Engineering Commons^™

Fuctional Properties Of Phthalocyanine Dye Based Inks, Yumeizhi Jia

Masters Theses

Currently, inkjet printing techniques are getting more attention. They have the features of non-contact and additive patterning feasibility, compatibility with different substrates (the materials on which the ink is printed), low temperature processing, and low cost (1) (2). They can be used for patterning solution processable polymers or nanoparticle inks on various substrates including conductive materials, paper and glass (3). The need for proper functional inks is increasing every year. The goal of my work was to formulate a phthalocyanine water based ink, which can work as a dielectric ink. In my research, all the materials which were used to …

Evaluation Of Point Cloud Data Dispersion With Relation To Point Cloud Density Under Field Conditions, Ling Kit Kong

Masters Theses

3D laser scanning is a non-contact imaging technology that can rapidly capture a surface of an object and produce a point cloud representation of that surface. For the purpose of bridge condition assessment, the 3D laser scanner is capable of capturing a global scan of a bridge. With the point cloud data, a 3D CAD model of the bridge can be obtained representing the in-service conditions. Properly developed CAD models can be used for developing structural models and documenting condition data. However, accurate CAD models heavily depend on the level of accuracy of the scan data collected under field conditions. …

Emg-Emg Coherence Analysis Of Elbow And Shoulder Muscles, Manu Stephen

All Theses and Dissertations (ETDs)

Motor coordination can be described by the activation of a few intermuscular coordination patterns, or muscle synergies. Muscle synergy can be defined as a relatively fixed pattern of activation across a set of muscles. The neural mechanisms underlying muscle synergies remain to be fairly unknown. Through a muscle synergy study [13], co-activation in muscle pairs was discovered through a non-negative matrix factorization: NMF) analysis. In order to evaluate the same muscles under the frequency domain, coherence analysis: a correlational method) was used. Additionally, a comparison can be made to determine if the resulting muscle pairs overlap with the muscle pairs …

Pyrolysis Of Acrylonitrile-Butadiene-Styrene (Abs) Under High Heat Flux Conditions, James R. Wilson

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Acrylonitrile-butadiene-styrene (ABS) is a common industrial plastic that is widely used for structural and piping applications. Additionally, within the past decade ABS has become the most popular material used in a type of rapid prototyping known as fused- deposition modeling (FDM). Within the past three years, ABS plastic blends have also been investigated as a potential fuel for hybrid- and solid-propelled rocket systems, exhibiting promising results. Because the use of ABS as a rocket propellant is very recent, a pyrolysis database, describing how ABS will burn, at the temperatures and heating rates experienced by rocket systems does not exist. Previous …

Single Case Research Designs: An Effective And Efficient Methodology For Applied Aviation Research, Geoffrey R. Whitehurst

Dissertations

The purpose of this three-paper dissertation is to examine the potential of single case research designs (SCDs) as an appropriate and efficient experimental design for use in applied aviation research. In the current environment of dwindling resources, funding for experiments requiring large sample sizes, a normal requirement for between-group designs, is becoming difficult to find. However, the need to improve safety within the aviation industry is an ongoing requirement, especially as advances in technology continue have an impact on how the industry operates. SCDs are experimental designs that require very few participants and therefore have the potential to save time …

An Inter-Domain Supervision Framework For Collaborative Clustering Of Data With Mixed Types., Artur Abdullin

Electronic Theses and Dissertations

We propose an Inter-Domain Supervision (IDS) clustering framework to discover clusters within diverse data formats, mixed-type attributes and different sources of data. This approach can be used for combined clustering of diverse representations of the data, in particular where data comes from different sources, some of which may be unreliable or uncertain, or for exploiting optional external concept set labels to guide the clustering of the main data set in its original domain. We additionally take into account possible incompatibilities in the data via an automated inter-domain compatibility analysis. Our results in clustering real data sets with mixed numerical, categorical, …

Kinematic Synthesis Of Planar, Shape-Changing, Rigid Body Mechanisms For Design Profiles With Significant Differences In Arc Length, Shamsul A. Shamsudin, Andrew P. Murray, David H. Myszka, James P. Schmiedeler

