Engineering Commons^™

Session 1b, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

• A Nutrient Monitoring Project for the Pennyroyal Ecoregion of Kentucky, Justin Smith, Center for Water Resource Studies, WKU
• Feature Correction Tools Developed for Rural Water District Map Correction, Karla Andrew, Center for Water Resource Studies, WKU
• Bridging the Gap into the Water Industry, Christal Wade, Center for Water Resource Studies, WKU
• Deployment of Sensor Networks for Monitoring Water Quality Using Rule-Based Expert Systems in GIS, Paige Davenport and others, Center for Water Resource Studies, WKU

Session 1a, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

• The Western Deeps – 3D Graphic Models of Deep Aquifers in the Western Coal Field, Andrew Kellie, Dept Industrial & Engineering Technology, Murray State University
• Locating Karst Conduits in Cane Run Watershed of Central Kentucky Using Electrical Resistivity Methods, Junfeng Zhu and others, KGS
• New Groundwater Resources Map for Kentucky, Bart Davidson and Alex Fogle, KGS
• Impact of Rainfall Amount, Intensity, and Time Lag on Leaching Behavior of a Surface-Applied Bromide Tracer, Ole Wendroth and others, Dept. of Plant and Soil Sciences, UK

Plenary Session, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

• Evaluating the Impact of Hemlock Woolly Adelgid Invasion on Headwater Streams, Joshua Adkins and Lynne Reiske-Kinney, Dept of Entomology, UK
• Effects of Roundup^® Exposure on Behavior and Reproductive Function in a Pond-Breeding Salamander, Catherine Aubee and Howard Whiteman, Dept of Biological Sciences, Murray State University

Proceedings Of 2010 Kentucky Water Resources Annual Symposium, Kentucky Water Resources Research Institute, University Of Kentucky

Kentucky Water Resources Annual Symposium

This conference was planned and conducted as part of the state water resources research annual program with the support and collaboration of the Department of the Interior, U.S. Geological Survey and the University of Kentucky Research Foundation, under Grant Agreement Number 06HQGR0087.

The views and conclusions contained in this document and presented at the symposium are those of the abstract authors and presenters and should not be interpreted as necessarily representing the official policies, either expressed or implied, of the U.S. Government or other symposium organizers and sponsors.

Field Monitoring And Hourly Simulation Of Energy And Demand Savings From Use Of The Telkonet Ss5000 System Hotel Ac Occupancy Control, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

Air conditioning and heating control systems were installed in a 56-room hotel in central Florida. Thermostat setpoints in half of the rooms were adjusted when the room was detected to be unoccupied. Heating and cooling energy use was monitored for a period of 9.5 months. Energy and demand savings were analyzed.

Artificial Intelligence: Soon To Be The World’S Greatest Intelligence, Or Just A Wild Dream?, Edward R. Kollett

Academic Symposium of Undergraduate Scholarship

The purpose of the paper was to examine the field of artificial intelligence. In particular, the paper focused on what has been accomplished towards the goal of making a machine that can think like a human, and the hardships that researchers in the field has faced. It also touched upon the potential outcomes of success. Why is this paper important? As computers become more powerful, the common conception is that they are becoming more intelligent. As computers become more integrated with society and more connected with each other, people again believe they are becoming smarter. Therefore, it is important that …

Cold-Formed Steel Bolted Connections Using Oversized And Slotted Holes Without Washers, Phase 2, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

No abstract provided.

Solar Water Heating Performance: Use Of Energy Factors, Florida Solar Energy Center, Carol Emrich

FSEC Energy Research Center®

The goal of increasing solar energy installations is widely accepted by all. The Florida Solar Energy Center (FSEC) concluded that the goal of increasing solar hot water system installations in Florida could be greatly enhanced by concentrating its efforts on new construction through simplification of the residential building energy code. Since implementation in 1980, the Florida Energy Efficiency Code for Building Construction has required a calculation procedure that assigns multipliers to residential water heating systems. The multiplier for every water heating system type except solar is based on the system's rated efficiency at standard conditions and is a one- or …

Slip Boundary Conditions For The Moving Contact Line In Molecular Dynamics And Continuum Simulations, Nikolai V. Priezjev, Anoosheh Niavarani

Mechanical and Materials Engineering Faculty Publications

The problem of the moving contact line between two immiscible fluids on a smooth surface is revisited using molecular dynamics (MD) and continuum simulations. In MD simulations a finite slip is allowed by choosing incommensurate wall-fluid densities and weak wall-fluid interaction energies. The shear stresses and velocity fields are extracted carefully in the bulk fluid region as well as near the moving contact line. In agreement with previous studies, we found slowly decaying partial slip region away from the contact line. In steady-state shear flows we extract the friction coefficient along the liquid-solid interface, the local slip length, and the …

