Engineering Commons^™

Research In Technology Education, Philip A. Reed (Editor), James E. Laporte (Editor)

STEMPS Faculty Books

Due to the laboratory-based nature of technology and engineering education programs, professionals in our field have often focused on the resources in our classrooms and laboratories and the instructional methodologies used to address specific concepts. Formal research into content and practice has often given way to “what seems right”. New curriculum is constantly being introduced (based on what is occurring in business and industry), yet the inclusion for those evolving concepts in courses and programs is typically not verified.

Hence, the importance of the 2010 CTTE yearbook and its focus on the dire need for an aggressive research agenda in …

Effluent Organic Nitrogen (Eon): Bioavailability And Photochemical And Salinity-Mediated Release, Deborah A. Bronk, Quinn N. Roberts, Marta P. Sanderson, Elizabeth A. Canuel, Patrick G. Hatcher, Rajaa Mesfioui, Katherine C. Filippino, Margaret R. Mulholland, Nancy G. Love

Chemistry & Biochemistry Faculty Publications

The goal of this study was to investigate three potential ways that the soluble organic nitrogen (N) fraction of wastewater treatment plant (WWTP) effluents, termed effluent organic N (EON), could contribute to coastal eutrophication - direct biological removal, photochemical release of labile compounds, and salinity-mediated release of ammonium (NH₄+). Effluents from two WWTPs were used in the experiments. For the bioassays, EON was added to water from four salinities (∼0 to 30) collected from the James River (VA) in August 2008, and then concentrations of N and phosphorus compounds were measured periodically over 48 h. Bioassay results, based …

Study Of Microstructure Effect On The Thermal Properties Of Yttria-Stabilized-Zirconia Thermal Barrier Coatings Made By Atmospheric Plasma Spray And Pressing Machine, Monica Bohorquez De Silva

LSU Doctoral Dissertations

Thermal barrier coatings (TBCs) are used in gas turbine engines to achieve a higher working temperature and thus lead to better efficiency. Yttria-Stabilized-Zirconia (YSZ), a material with low thermal conductivity, is commonly used as the top coat layer to provide the thermal barrier effect. In this dissertation the thermo-physical properties of a variety of TBCs samples made out of different fabrication techniques were investigated and compared. The first set of samples was fabricated using a pressing machine device to fabricate 0.5 inch diameter disk shaped YSZ-Al2O3 samples. The YSZ-Al2O3 powder mixture was made of 0, 1, 2, 3, 4 and …

Lattice Boltzmann Modeling For Shallow Water Equations Using High Performance Computing, Kevin Tubbs

LSU Doctoral Dissertations

The aim of this dissertation project is to extend the standard Lattice Boltzmann method (LBM) for shallow water flows in order to deal with three dimensional flow fields. The shallow water and mass transport equations have wide applications in ocean, coastal, and hydraulic engineering, which can benefit from the advantages of the LBM. The LBM has recently become an attractive numerical method to solve various fluid dynamics phenomena; however, it has not been extensively applied to modeling shallow water flow and mass transport. Only a few works can be found on improving the LBM for mass transport in shallow water …

Experimental And Numerical Analysis Of Fuel Cells, Abul Bashar Mahmud Hasan

LSU Doctoral Dissertations

Fuel Cells are attractive power source for use in electronic applications. Physical phenomena (water generation, saturation effect in fuel cell, poisoning, and thermal stress) are studied that governs the operation of a Proton Exchange Membrane Fuel Cell (PEMFC) and Solid Oxide Fuel cell (SOFC). Additionally, experimental studies and numerical simulations on PEMFC gas flow channel, the determination of the impact of the single channel fuel cell are presented. Furthermore, preliminary study is done for the application of APS (Air Plasma Spray) to SOFC and adhesion of anode and cathode with electrolytes for the determination of parameters involved in manufacturing the …

Antioxidant Nanoparticles As Delivery Systems, Carlos Ernesto Astete R.

