Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2010

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 3091 - 3120 of 5382

Full-Text Articles in Engineering

Handshaking Protocols And Jamming Mechanisms For Blind Rendezvous In A Dynamic Spectrum Access Environment, Aaron A. Gross Mar 2010

Handshaking Protocols And Jamming Mechanisms For Blind Rendezvous In A Dynamic Spectrum Access Environment, Aaron A. Gross

Theses and Dissertations

Blind frequency rendezvous is an important process for bootstrapping communications between radios without the use of pre-existing infrastructure or common control channel in a Dynamic Spectrum Access (DSA) environment. In this process, radios attempt to arrive in the same frequency channel and recognize each other’s presence in changing, under-utilized spectrum. This paper refines existing blind rendezvous techniques by introducing a handshaking algorithm for setting up communications once two radios have arrived in the same frequency channel. It then investigates the effect of different jamming techniques on blind rendezvous algorithms that utilize this handshake. The handshake performance is measured by determining …

Go to article

Codifying Information Assurance Controls For Department Of Defense (Dod) Supervisory Control And Data Acquisition (Scada) Systems (U), Eddie A. Mendezllovet Mar 2010

Codifying Information Assurance Controls For Department Of Defense (Dod) Supervisory Control And Data Acquisition (Scada) Systems (U), Eddie A. Mendezllovet

Theses and Dissertations

Protecting DoD critical infrastructure resources and Supervisory Control and Data Acquisition (SCADA) systems from cyber attacks is becoming an increasingly challenging task. DoD Information Assurance controls provide a sound framework to achieve an appropriate level of confidentiality, integrity, and availability. However, these controls have not been updated since 2003 and currently do not adequately address the security of DoD SCADA systems. This research sampled U.S. Air Force Civil Engineering subject matter experts representing eight Major Commands that manage and operate SCADA systems. They ranked 30 IA controls in three categories, and evaluated eight SCADA specific IA controls for inclusion into …

Go to article

Scalable And Fault Tolerant Group Key Management, Nicholas A. Lupien Mar 2010

Scalable And Fault Tolerant Group Key Management, Nicholas A. Lupien

Theses and Dissertations

To address the group key management problem for modern networks this research proposes a lightweight group key management protocol with a gossip-based dissemination routine. Experiments show that by slightly increasing workload for the key update mechanism, this protocol is superior to currently available tree-based protocols with respect to reliability and fault tolerance, while remaining scalable to large groups. Java simulations show that the protocol efficiently distributes keys to large groups in the midst of up to 35 percent node failure rates. In addition, it eliminates the need for logical key hierarchy while preserving an overall reduction in rekey messages to …

Go to article

Developing An Effective And Efficient Real Time Strategy Agent For Use As A Computer Generated Force, Kurt Weissgerber Mar 2010

Developing An Effective And Efficient Real Time Strategy Agent For Use As A Computer Generated Force, Kurt Weissgerber

Theses and Dissertations

Computer Generated Forces (CGF) are used to represent units or individuals in military training and constructive simulation. The use of CGF significantly reduces the time and money required for effective training. For CGF to be effective, they must behave as a human would in the same environment. Real Time Strategy (RTS) games place players in control of a large force whose goal is to defeat the opponent. The military setting of RTS games makes them an excellent platform for the development and testing of CGF. While there has been significant research in RTS agent development, most of the developed agents …

Go to article

Effects Of Channel Mismatches On Beamforming And Signal Detection, Christopher I. Allen Mar 2010

Effects Of Channel Mismatches On Beamforming And Signal Detection, Christopher I. Allen

Theses and Dissertations

Tuner gain measurements of a multichannel receiver are reported. A linear regression model is used to characterize the gain, as a function of channel number, tuner set-on frequency, and intermediate frequency. Residual errors of this model are characterized by a t distribution. Very strong autocorrelation of tuner gain at various frequencies is noted. Tuner performance from one channel to the next is diverse; several defects at specific frequencies are noted. The Wilcoxon signed rank test is used to test normality of tuner gain among devices; normality is rejected. Antenna directivity and phase pattern measurements are also reported. An antenna element …

