Engineering Commons^™

Development Of A Counter Rotating Vortex Pair (Cvp) Mixer For Aerospace Applications, Jeongmoon Park

Open Access Theses

Swirling motions induced by a counter-rotating vortex pair (CVP) provides a mechanism to entrain fluid from the periphery of this structure and mix surrounding fluids with those within the vortex structure. Eventually, the vortices act upon each other transporting molecularly mixed fluid into the core flow. This mechanism has potential to increase efficiency with more complete mixing. Therefore, a mixer is proposed which directly induces counter rotating vortices by a three dimensional geometry. The proposed swirl mixer is designed to induce counter rotating vortices based on the potential flow theory, Milne-Thomson's Circle Theorem and Rankine vortex. Twelve test models are …

Nutrient Recovery From Anaerobically-Digested Dairy Manure By Struvite Formation And Its Effect On Gas Releases, Zhong Qiao

Open Access Theses

Manure management practices such as anaerobic digestion and lagoon storage have become important issues for large dairy farms partially due to water quality and air quality concerns caused by excess nitrogen and phosphorus. Prior research efforts have proven that struvite formation is an effective method for nutrients recovery from both municipal and agricultural wastewaters. However, little is known about nutrient recovery through struvite formation from anaerobically-digested dairy manure effluents.The effects of struvite precipitation on the releases of gases such as NH3, H2S, and CO2 are also unclear.

In this thesis, both bench-scale tests and pilot-scale storage tests were conducted to …

Analysis Of An Actuated Two Segment Leg Model Of Locomotion, Nikhil Vinayak Rao

Open Access Theses

Research studies on dynamic models of legged locomotion have generally focused on telescoping-type leg models. Such telescoping spring loaded inverted pendulum (SLIP) models have been able to accurately predict observed center of mass (CoM) trajectories. There have been comparatively fewer studies on dynamics of locomotion

with segmented legs. Some earlier studies on the dynamics due to leg segmentation appear straightforward. For example, a simple model with the only joint moment being due to a passive springy knee has been shown to behave similarly to a telescoping spring-mass model. However, in real-life animal locomotion, there are multiple joint-moments acting at the …

A Mechanism Design Approach To Bandwidth Allocation In Tactical Data Networks, Ankur Mour

Open Access Theses

The defense sector is undergoing a phase of rapid technological advancement, in the pursuit of its goal of information superiority. This goal depends on a large network of complex interconnected systems - sensors, weapons, soldiers - linked through a maze of heterogeneous networks. The sheer scale and size of these networks prompt behaviors that go beyond conglomerations of systems or `system-of-systems'. The lack of a central locus and disjointed, competing interests among large clusters of systems makes this characteristic of an Ultra Large Scale (ULS) system. These traits of ULS systems challenge and undermine the fundamental assumptions of today's software …

Rotor Blade Operational Data Analysis Methods And Applications For Health Monitoring Of Wind Turbines Using Integrated Blade Sensing, Noah Jacob Myrent

Open Access Theses

Wind energy is one of the fastest growing sources of power production in the world today. In order to extract the maximum potential amount of energy from the wind, a wind turbine's reliability must be a top priority. As utility scale wind turbines increase in size and initial capital investment cost, there also comes an increasing need to monitor the health of the turbine. Currently, most wind turbines do not incorporate blade mounted inertial sensing in addition to blade strain measurements. This approach has the potential to detect inevitable blade damage types early on so that a maintenance schedule can …

Simulating Land Use Land Cover Change Using Data Mining And Machine Learning Algorithms, Amin Tayyebi

Open Access Dissertations

The objectives of this dissertation are to: (1) review the breadth and depth of land use land cover (LUCC) issues that are being addressed by the land change science community by discussing how an existing model, Purdue's Land Transformation Model (LTM), has been used to better understand these very important issues; (2) summarize the current state-of-the-art in LUCC modeling in an attempt to provide a context for the advances in LUCC modeling presented here; (3) use a variety of statistical, data mining and machine learning algorithms to model single LUCC transitions in diverse regions of the world (e.g. United States …

Orientation Controllable Epitaxial Vapor-Liquid-Solid Semiconductor Nanowire Synthesis On Silicon Substrate, Sung Hwan Chung