Mechanical and Aerospace Engineering Faculty Publications

This paper presents a kinematic procedure to synthesize planar mechanisms capable of approximating a shape change defined by a general set of curves. These “morphing curves,” referred to as design profiles, differ from each other by a combination of displacement in the plane, shape variation, and notable differences in arc length. Where previous rigid-body shape-change work focused on mechanisms composed of rigid links and revolute joints to approximate curves of roughly equal arc length, this work introduces prismatic joints into the mechanisms in order to produce the different desired arc lengths. A method is presented to iteratively search along the …

Finite Element Analysis Of Frp Debonding Failure At The Tip Of Flexural/Shear Crack In Concrete Beam, Tayyebeh Mohammadi, Baolin Wan, Kent Harries

Civil and Environmental Engineering Faculty Research and Publications

One of the most common failure modes of strengthened RC beams with externally bonded FRP is intermediate crack (IC) debonding of FRP initiated at the tip of flexural/shear cracks. This study presents a method, using extended finite element method (XFEM), to model IC debonding in an FRP-strengthened concrete beam. In XFEM, as soon as a damage initiation criterion is reached in an element, additional degrees of element freedom are added to model crack initiation. Crack propagation is then modeled using fracture energy criterion. This method can be used to simulate debonding failure along an arbitrary, solution-dependent path without the requirement …

Heavy Vehicle Performance During Recovery From Forced-Flow Urban Freeway Conditions Due To Incidents, Work Zones And Recurring Congestion, Alexander Drakopoulos, Yue Liu, Alan Horowitz

Civil and Environmental Engineering Faculty Research and Publications

Information contained in the Highway Capacity Manual on the influence heavy vehicles have on freeway traffic operations has been based on few field data collection efforts and relied mostly on traffic simulation efforts. In the 2010 Manual heavy vehicle impact is evaluated based on “passenger car equivalent” values for buses, recreational vehicles and trucks. These values were calibrated for relatively uncongested freeway conditions (levels of service A through C) since inadequate field data on heavy vehicle behavior under congested conditions were available. A number of field data collection efforts, that were not included in deriving the passenger car equivalent values …

Analysis Of Social Networks In A Virtual World, Gregory Thomas Stafford

Graduate Theses and Dissertations

As three-dimensional virtual environments become both more prevalent and more fragmented, studying how users are connected via their avatars and how they benefit from the virtual world community has become a significant area of research. An in-depth analysis of virtual world Social networks is needed to evaluate how users interact in virtual worlds, to better understand the impact of avatar Social networks on the virtual worlds, and to improve future online Social networks.

Our current efforts are focused on building and exploring the Social network aspects of virtual worlds. In this thesis, we build a Social network of avatars based …

Zinc Oxide Nanorod Based Ultraviolet Detectors With Wheatstone Bridge Design, Arun Vasudevan

Graduate Theses and Dissertations

This research work, for the first time, investigated metal semiconductor-metal (MSM) zine oxide (ZnO) nanorod based ultra-violet (UV) detectors having a Wheatstone bridge design with a high

responsivity at room temperature and above, as well as a responsivity that was largely independent of the change in ambient conditions. The ZnO nanorods which acted as the sensing element of the detector were grown by a chemical growth technique. Studies were conducted to determine the effects on ZnO nanorod properties by varying the concentration of the chemicals used for the rod growth. These studies showed how the rod diameter and the deposition …

A Solar-Powered And Multi-Tiered Mesh Node For A Portable In Situ Emergency Response System, Adam Matthews

Graduate Theses and Dissertations

The aftermath of a natural disaster is typically characterized by lack of a reliable medium for dissemination of information to survivors. Current state-of-the-art emergency response systems rely on satellite radio-enabled devices, but survivors, unlike first responders, do not have access to such devices. To mitigate this problem, we present PERPETUU a solar-powered portable GIS microserver. The microserver node can be deployed in a disaster scene, and can serve maps to survivors viewable on browsers of off-the-shelf mobile systems. A key innovation in the design of the PERPETUU node is a multi-tiered hardware architecture-the system combines a low-power micro-controller, a medium-power …

Use Of Polymer Rapid Tools As Functional Injection Mold Tooling, Sean Derrick

Masters Theses

Conventional tool making for injection molded plastics is expensive, time consuming, and generates a great deal of waste. Presently, industry is waiting for what is commonly referred to as Rapid Tooling (RT). The greatest opportunity for RT implementation would be the use of Additively Manufacturing (AM) technology. Specifically, AM techniques which use a high strength polymer resin substrate.