Go to article

Static And Dynamic Component Obfuscation On Reconfigurable Devices, Camdon R. Cady Mar 2010

Static And Dynamic Component Obfuscation On Reconfigurable Devices, Camdon R. Cady

Theses and Dissertations

Computing systems are used in virtually every aspect of our lives. Technology such as smart phones and electronically controlled subsystems in cars is becoming so commonly used that it is virtually ubiquitous. Sometimes, this technology can be exploited to perform functions that it was never intended to perform, or fail to provide information that it is supposed to protect. X-HIA was shown to be effective at identifying several circuit components in a significantly shorter time than previous identification methods. Instead of requiring a number of input/output pairings that grows factorially or exponentially as the circuit size grows, it requires only …

Go to article

Improved Multispectral Skin Detection And Its Application To Search Space Reduction For Dismount Detection Based On Histograms Of Oriented Gradients, Adam L. Brooks Mar 2010

Improved Multispectral Skin Detection And Its Application To Search Space Reduction For Dismount Detection Based On Histograms Of Oriented Gradients, Adam L. Brooks

Theses and Dissertations

Due to the general shift from conventional warfare to terrorism and urban warfare by enemies of the United States in the late 20th Century, locating and tracking individuals of interest have become critically important. Dismount detection and tracking are vital to provide security and intelligence in both combat and homeland defense scenarios including base defense, combat search and rescue (CSAR), and border patrol. This thesis focuses on exploiting recent advances in skin detection research to reliably detect dismounts in a scene. To this end, a signal-plus-noise model is developed to map modeled skin spectra to the imaging response of an …

Go to article

High Power Microwave (Hpm) And Ionizing Radiation Effects On Cmos Devices, Nicholas A. Estep Mar 2010

High Power Microwave (Hpm) And Ionizing Radiation Effects On Cmos Devices, Nicholas A. Estep

Theses and Dissertations

Integrated circuits (ICs) are inherently complicated and made worse by increasing transistor quantity and density. This trend potentially enhances concomitant effects of high energy radiation and local or impressed electromagnetic interference (EMI). The reduced margin for signal error may counter any gain in radiation hardness from smaller device dimensions. Isolated EMI and ionizing radiation studies on circuits have been conducted extensively over the past 30 years. However, little focus has been placed on the combined effects. To investigate the effect of combined EMI and ionizing radiation, two complementary metal oxide semiconductor (CMOS) inverter technologies (CD4069 and SN74AUC1G04) were analyzed for …

Go to article

Application Of The Three Short Calibration Technique In A Low Frequency Focus Beam System, William E. Gunn Jr. Mar 2010

Application Of The Three Short Calibration Technique In A Low Frequency Focus Beam System, William E. Gunn Jr.

Theses and Dissertations

Electromagnetic material characterization is the process of determining the constitutive parameters of matter. In simple media, these parameters are permittivity and permeability. Characterization of these values is often accomplished through the use of waveguides, transmission lines, coaxial cables, and resonant cavities. Free space measurements systems are employed since they are non destructive (i.e., no sample machining is required) and broadband. Traditionally, time domain gating is utilized to mitigate systematic errors. However, an artifact of this calibration technique is band edge corruption due to data windowing. The goal of this research is to develop and apply a Three Short Calibration Technique …

Go to article

An Approach To Large Scale Radar-Based Modeling And Simulation, Lester C. Long Iv Mar 2010

An Approach To Large Scale Radar-Based Modeling And Simulation, Lester C. Long Iv

Theses and Dissertations

This research presents a method of aggregating, or reducing the resolution, of a commonly available Department of Defense (DoD) simulation. It addresses the differences between varying levels of resolution and scope used in the DoD’s hierarchy of models pyramid. A data representation that aggregates engagement-level simulation data to use at a lower resolution level, the mission-level, is presented and analyzed. Two formats of implementing this data representation are developed and compared: the rigid cylinder format and the expanding tables format. The rigid cylinder format provides an intuitive way to visualize the data and is used to develop the theory. The …

Go to article

Characterization And Measurement Of Passive And Active Metamaterial Devices, Christopher A. Lundell Mar 2010

