Engineering Commons^™

Transitional Flow Prediction Of A Compressor Airfoil, Vivek Hariharan

University of Kentucky Master's Theses

The steady flow aerodynamics of a cascade of compressor airfoils is computed using a two-dimensional thin layer Navier-Stokes flow solver. The Dhawan and Narasimha transition model and Mayle‟s transition length model were implemented in this flow solver so that transition from laminar to turbulent flow could be included in the computations. A method to speed up the convergence of the fully turbulent calculations has been introduced. In addition, the effect of turbulence production formulations and including streamline curvature correction in the Spalart-Allmaras turbulence model on the transition calculations is studied. These transitional calculations are correlated with the low and high …

Hydraulic Geometry Relationships And Regional Curves For The Inner And Outer Bluegrass Regions Of Kentucky, Ruth Roseann Brockman

University of Kentucky Master's Theses

Hydraulic geometry relationships and regional curves are used in natural channel design to assist engineers, biologists, and fluvial geomorphologists in the efforts undertaken to ameliorate previous activities that have diminished, impaired or destroyed the structure and function of stream systems. Bankfull channel characteristics were assessed for 14 United States Geological Survey (USGS) gaged sites in the Inner Bluegrass and 15 USGS gaged sites in the Outer Bluegrass Regions of Kentucky. Hydraulic geometry relationships and regional curves were developed for the aforementioned regions.

Analysis of the regression relationships showed that bankfull discharge is a good explanatory variable for bankfull parameters such …

Characterization Of Poly(Methyl Methacrylate Based Nanocomposites Enhanced With Carbon Nanotubes, Andrew Jonathan Placido

University of Kentucky Master's Theses

The viscoelastic relaxation dynamics of a series of poly(methyl methacrylate) [PMMA] based nanocomposites filled with carbon nanotubes have been studied using dynamic mechanical analysis and broadband dielectric spectroscopy. The networks were prepared using four methods: (i) melt mixing, (ii) solution processing, (iii) in-situ polymerization, and (iv) polymer grafting. Nanotube modifications included surface oxidation via acid exposure and surface functionalization for polymer grafting. The effect of variations in processing method and nanotube modification on glass transition temperature (T_g) and relaxation dynamics was investigated. The relaxation behavior of the nanocomposites was sensitive to processing method and nanotube functionalization. Nanotube loading …

Detection Of Roof Boundaries Using Lidar Data And Aerial Photography, Andrew David Gombos

University of Kentucky Master's Theses

The recent growth in inexpensive laser scanning sensors has created entire fields of research aimed at processing this data. One application is determining the polygonal boundaries of roofs, as seen from an overhead view. The resulting building outlines have many commercial as well as military applications. My work in this area has created a segmentation algorithm where the descriptive features are computationally and theoretically simpler than previous methods. A support vector machine is used to segment data points using these features, and their use is not common for roof detection to date. Despite the simplicity of the feature calculations, the …

The Relationship Between Information Technology And Construction Productivity, Dong Zhai

University of Kentucky Doctoral Dissertations

Over the past decades, information technology has been impacting industries, economics, the way of life and even the culture throughout the world. Productivity has been attracting much attention as an important indicator of economics, and numerous researchers have investigated the relationship between information technology and productivity. Construction is one of the largest industries in the United States, but little research has been conducted to investigate the relationship between information technology and construction productivity.

The major objective of this dissertation is to determine the degree (if any) to which information technology usage, specifically the use of information technology to automate and …

Dielectrophoretic Choking Phenomenon In A Converging-Diverging Microchannel, Ye Ai, Shizhi Qian, Sheng Liu, Sang W. Joo

Mechanical & Aerospace Engineering Faculty Publications

Experiments show that particles smaller than the throat size of converging-diverging microchannels can sometimes be trapped near the throat. This critical phenomenon is associated with the negative dc dielectrophoresis arising from nonuniform electric fields in the microchannels. A finite-element model, accounting for the particle-fluid-electric field interactions, is employed to investigate the conditions for this dielectrophoretic (DEP) choking in a converging-diverging microchannel for the first time. It is shown quantitatively that the DEP choking occurs for high nonuniformity of electric fields, high ratio of particle size to throat size, and high ratio of particle's zeta potential to that of microchannel. © …