Open Access Dissertations

Semiconductor nanowires synthesized via the vapor-liquid-solid (VLS) mechanism have attracted extensive research interest in recent years owing to their unique structure as a promising candidate for the future electronic devices. Germanium and silicon nanowires, in particular, are compatible with the current silicon-based technology via direct assembly. However, one of the main challenges for the successful nanowire application in large-scale is the lack of the method for obtaining nanowires in desired positions and directions. Therefore, the comprehensive, systematic understanding of epitaxial nanowire growth and the more suitable method to align nanowires on novel structure are required. In this work, the synthesis …

Interactional Analysis Of Emergent Risks In Institutionally Diverse Construction Projects, Nader Naderpajouh

Open Access Dissertations

Naderpajouh, Nader Ph.D., Purdue University, December 2013. Interactional Analysis of Emergent Risks in Institutionally Diverse Construction Projects. Major Professor: Makarand Hastak.

Construction projects, as complex systems of systems (SOS), increasingly involve institutionally diverse actors that escalate complexity of the projects. Examples of these actors include the export credit agencies, international organizations such as the World Bank, non-governmental organizations (NGO), regulatory actors, transnational organizations, as well as public and community groups. The observed surge in complexity of the projects aim to enhance their robustness in: i) sustaining the increasing demand for service of these projects, and ii) sustaining the contextual fluctuation …

Information Measures For Statistical Orbit Determination, Alinda Kenyana Mashiku

Open Access Dissertations

The current Situational Space Awareness (SSA) is faced with a huge task of tracking the increasing number of space objects. The tracking of space objects requires frequent and accurate monitoring for orbit maintenance and collision avoidance using methods for statistical orbit determination. Statistical orbit determination enables us to obtain estimates of the state and the statistical information of its region of uncertainty given by the probability density function (PDF). As even collision events with very low probability are important, accurate prediction of collisions require the representation of the full PDF of the random orbit state. Through representing the full PDF …

Evaluating Food Safety Systems Development And Implementation By Quantifying Haccp Training Durability, Marienne A. Anandappa

Theses and Dissertations--Animal and Food Sciences

HACCP-based food safety programs have been widely acclaimed, accepted and implemented as an effective means of managing food safety risks. While HACCP training is a cornerstone of managing HACCP programs, there is little information about the effectiveness of HACCP training and the durability of HACCP knowledge. Findings reveal a link between involvement level in HACCP activities and the accuracy of HACCP knowledge over time. Opportunities for peer training in HACCP, irrespective of overall experience in the food industry provide favorable circumstances for maintaining accuracy of HACCP knowledge. The optimal window for engaging employees in HACCP is directly following the completion …

Prediction Of The Thermomechanical Behavior Of Particle-Reinforced Metal Matrix Composites, Yi Hua, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

The objective of this paper was to predict the thermomechanical behavior of 2080 aluminum alloy reinforced with SiC particles using the Mori–Tanaka theory combined with the finite element method. The influences of particle volume fraction, stiffness, aspect ratio and orientation were examined in terms of effective Young’s modulus, Poisson’s ratio and coefficient of thermal expansion (CTE) of the composite. The microstructure induced local stress and strain field was obtained through the numerical models of the representative volume element. Results suggested that particle volume fraction had significant impact on the effective Young’s modulus, Poisson’s ratio and CTE of the composite. Stiffer …

Argumentation Theory For Decision Support In Health-Care: A Comparison With Machine Learning, Luca Longo, Lucy Hederman

Books/Book Chapters

This study investigates role of defeasible reasoning and argumentation theory for decision-support in the health-care sector. The main objective is to support clinicians with a tool for taking plausible and rational medical decisions that can be better justified and explained. The basic principles of argumentation theory are described and demonstrated in a well known health scenario: the breast cancer recurrence problem. It is shown how to translate clinical evidence in the form of arguments, how to define defeat relations among them and how to create a formal argumentation framework. Acceptability semantics are then applied over this framework to compute arguments …

The Modeling, Analysis And Control Of Resilient Manufacturing Enterprises, Yao Hu

Theses and Dissertations--Electrical and Computer Engineering

The resilience of manufacturing enterprises is an important research topic, since disruptions have severe effects on the normal operation of manufacturing enterprises, especially as manufacturing supply chains become global. Although many case studies have been carried out to address resilience in organizations, a systematic method to model and analyze the resilience dynamics in manufacturing enterprises is not well developed. This study is intended to conduct research on quantitative analysis and control for resilience.

