires periodic inspection to predict the cost of repair and extent of maintenance activities, to remedy structural problems, and to ensure safety and serviceability. The use of nondestructive testing (NDT) methods in detecting and characterizing flaws in the infrastructure has become more common. Among different NDT methods, the stress wave-based methods, including ultrasonic surface waves (USW) and impact echo (IE) methods, are widely used to maintain concrete structures. In this dissertation, a complete literature review of seismic wave theory and wave propagation in plate like structures, and stress wave-based methods …

The Investigation Of The Practice Of Frugal Innovation Across Cultures And The Introduction Of An Instructional Model For Streamlining The Design Process, Andres Efren Bolanos

Open Access Theses & Dissertations

The central objectives of this dissertation are to analyze frugal innovation, apply foundational methodologies that contribute to product design, and discover the important contextual information for successful development. This dissertation describes a systematic procedure in designing frugally innovated products. The institutional design will encompass environmental, social, and economic impacts into the entire products' life cycle. Also, a comparison is made between two developing nations' contextual factors to reveal the formulation of frugal innovation.

Evaluation Of Novel Backwashable Cartridge Filters: Efficacy And Sustainability, Michelle Brown

Open Access Theses & Dissertations

One of the important aspects of desalination pre–treatment is the removal of particles from feedwater. This is typically accomplished using a combination of gross filtration and cartridge filtration. Cartridge filters are typically single–use products, and their replacement can represent a significant portion of a desalination plant's operating budget. This research evaluated the performance of a new type of cartridge filter that is backwashable and aims to reduce the overall cost to desalination facilities and provide cleaner water. Two sets of filters were evaluated (in triplicate) with respect to particle removal efficiency and hydraulic efficiency. The initial set included four types …

Thermal Barrier Coatings (Tbc's) For High Heat Flux Thrust Chambers, Christopher Michael Bradley

Open Access Theses & Dissertations

The last 30 years materials engineers have been under continual pressure to develop materials with a greater temperature potential or to produce configurations that can be effectively cooled or otherwise protected at elevated temperature conditions. Turbines and thrust chambers produce some of the harshest service conditions for materials which lead to the challenges engineers face in order to increase the efficiencies of current technologies due to the energy crisis that the world is facing. The key tasks for the future of gas turbines are to increase overall efficiencies to meet energy demands of a growing world population and reduce the …

A Block Operator Splitting Method For Heterogeneous Multiscale Poroelasticity, Paul M. Delgado

Open Access Theses & Dissertations

Traditional models of poroelastic deformation in porous media assume relatively homogeneous material properties such that macroscopic constitutive relations lead to accurate results. Many realistic applications involve heterogeneous material properties whose oscillatory nature require multiscale methods to balance accuracy and efficiency in computation.

The current study develops a multiscale method for poroelastic deformation based on a fixed point iteration based operator splitting method and a heterogeneous multiscale method using finite volume and direct stiffness methods. To characterize the convergence

of the operator splitting method, we use a numerical root finding algorithm to determine a threshold surface in a non-dimensional parameter space …

Development And Testing Of An Ignition Physics Test Facility And An Oxygen/Methane Swirl Torch Igniter, Jesus Roberto Flores

Open Access Theses & Dissertations

There are many advantages to LOX/methane propulsion, such as in-situ resource utilization from Mars and the Moon, and simplicity of ground operations due to its non-toxic nature. There exists a lack of fundamental understanding of the ignition physics, and flame characteristics of these propellants when related to rocket propulsion, which has created undesirably long design cycles and flight hardware that is not optimized. Motivated by these issues, a study of the ignition physics of a shear coaxial injector is proposed, in which the flow field dynamics and ignition transients will be observed through a visually accessible combustion chamber. The main …

Pressure And Heat Flux Effects On The Heat Transfer Characteristics Of Liquid Methane, Chance Paul Garcia

Open Access Theses & Dissertations

The heat transfer effects on liquid methane are investigated with the use of a carbo-thermal rig at the Center for Space Exploration Technology Research (cSETR) located at the University of Texas at El Paso (UTEP). The cSETR carbo-thermal rig design approach is presented along with the design of a methane condensing mobile unit (MCMU) to supply the laboratory and rig with liquid methane. The proposed research will generate useful insight in to heat transfer coefficient behavior, non-dimensional correlations, different flow conditions, varied inlet conditions, and varied heat flux for a subscale test article applicable to a regenerative cooled rocket engine …

Microstructure And Properties For Titanium Aluminide Superalloy Prototypes Fabricated By Electron Beam Melting And Thermally Processed, Jennifer Hernandez

Open Access Theses & Dissertations

Gamma TiAl has been considered to be an ideal replacement for Ni-base superalloy aerospace applications, particularly in weight-critical applications. While bulk, fully dense gamma-TiAl is 50% less dense than Ni-base superalloys, it also has excellent mechanical properties at high temperature (up to ~800°C). Pre alloyed (Ti-48Al-2Cr-2Nb) powder was used to fabricate solid, fully dense (3.85 g/cm3) components and foam components with densities ranging from 0.33 g/cm³ to 0.46 g/cm³ by electron beam melting (EBM). A 10:1 blend of 2-phase TiAl (Ti-48Al-2Cr-2Nb in ^a/_o) : Inconel 625 (Ni-22Cr-6Mo-2Nb in ^a/_o) pre-alloyed powders produced …