Security In Ad Hoc Networks And Pervasive Computing, Isaac Z. Wu, X.-Y. Li, M. Song, C.-M. Liu

Electrical & Computer Engineering Faculty Publications

Pervasive computing is an exciting and blooming research field, in which innovative techniques and applications are continuously emerging and aim to provide ambient and personalized services to users with high quality. Ad hoc networks are wireless, self-organizing systems formed by cooperating nodes within communication range of each other that form temporary networks. Their topology is dynamic, decentralized, ever changing and the nodes may move around arbitrarily. The last few years have witnessed a wealth of research ideas on ad hoc networking that are moving rapidly into implemented standards. Technology under development for ad hoc networks and pervasive computing is making …

Testing Fuel Efficiency Of Tractors With Both Continuously Variable And Standard Geared Transmissions, Christopher N. Howard

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

A John Deere 8295R IVT tractor with a continuously variable transmission (CVT) and a John Deere 8295R PowerShift (PST) tractor (Waterloo, Iowa) with a standard geared transmission (GT) were tested for fuel consumption at three different travel speeds with six different load levels applied per speed. The JD 8295R PST tractor was tested both at full throttle (FT) and shifted up two gears and throttled back (SUTB) to achieve the same travel speed as at full throttle conditions. The three speeds tested corresponded to the maximum speeds achieved in 6th, 8th and 10th gear for the JD 8295R PST tractor …

Super Special Codes Using Super Matrices, Florentin Smarandache, W.B. Vasantha Kandasamy, K. Ilanthenral

Branch Mathematics and Statistics Faculty and Staff Publications

The new classes of super special codes are constructed in this book using the specially constructed super special vector spaces. These codes mainly use the super matrices. These codes can be realized as a special type of concatenated codes. This book has four chapters. In chapter one basic properties of codes and super matrices are given. A new type of super special vector space is constructed in chapter two of this book. Three new classes of super special codes namely, super special row code, super special column code and super special codes are introduced in chapter three. Applications of these …

Fusion Of Imprecise Qualitative Information, Florentin Smarandache, Xinde Li, Xianzhong Dai, Jean Dezert

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper, we present a new 2-tuple linguistic representation model, i.e. Distribution Function Model (DFM), for combining imprecise qualitative information using fusion rules drawn from Dezert-Smarandache Theory (DSmT) framework. Such new approach allows to preserve the precision and efficiency of the combination of linguistic information in the case of either equidistant or unbalanced label model. Some basic operators on imprecise 2-tuple labels are presented together with their extensions for imprecise 2-tuple labels. We also give simple examples to show how precise and imprecise qualitative information can be combined for reasoning under uncertainty. It is concluded that DSmT can deal …

Multispace & Multistructure. Neutrosophic Transdisciplinarity (100 Collected Papers Of Sciences), Vol. Iv, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

The fourth volume, in my book series of “Collected Papers”, includes 100 published and unpublished articles, notes, (preliminary) drafts containing just ideas to be further investigated, scientific souvenirs, scientific blogs, project proposals, small experiments, solved and unsolved problems and conjectures, updated or alternative versions of previous papers, short or long humanistic essays, letters to the editors - all collected in the previous three decades (1980-2010) – but most of them are from the last decade (2000-2010), some of them being lost and found, yet others are extended, diversified, improved versions. This is an eclectic tome of 800 pages with papers …

Test 1982: New Holland Ts6030, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Hrc Enews — 2010 Winter, Megan K. Svarz

Publications (HRC)

This issue contains staff accomplishments and announcements, event listings, a "new faces" listing for new staff, affiliates, and researchers, and an "on the move" section listing new developments.