Characterization And Measurement Of Passive And Active Metamaterial Devices, Christopher A. Lundell

Theses and Dissertations

This document addresses two major obstacles facing metamaterial development: uncertainty in the characterization of electromagnetic field behavior in metamaterial structures and the relatively small operational bandwidth of metamaterial structures. To address the first obstacle, a new method to characterize electromagnetic field behavior in a metamaterial is presented. This new method is a bistatic radar cross section (RCS) measurement technique. RCS measurements are well-suited to measuring bulk metamaterial samples because they show frequency dependence of scattering angles and offer common postprocessing techniques that can be useful for visualizing results. To address the second obstacle, this document characterizes the effectiveness of an …

Go to article

Spectral Domain Rf Fingerprinting For 802.11 Wireless Devices, Sheldon A. Munns Mar 2010

Spectral Domain Rf Fingerprinting For 802.11 Wireless Devices, Sheldon A. Munns

Theses and Dissertations

The increase in availability and reduction in cost of commercial communication devices (e.g. IEEE compliant such as 802.11, WiFi, 802.16, Bluetooth etc.) has increased wireless user exposure and the need for techniques to properly identify/classify signals for increased security measures. Communication device emissions include intentional modulation that enables correct device operation. Hardware and environmental factors alter the ideal response and induce unintentional modulation effects. If these effects (features) are sufficiently unique, it becomes possible to identify a device using its fingerprint, with potential discrimination of not only the manufacturer but possibly the serial number for a given manufacturer. Many techniques …

Go to article

Component Hiding Using Identification And Boundary Blurring Techniques, James D. Parham Jr. Mar 2010

Component Hiding Using Identification And Boundary Blurring Techniques, James D. Parham Jr.

Theses and Dissertations

Protecting software from adversarial attacks is extremely important for DoD technologies. When systems are compromised, the possibility exists for recovery costing millions of dollars and countless labor hours. Circuits implemented on embedded systems utilizing FPGA technology are the result of downloading software for instantiating circuits with specific functions or components. We consider the problem of component hiding a form of software protection. Component identification is a well studied problem. However, we use component identification as a metric for driving the cost of reverse engineering to an unreasonable level. We contribute to protection of software and circuitry by implementing a Java …

Go to article

Investigating The Use Of Frequency Selective Surfaces In High Power Microwave Applications, Steven M. Pugh Mar 2010

Investigating The Use Of Frequency Selective Surfaces In High Power Microwave Applications, Steven M. Pugh

Theses and Dissertations

This thesis explores new territory with the theoretical investigation of the use of Frequency Selective Surfaces (FSS) in High Power Microwave (HPM) applications. Work was performed in a simulation environment where rectangular and ring-shaped FSS elements were evaluated. Incident electric field levels of 0.5MV/m were propagated toward the FSS in a plane wave that was perpendicular to the surface. Results show that the total electric field in the apertures of the FSS can reach more than 6MV/m. This necessitates the use of high strength dielectric materials surrounding the FSS to reduce the risk of electrical breakdown. It is shown that …

Go to article

Increasing The Sensitivity Of Surface Acoustic Wave (Saw) Chemical Sensors And Other Chemical Sensing Investigations, Nina R. Smith Mar 2010

Increasing The Sensitivity Of Surface Acoustic Wave (Saw) Chemical Sensors And Other Chemical Sensing Investigations, Nina R. Smith

Theses and Dissertations

The work involves the fabrication and testing of three different surface acoustic wave (SAW) device designs, an investigation of nanowires sensitive to chemicals and preconcentrator prototypes to include with chemical sensors. The SAW chemical sensor designs include modifications to a basic SAW device to see if the sensitivity of the SAW device is increased. The modifications consist of etched trenches along the propagation field, coating the device with carbon nanotubes (CNTs) under the chemically sensitive layer and coating CNTs on top of the chemically sensitive layer. SAW devices are coated with Nafion®, a polymer sensitive to ethanol. The tests indicate …

Go to article

Aiding Gps With Additional Satellite Navigation Services, Yasin A. Mutlu Mar 2010