A Damage-Trap Interfacial Design To Improve Impact Resistance Of Polymers, Md Shariful Islam

Open Access Theses & Dissertations

Polymer materials such as Polycarbonate (PC), Polymethyl methacrylate (PMMA) have numerous applications in transparent armor which includes body and face shield, helmet, windows of the armored vehicle etc. The most challenging part of these applications is to ensure the safety of the people. These materials are often subjected to impact loading, so it is important to study the failure of these materials under impact loading. An experimental study has been made to investigate the impact damage in transparent layered materials. Impact experiments were carried out on various monolithic specimens and layered specimens for both two types of materials at different …

Critical Parts Retrieval And Profit Maximization For Medical Sustainability Using Design For Disassembly And Modularity, Karthik Varma Manikanta Koppella

Open Access Theses & Dissertations

With rising medical expenditure and increase in medical waste, it is highly imperative to look for ways to recycle and reuse medical products. Even though the reprocessing industry has made use of optimum disassembly techniques in order to derive the maximum possible profit from each medical device, it is limited since most of the medical devices can be hard to recycle without a change in the basic design complying with life cycle goals. This study will introduce a framework which will help to combine the optimum disassembly techniques with the modularity concept in order to come up with recommendations for …

Anasic Design And Test Methodology For An Undergraduate Design And Fabrication Project, Arun Joseph Kurian

Open Access Theses & Dissertations

During the 1990's the main focus of chip design methodologies was on the timings and area constraints. Power consumption was considered significant only after a drastic increase of device densities from 130nm on as well as dramatic increases in sub threshold leakage. As technology advanced from 130nm to 90nm and below there was a significant increase in leakage current due to lower threshold voltage and the influence of the deep submicron effects. High power consumption causes different problems such as increasing the cost of the product, reducing the reliability, reducing the battery life among others. Therefore EDA tools were designed …

An Exploration Of Social Media Use Among Multiply Minoritized Lgbtq Youth, Alfie Leanna Lucero

Open Access Theses & Dissertations

This study responds to a need for research in a fast-growing and significant area of study, that of exploring, understanding, and documenting the numerous ways that multiply marginalized LGBTQ youth between the ages of 14 and 17 use social media. The primary research question examined whether social media provide safe spaces for multiply minoritized LGBTQ youth to express and explore issues of sexuality and gender. In addition, the study explores and categorizes multiple ways that the participants interact with social media and makes comparisons to prior work with more general populations. The study provides descriptions of the participants in terms …

New Topics On Nanoindentation Of Polymers And Composite Materials, Ricardo Martinez-Hernandez

Open Access Theses & Dissertations

In this study, nanoindentation was used to determine Young's modulus of homogeneous plastic materials as well as inhomogeneous epoxy woven fabric composites using various indenters. In the first part, homogeneous PMMA and polycarbonate were characterized using conical and spherical indenters. The conventional approach of the inverse analysis was modified in order to account for effects obtained during spherical nanoindentation. The experimental results were verified using FEA analysis in ABAQUS. It was found that viscous effects were present in conical nanoindentations which led to an overestimation of contact stiffness. The second part, the response of carbon and glass fiber woven fabric …

Optimization Of Biomass Logistics System Using Genetic Algorithm And Particle Swarm Optimization For Biofuel Production, Ethel Regina Martinez-Schabez

Open Access Theses & Dissertations

As time goes by, Renewable Energy keeps proving to be an important and potential replacement for fossil fuels. All the different types of Renewable Energy offer a relief to the environmental aftermaths of the prolonged reliance on fossil fuel energy. Bioenergy is one of the types of Renewable Energy that can help by minimizing the emissions of fossil fuels. The Energy Independence and Security Act mandates the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. Biomass and Biofuels can clearly become a significant aid to sustainably supply energy in …

Exploring New Concepts In Directional Solidification By Electron Beam Melting And Selective Laser Melting, Edwin Martinez

Open Access Theses & Dissertations

Unlike more conventional directional solidification, electron and laser-beam melting technologies involve building 3D components through layer-by-layer melt/solidification thermal cycling which creates novel, directional microstructural architectures. In this study we compared various the columnar microstructures of various components manufactured by EBM and SLM; image composite observations of columnar microstructural architectures in Cu, Co-29-Cr-6Mo-0.2C alloy, Ni-22Cr-9Mo-4Nb (alloy 625) fabricated by electron beam melting (EBM), and Ni-19Cr-19Fe-5Nb-1Al (alloy 718) by selective laser melting (SLM) as well as stainless steel 17-4 PH (SLM). Cu produced discontinuous columns of Cu2O precipitates while the Co-base alloy exhibited similar columns of Cr23C6 precipitates. The alloy 625 produced …