Enhanced Vacuum Drying Through Improved Solvent Recovery, Reduced Process Cycle Times And Prediction Of Drying Duration, Diana Patricia Mesa Delgado

Theses

Drying of pharmaceuticals and fine chemicals is often accomplished under vacuum conditions to enhance energy efficiency and to avoid overheating of thermo sensitive materials. This project aims to study vacuum drying operations to obtain a better understanding of this process so as to optimize drying performance. This project obtained industrial data collected from a range companies in Ireland.

Pharmaceutical companies started assessing processes and making changes to drying processes from 2004 onwards; these initiatives are due to economic pressures, environmental issues and the Process Analytical Technology (PAT) initiative launched by the FDA in 2004.

Vacuum drying has been used in …

Effect Of Free-Edges On Melt Pool Geometry And Solidification Microstructure In Beam-Based Fabrication Methods, Joy Elizabeth Davis

Browse all Theses and Dissertations

Laser and electron beam-based additive manufacturing of Ti-6Al-4V are under consideration for application to aerospace components. A critical concern for these processes is the ability to obtain a consistent and desirable microstructure and corresponding mechanical properties of the deposit. Based on the Rosenthal solution for a moving point-heat source, recent work has developed simulation-based process maps for the thermal conditions controlling microstructure (grain size and morphology) in beam-based deposition of semi-infinite geometries, where a steady-state melt pool exists away from free-edges. In the current study, the Rosenthal solution is modified to include the effects of free-edges. This is accomplished by …

Investigating Fabrication Methods For Micro Single-Chamber Solid Oxide Fuel Cells, Man Yang

Dissertations

A Solid Oxide Fuel Cell (SOFC) is a green energy technology that offers a cleaner and efficient alternative to fossil fuels. The efficiency and utility of SOFCs can be enhanced by fabricating miniaturized component structures within the fuel cell footprint. This research focuses on the microfabrication of parallel-connected inter-digitized design of micro single chamber SOFC (µ-SC-SOFCs). In this dissertation, candidate micro/nano fabrication techniques to precisely fabricate micro patterns on planar substrates have been studied. These include EBL, soft lithography, photolithography, and direct-writing. After analyzing preliminary results, two combinational approaches were further investigated. The first method involves the combination of the …

Characterization And Design Of A Completely Parameterizable Vhdl Digital Single Sideband Modulator Circuit For Quick Implementation In Fpga Or Asic Electronic Warfare Platforms, Harold Scott Axtell

Browse all Theses and Dissertations

In this work we present the design and characterization of a parameterizable Digital Single Sideband Modulator (DSSM) circuit for use with a Digital Radio Frequency Memory (DRFM) or other signal processing circuits. Field Programmable Gate Arrays (FPGAs) can be used as a prototyping platform for quickly verifying and hardware testing a digital circuit or system. FPGAs can also be used as an implementation platform for a digital circuit or system. A main advantage of FPGAs over that of an Application Specific Integrated Circuit (ASIC) is that it can be quickly (and often dynamically) reprogrammed; whereas an ASIC can take months …

Experimental Studies Of Turbulent Boundary Layers Over A Rough Forward-Facing Step And Its Coarse Scale Resolution Approximations, Huiying Ren

Browse all Theses and Dissertations

High spatial resolution PIV experiments are performed in the x-y plane at two different spanwise positions to compare the turbulent boundary layers over smooth and rough forward-facing-steps as well as the rough step's two coarse scale-resolution approximations. The Reynolds number based on the step's mean height, Re_h, is 3450 and the ratio of the boundary layer thickness to the step's height is δ/h = 8. The roughness topography on the top surface of the rough step is replicated from a realistic turbine blade and is intrinsically three-dimensional and highly irregular. The surface topographies of the coarse scale-resolution …

Distributed Turbo Product Coding Techniques Over Cooperative Communication Systems, Esam Ali Obiedat

Electronic Theses and Dissertations

In this dissertation, we propose a coded cooperative communications framework based on Distributed Turbo Product Code (DTPC). The system uses linear block Extended Bose-Chaudhuri-Hochquenghem (EBCH) codes as component codes. The source broadcasts the EBCH coded frames to the destination and nearby relays. Each relay constructs a product code by arranging the corrected bit sequences in rows and re-encoding them vertically using EBCH as component codes to obtain an Incremental Redundancy (IR) for source's data. Under this frame, we have investigated a number of interesting and important issues. First, to obtain, independent vertical parities from each relay in the same code …

