Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2010

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 3121 - 3150 of 5382

Full-Text Articles in Engineering

Design Analysis Of A Sapce Based Chromotomographic Hyperspectral Imaging Experiment, Todd A. Book Mar 2010

Design Analysis Of A Sapce Based Chromotomographic Hyperspectral Imaging Experiment, Todd A. Book

Theses and Dissertations

This research develops the design of several components and/or systems for an experimental space-based chromotomographic hyperspectral imager that is being built by the Air Force Institute of Technology. The design work includes three separate topics. The first topic was the development of a structure utilizing finite element analysis and eigenanalysis for the ground-based version of the chromotomographic experiment (CTEx). The ground-based experiment was performed as a risk mitigation measure for the space-based experiment. The second topic includes a design review of a contractor's proposed off-axis Mersenne telescope for the space-based chromotomographic hyperspectral imager. The work included the creation of preliminary …

Go to article

Attitude Control Of A Satellite Simulator Using Reaction Wheels And A Pid Controller, Ryan E. Snider Mar 2010

Attitude Control Of A Satellite Simulator Using Reaction Wheels And A Pid Controller, Ryan E. Snider

Theses and Dissertations

Attitude requirements of a satellite are determined by its mission: telecommunications, optical imagery, and meteorology to name a few. A satellite's ability to orient its mission critical hardware (solar arrays, attitude sensors, etc.), as well as its mission specific payload, is incumbent upon the performance of the satellite's attitude control system (ACS). For a highly accurate ACS and for moderately fast maneuverability, reaction wheels are preferred because they allow continuous and smooth control while inducing the smallest possible disturbance torques. The objective of this research is to design, build, test, and evaluate the performance of a reaction wheel ACS on-board …

Go to article

Investigation Of A Novel Compact Vibration Isolation System For Space Applications, Steven D. Miller Mar 2010

Investigation Of A Novel Compact Vibration Isolation System For Space Applications, Steven D. Miller

Theses and Dissertations

A novel compact vibration isolation system was designed, built, and tested for the Space Chromotomography Experiment (CTEx) being built by Air Force Institute of Technology (AFIT) researchers. CTEx is a multifunctional experimental imaging chromotomographic spectrometer designed for flight on the International Space Station (ISS) and is sensitive to jitter caused by vibrations both through the support structure as well as those produced on the optical platform by rotating optical components. CTEx demands a compact and lightweight means of vibration isolation and suppression from the ISS structure. Vibration tests conducted on an initial isolator design resulted in changes in the chosen …

Go to article

Estimating Characteristics Of A Maneuvering Reentry Vehicle Observed By Multiple Sensors, Evan M. Brooks Mar 2010

Estimating Characteristics Of A Maneuvering Reentry Vehicle Observed By Multiple Sensors, Evan M. Brooks

Theses and Dissertations

Post flight analysis of ballistic missile reentry vehicles is an area of focus for the U.S. Government, especially for those involved in ballistic missile defense. Typically, this analysis incorporates either a model-driven least squares filter or a data-following Kalman filter. The research performed here developed a filter that attempts to integrate the strengths of both filters. A least squares filter operates on observation data collected during exoatmospheric free flight and a Kalman filter is used to analyze data collected lower in the atmosphere, where potential maneuvers could be performed. Additionally, the filter was written to incorporate data from multiple sensors. …

Go to article

Prototype Development And Dynamic Characterization Of Deployable Cubesat Booms, Grant M. Thomas Mar 2010

Prototype Development And Dynamic Characterization Of Deployable Cubesat Booms, Grant M. Thomas

Theses and Dissertations

The current barrier to CubeSat proliferation is their lack of utility depth. These small satellites are exceptionally well suited for specific space missions such as space weather observation and other scientific data gathering exploits; however, they are not suited for every mission. The 10cm-cube form factor that gives the CubeSat its unique advantage is also its greatest hindrance. A potential bridge over this gap is the successful integration of deployable booms onto the CubeSat structure. With this research, the Air Force Institute of Technology (AFIT) explored the parameters of deployable tapespring booms using the triangular retractable and collapsible (TRAC) cross- …

Go to article

Preliminary Electrical Designs For Ctex And Afit Satellite Ground Station, Arthur L. Morse Mar 2010

Preliminary Electrical Designs For Ctex And Afit Satellite Ground Station, Arthur L. Morse