Rbd2po4: Room Temprature Synthesis, Chemical And Structural Stablity Upon Heating, Masoud Mollaee

Open Access Theses & Dissertations

Monoclinic RbD2PO4 polycrystals were synthesized via the room temperature crystallization of RbH2PO4 dissolved in D2O. Powder x-ray diffraction (XRD) data collected at T=25 ºC indicate that this deuterated compound crystallizes in space group P21/m with unit cell parameters a=7.688í?, b=6.192í?, c=4.781í? and β=109.02°, and is isomorphic with the intermediate-temperature phase of its hydrogenated counterpart rubidium dihydrogen phosphate (RDP). We found no evidence of previously reported [Phase Transitions 80, 17 (2007)] polymorphic phase transition in rubidium dideuterium phosphate (DRDP) upon heating from room temperature to 210 ºC. All lattice parameters vary smoothly within this temperature range, demonstrating that the P21/m phase …

Novel Copper (Ii) Mediated Transfection Nano-Systems And Biological Properties Of Pyridinium Surfactants, Sarit Pal

Open Access Theses & Dissertations

Efficacy of gene therapy is relied upon the improvement of gene delivery vectors into mammalian cells. Although viral-based polynucleotide carriers are still considered as the most common method for gene delivery but the cost effectiveness, nonspecific lethal immune response has evoked the renaissance of non-viral synthetic delivery systems. An initial discovery by Felgnar et al showed Cationic Liposomes (CLs) (having an overall positive charge) when mixed with DNA to form CL-DNA complexes can enhance the transfer of polynucleotides into cells followed by its expression. Presently, a flurry of experimental works is taking place for the better understanding of structural characterization …

Geochemical Characterization Of Mineral Dust Sources In The Chihuahuan Desert And Southern High Plains Regions, Porfirio Peinado

Open Access Theses & Dissertations

The Chihuahuan Desert (northern Chihuahua, southern New Mexico, and far west Texas) and the southern High Plains (west Texas and eastern New Mexico) regions have been identified as one of the most persistent dust producing regions of North America. Regional-scale dust storms have been observed by satellite imagery to identify sources of dust, resulting in collection and examination of physical soil samples to better understand the source signatures (geochemical characteristics) of dust origins in these two regions.

The soil characteristics were examined through several techniques: Particle Size Distribution, X-Ray Diffraction (XRD), Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), and Total …

3d Printed Impedance Elements By Micro-Dispensing, Ubaldo Robles Dominguez

Open Access Theses & Dissertations

Micro-dispensing allows electric circuits to be "3D printed," which can be used to give 3D printed systems electronic and electromagnetic functionality. The focus of this thesis is using micro-dispensing to fabricate capacitors and inductors. 3D printed impedance elements are capable of being more easily embedded, can be used to create structural electronics, and will have extensive applications in antennas, metamaterials, frequency selective surfaces, and more. This is the first known effort to print and measure impedance elements by micro-dispensing which holds great potential for manufacturing multi-material devices.

Development Of A Thermal Imaging Feedback Control System In Electron Beam Melting, Emmanuel Rodriguez

Open Access Theses & Dissertations

The Electron Beam Melting (EBM) process is a promising technology in the rapid manufacturing of metal components. EBM has the potential to reduce the cost of metal parts by minimizing the use of raw materials and machining time. The EBM technology has several advantages over other additive manufacturing (AM) technologies of metal, such as manufacturing speed and mechanical properties of the finished parts. For the process to be accepted in the aerospace industry as a flight-ready manufacturing technology, however, improved control and feedback must be implemented in the building process for better part quality and uniform production in manufacturing. As …

Analysis Of Vehicle Interactions On Interstate Highways: Discrete Choice And Linear System Approaches, Alicia Romo

Open Access Theses & Dissertations

The research in this dissertation developed statistical and linear system models to predict driving behavior according to driver attributes, vehicle characteristics, car-following dynamics and/or driving conditions. The scope of this research was limited to the interaction of two vehicles traveling in the same direction on interstate highways.

The statistical models proposed in this research investigated the contributions of the different vehicle types on the manner and likelihood of collision. Discrete choice models were used to estimate the probability of the types of collision (rear-end, angle and sideswipe) as functions of driver attributes, striking and struck vehicle types, pre-crash driving actions …

Design Of A Biomass-To-Biorefinery Logistics System Through Bio-Inspired Metaheuristic Optimization Considering Multiple Types Of Feedstocks, Isidoro Trueba

Open Access Theses & Dissertations

Bioenergy has become an important alternative source of energy to alleviate the reliance on petroleum energy. Bioenergy offers significant potential to mitigate climate change by reducing life-cycle greenhouse gas emissions relative to fossil fuels. The Energy Independence and Security Act mandate the use of 21 billion gallons of advanced biofuels including 16 billion gallons of cellulosic biofuels by the year 2022. It is clear that Biomass can make a substantial contribution to supplying future energy demand in a sustainable way. However, the supply of sustainable energy is one of the main challenges that mankind will face over the coming decades. …