Syngas Fermentation: Quantification Of Assay Techniques, Reaction Kinetics, And Pressure Dependencies Of The Clostridial P11 Hydrogenase, Bradley E. Skidmore

Theses and Dissertations

Ethanol usage as a transportation fuel is rapidly increasing in the United States. Production of ethanol from cellulose feedstocks via gasification followed by syngas fermentation offers an environmentally friendly approach that mitigates many of the adverse effects associated with production from corn. In the syngas fermentation process, the hydrogenase enzyme of the fermentation bacterium, Clostridium P11 for this work, supplies electrons to the metabolic pathway, facilitating ethanol production. In this thesis, an assay for P11 hydrogenase activity was developed. It was determined that 1) less than 4 minutes of sparging with 50 sccm H2 is needed to reduce O2 levels …

Evaluation Of Alternative Formulae For Calculation Of Surface Temperature In Snowmelt Models Using Frequency Analysis Of Temperature Observations, C. H. Luce, David G. Tarboton

Civil and Environmental Engineering Faculty Publications

The snow surface temperature is an important quantity in the snow energy balance, since it modulates the exchange of energy between the surface and the atmosphere as well as the conduction of energy into the snowpack. It is therefore important to correctly model snow surface temperatures in energy balance snowmelt models. This paper focuses on the relationship between snow surface temperature and conductive energy fluxes that drive the energy balance of a snowpack. Time series of snow temperature at the surface and through the snowpack were measured to examine energy conduction in a snowpack. Based on these measurements we calculated …

Compression Testing Of Composite Laminated Foam Under Thermal Loading And With Central Holes, Dominic Surano, Jonathan Russo, Daniel Leighton

Aerospace Engineering

A study was conducted to investigate the effect of heat on composite sandwich plates, fabricated with the vacuum resin infusion process, with center holes of varying diameters. The study involved conventional notched specimens and notched specimens with shear keys, both of which were subjected to monotonic inplane compression loading. Hole diameter was be varied from one to four inches in one inch increments. Loading rate was applied using the Instron machine at one millimeter per minute. The diameter of the shear key around the holes varied from one inch to four inches in one inch increments. The specimens were placed …

Processing A Nickel Nanostrand And Nickel Coated Carbon Fiber Filled Conductive Polyethylene By Injection Molding, David Anthony Whitworth

Theses and Dissertations

A new method for pre-impregnating nickel coated carbon fiber with a thermoplastic polymer to make towpreg, similar to a recently developed coating-line by João P. Nunes et al and a new electrically conductive thermoplastic are developed. A melted bath was used to help mitigate health concerns and waste for dispersion of nickel coated carbon fibers (NCF) in low density polyethylene (LDPE). This towpreg was then mixed with more LDPE or a mixture of LDPE and nickel nanostrands (NiNS) to a desired filler volume fraction to test the electrical conductivity of the composite. Some of these mixtures were then injection molded …

Optimal Design Of A Planar 3-Rpr Haptic Interface Based On Manipulability, Wesley Kay Harris

Theses and Dissertations

A haptic interface is a robotic force feedback device that provides a sense of touch to users of virtual reality simulations. This thesis presents a general method for the design optimization of parallel planar haptic devices based on maximizing the manipulability of the interface over its workspace. Manipulability is selected as the key design objective to ensure avoidance of singular configurations within the workspace and to maximize the interface's ability to generate feedback forces and torques in each direction in each handle location and orientation. The optimization approach developed in this thesis results in a set of candidate designs that …

Evaluation Of The Accuracy Of The Incremental Queue Accumulation Delay Estimation Method, Yaye Mallon Keita

Theses and Dissertations

Knowing the performance of intersections is of utmost importance to engineers today. It affects the development, advancement, and future economic growth status of the city or place in which the intersections are located. The performance level is inferred from the levels of service of the intersections and one common way to measure the levels of service is to estimate delays for those intersections. Therefore, the estimation of delays at intersections is a very recurrent study done by traffic engineers. Different methods of calculating delays exist. Those methods are not ideal for estimating delay for all cases. The call for better …

Development Of A Plasma Arc Manufacturing Process And Machine To Create Metal Oxide Particles In Water From Wire Feedstock, Jonathan Alan George