LSU Doctoral Dissertations

The goal of the study was to develop antioxidant polymeric nanoparticles as a new delivery system for food and pharmaceutical applications. Natural antioxidants like alpha-tocopherol, vitamin C, and carnosine, are responsible to protect biological systems against free radicals attack. The conjugation of vitamin C-vitamin E (EC) and alpha-tocopherol-carnosine (VECAR) were performed to obtain antioxidant surfactants which were used for polymeric nanoparticle synthesis. The surfactant made of á-tocopherol (vitamin E) and ascorbic acid (vitamin C) of antioxidant properties dubbed as EC was used to make poly(lactic-co-glycolic) acid (PLGA) nanoparticles. Self-assembled EC nanostructures and PLGA-EC nanoparticles were made by nanoprecipitation, and the …

Identifying And Quantifying Factors Affecting Traffic Crash Severity In Louisiana, Hong Zhang

LSU Doctoral Dissertations

This study was conducted to identify and quantify the factors affecting highway crash severity in Louisiana. Three candidate models were fit to the crash data to compare their performance and the Ordered Mixed Logit (OML) model was selected as the crash severity prediction model of choice. The factors contributing to crash severity identified by the OML model are: age and gender of the driver, vehicle speed, whether alcohol played a role in the crash, whether seatbelts were used, whether the driver was ejected from the vehicle, whether the crash was a head-on collision, whether an airbag was deployed, and whether …

Fusion Of Sources Of Evidence With Different Importances And Reliabilities, Florentin Smarandache, Jean Dezert, J.M. Tacnet

Branch Mathematics and Statistics Faculty and Staff Publications

This paper presents a new approach for combining sources of evidences with different importances and reliabilities. Usually, the combination of sources of evidences with different reliabilities is done by the classical Shafer’s discounting approach. Therefore, to consider unequal importances of sources, if any, a similar reliability discounting process is generally used, making no difference between the notion of importance and reliability. In fact, in multicriteria decision context, these notions should be clearly distinguished. This paper shows how this can be done and we provide simple examples to show the differences between both solutions for managing importances and reliabilities of sources. …

Project And Risk Management: A Systematic Approach, Baqer Alali, C. Ariel Pinto, Andreas Tolk, Rafael Landaeta

Engineering Management & Systems Engineering Faculty Publications

The main purpose of this paper is to discuss three related topics of project management, systems management, and risk management. The issue that would be addressed in this paper is how risks are addressed in project and systems management, and how risks are propagated between projects and systems. A framework is proposed to overcome the problem of risk propagation from project to the systems. It was shown that the proposed framework can be deployed to existing risk management process with reasonable interventions (e.g. process prescribed by PMI). Finally a proof-of-concept application shows potential of the framework for various types of …

Feasibility Study Of Solar Driven Underground Cooling System, Michel E. Shafik

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

In the United States the peak electrical use occurs during the summer. In addition, the building sector consumes a major portion of the annual electrical energy consumption. One of the main energy consuming components in the building sector is the Heating, Ventilation, and Air-Conditioning (HVAC) systems. This research studies the feasibility of implementing a solar driven underground cooling system that could contribute to reducing building cooling loads. The developed system consists of an Earth-to-Air Heat Exchanger (EAHE) coupled with a solar chimney that provides a natural cool draft to the test facility building at the Solar Energy Research Test Facility …

Data Compression Concepts And Algorithms And Their Applications To Bioinformatics, Ozkan U. Nalbantoglu, David J. Russell, Khalid Sayood

Department of Electrical and Computer Engineering: Faculty Publications

Data compression at its base is concerned with how information is organized in data. Understanding this organization can lead to efficient ways of representing the information and hence data compression. In this paper we review the ways in which ideas and approaches fundamental to the theory and practice of data compression have been used in the area of bioinformatics. We look at how basic theoretical ideas from data compression, such as the notions of entropy, mutual information, and complexity have been used for analyzing biological sequences in order to discover hidden patterns, infer phylogenetic relationships between organisms and study viral …

Variable-Wavelength Frequency-Domain Terahertz Ellipsometry, Tino Hofmann, C. M. Herzinger, A. Boosalis, T. E. Tiwald, John A. Woollam, Mathias Schubert

Department of Electrical and Computer Engineering: Faculty Publications

We report an experimental setup for wavelength-tunable frequency-domain ellipsometric measurements in the terahertz spectral range from 0.2 to 1.5 THz employing a desktop-based backward wave oscillator source. The instrument allows for variable angles of incidence between 30° and 90° and operates in a polarizer-sample-rotating analyzer scheme. The backward wave oscillator source has a tunable base frequency of 107–177 GHz and is augmented with a set of Schottky diode frequency multipliers in order to extend the spectral range to 1.5 THz. We use an odd-bounce image rotation system in combination with a wire grid polarizer to prepare the input polarization state. …