The following research is an initial feasibility study to determine if Polymer Rapid Tools (PRTs) could be used as functional injection mold tooling. The objective of the research was to determine if a PRT could mold a variety of features to a …

Effects Of Time Varying Background Noise Conditions On Human Perception And Performance, Andrew H. Hathaway

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

This thesis was designed to study the effects of changing noise conditions on human perception and performance. In two phases, participants were exposed to a number of noise conditions and their performance on an arithmetic task involving short-term memory was monitored and their subjective perception of noise conditions was collected via questionnaires.

In the first phase, participants were tested while being subjected to RC-29(H) and RC-47(RV) conditions created by broadband noise fluctuating on different time intervals, resembling the changing noise conditions potentially found in modern HVAC systems. These intervals varied from two minutes to ten minutes. Results show a significant …

New Fault Tolerant Multicast Routing Techniques To Enhance Distributed-Memory Systems Performance, Masoud Esmail Masoud Shaheen

Dissertations

Distributed-memory systems are a key to achieve high performance computing and the most favorable architectures used in advanced research problems. Mesh connected multicomputer are one of the most popular architectures that have been implemented in many distributed-memory systems. These systems must support communication operations efficiently to achieve good performance. The wormhole switching technique has been widely used in design of distributed-memory systems in which the packet is divided into small flits. Also, the multicast communication has been widely used in distributed-memory systems which is one source node sends the same message to several destination nodes. Fault tolerance refers to the …

Second-Order Perturbation Analysis Of The St. Venant Equations In Relation To Bed-Load Transport And Equilibrium Scour Hole Development, Frans Joseph Lambrechtsen

Theses and Dissertations

This analysis is an expansion of research done by Rollin Hotchkiss during his Ph.D work. The research uses fluid flow, sediment transport, and perturbation theory to predict where scour will occur in a variable-width channel. The resulting equations also determine equilibrium scour depth based upon the stream bed elevation derived from a dimensionless bed slope equation. Hotchkiss perturbed the width of the channel using a second order Taylor Series perturbation but neglected second order terms. The present work follows the same procedures as Hotchkiss but maintains the second order terms. The primary purpose is to examine how the additional terms …

Deicer Usage On Concrete And Asphalt Pavements In Utah, Chase David Thomas

Theses and Dissertations

The objectives of this research were to 1) compile winter maintenance data for the Utah Department of Transportation (UDOT) to directly compare concrete and asphalt pavements with regards to deicer usage and 2) determine if there is a statistical difference in deicer usage on concrete and asphalt pavements. To this end, three data sources were consulted for this research: Material Maintenance Quality Assurance (MMQA) database, UDOT road database, and Google Maps. The final compiled data set prepared for analysis in this research contained deicer quantities by deicer type, pavement surface areas by pavement material type, traffic, longitude, latitude, and elevation …

Burnout, No, Flame Temperature, And Radiant Intensity From Oxygen-Enriched Combustion Of A Hardwood Biomass, Joshua David Thornock

Theses and Dissertations

Increasing concern for energy sustainability has created motivation for the combustion of renewable, CO2 neutral fuels. Biomass co-firing with coal provides a means of utilizing the scaled efficiencies of coal with the lower supply availability of biomass. One of the challenges of co-firing is the burnout of biomass particles which are typically larger than coal but must be oxidized in the same residence time. Larger biomass particles also can increase the length of the radiative region and alter heat flux profiles. As a result, oxygen injection is being investigated as a means of improving biomass combustion performance.An Air Liquide designed …

Water Fat Separation With Multiple-Acquisition Balanced Steady-State Free Precession Mri, Michael A. Mendoza