Theses and Dissertations

A plasma arc erosion process can be used to create metal and metal oxide particles in the ultra-fine size range (<70 µm). An electric arc is struck between two metallic electrodes, submerged in water, melting the surface of the electrodes. When the arc collapses a high energy pressure wave strikes the molten surface of the electrode. When the pressure wave strikes the molten metal, small metallic particles are created from the molten metal and are immediately cooled in the water. Previous research developed a process that used a constant current power supply and electrode motion to create ultra-fine particles. This research improves upon previous research by using a pulsed power supply similar to those used in Electrical Discharge Machining (EDM). The pulsed power supply eliminates the need for electrode motion and improves the rate of particle production, provides control over size of the particles created, and reduces the amount of energy needed to produce the particles. The new process improves the maximum particle production rate from 3.6 g/hr to 14 g/hr, provides a method to control the mean diameter of the particles produced, and reduces the amount of energy needed from 200 kWh/kg(previous constant current process) to 10.6 kWh/kg(using the pulsed power supply).

Investigation Of Rf Curing Parameters In Resin Infusion Molding, Christopher K. Love

Theses and Dissertations

The purpose of this study is to investigate RF or Radio Frequency energy as a viable alternative to traditional heating methods for the purpose of curing resins used in resin infusion molding, a molding system for polymeric composites. Traditional heating/curing methods include technologies such as room temperature, oven, microwave, infrared, and ultraviolet. Although RF curing provides far more advantages than disadvantages, its implementation into a manufacturing process can be challenging. Specifically, three critical elements must be present in order for RF to function in a manner that is profitable to the manufacturer. Those elements are: (1) the proper generator (voltage …

East Bay Energy Consortium Joint Committee Workshop At Bristol Town Hall, Burnside Building, Meeting Notes, March 15, 2010, East Bay Energy Consortium

East Bay Energy Consortium Meeting Minutes

No abstract provided.

The Control Of Rotor Side And Grid Side Converters In A Dfig During Network Voltage Unbalance Conditions Using Resonant Current Controllers., Joseph Kearney, Michael Conlon, Eugene Coyle

Conference papers

This paper implements control techniques to enable improved operation of DFIG’s when subjected to the effects of network voltage unbalance conditions. The control scheme involves the integration of a resonant regulator into the PI controllers of both the rotor side and grid side converters in a DFIG. The resonant controller is tuned to twice the network frequency (2ω_e) and designed to mitigate against the oscillations in a DFIG due to network voltage unbalance conditions. The grid side converter controller also incorporates a second resonant controller tuned to three times the grid frequency (3ω_e) to alleviate the …

An Enhanced Data Model And Tools For Analysis And Visualization Of Levee Simulations, Thomas Richard Griffiths

Theses and Dissertations

The devastating levee failures associated with hurricanes Katrina and Rita, and the more recent Midwest flooding, placed a spotlight on the importance of levees and our dependence on them to protect life and property. In response to levee failures associated with the hurricanes, Congress passed the Water Resources Development Act of 2007 which established a National Committee on Levee Safety. The committee was charged with developing recommendations for a National Levee Safety Program. The Secretary of the Army was charged with the establishment and maintenance of a National Levee Database. The National Levee Database is a critical tool in assessing …

Measuring Variations Of Mimicry By Means Of Prosodic Cues In Task-Based Scenarios And Conversational Speech, Brian Vaughan, Celine De Looze

Other resources

Here, we address the measurement of mimicry, that is when speakers’ speech variations look like parallel patterns.

As a definition of mimicry, we often read in the literature description such as mimicry is “The situation where the observed behaviours of two inter-actants although dissimilar at the start of the interaction are moving towards behavioral matching”. These types of descriptions imply that mimicry is a linear phenomenon and that speakers tend to imitate over time. However, it can be assumed, especially when studying spontaneous speech, that there are rather phases of mimicry and non-mimicry and that mimicry should be rather …

Aerial Recovery Of Micro Air Vehicles: Orbit Estimation And Tracking, Daniel Clarke Carlson

Theses and Dissertations

Aerial recovery of autonomous micro air vehicles (MAVs) presents many unique challenges due to the difference in size and speed of the recovery vehicle and MAV. This thesis presents algorithms to enable an autonomous MAV to estimate the orbit of a recovery vehicle and track the orbit until the final docking phase. Methods for estimating ellipses that are rotated out of the x − y plane are developed and demonstrated through simulation. These algorithms are shown to be robust to noise and stable numerically. Parameter update methods that are computationally inexpensive, such as recursive least squares and Kalman filtering, are …

Recognizing Parametric Geometry From Topology Optimization Results, Shane H. Larsen