A Microfluidic Method To Measure Diffusion In Hydrogels, Andrew Lee Litzenberger

Master’s Theses

A novel microfluidic method is proposed for studying diffusion of small molecules in a hydrogel. Microfluidic devices were prepared with semi-permeable microchannels defined by crosslinked poly(ethylene glycol) (PEG). Uptake of dye molecules from aqueous solutions flowing through the microchannels was observedoptically and diffusion of the dye into the hydrogel was quantified. To complement the diffusion measurements from the microfluidic studies, nuclear magnetic resonance(NMR) characterization of the diffusion of dye in the PEG hydrogels was performed. The diffusion of small molecules in a hydrogel is relevant to applications such asdrug delivery and modeling transport for tissue-engineering applications. The diffusion of small …

Solid-State Compatibilization Of Immiscible Polymer Blends: Cryogenic Milling And Solid-State Shear Pulverization, Marc Frederick Henry

Master’s Theses

The blending of common polymers allows for the rapid and facile synthesis of new materials with highly tunable properties at a fraction of the costs of new monomer development and synthesis. Most blends of polymers, however, are completely immiscible and separate into distinct phases with minimal phase interaction, severelydegrading the performance of the material. Cross-phase interactions and property enhancement can be achieved with these blends through reactive processing or compatibilizer addition. A new class of blend compatibilization relies on the mechanochemical reactions between polymer chains via solid-state, high energy processing. Two contrasting mechanochemical processing techniques are explored in this thesis: …

Chemical Compatibility Of Soil-Bentonite Cutoff Wall Backfills Containing Modified Bentonites, Matthew D. Mckeehan

Master’s Theses

This study examined the chemical compatibility of several model soil-bentonite(SB) backfills with an inorganic salt solution (CaCl2). First, bentonite-water slurry was created using a natural sodium-bentonite, as well as two modified bentonites –multiswellable bentonite (MSB) and a “salt-resistant” bentonite (SW101). Once slurries that met typical construction specifications had been created using the various bentonites,the model SB backfills were prepared for each type of bentonite. These backfills werealso designed to meet conventional construction and design requirements. The SB backfills were then subjected to permeation with tap water and/or CaCl2 solutions of various concentrations in order to evaluate the compatibility of the …

A General Approach Towards The Synthesis Of Amido-Functionalized Biodegradable Polyesters, Joseph Russell

Master’s Theses

The thesis presented here describes methodologies to produce pendant group functionalized polyesters from amido-functionalized α-hydroxy acids. The synthetic methods used to produce the functionalized α-hydroxy acids are compatible with a wide array of functional groups, making this technique highly versatile. The synthesis of functionalized polyesters was investigated to develop polymers with properties that may improve the capabilities of existing biodegradable polyesters for applications in controlled release pharmaceuticals. Chemically modified a-hydroxy acids were synthesized by reacting glyoxylic acid with a primary or secondary amide. To demonstrate the utility of this reaction, fourstructurally dissimilar amide substituents were examined including 2-pyrrolidione, benzamide, acetamide …

A Subthreshold Reconfigurable Architecture For Harsh Environments, Ameet O. Chavan

Open Access Theses & Dissertations

Energy harvesting and functional reconfigurability are necessary features in order to simultaneously achieve longer operating lifetimes and versatility in application for many next generation electronic systems. The presented research incorporates capabilities that not only enable applications to self-power from ambience but also permit change in functionality based on real-time application requirements. Currently, many applications are battery powered with custom hardware, which severely confines the application platform. Moreover, maintenance and upgrades are prohibitively expensive, particularly in the case of remote locations with limited accessibility. For harsh environments like Space or the battlefield, apart from features such as low power and econfigurability, …

Sensitivity Analysis Of The Johnson-Cook Plasticity Model For Hypervelocity Impacts: A Hydro-Code Study, Carlos David Castellanos