After reviewing the literature addressing resilience, a modeling framework is presented to characterize the resilience of a manufacturing enterprise responding to disruptive events, which includes inventory ow …

Producing Children's Toys Through 3-D Printing: A Multidisciplinary Approach, Rebekah Rifareal

AUCTUS: The Journal of Undergraduate Research and Creative Scholarship

One of the things that first attracted me to VCU was the opportunity for interdisciplinary discussions and interactions. I saw HSURP as a way to push my boundaries and interact with peers from different disciplines. When I saw the Social Design and 3-D Printing project, it just clicked. I saw the opportunity for engineering, for arts, for research, for graphic design. All of the things I was interested in learning about all came together.

Fatigue Behavior And Microstructure Examination Of Aisi D2 Trim Dies, Xinchen Wang

Wayne State University Theses

AISI D2 steels are widely used as tools for forming, drawing and trimming dies due to its high wear resistance, high compressive strength and low distortion, and its performance as a trim die material for cutting ultra-high strength steels (at 1GPa or above) is investigated in this study.

To simulate the production trimming process under a laboratory accelerated fatigue condition, a trim die simulator and testing technique have been developed. In this test 1" cubic die samples were used that offers total 12 cutting edges of 6 different material grain orientations in shearing, and with adjustable die clearance. A non-contact …

Learning With An Insufficient Supply Of Data Via Knowledge Transfer And Sharing, Samir Al-Stouhi

Wayne State University Dissertations

As machine learning methods extend to more complex and diverse set of problems, situations arise where the complexity and availability of data presents a situation where the information source is not "adequate" to generate a representative hypothesis. Learning from multiple sources of data is a promising research direction as researchers leverage ever more diverse sources of information. Since data is not readily available, knowledge has to be transferred from other sources and new methods (both supervised and un-supervised) have to be developed to selectively share and transfer knowledge. In this dissertation, we present both supervised and un-supervised techniques to tackle …

Mechanical And Electro-Chemical Investigation Of Carbon Farbric/Epoxy And Aluminum Foam Sandwich Composite Beams, Narin Sara Fatima

Wayne State University Theses

In this study the mechanical and electrochemical response of a sandwich composite comprising of carbon fiber fabric skin and aluminum foam core was evaluated. The three point flexural test was chosen to investigate the mechanical behavior in terms of finding the deformation and failure behavior. The flexural test exhibited an excellent bond between the skin and the core. The specimens mainly failed in three different modes - indentation, core shear and face yielding and showed three distinct regions: a linear rise in load with displacement region, a rapid load drop region and a plateau region followed by a densification region. …

Techniques To Quantify The Size Of Protein Colloids In Amyloid Fiber Formation, Jonathan R. Anson, Chia-Hung Lu, Lingwen Cui, Xiaojing Yang, Shaohua Xu

Biomedical Engineering and Sciences Faculty Publications

A new method for the analysis of protein colloidal diameter has been developed using three existing protein concentration quantification techniques, absorption at 280 nm, colloidal gold assay, and DC protein assay. Protein colloids are formed in the process of aggregation and are thought to be intermediates in protein self-assembly and formation of amyloid fiber. Deposition of the protein fibers in tissues leads to numerous human diseases including Alzheimer’s. Lysozyme was incubated at pH 2.0, 55°C, an environment conducive to amyloid fiber formation. The protein colloids present in the supernatant of the samples after centrifugation were studied over a time course …

Model Based Adaptive Control Of Underwater Vehicles For Improved Ocean Science, Christopher J. Mcfarland

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

Recent advances in unmanned underwater vehicle (UUV) capabilities have enabled oceanographic scientists to consider addressing research topics previously thought impractical or impossible. One such topic is the validation of high resolution computer models; long term deployments of coordinated UUV survey teams have been proposed to collect the density of measurements required. Another topic is the study of biological diversity in volatile areas; UUV intervention/sampling deployments have been proposed because of the inherent risks. In general, providing a high density of high accuracy measurements requires passing many targets as quickly and closely as possible. Similarly, efficacy for intervention/sampling deployments requires agile …