Aiding Gps With Additional Satellite Navigation Services, Yasin A. Mutlu

Theses and Dissertations

In modern warfare navigation services are very important. GPS is currently providing service for accurate navigation, except in some areas, especially urban areas, where GPS signals cannot always be tracked by users. In these cases some additional navigation support could be provided by other global navigation satellite systems. If GPS is combined with other navigation systems than the navigation gap will be minor. In this thesis, the effect of combining GPS with other satellite navigation systems, specifically GLONASS, Galileo and Compass, is evaluated in terms of availability and position dilution of precision (PDOP) values. First, satellite constellations are simulated in …

Go to article

Consideration Of Wear Rates At High Velocity, Chad S. Hale Mar 2010

Consideration Of Wear Rates At High Velocity, Chad S. Hale

Theses and Dissertations

The development of the research presented here is one in which high velocity relative sliding motion between two bodies in contact has been considered. The experimental results of a VascoMax 300 maraging steel slipper sliding on an AISI 1080 steel rail during a January 2008 sled test mission were considered for the determination of high velocity wear rates. The numerical model, based on a metallographic study of a test slipper, contained all of the physical features present in order to adequately characterize high velocity wear rates. Two-dimensional, plane strain models have been implemented in the explicit finite element code, ABAQUS. …

Go to article

Gravity Gradiometry And Map Matching: An Aid To Aircraft Inertial Navigation Systems, Anthony J. Degregoria Mar 2010

Gravity Gradiometry And Map Matching: An Aid To Aircraft Inertial Navigation Systems, Anthony J. Degregoria

Theses and Dissertations

Inertial navigation systems (INS) offer passive, all-weather, and undeniable navigation information, which military customers often view as especially appealing strengths. Unfortunately, Airmen and engineers still struggle with INS’s drifting position errors, and navigation aids generally detract from INS’s strengths. At this year’s Air, Space, and Cyberspace in the 21st Century Conference, the Chief of Staff of the Air Force identified the Global Positioning System (GPS) as a widely-known and exploitable vulnerability, saying that it’s critical the Joint force reduce GPS dependence. Recent advances provide an opportunity for gravity gradient instruments (GGI), which measure spatial derivatives of the gravity vector, to …

Go to article

Effectsof Prior Aging At 260 °C In Argon On Inelastic Deformation Behavior Of Pmr-15 Polymer At 260 °C: Experiment And Modeling, Bradley K. Diedrick Mar 2010

Effectsof Prior Aging At 260 °C In Argon On Inelastic Deformation Behavior Of Pmr-15 Polymer At 260 °C: Experiment And Modeling, Bradley K. Diedrick

Theses and Dissertations

The purpose of this research was to investigate the inelastic deformation behavior of PMR-15 neat resin, a high-temperature polymer, at 260 °C. The experimental program was designed to explore the influence of strain rate on loading and unloading behaviors. In addition, the effect of prior strain rate on creep, relaxation, and recovery responses was evaluated. The material exhibits positive, nonlinear strain rate sensitivity in monotonic loading. Early failures occur before fully establishing inelastic flow. The creep, relaxation, and recovery responses are significantly influenced by prior strain rate. The experimental results suggest the behavior of PMR-15 at 260 °C can be …

Go to article

Numerical Investigation Of Pre-Detonator Geometries For Pde Applications, Robert T. Fievisohn Mar 2010

Numerical Investigation Of Pre-Detonator Geometries For Pde Applications, Robert T. Fievisohn

Theses and Dissertations

A parametric study was performed to determine optimal geometries to allow the successful transition of a detonation from a pre-detonator into the thrust tube of a pulse detonation engine. The study was performed using a two-dimensional Euler solver with progress variables to model the chemistry. The geometrical configurations for the simulations look at the effect of shock reflections, flow obstructions, and detonation diffraction to determine successful geometries. It was observed that there are success and failure rates associated with pre-detonators. These success rates appear to be determined by the transverse wave structure of a stably propagating detonation wave and must …

Go to article

Validation Of A Novel Approach To Solving Multibody Systems Using Hamilton's Weak Principle, Ashton D. Hainge Mar 2010

