Engineering Commons^™

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• Online MSCS Receives Top Rankings

A Race Vehicle Data Acquisition System, B. Taylor Newill, Dr. Mark Colton

Journal of Undergraduate Research

The Society of Automotive Engineers hosts the annual Formula SAE student design competition. This year 70 teams will design, build, and race a one man, open-wheeled road racer. Formula SAE is considered by many to be the most prestigious university engineering design competition in the world. For the first time, a team of undergraduate BYU students will participate in the Formula SAE competition.

Computer Modeling And Mapping Of Ultrasound Intensity In Human Tissues For Gene And Drug Delivery, Spencer Smith, Dr. William Pitt

Journal of Undergraduate Research

Over the past years ultrasound has been used extensively in medical treatments. It is now being developed and tested in localized drug and gene delivery. One of the main applications for drug delivery is treating cancer.

Nanoemulsions Of Non-Toxic Fluorocarbon Liquids Used To Transfect Genes With Applied Ultrasound, Cody L. Martin, Dr. William Pitt

Journal of Undergraduate Research

Gene delivery has been an important topic of medical and scientific research today, due to its potential in aiding the fight against cancer, heart disease and many genetic disorders. By transfecting appropriate genes into diseased cells, specific proteins can be produced that will alleviate problems at the cellular level. In addition, if the gene delivery is done by a targeted non-viral approach, such as ultrasound combined with contrast agent bubbles, the efficiency of transfection always increases. The targeted non-viral approach consists of applying focused ultrasound to a specific tissue in the presence of microbubbles. The application of ultrasound will cause …

Semi-Automated Curation Of Metabolic Models Via Flux Balance Analysis: A Case Study With Mycoplasma Gallisepticum, Eddy J. Bautista, Joseph Zinski, Steven M. Szczepanek, Erik L. Johnson, Edan R. Tulman, Steven J. Geary, Ranjan Srivastava

Open Access Author Fund Awardees' Articles

Primarily used for metabolic engineering and synthetic biology, genome-scale metabolic modeling shows tremendous potential as a tool for fundamental research and curation of metabolism. Through a novel integration of flux balance analysis and genetic algorithms, a strategy to curate metabolic networks and facilitate identification of metabolic pathways that may not be directly inferable solely from genome annotation was developed. Specifically, metabolites involved in unknown reactions can be determined, and potentially erroneous pathways can be identified. The procedure developed allows for new fundamental insight into metabolism, as well as acting as a semi-automated curation methodology for genome-scale metabolic modeling. To validate …

2013 Fall Engr333 Project Assignment, Matthew K. Heun

ENGR 333

The Fall 2013 ENGR333 project focused on production and use of biofuels at Calvin University.

I asked the students “What would it take for Calvin College to operate a biofuel vehicle from campus resources?”

Customer

The customer for this project was Calvin’s Physical Plant director Phil Beezhold.

Design Optimization Of An Above-Knee Prosthesis With Energy Regeneration, Taylor Barto, Holly Warner, Rick Rarick, Dan Simon

Undergraduate Research Posters 2013

Above-knee amputees who use a prosthetic leg typically have to compensate for its shortcomings with unnatural hip motions. This compensation eventually leads to adverse health issues such as arthritis. We propose an active prosthesis to improve performance. The motor in our prosthetic knee allows the patient to move his hip normally, thus reducing the possibility of ancillary health issues. To improve the efficiency of the prosthesis, we use the braking phase of the prosthesis to regenerate energy. By storing energy in a supercapacitor during braking, the prosthesis lasts longer between each charge than it would without regenerative braking. We are …

Adaptation Of Scenedesmus Dimorphus To Brackish Water, Dustin Bowden, Joanne M. Belovich

Undergraduate Research Posters 2013

Microalgae is a promising biofuel feedstock for replacement of conventional transportation fuels. Microalgae does not require arable land for cultivation, and the biofuel production rate per acre of land is an order of magnitude greater than that needed for crop-based production methods. Though microalgae to biofuel processes are attractive, none have proven commercially successful due to the high costs of algae dewatering. Moreover, the scarcity of fresh water in many parts of the world prevents development of this process because of competition with drinking water supplies. Our lab has developed an efficient dewatering method using an inclined gravity settler. It …

Using Ultrasonic Pulse Velocity (Upv) To Predict Properties And Performance Of Pervious Concrete, Jeremy Adato, Norbert Delatte