Team Effectiveness And Project Management In A Student Team Environment, Rahul Girish Patel

All Graduate Theses, Dissertations, and Other Capstone Projects

The objective of this research study was to assess if students enrolled in MSU - Mankato's Automotive Engineering Technology (AET) program required a project management course. At present, a project management course is not included in the AET program. A survey instrument based on "The Team Effectiveness Critique" by Susan Trimble was developed to answer the research question. AET students enrolled in Senior Design courses were the main focus of this study. Survey results indicated that AET Senior Design students who had taken a project management course prior to a Senior Design course had good ratings in survey categories of …

Optimized Features Selection For Gender Classification Using Optimization Algorithms, Sajid Ali Khan, Muhammad Nazir, Naveed Riaz

Turkish Journal of Electrical Engineering and Computer Sciences

Optimized feature selection is an important task in gender classification. The optimized features not only reduce the dimensions, but also reduce the error rate. In this paper, we have proposed a technique for the extraction of facial features using both appearance-based and geometric-based feature extraction methods. The extracted features are then optimized using particle swarm optimization (PSO) and the bee algorithm. The geometric-based features are optimized by PSO with ensemble classifier optimization by the genetic algorithm. Using this approach, we have obtained promising results in terms of the classification error rate and computation time minimization. Moreover, our optimized feature-based method …

Work-Of-Indentation As A Means To Characterize Indenter Geometry And Load-Displacement Response Of A Material, Kaushal K. Jha, Shuo Zhang, Nakin Suksawang, Ton-Lo Wang, Arvind Agarwal

Mechanical and Civil Engineering Faculty Publications

Normalized indentation works, referred to as the total and elastic energy constants, have been shown to be effective in the representation and analysis of experimental load-displacement data. However, their physical meaning, influencing factors, variation range and relationships with other nanomechanical quantities are not precisely known. In this study, the load-displacement data obtained as a result of simulations of elastic and elastoplastic indentations are extensively analyzed to enhance our understanding concerning these two energy based parameters. It has been shown that while the total energy constant describes the state of an indenter tip and the type of contact regime, the elastic …

Proceedings Of The Nebraska Academy Of Sciences: Aeronautics And Space Science

Nebraska Academy of Sciences: Programs and Proceedings

Variability on AGN Absorption Lines Based on Hubble Space Telescope/COS Data

BALQSO Kinetic Luminosity Determination with C III* Measurements

Brewster Angle Microscopy and Characterizations of Langmuir Films

Sorting Light’s Total Angular Momentum for Communication Systems

The Phosphorylation Pattern of RPA2, in Response to Double-strand Breaks, Differs Depending on the Location in the Cell and the Phase of the Cell Cycle

The Diophantine Equation Ax⁴ + By⁴ = Cz⁴ in Quadratic Fields

The SBML Standard to Share Computational Models of Biological Systems

High Speed Electro-discharge Drilling and Wire Electrode-discharge Machining of Titanium Alloys for Aerospace Applications

Routing over …

Proceedings Of The Nebraska Academy Of Sciences: Anthropology

Nebraska Academy of Sciences: Programs and Proceedings

Presentations

A Marxist Approach to US Historical Archaeology: A Review and Summary of the History and Application of Marxism on the Field of Historical Archaeology in the US

John Collier, Anthropology, and the Indian New Deal

Colonoware and Culture: The Changing Interpretation of 17th Century Ceramic Traditions in the South Eastern United States

Creole Cottages and Garden Estates: Space and Purpose in Early New Orleans

Quality Control for In-field Photography: Digital Curationa and Non-collections of Artifacts

Assesing Lithics through Color Metrics

Refitting of Stone Artifacts Using Colorimetric Analysis

The Restroer of the Republic: An Analysis of Augustus’s Social, Moral, and …

Program And Proceedings: Nebraska Academy Of Sciences 1880–2013, 133rd Anniversary Year, One Hundred-Twenty-Third Annual Meeting