Validation Of A Novel Approach To Solving Multibody Systems Using Hamilton's Weak Principle, Ashton D. Hainge

Theses and Dissertations

A novel approach for formulating and solving for the dynamic response of multibody systems has been developed using Hamilton’s Law of Varying Action as its unifying principle. In order to assure that the associated computer program is sufficiently robust when applied across a wide range of dynamic systems, the program must be verified and validated. The purpose of the research was to perform the verification and validation of the program. Results from the program were compared with closed-form and numerical solutions of simple systems, such as a simple pendulum and a rotating pendulum. The accuracy of the program for complex …

Go to article

Analysis Of Hybrid-Electric Propulsion System Designs For Small Unmanned Aircraft Systems, Ryan M. Hiserote Mar 2010

Analysis Of Hybrid-Electric Propulsion System Designs For Small Unmanned Aircraft Systems, Ryan M. Hiserote

Theses and Dissertations

Currently fielded electric-powered small unmanned aircraft systems (UAS) lack the endurance desired by warfighters, while their internal combustion engine (ICE) driven counterparts generate mission compromising acoustic and thermal signatures. Parallel hybrid-electric propulsion systems would meet the military’s needs by combining the advantages of hydrocarbon and electric power systems. Three distinct parallel hybrid-electric system designs, each with three unique battery discharging profiles, were analyzed and compared using a constrained static optimization formulation based upon traditional aircraft design equations. Each system combined an ICE sized for cruise speed with an electric motor sized for endurance speed. The nine hybrid variations were compared …

Go to article

Particle Size Control For Piv Seeding Using Dry Ice, Brian T. Love Mar 2010

Particle Size Control For Piv Seeding Using Dry Ice, Brian T. Love

Theses and Dissertations

Particle image velocimetry (PIV) has been carried out using solid carbon dioxide (CO2) particles as the seed material to continue the development of clean seeding for use in large-scale, closed-circuit tunnels. Testing occurred in two wind tunnels at subsonic and supersonic speeds using dry ice particles generated by allowing liquefied CO2 to expand from a small diameter injector tube through a larger diameter shroud tube. The particles were injected into the plenum and discrete solid particles, suitable for PIV measurements, were present in the test section. Data on particle size were first collected using a Malvern particle …

Go to article

A Structural Dynamic Analysis Of A Manduca Sexta Forewing, Travis W. Sims Mar 2010

A Structural Dynamic Analysis Of A Manduca Sexta Forewing, Travis W. Sims

Theses and Dissertations

Micro air vehicles (MAVs) are intended for future intelligence, surveillance, and reconnaissance use. To adequately fulfill a clandestine capacity, MAVs must operate in close proximity to their intended target without eliciting counter-observation. This objective, along with DARPA’s constraint of a sub-15 centimeter span, requires future MAVs to mimic insect appearance and flight characteristics. This thesis describes an experimental method for conducting a structural analysis of a Manduca Sexta (hawkmoth) forewing. Geometry is captured via computed tomography (CT), and frequency data is collected using laser vibrometry in air and vacuum. A finite element (FE) model is constructed using quadratic beams and …

Go to article

Structural Response Of Slotted Waveguide Antenna Stiffened Structure Components Under Compression, Joseph W. Sabat Jr. Mar 2010

Structural Response Of Slotted Waveguide Antenna Stiffened Structure Components Under Compression, Joseph W. Sabat Jr.

Theses and Dissertations

The Slotted Waveguide Antenna Stiffened Structure (SWASS) is an aircraft system that can provide the capabilities of a stiffened panel skin structure and a slotted waveguide radar antenna simultaneously. The system made from carbon fiber reinforced polymers is designed around a 10 GHz radar frequency in the X-band range and uses a WR-90 waveguide as a baseline for design. The system is designed for integration into fuselage or wing sections of intelligence, surveillance, and reconnaissance (ISR) aircraft and would increase the system performance through the availability of increased area and decreased system weight. Elemental parts of the SWASS structure were …

Go to article

Verification Of Kam Theory On Earth Orbiting Satellites, Christian L. Bisher Mar 2010