Undergraduate Research Posters 2013

Pervious concrete is a type of porous portland cement concrete with interconnected voids. This material has been increasingly used to reduce the amount of stormwater runoff from paved areas. It has also been shown to improve the water quality near low volume and low speed pavements as well as in parking lots. Due to the low compressive strength of pervious concrete associated with the high void content, it currently is not used in highway structures except perhaps as an overlay for conventional concrete pavement. The large, open pore structure of this material allows water to pass through its structure, thereby …

A Model For Transforming Engineering Education Through Group Learning, Shannon Chance, Gavin Duffy, Brian Bowe, Mike Murphy, Tony Duggan

Conference papers

Electrical engineering educators at Technological University Dublin (DIT) have successfully implemented pedagogical change. They now use group-based, student-centered and inquiry-driven approaches to teach emerging engineers. The objective of this was to foster students’ personal as well as professional skills (i.e., teamwork, communication, self-directed learning, etc.). This paper explores how such change was achieved and provides graphic models that draw from prior phenomenological studies and incorporates aspects of Rogers’ (1962) product adoption curve and Lowe’s (2012) interpretations of it.

Merging Creative Design And Cad Learning Activities In A Product Design Programme, Pearl O'Rourke, Colm O'Kane, Leslie Smith, Michael Ring

Conference Papers

Traditional learning and teaching methods for creativity differ from those used in a scientific context. Although the creative process can benefit from a certain level of prescription and structural constraint - with time allocated to research, problem definition, conceptualisation and idea development - flexibility and fluidity are necessary for creative innovation. In contrast, the more linear and rigid pedagogies associated with science and engineering education facilitate efficient learning of subjects such as those based on software packages, manufacturing and materials theory or mechanics. This paper describes the development of a project which aims to establish constructive links between the learning …

Issues In Organisation And Management Of Multidisciplinary Group Design Projects, Ken Keating, Claire Brougham, Graham Gavin, Ger Reilly

Conference Papers

No abstract provided.

Eu-Optimus – A Case Study Of A Holistic Systems-Approach Pedagogy In Technology Education, Ciara Ahern, Mark Mcgrath

Conference papers

Engineers and product designers are concerned with the design, development, implementation and operation of a wide range of systems. If a system is to perform optimally, all of the component parts must communicate and cooperate effectively. Technologists must therefore have an appreciation for both, the functionality of a single component of that system and the interoperability, or impact of that component within the context of the system. Scientific first principles underpin all aspects of technical education. The application of scientific knowledge at component level impacts at system level. Practical or laboratory-based activity has long been used as a complimentary pedagogy …

Mitigating Event Confidentiality Violations In Smart Grids: An Information Flow Security-Based Approach, Thoshitha T. Gamage, Thomas P. Roth, Bruce M. Mcmillin, Mariesa L. Crow

Computer Science Faculty Research & Creative Works

Modern smart grids, by and large, merge physical interconnections and cyber controllers. Invariably, this tight coupling results in cyber commands manifesting in the physical layer as observable changes, leading to possible disclosure of sensitive system settings. Thus, cyber event confidentiality of the smart grid is violated. Attacks on confidentiality can ultimately lead to integrity and availability attacks; with adequate knowledge of the system topology, internal settings, and how the physical layer responds to cyber commands, a malicious adversary gains knowledge to attack the system. This work shows how to develop self-obfuscating systems based on information flow security properties that can …

Additivity Of Strengthening Mechanisms In Ultrafine Grained Al-Mg-Sc Alloy, N. Kumar, R. S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

In the light of unique and anomalous properties of ultrafine grained (UFG) alloys, an effort was made to develop a predictive capability of the yield strength (YS) of UFG Al-Mg-Sc alloy. UFG microstructure was introduced using friction stir processing. Microstructural characterization of grain size, dislocations, and nano-sized Al3(Sc,Zr) particles was carried out using electron backscatter diffraction and transmission electron microscope. The contribution from Peierls-Nabarro stress, solid solution strengthening, precipitation strengthening, grain boundary strengthening, and dislocation strengthening were assessed using existing strengthening models. Additivity law to predict the YS of the alloy was chosen based on the microstructural state of the …

Characterization Of Secondary Organic Aerosol Precursors Using Two-Dimensional Gas Chromatography With Time Of Flight Mass Spectrometry (Gc×Gc/Tofms), Melissa Jordan Roskamp

Dissertations and Theses

The oxidation of volatile organic compounds (VOCs) plays a role in both regional and global air quality through the formation of secondary organic aerosols (SOA). More than 1000TgC/yr of non-methane VOCs are emitted from biogenic sources (significantly greater than from anthropogenic sources). Despite this magnitude and potential importance for air quality, the body of knowledge around the identities, quantities and oxidation processes of these compounds is still incomplete (e.g., Goldstein & Galbally, 2007; Robinson et al., 2009). Two-dimensional gas chromatography paired with time-of-flight mass spectrometry (GC×GC/TOFMS) is a powerful analytical technique which is explored here for its role in better …