Theses and Dissertations

Magnetic resonance imaging (MRI) is an important medical imaging technique for visualizing soft tissue structures in the body. It has the advantages of being noninvasive and, unlike x-ray, does not rely on ionizing radiation for imaging. In traditional hydrogen-based MRI, the strongest measured signals are generated from the hydrogen nuclei contained in water and fat molecules.Reliable and uniform water fat separation can be used to improve medical diagnosis. In many applications the water component is the primary signal of interest, while the fat component represents a signal which can obscure the underlying pathology or other features of interest. In other …

Characterization And Processing Evaluation Of Starch/High-Density Polyethylene Materials In Extrusion Blow Molding, Bradley Dale Bacigalupi

Theses and Dissertations

The growing negative impacts of non-biodegradable plastics derived from non-renewable materials have created increasing interest throughout the world for new materials that are both biodegradable and renewable, that can be combined with or replace traditional plastics. Plant-based thermoplastic starch (TPS), a promising alternative material to traditional petroleum based resin, is both biodegradable and renewable and has great potential for use in plastic manufacturing processes. Two major obstacles that prevent more widespread use of TPS include; TPS base material, which is typically manufactured in a flake or powder, is incompatible with standard plastics production equipment that require pelletized resin, the second …

Interface Design And Synthesis For Structural Hybrid Microarchitectural Simulators, Zhuo Ruan

Theses and Dissertations

Computer architects have discovered the potential of using FPGAs to accelerate software microarchitectural simulators. One type of FPGA-accelerated microarchitectural simulator, namedthe hybrid structural microarchitectural simulator, is very promising. This is because a hybrid structural microarchitectural simulator combines structural software and hardware, and this particular organization provides both modeling flexibility and fast simulation speed. The performance of a hybrid simulator is significantly affected by how the interface between software and hardware is constructed. The work of this thesis creates an infrastructure, named Simulator Partitioning Research Infrastructure (SPRI), to implement the synthesis of hybrid structural microarchitectural simulators which includes simulator partitioning, simulator-to-hardware …

Window Thermal Performance Optimization In The Government Built Emirati Family House-Abu Dhabi Emirate., Tareq I.A Abuimara

Theses

Presently, the United Arab Emirates (UAE) has one of the world’s largest energy consumption per capita, with the building sector accounting for 70% of the consumed energy, primarily used for cooling. In the last three decades, the UAE government launched several housing programs that fit the needs of Emirati beneficiaries while recently targeting also energy efficiency.

This study aims at optimizing the window thermal performance in relation to orientation in a typical house within a representative governmental housing program. Often enough, housing orientation is governed by urban planning layout, where windows rarely show any adapted heat control treatment in relation …

Biodegradation Of Cresols Using Pseudomonas Putida Immobilized In Poly Vinyl Alcohol (Pva) Gel, Riham Mohamed Sorkatti Abu Bakr

Theses

The characteristics and viability of polyvinyl alcohol (PVA) as a support material for biomass immobilization and utilization for the biodegradation of cresols have been evaluated. PVA gel pellets were prepared by repeated freezing-thawing method using different PVA compositions. The porous structures of the PVA pellets were examined using a Compound Microscope and SEM and revealed that the matrix structure and pore size distribution were affected by PVA composition. Mechanical properties of the PVA gel were also characterized to evaluate the PVA integrity as a matrix for immobilizing microbial cells and found to be dependent on the PVA mass composition. The …

Role Of Air Gap In Scrap Dissolution Process, Ajay Kumar Shukla, Brahma Deo, D. G.C. Robertson

Materials Science and Engineering Faculty Research & Creative Works

The role of the air gap formed between scrap and a solidified metal shell at the beginning of the scrap dissolution process has been investigated. The effect of air gap has been investigated for different Biot numbers (10 to 100) and ratios of air gap to liquid melt heat transfer coefficient (0.1 to 0.9). The predictions of the mathematical model are compared with the experimental results reported elsewhere. The role of air gap is found to be significant only for low Biot numbers (< 50) and for low ratios of air gap to liquid melt heat transfer coefficient (< 0.25). © 2013 The Minerals, Metals & Materials Society and ASM International.