Verification Of Kam Theory On Earth Orbiting Satellites, Christian L. Bisher

Theses and Dissertations

This paper uses KAM torus theory and Simplified General Perturbations 4 (SGP4) orbit prediction techniques compiled by Dr. William Wiesel and compares it to Analytical Graphics ® Incorporated (AGI) Satellite Toolkit ® (STK) orbit data. The goal of this paper is to verify KAM torus theory can be used to describe and propagate an Earth satellite orbit with similar accuracy to existing general perturbation techniques. Using SGP4 code including only truncated geopotential effects, KAM torus generating code, and other utilities were used to describe a particular satellite orbit as a torus and then propagate the satellite using traditional and KAM …

Go to article

Off-Design Analysis Of A High Bypass Turbofan Using A Pulsed Detonation Combustor, Caitlin R. Thorn Mar 2010

Off-Design Analysis Of A High Bypass Turbofan Using A Pulsed Detonation Combustor, Caitlin R. Thorn

Theses and Dissertations

Past research has indicated that implementation of a pulsed detonation combustor (PDC) into a high-bypass turbofan engine yields a more efficient engine at design conditions. It is proposed that performance gains can be made utilizing this hybrid engine off-design. A hybrid high-bypass turbofan engine with a PDC model was evaluated for a range of Mach numbers, altitudes, and fill fractions in the Numerical Propulsion System Simulation (NPSS). Results were compared to a conventional baseline high-bypass turbofan engine that shares the same architecture with the hybrid. The NPSS baseline engine was validated using the Aircraft Engine Design System (AEDsys) program and …

Go to article

Exfit Flight Design And Structural Modeling For Falconlaunch Viii Sounding Rocket, Michael J. Vinacco Mar 2010

Exfit Flight Design And Structural Modeling For Falconlaunch Viii Sounding Rocket, Michael J. Vinacco

Theses and Dissertations

This research effort furthers the Air Force’s study of reusable launch vehicles and hypersonic airfoils by conducting a hypersonic flight test using the US Air Force Academy’s FalconLAUNCH VIII sounding rocket. In this study, two experimental fin tips were designed and attached to the sounding rocket in place of two stabilizer fins in order to collect data throughout the rocket’s hypersonic flight profile. The desire to research, study, and test experimental fin tips was driven by the Air Force Research Laboratory’s Future responsive Access to Space Technologies (FAST) program and their desire to include vertical stabilizers on the wing tips …

Go to article

Performance Of A Small Internal Combustion Engine Using N-Heptane And Iso-Octane, Cary W. Wilson Mar 2010

Performance Of A Small Internal Combustion Engine Using N-Heptane And Iso-Octane, Cary W. Wilson

Theses and Dissertations

With the sustained interest in Unmanned Aircraft Systems (UAS) and Micro Air Vehicles (MAV), the military services have a real need for vehicles powered by an internal combustion (IC) engine that can run efficiently on heavy hydrocarbon fuels, especially JP-8 due to established logistics. This thesis concerns the results of running a two horsepower, 4-stroke, spark-ignition engine (FUJI BF34-EI) with both iso-Octane and n-Heptane. Results include the knocking characteristic of this engine with n-Heptane, a comparison of the brake specific fuel consumption (BSFC) of the two fuels in a factory delivered engine configuration with a 17x10 APC propeller loading, a …

Go to article

Simulation And Application Of Gpops For Trajectory Optimization And Mission Planning Tool, Danielle E. Yaple Mar 2010

Simulation And Application Of Gpops For Trajectory Optimization And Mission Planning Tool, Danielle E. Yaple

Theses and Dissertations

Rapid trajectory generation is crucial to prompt global warfare. To meet the USAF’s objective of Persistent and Responsive Precision Engagement, a rapid mission planning tool is required. This research creates the framework for the mission planning tool and provides a sample optimal trajectory which is solved using the GPOPS software package. GPOPS employs a Gaussian pseudospectral method to solve the non-linear equations of motion with both end conditions and path constraints. By simultaneously solving the entire trajectory based on an initial guess and small number of nodes, this method is ideal for generating rapid solutions. The sample case is a …

Go to article

First Prev Next Last