Biosignal Processing Challenges In Emotion Recognitionfor Adaptive Learning, Aniket Vartak

Electronic Theses and Dissertations

User-centered computer based learning is an emerging field of interdisciplinary research. Research in diverse areas such as psychology, computer science, neuroscience and signal processing is making contributions the promise to take this field to the next level. Learning systems built using contributions from these fields could be used in actual training and education instead of just laboratory proof-of-concept. One of the important advances in this research is the detection and assessment of the cognitive and emotional state of the learner using such systems. This capability moves development beyond the use of traditional user performance metrics to include system intelligence measures …

Heat Transfer Augmentation In A Narrow Rectangular Duct With Dimples Applied To A Single Wall, Carson Slabaugh

Electronic Theses and Dissertations

Establishing a clean and renewable energy supply is the preeminent engineering challenge of our time. Turbines, in some form, are responsible for more than 98 percent of all electricity generated in the United State and 100 percent of commercial and military air transport. The operation of these engines is clearly responsible for significant consumption of hydrocarbon fuels and, in turn, emission of green house gases into the atmosphere. With such wide-scale implementation, it is understood that even the smallest increase in the operating efficiency of these machines can lead to enormous improvements over the current energy situation. These effects can …

Validation Of Wideband Ocean Emissivity Radiative Transfer Model, Sonya Crofton

Electronic Theses and Dissertations

Radiative Transfer Models (RTM) have many applications in the satellite microwave remote sensing field, such as the retrieval of oceanic and atmospheric environmental parameters, including surface wind vectors and sea surface temperatures, integrated water vapor, cloud liquid, and precipitation. A key component of the ocean RTM is the emissivity model used to determine the brightness temperature (Tb) at the ocean’s surface. A new wideband ocean emissivity RTM developed by the Central Florida Remote Sensing Laboratory (CFRSL) calculates ocean emissivity over a wide range of frequencies, incidence angles, sea surface temperatures (SST), and wind speed. This thesis presents the validation of …

Learning From Geometry In Learning For Tactical And Strategic Decision Domains, Jason Gauci

Electronic Theses and Dissertations

Artificial neural networks (ANNs) are an abstraction of the low-level architecture of biological brains that are often applied in general problem solving and function approximation. Neuroevolution (NE), i.e. the evolution of ANNs, has proven effective at solving problems in a variety of domains. Information from the domain is input to the ANN, which outputs its desired actions. This dissertation presents a new NE algorithm called Hypercube-based NeuroEvolution of Augmenting Topologies (HyperNEAT), based on a novel indirect encoding of ANNs. The key insight in HyperNEAT is to make the algorithm aware of the geometry in which the ANNs are embedded and …

Development Of Optical Coherence Tomography For Tissue Diagnostics, Panomsak Meemon

Electronic Theses and Dissertations

Microvasculature can be found in almost every part of the human body, including the internal organs. Importantly, abnormal changes in microvasculature are usually related to pathological development of the tissue cells. Monitoring of changes in blood flow properties in microvasculature, therefore, provides useful diagnostic information about pathological conditions in biological tissues as exemplified in glaucoma, diabetes, age related macular degeneration, port wine stains, burn-depth, and potentially skin cancer. However, the capillary network is typically only one cell in wall thickness with 5 to 10 microns in diameter and located in the dermis region of skin. Therefore, a non-invasive flow imaging …

Effect Of Fluorination On Partitioning Behavior And Bilayer Self Assembly, Vivian Aramide Ojogun

University of Kentucky Doctoral Dissertations

Fluorinated systems are defined by unique properties that offer advantages in drug delivery, material synthesis and industrial applications. In comparison to their hydrocarbon counterparts, the design of fluorinated solutes for tailored applications is limited by the inability to predict the effect of fluorination on phase behavior. This work examines and interprets the influence of fluorination on the phase behavior of fluorinated solutes and surfactants, with emphasis on their impact on vesicle bilayers.