Design And Fabrication Of An Infrared Optical Pyrometer Asic As A Diagnostic For Shock Physics Experiments, Jared Gordon

UNLV Theses, Dissertations, Professional Papers, and Capstones

Optical pyrometry is the sensing of thermal radiation emitted from an object using a photoconductive device to convert photons into electrons, and is an important diagnostic tool in shock physics experiments. Data obtained from an optical pyrometer can be used to generate a blackbody curve of the material prior to and after being shocked by a high speed projectile. The sensing element consists of an InGaAs photodiode array, biasing circuitry, and multiple transimpedance amplifiers to boost the weak photocurrent from the noisy dark current into a signal that can eventually be digitized. Once the circuit elements have been defined, more …

Solutions To Finite Horizon Cost Problems Using Actor-Critic Reinforcement Learning, Ivo Grondman, Hao Xu, Sarangapani Jagannathan, Robert Babuska

Electrical and Computer Engineering Faculty Research & Creative Works

Actor-critic reinforcement learning algorithms have shown to be a successful tool in learning the optimal control for a range of (repetitive) tasks on systems with (partially) unknown dynamics, which may or may not be nonlinear. Most of the reinforcement learning literature published up to this point only deals with modeling the task at hand as a Markov decision process with an infinite horizon cost function. In practice, however, it is sometimes desired to have a solution for the case where the cost function is defined over a finite horizon, which means that the optimal control problem will be time-varying and …

Modeling Of Crosstalk Between Two Nonparallel Striplines On Adjacent Layers, Songping Wu, Jun Fan

Electrical and Computer Engineering Faculty Research & Creative Works

Crosstalk between two nonparallel strip lines on adjacent layers is investigated. An equivalent per unit length model for nonparallel lines is developed based on multiconductor transmission line theories and the Nelder-Mead optimization algorithm. The physical meaning of the equivalent model is explained for different test geometries. Empirical formulas, as functions of various geometric parameters, are derived based on multivariable curve fitting for a set of defined trace geometries. The validity of the empirical model is confirmed through comparison with different test examples. © 2013 IEEE.

Laboratory Testing Of Railroad Flatcars For Use As Highway Bridges On Low-Volume Roads To Determine Ultimate Strength And Redundancy, Teresa L. Washeleski, Robert Connor, Jason B. Lloyd

Indiana Local Technical Assistance Program (LTAP) Technical Reports

Railroad flatcars (RRFCs) are a convenient option to replace existing deteriorating bridge structures on low-volume roads. They are typically used as the bridge superstructure by placing two or more flatcars side-by-side to achieve the desired bridge width. Utilizing RRFCs as a bridge allows for rapid construction and greater cost savings compared to traditional practices. These benefits make them an attractive solution for rural communities in Indiana, as well as other states.

Uncertainty remains about the response under higher loads than could be easily achieved in the field and the level of redundancy of railroad flatcar bridges. Using RRFCs as bridges …

A Simple Method For Estimation Of Queue Length, S. P. Anusha, Lelitha Devi Vanajakshi, Anuj Sharma

Department of Civil and Environmental Engineering: Faculty Publications

Urban arterials are characterized by frequent intersections. Queue length and delay are the two primary measures of performance of intersection. These measures play a primary role in determining the arterial performance. This article presents a methodology to determine the number of vehicles in queue at a signalized intersection for under saturated traffic conditions. The results obtained were validated using actual values that are manually extracted. The root-mean-square error is of the range 1.3 vehicles for estimation of number of vehicles in queue. The various aspects that have to be considered in accurate estimation of performance measures are also discussed.

Pulsatile Flow Does Not Improve Efficacy In Ex Vivo Lung Perfusion., Keith A. Zoeller

Electronic Theses and Dissertations

Introduction Ex vivo lung perfusion (EVLP) has the potential to increase the donor pool for lung transplantation by facilitating extended evaluation of marginal organs. Current methodology employs continuous flow pumps for perfusion. In vivo, continuous flow has been shown to increase pulmonary vascular resistance (PVR). Thus, pulsatile flow EVLP may reduce PVR and improve organ preservation by providing physiologic flow morphology. Methods Lung blocks harvested from male, Yorkshire pigs were allocated into continuous (CF, n=3) and pulsatile flow (PF, n=4) groups. Lungs were ventilated at 4-5 mL/kg, 30% FiO2 and perfused with an acellular, albumin-based solution corrected for osmolarity, acid/base …