Current Best Practices For High Performance, Deep Energy Retrofits In Florida Affordable Housing, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

In the fall of 2009, researchers at the Florida Solar Energy Center (FSEC) began working with affordable housing entities that were conducting major renovation projects in unoccupied, foreclosed homes. The study was funded by the Florida Energy Systems Consortium and the U.S. Department of Energy's Building America program. When components and equipment were being replaced because they were worn out, researchers provided savings projections for higher-efficiency choices. Savings were also projected for improvements that were strictly for energy efficiency, such as adding ceiling insulation. The best practices summarized in this document are a mixture of assessment, design, specification, quality assurance, …

Progressing Bicycle Design For People With Hip Disarticulation, Luke Rasmussen, Dr. Mark Colton

Journal of Undergraduate Research

People with hip disarticulation are those who have had a leg surgically removed above the hip, taking away every muscle and movement in one of their limbs. A surgery of this type makes it extremely difficult for its recipients to lead an active lifestyle. This project aimed to design a bicycle for use by people with hip disarticulation, thus enabling them to maintain an active and healthy lifestyle despite their obstacles.

Vapor Deposition Methods For Synthetic Vocal Fold Modeling, Mitchell Hortin, Dr. Scott Thomson

Journal of Undergraduate Research

The purpose of this project was to develop a reliable method to create the epithelial layer of silicone rubber vocal fold models. The method needed be able to repeatedly create a uniform layer of silicone rubber that is 70-80 microns in thickness. The type of silicone rubber used was to have similar or identical properties to the type currently in use. In an attempt to accomplish this purpose, three types of nozzles, an ultrasonic mist maker and an airbrush were tested to see if they could efficiently atomize the silicone mixture. This testing showed that the airbrush setup has the …

A New Design For Low Voltage Microfluidic Pumps (Pulse Driven Electro-Osmotic Pumps With 3d Configuration For Uniform Size Microelectrodes), Nathan Ives, Dr. Aaron Hawkins

Journal of Undergraduate Research

The purpose of this project is to test a new design for low voltage microfluidic pumps. Mechanical pumps are sometimes too large, unreliable, or difficult to integrate in lab-on-a-chip applications. DC electro-osmosis is unsuitable for many biomedical and portable applications due to the high voltages needed. AC electro-osmosis has been proposed as an alternative because of the lower voltages it requires to pump fluids1, 2. Our design uses a 3D configuration for microelectrodes with alternating DC pulses that should produce a more linear flow of fluid and prevent “eddies” that occur in other ACEO pump designs3. This should result in …

Enabling Quantum Optics On A Chip, Thomas Wall, Dr. Aaron Hawkins

Journal of Undergraduate Research

Rubidium vapor has certain physical properties that allow it to be optically probed in order to produce many interesting quantum effects; however, due to its reactive nature rubidium can be very difficult to encapsulate. Historically bulk rubidium vapor cells have been used, which rely on high temperature glass forming and sealing. The potential that rubidium vapor has in real-world application can be greatly increased by creating a smaller, more versatile vapor cell that does not require high temperatures to be created. We are working to create a rubidium vapor cell that can be integrated with a chip-scale device in order …

Dynamic Shape Sensing Using A Fiber Bragg Grating Mesh, Douglas Bailey, Dr. Stephen Schultz

Journal of Undergraduate Research

Shape sensing is useful in a variety of applications including medicine, health monitoring of structures such as offshore oil vessels, windmills, spacecrafts, etc. Knowing an object’s shape allows evaluation of its condition during stress or its position in relation to other objects. One common method of shape sensing involves the use of Fiber Bragg gratings (FBG). FBGs have very high strain sensitivity and thus can be used to measure even the smallest changes in shape.