Open Access Theses & Dissertations

Computer simulations have been in use for decades in the modeling of hypervelocity impacts and general large deformation problems. Several computer codes have been developed to simulate this type of problems under a variety of geometric configurations and for any number of materials. These codes make use of several constitutive material models to simulate the response of the material under a variety of thermo-mechanical conditions. The Johnson-Cook constitutive model is widely used in the simulation hypervelocity impacts for the simulation of crater formation and even perforation of target structures. This thesis presents the results of a sensitivity study of this …

Synthesis And Manufacture Of Photocrosslinkable Poly(Caprolactone)-Based 3d Scaffolds For Tissue Engineering Applications, Nathan Jonathan Castro

Open Access Theses & Dissertations

It is known that the body can efficiently repair hard tissue (bone) micro fractures by suturing the defect through the deposition of minerals resulting in an area that is stronger post-injury. Larger defects, however, generally cause more trouble since the body is incapable of repairing them. Bone defects can occur as a result of congenital abnormalities, trauma, or disease. Traditional methods for addressing these defects have involved the use of acellular cadaverous bone or autologous bone. Both contain innate problems associated with them; the former method can result in disease transmission, as well as very low integration with the host …

Multidisciplinary Collaborative Model For Complex, Angel Ernesto Delgado

Open Access Theses & Dissertations

Nowadays, most devices with advanced technology require the development of embedded systems with mechanical and electrical components as well as software including more than one discipline. These are devices that are usually complex in terms of composition and functionality and that design must follow a methodology in order to successfully design and launch a device of this nature. Hence, the assembly of a multidisciplinary engineering group is required to carry out such complex devices and develop a fully functional product. The group may also need an expert on the field that can provide guidance and knowledge where needed. This is …

Assessing Annual And Seasonal Spatial Variability Of Ambient Pm10 Using Linear Regression Analysis In A United States-Mexico Urban Sprawl, Mario Ivan Garcia

Open Access Theses & Dissertations

As air quality issues grow progressively in the consciousness of the global community, stakeholders are pressing for epidemiologic studies of air pollution. The effects of chronic exposure to ambient air pollution remain a difficult challenge due to its substantial small-scale spatial variation. Recent approaches to assess intra-urban exposure have employed the use of proximity-based assessment, interpolation methods, emission-meteorological models, dispersions models, and land-use regression (LUR) models.

This thesis assesses the spatial variability of ambient particulate matter (PM10) obtained by five self-governing models for the area of El Paso. Using multiple linear regression analysis five regression-based equations were developed to predict …

Automated Fluid Handling And Leveling System For Multiple Material Stereolithography, Yinko I. Grajeda

Open Access Theses & Dissertations

This work addresses the development of an automated multiple material fluid handling and leveling system for its implementation into a Multiple-Material Stereolithography (MMSL) apparatus. A patent filed by Wicker et al. (US Patent 7,556,490) disclosing a MMSL apparatus served as the basis for the development of this work. The system is designed to operate in a variety of MMSL apparatus configurations. Fluid vats are designed to meet the enclosure constraints, facilitate the interface to the pump and sensor, and support the handling of the fluids. Due to its fluid isolation and bi-directional flow capabilities, a digital drive peristaltic pump is …

Tungsten Oxide (Wo3) Thin Films For H2s Sensor Application In Energy Systems, Satya Kiran Gullapalli

Open Access Theses & Dissertations

The sulfur containing emissions in coal gasification systems to produce energy are devastating and hostile to the requirements of clean, environmental friendly, efficient, and economical energy. Therefore, hydrogen sulfide (H₂S) emissions in coal gasification plants must be monitored, controlled and effectively removed before the syngas is used for energy production. The present research focuses on the development and utilization of tungsten oxide (WO₃) thin films and nanostructures for H₂S application in the coal gasification systems. As a part of that overall goal, the present work was performed with a specific objective of understanding the …

Controlling Features And Processes For Radionuclide Release From Unsaturated Zone Geological Repositories, Lubna K. Hamdan

Open Access Theses & Dissertations

In the long run, nuclear waste packages will fail gradually due to localized and general corrosion and radionuclides will be transported to the accessible environment by ground water.