Theses and Dissertations

This thesis outlines the design of the electrical components for the space-based ChromoTomography Experiment (CTEx). CTEx is the next step in the development of high-speed chromotomography at the Air Force Institute of Technology. The electrical design of the system is challenging due to the large amount of data that is acquired by the imager and the limited resources that is inherent with space-based systems. Additional complication to the design is the need to know the angle of a spinning prism that is in the field of view very precisely for each image. Without this precise measurement any scene that is …

Go to article

Accurate Dynamic Response Predictions Of Pnpsat I, Michael D. Trottier Mar 2010

Accurate Dynamic Response Predictions Of Pnpsat I, Michael D. Trottier

Theses and Dissertations

Researchers at the Air Force Institute of Technology (AFIT) and the Operationally Responsive Space (ORS) Office have conducted extensive vibration testing and structural modeling on the first ORS Plug-and-Play Satellite (PnPSAT I). The intent of this research effort is to evaluate the premise that current post-integration spacecraft environmental test requirements can be reduced or modified using accurately tuned finite element (FE) models. As part of this research, modal testing was conducted on the PnPSAT I structural panels at AFIT. The modal testing was part of a much larger series of experimental trials on various configurations of PnPSAT I at the …

Go to article

Development Of A Remotely Operated Autonomous Satellite Tracking System, Michael E. Graff Mar 2010

Development Of A Remotely Operated Autonomous Satellite Tracking System, Michael E. Graff

Theses and Dissertations

AFIT is currently developing a capability to remotely and autonomously track LEO satellites using commercial telescopes. Currently, the system is capable of open-loop tracking based on Two-Line Element sets (TLEs) downloaded from NORAD’s space object catalog. The ability to actively track using a closed-loop control system would allow tracking of satellites which deviated from the published TLEs along with providing some information about the object’s new orbital elements. To accomplish closed-loop tracking, the object is imaged by a digital camera connected to a wide field-of-view (WFOV) spotting scope. Software was developed to provide azimuth and elevation inputs in order to …

Go to article

A Simulation Based Methodology To Examine The B-1b'S An/Alq-161 Maintenance Process, Ricardo R. Garza Mar 2010

A Simulation Based Methodology To Examine The B-1b'S An/Alq-161 Maintenance Process, Ricardo R. Garza

Theses and Dissertations

The B-1 Bomber is the Air Force’s only supersonic, conventional-only strike platform. This thesis looks at the maintenance procedures associated with the defensive electronic counter measure (ECM) system on the B-1B, designated the AN/ALQ-161. Computer simulation of the current line-replaceable-unit maintenance network for Ellsworth AFB and Dyess AFB is modeled. In addition, two hypothetical repair networks are proposed and analyzed. This research considers the applicability of this type of computer simulation, using ARENA software to study the AN/ALQ-161 repair system. The contribution of this research is a discrete simulation methodology specific to the AN/ALQ-161 LRU repair line. Two response variables …

Go to article

Hard Collisions In Rubidium Using Sub-Doppler Spectroscopy, Douglas E. Thornton Mar 2010

Hard Collisions In Rubidium Using Sub-Doppler Spectroscopy, Douglas E. Thornton

Theses and Dissertations

To better understand the laser kinetics of an alkali gain medium, hard collisions, or velocity-changing collisions, has been studied and a velocity-changing collisional rate has been calculated. Previous works have studied these collisions, but no rate has been calculated. Using the precise tool of sub-Doppler spectroscopy, atomic hard collisions can be observed. The collected spectra are fitted with two different line shapes to demonstrate the accuracy of this method. From the fits, the number of hard collisions can be extracted. The time scale of the hard collisions in rubidium is interpolated by varying the chopping frequency of the pump beam, …

Go to article

Simulation Analysis Of High Velocity Maintenance For The B-1b, Anson R. Park Mar 2010

Simulation Analysis Of High Velocity Maintenance For The B-1b, Anson R. Park

Theses and Dissertations

This thesis explores the impact that High Velocity Maintenance (HVM) will have on aircraft availability rates for the B-1B by examining the proposed changes to the field maintenance and supply processes for the two B-1B squadrons of the 28th Bombardment Wing located at Ellsworth AFB, SD. There is a significant restructuring of depot level maintenance planned with the implementation of HVM, and the impact that this will have on base-level operations is important to determine, for it will provide insight as to whether or not HVM will be a feasible program with a high probability of successfully improving B-1B aircraft …