Judging Emotion From Low-Pass Filtered Naturalistic Emotional Speech, John Snel, Charlie Cullen

Conference papers

In speech, low frequency regions play a significant role in paralinguistic communication such as the conveyance of emotion or mood. The extent to which lower frequencies signify or contribute to affective speech is still an area for investigation. To investigate paralinguistic cues, and remove interference from linguistic cues, researchers can low-pass filter the speech signal on the assumption that certain acoustic cues characterizing affect are still discernible. Low-pass filtering is a practical technique to investigate paralinguistic phenomena, and is used here to investigate the inference of naturalistic emotional speech. This paper investigates how listeners perceive the level of Activation, and …

Design, Modeling And Development Of A Serial Hybrid Motorcycle With Hcci Engine, Yuh-Yih Wu, Chen Duan, Kai-Xian Hong, Hsien-Chi Tsai, Craig Hoff

Mechanical Engineering Publications

This paper discusses the design, modeling, and development of small motorcycle equipped with a HCCI engine in an series hybrid configuration. A mathematical model was developed using MATLAB/Simulink and used to size the powertrain components and to predict fuel economy. A conventional 125 cc spark ignition engine was modified to run in HCCI combustion mode and integrated into a prototype vehicle. Dual-fuel and external EGR strategies were used to upgrade the engine speed and torque capabilities of the engine to meet the requirements of the powertrain. An electrical generator, hub-motor, battery pack and other power electronics devices were used to …

Compression Properties And Damage Mechanisms Of Stitched Carbon/Epoxy Composites, Arief Yudhanto, Naoyuki Watanabe, Yutaka Iwahori, Hikaru Hoshi

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The effect of stitching on compression properties and damage mechanisms of carbon/epoxy composites is experimentally investigated. The waviness angle of load-bearing tows is also measured in both in-plane and out-of-plane directions, and a correlation is made between compression strength and the waviness angle. It is found that stitching generally reduces the compression strength of carbon/epoxy composites of up to 16%. The average compression strength has a stronger correlation with the in-plane waviness angle rather than the out-of-plane one. A comparative damage assessment, which studies the initiation, progression and final failure in stitched and unstitched composites under axial compression, reveals that …

High Yield-Displacement Frames For Earthquake Resistance, Daniel Miller, Dr. Paul Richards

Journal of Undergraduate Research

Since the early twentieth century, engineers have recognized the suitability of steel construction for design of earthquake resistant structures. Beginning in the 1990’s, building codes have provided specifications for seismic steel design that are intended to allow inelastic behavior while preventing catastrophic collapse (Hamberger, 2009). However, this inelastic response leads to permanent structural deformation which can require costly building repair or rehabilitation for continued use (Pettinga et al., 2007). A study conducted by Christopoulos and Pampanin (2004) proposes the use of a flexible secondary structural system to act in parallel with the main system in order to limit permanent deformation. …

A Characterization Of Force Patterns And Power Flow In The Golf Swing Using A Three Dimensional Model, Shad Roundy, Dr. Craig Smith

Journal of Undergraduate Research

Of the many specific studies published on the golf swing, few if any give a holistic mechanical understanding of the swing. The purpose of this study was to develop a holistic three dimensional model and characterize the force and power patterns in an elite golfer. Because of the emphasis in golf instruction on lower body motion, particularly the hip turn, particular attention was given to the relationship between the force generated in the lower body, and the resulting hip, trunk, and arm motion. This same model could be used in the future to more widely characterize force patterns of golfers …

The Radial Turbine: A Simple Encapsulation Of Its Design, Matthew B. Parkinson, Dr. Jordan J. Cox

Journal of Undergraduate Research

The design, manufacture, and testing of turbines involves many aspects of engineering: fluid mechanics, computer-aided design, computer-aided manufacturing, instrumentation, heat transfer, and optimitization. This project encapsulates these and provides for rapid design, manufacture, and testing of a prototype turbine wheel (figure 1). Although the models are simplified and do not address countless design considerations, they do provide a feel for the many issues encountered.

A Propane Oven For The Uros Islands, Jeffrey Perry, Dr. Randy Lewis

Journal of Undergraduate Research

High in the Andes Mountains lives a group of Peruvians who spend their lives on the Uros Islands of Lake Titicaca. To purchase supplies at the nearest city, Puno, islanders must take a 20 minute motorboat trip and 10 minute taxi ride. Because trips to the city are infrequent, islanders rarely have the opportunity throughout the week to eat fresh baked breads, meats and desserts. The oven building team from the Global Engineering Outreach Class (GEO) at Brigham Young University decided to design, build and implement a portable oven, heated by propane that could be easily used and manufactured by …

Characterization Of Wrist Kinetics During Activities Of Daily Living, Autumn Pando, Dr. Steven Charles

Journal of Undergraduate Research

Out of the 75,000 people afflicted with repetitive strain injuries annually in the U.S., 68% impair the wrist1. A major factor in these injuries is abnormal and excessive force. However, forces applied normally by the wrist in everyday environments are unknown. The purpose of this study is to quantify a detailed baseline of healthy, normal wrist forces used in activities of daily living (ADL). Once normal ranges are quantified, abnormal forces can be better identified, leading to more informed preventative designs and more personalized treatment options.