Thermodynamic partitioning of functionalized series of fluorinated and hydrocarbon nicotinate prodrugs fashioned to promote solubility in a fluorocarbon solvent (perfluorooctyl bromide; PFOB) is measured. Predictive approaches are also …

Integration Of The Regression-Based Land Use Model And The Combined Trip Distribution-Assignment Transportation Model, Meiwu An

University of Kentucky Doctoral Dissertations

Regional growth caused the emergence of traffic congestion and pollution in the past few decades, which have started to affect small urban areas. These problems are not only related to transportation system design but also to land use planning. There has been growing recognition that the relationship between land use and transportation needs to be understood and analyzed in a consistent and systematic way. Integrated urban models have recently been introduced and implemented in several metropolitan areas to systematically examine the relationship between land use and transportation. The general consensus in the field of integrated urban models is that each …

Research In Technology Education, Philip A. Reed (Editor), James E. Laporte (Editor)

STEMPS Faculty Books

Due to the laboratory-based nature of technology and engineering education programs, professionals in our field have often focused on the resources in our classrooms and laboratories and the instructional methodologies used to address specific concepts. Formal research into content and practice has often given way to “what seems right”. New curriculum is constantly being introduced (based on what is occurring in business and industry), yet the inclusion for those evolving concepts in courses and programs is typically not verified.

Hence, the importance of the 2010 CTTE yearbook and its focus on the dire need for an aggressive research agenda in …

Effluent Organic Nitrogen (Eon): Bioavailability And Photochemical And Salinity-Mediated Release, Deborah A. Bronk, Quinn N. Roberts, Marta P. Sanderson, Elizabeth A. Canuel, Patrick G. Hatcher, Rajaa Mesfioui, Katherine C. Filippino, Margaret R. Mulholland, Nancy G. Love

Chemistry & Biochemistry Faculty Publications

The goal of this study was to investigate three potential ways that the soluble organic nitrogen (N) fraction of wastewater treatment plant (WWTP) effluents, termed effluent organic N (EON), could contribute to coastal eutrophication - direct biological removal, photochemical release of labile compounds, and salinity-mediated release of ammonium (NH₄+). Effluents from two WWTPs were used in the experiments. For the bioassays, EON was added to water from four salinities (∼0 to 30) collected from the James River (VA) in August 2008, and then concentrations of N and phosphorus compounds were measured periodically over 48 h. Bioassay results, based …

Study Of Microstructure Effect On The Thermal Properties Of Yttria-Stabilized-Zirconia Thermal Barrier Coatings Made By Atmospheric Plasma Spray And Pressing Machine, Monica Bohorquez De Silva

LSU Doctoral Dissertations

Thermal barrier coatings (TBCs) are used in gas turbine engines to achieve a higher working temperature and thus lead to better efficiency. Yttria-Stabilized-Zirconia (YSZ), a material with low thermal conductivity, is commonly used as the top coat layer to provide the thermal barrier effect. In this dissertation the thermo-physical properties of a variety of TBCs samples made out of different fabrication techniques were investigated and compared. The first set of samples was fabricated using a pressing machine device to fabricate 0.5 inch diameter disk shaped YSZ-Al2O3 samples. The YSZ-Al2O3 powder mixture was made of 0, 1, 2, 3, 4 and …

Lattice Boltzmann Modeling For Shallow Water Equations Using High Performance Computing, Kevin Tubbs

LSU Doctoral Dissertations

The aim of this dissertation project is to extend the standard Lattice Boltzmann method (LBM) for shallow water flows in order to deal with three dimensional flow fields. The shallow water and mass transport equations have wide applications in ocean, coastal, and hydraulic engineering, which can benefit from the advantages of the LBM. The LBM has recently become an attractive numerical method to solve various fluid dynamics phenomena; however, it has not been extensively applied to modeling shallow water flow and mass transport. Only a few works can be found on improving the LBM for mass transport in shallow water …