Two main failure scenarios are expected for the waste packages: Flow-through model and bathtub model; in the flow-through model water flows through the waste container, while in the bathtub model water pools inside the waste package. The Department of Energy, in their performance assessment of the proposed repository at Yucca Mountain, excluded the bathtub model from their analysis and assumed the diffusion and advection to be in the same direction in the …

Selection Process, Modified Impact Testing And Failure Analysis Of An Electron-Beam-Melted Ti-6al-4v 3d Tessellation Based On The Eulerian Path Of The First Stellation Of The Rhombic Dodecahedron Open Unit Cell, Hugo Lopez

Open Access Theses & Dissertations

Ti-6Al-4V lattice block structures manufactured through the electron beam melting (EBM) process are a promising field in design and research due to great advantages that the alloy, the process and the final product offer. Three lattice block structures were manufactured through the electron beam process using an ARCAM A2 machine. The structures were designed using the MATERIALIZE^TM software and were designed around different types of unit cells. Compression testing was performed and one unit cell was selected due to its anisotropic behavior for modified impact testing. The same unit cell was used and it was scaled up to add …

Dynamic Modeling Of Human Gait And Motor, Chad Everett Joshua Macdonald

Open Access Theses & Dissertations

The simulation of gait, impairments and the outcomes of rehabilitation strategies is an important area of research. The ability to study the efficacy of treatment options before applying them to patients has the potential to improve the efficiency of the rehabilitation process. Any such simulations must incorporate some model of the motor learning process to properly anticipate the responses of patients.This dissertation presents initial work on the modeling of gait and the study of motor adaptation with a view towards simulating the motor adaptation process during gait.

Specifically, an inverse dynamic model of gait incorporating sagittal plane limb and torso …

Processing Of Zrb2-Zrc-Zrxsiy Ceramic By Reactive Metal Penetration, Nischel B. Maheswaraiah

Open Access Theses & Dissertations

The processing of ZrB2-ZrC-ZrxSiy composite by reactive metal penetration was investigated as a successor to the ZrB2-SiC composites for hypersonic vehicles application, which cannot be used for extended time at temperatures greater than 1600C due to formation of SiO and CO gases. Zirconium (Zr), zirconium disilicide (ZrSi2), and boron carbide (B4C) were reacted in graphite crucibles for 60, 120, 180, and 240 minutes. Microscopy and x-ray diffraction (XRD) deduced the formation of a heterogeneous microstructure of ZrB2-ZrC-ZrxSiy precipitates surrounded by a solidified Zr-Si melt. Unreacted boron carbide was observed in samples held at 1860C for 60 minutes and 120 minutes, …

A New Green Chemistry Method Based On Plant Extracts To Synthesize Gold Nanoparticles, Milka Odemariz Montes Castillo

Open Access Theses & Dissertations

Extraordinary chemical and physical properties exhibited by nanomaterials, as compared to their bulk counterparts, have made the area of nanotechnology a growing realm in the past three decades. It is the nanoscale size (from 1 to 100 nm) and the morphologies of nanomaterials that provide several properties and applications not possible for the same material in the bulk. Magnetic and optical properties, as well as surface reactivity are highly dependent on the size and morphology of the nanomaterial. Diverse nanomaterials are being widely used in molecular diagnostics as well as in medicine, electronic and optical devices. Among the most studied …

Novel Control Technique For Cadmium Sulfide, Rafael Ordonez

Open Access Theses & Dissertations

Cadmium sulfide Chemical-Bath-Deposition parameters are modified to allow, for the first time, real time monitoring of cadmium ion molarity using a commercially available cadmium ion Ion-Selective-Electreode at 60°C. This modification involves alterations to typical deposition parameters that eliminate the formation of cadmium hydroxide and keep cadmium ion molarity above 10-7M. The new or atypical parameters developed are pH values below 8.9 and lower moralities for all chemicals. In order to have complexation of cadmium ion driven mainly by ammonia, parameters that minimized complexation by other chemicals are found. Cadmium acetate concentration below 2mM and ammonium acetate concentration below 10mM minimize …

Impact Of Moisture Content And Density On Stiffness-Based Acceptance Of Geomaterials, Lourdes Guadalupe Pacheco

Open Access Theses & Dissertations

Modulus-based quality management of compacted layers has been considered by a number of highway agencies. Even though simple in concept, the paradigm shift from density to modulus for quality acceptance has generated some technical and institutional challenges. One of these complications is that for a given density, the modulus can vastly vary depending on the moisture content at the time of compaction and at the time of acceptance. The results of a systematic study carried out to qualify and quantify the impact of compaction moisture content, moisture content at the time of field testing and density on the modulus and …