Nebraska Academy of Sciences: Programs and Proceedings

Aeronautics and Space Science

Collegiate Academy: Biology

Biological and Medical Sciences

Nebraska Chapter, National Council for Geographic Education

Chemistry and Physics

Collegiate Academy: Chemistry and Physics

Junior Academy, Senior High Competition

Aeronautics and Space Science, Poster Session

Anthropology

Nebraska Wesleyan University Health and Sciences Graduate School Fair

Aeronautics and Space Science, Poster Session

Maiben Memorial Lecture: Making People Smarter Using "Habits of Mind," Bob Feurer, North Bend High School

Collegiate Academy: Biology

Teaching of Science and Math

Applied Science and Technology

Junior Academy, Junior High Competition

Extracting Fuzzy Rules For The Diagnosis Of Breast Cancer, Ali̇ Keleş, Aytürk Keleş

Turkish Journal of Electrical Engineering and Computer Sciences

About one million women are diagnosed with breast cancer every year. Breast cancer makes up one-third of all cancer diagnoses in women. Diagnosing breast cancer early is vital for successful treatment. Among the breast cancer screening methods available today, mammography is the most effective, although the low precision rate of breast biopsy caused by mammogram interpretation results in approximately 70% unnecessary biopsies with benign outcomes. The aim of this study was to extract strong diagnostic fuzzy rules for the inference engine of an expert system to be used for the diagnosis of breast cancer. These rules have been extracted through …

Multireference Tdoa-Based Source Localization, Hamid Torbati Fard, Mahmoud Atashbar, Yaser Norouzi, Farrokh Hojjat Kashani

Turkish Journal of Electrical Engineering and Computer Sciences

Time difference of arrival (TDOA)-based methods usually achieve the most accurate source localization in passive systems. In these methods, one of the sensors is assigned as the reference and the TDOA of the others with respect to the reference is measured. The source location is estimated by processing these TDOAs. In this paper, a multireference maximum likelihood (ML)-Taylor algorithm is proposed in order to decrease the source localization error of the TDOA methods. In the proposed algorithm, TDOAs are measured assuming 2 different reference sensors, and then the ML objective function of this multireference TDOA algorithm is derived and solved …

A New Versatile Electronic Speckle Pattern Interferometer For Vibration Measurements, Viswanath Bavigadda

Doctoral

Electronic speckle pattern interferometry (ESPI) has been widely used for vibration amplitude and phase measurements. Conventional ESPI systems are bulk and expensive and need careful alignment of all the optical components which is a time consuming task. To overcome these problems alternative compact ESPI systems were developed using fibre-optical components or holographic optical elements (HOEs). The fibre-optic based ESPI systems suffer from random phase fluctuations induced by environmental temperature changes. Hence HOEs can be used as more powerful alternative optical elements to design ESPI systems. The time average ESPI method is widely used for vibration studies. The time average method …

The Effects Of Hydrostatic Pressure On Early Endothelial Tubulogenic Processes, Ryan M. Underwood

Theses and Dissertations--Biomedical Engineering

The effects of mechanical forces on endothelial cell function and behavior are well documented, but have not been fully characterized. Specifically, fluid pressure has been shown to elicit physical and chemical responses known to be involved in the initiation and progression of endothelial cell-mediated vascularization. Central to the process of vascularization is the formation of tube-like structures. This process—tubulogenesis—is essential to both the physiological and pathological growth of tissues. Given the known effects of pressure on endothelial cells and its ubiquitous presence in the vasculature, we investigated pressure as a magnitude-dependent parameter for the regulation of endothelial tubulogenic activity. To …

Chemical Weathering And Mobility Of Inorganic Species In Dry Disposed Ash: An Insight From Geochemical Fractionation And Physicochemical Analysis, S.A. Akinyemi, W.M. Gitari, A. Akinlua, L.F. Petrik

Coal Combustion and Gasification Products Journal Archive

The burning of low-grade coal produces vast amounts of ash and other solid by-products. In South Africa, coal combustion by-products undergo disposal on land as dry heaps or slurried to dams. In this study, the geochemical partitioning, transport, and mobility of elements in dry disposed ash dumps were investigated using a modified sequential extraction scheme. The chemical and mineralogical compositions of 50 drilled core samples were investigated by X-ray fluorescence (XRF), X-ray diffraction (XRD), and inductively coupled plasma mass spectrometry. Ternary plots of major elements as determined by XRF showed that the 15-year-old and 2-week-old dry disposed ashes are sialic, …