Theses and Dissertations

Topology Optimization has been proven to be a useful tool in discovering non-intuitive optimal designs subject to certain design constraints. The results of Topology Optimization are either represented as a tessellation object composed of thousands of triangular surfaces, or as a point cloud. In either case, the results of Topology Optimization are not suited for use in subsequent steps of the design process which require 3D parametric CAD (Computer Aided Design) models. Converting Topology Optimization results into parametric CAD geometry by hand is an extremely tedious and time consuming process which is highly subjective. This thesis presents a shape recognition …

Automatic Identification And Tracking Of Retraction Fibers In Time-Lapse Microscopy, Meher Talat Shaikh

Theses and Dissertations

Digital image processing is widely used in the field of time-lapse microscopy and biological research to provide statistical data of cellular dynamics. The data can provide more comprehensive understanding of the molecular phenomenon. Further, digital image processing enables rapid and consistent quantification of qualitative observations. The image processing model examined here provides a study to identify structures called retraction fibers (RFs) that are formed during epithelial-mesenchymal transition (EMT) [1], an important developmental process which also occurs during cancer metastasis. Quantifying RF formation is an important task for biologists studying cellular regulation of EMT. This thesis work uses digital image processing …

Ceas E-News 03.11.2010, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

CEAS offers design and more to Plainwell Visions' fifth-graders

Structure-Property Relationship In Ionomer Membranes, Ahmet Kusoglu, Anette M. Karlsson, Michael H. Santare

Mechanical Engineering Faculty Publications

Perfluorosulfonic acid (PFSA) ionomer membranes are ion-conducting polymers with high water sorption capacity and thermo-mechanical stability. The morphology of PFSA changes during sorption affecting the mechanical and physical properties of the membrane. In this work, we investigate the structure-property relationship in swollen PFSA membranes using three proposed nanostructural descriptions and determine Young's modulus of the membrane at a wide range of temperatures (−20–85°C) and water volume fractions (0–0.5) for these configurations. Comparing the mechanics-based models with experimental data we propose that ion-rich water domains in PFSA membrane are spherical at low water content, spherical with connecting channels at intermediate water …

Generalized Image Formation For Pulsed And Lfm-Cw Synthetic Aperture Radar, Evan C. Zaugg

Theses and Dissertations

Approximations made in the traditional signal model for synthetic aperture radar (SAR) processing cause defocusing of the radar images when the system operates under conditions where the approximations lose validity. This dissertation investigates a number of these approximations and presents algorithmic improvements based on generalizations of the approxmations of the SAR signal model. These improvements result in better focused imagery from SAR systems with varied designs and parameters. Among the advancements presented is the development of a generalized chirp-scaling algorithm and a generalized frequency scaling algorithm to address the problems caused by approximations based on a Taylor series expansion of …

Design Method For Optimized Wideband Iterative Differential Amplifier In Mos Technology, Steven L. Minch

Theses and Dissertations

Wideband amplifiers are an important part of analog design, and much effort has been expended in improving them. A popular implementation of a wideband amplifier is to use one or two stages with high gain in one or both stages. An alternative to this method is presented in this work, developed for Metal Oxide Semiconductor (MOS) amplifiers. The new approach, building on previous work in bipolar technology, uses multiple differential MOS stages to achieve similar gain requirements to other wideband amplifiers. It is shown that multiple stages with low gain, if implemented according to the present design method, can lead …

Real Time Fault Detection And Diagnostics Using Fpga-Based Architecture, Nathan P. Naber

Theses and Dissertations

Errors within circuits caused by radiation continue to be an important concern to developers. A new methodology of real time fault detection and diagnostics utilizing FPGA based architectures while under radiation were investigated in this research. The contributions of this research are focused on three areas; a full test platform to evaluate a circuit while under irradiation, an algorithm to detect and diagnose fault locations within a circuit, and finally to characterize Triple Design Triple Modular Redundancy (TDTMR), a new form of TMR. Five different test setups, injected fault test, gamma radiation test, thermal radiation test, optical laser test, and …

Reputation-Based Trust For A Cooperative, Agent-Based Backup Protection Scheme For Power Networks, John F. Borowski

Theses and Dissertations

This thesis research explores integrating a reputation-based trust mechanism with an agent-based backup protection system to improve the performance of traditional backup relay methods that are currently in use in power transmission systems. Integrating agent technology into relay protection schemes has been previously proposed to clear faults more rapidly and to add precision by enabling the use of adaptive protection methods. A distributed, cooperative trust system such as that used in peer-to-peer file sharing networks has the potential to add an additional layer of defense in a protection system designed to operate with greater autonomy. This trust component enables agents …