Go to article

Development Of Measures To Assess Product Modularity And Reconfigurability, Amie C. Stryker Mar 2010

Development Of Measures To Assess Product Modularity And Reconfigurability, Amie C. Stryker

Theses and Dissertations

Several fundamental benefits of modularity are agreed upon by industry including reusability, flexibility, reconfigurability and extensibility. Interfaces within or between modules which establish provide/depend relationships are the focus of current modularity measures. This research outlines a new method and measures for assessing product modularity in terms of degree of coupling and the recognized modularity benefits. A five–step analysis process is developed and used to guide the modularity assessment. Defining and decomposing products are performed first. Using the resultant functional model from the first step, the identified functions are mapped to modules in a product in the second step. In the …

Go to article

Cca: Exploratory Case Study Of Construction In A Contingency Environment, Michael J. Pluger Mar 2010

Cca: Exploratory Case Study Of Construction In A Contingency Environment, Michael J. Pluger

Theses and Dissertations

Top military leadership has identified problems with the timeliness and effectiveness of DoD contingency construction support. Qualitative data was collected in order to gain clarity on the problem space and lay a foundation for solution generation and selection. Interviews were conducted with agents with experience within the Iraq and Afghanistan theater of operation as well as support functions for the Pentagon. Commanders, Engineers, Lawyers, Acquisition Attorneys, Staff Officers and Program Managers have been interviewed. The interviews have been analyzed using open coding to answer research question and identify to emergent themes and concepts. The data collected has revealed that Contingency …

Go to article

Nitrogen And Phosphorus Biomass-Kinetic Model For Chlorella Vulgaris In A Biofuel Production Scheme, William M. Rowley Mar 2010

Nitrogen And Phosphorus Biomass-Kinetic Model For Chlorella Vulgaris In A Biofuel Production Scheme, William M. Rowley

Theses and Dissertations

Chlorella vulgaris was cultured in microbioreactors using Bold’s Basal medium at varying nitrogen and phosphorus concentrations to define nitrogen and phosphorus utilization standards. Nutrient concentration was varied between 137 mg/L to 7.33 mg/L NO3-N and between 55.2 mg/L to11.0 mg/L PO4-P in five test scenarios. All were grown under a constant photoperiod at 22±2 °C and a mixture of 4 to 10% carbon dioxide/air. Maximum yield and growth rate occurred with the highest initial nitrogen and phosphorus concentrations. A statistically significant difference in biomass was found among all test levels at the end of the eight day growth period. Applying …

Go to article

Part Count: Monolithic Part Effects On Manufacturing Labor Cost, An Aircraft Applied Model, Aaron M. Lemke Mar 2010

Part Count: Monolithic Part Effects On Manufacturing Labor Cost, An Aircraft Applied Model, Aaron M. Lemke

Theses and Dissertations

There are significantly different manufacturing processes and part counts associated with composites that are not currently addressed within the aircraft procurement and life cycle management processes in the Department of Defense (DoD). A series of affordability initiatives have culminated in significant evidence over the last decade to better quantify the impact of primarily composite structures in aircraft. An Air Force Research Laboratory program, Advanced Composite Cargo Aircraft (ACCA), provides substantial support for the impact of part size on life cycle cost for payload aircraft. This research evaluates select methods used and seeks to introduce modifications to the projected manufacturing hours …

Go to article

Development Of Morphing Aircraft Structure Using Smp, Soo-Chan Jee Mar 2010

Development Of Morphing Aircraft Structure Using Smp, Soo-Chan Jee

Theses and Dissertations

The U.S Air Force needs new aircraft which provide longer flight time, less fuel consumption, better aerodynamics in order to perform Air Force missions successfully as the mission environment changes rapidly. A morphing wing aircraft is considered as a potential new aircraft for those missions. This thesis explores Shape Memory Polymer (SMP) properties test results and its application for morphing wing skin. Several SMP composite laminates were considered for investigating shape changing characteristics required for morphing skin. The braided composite preforms used in making SMP composites were explored in morphing wing operating system based on the results of property tests. …

Go to article

Optical And Electrical Characterization Of Bulk Grown Indium-Gallium-Arsenide Alloys, Austin C. Bergstrom Mar 2010

Optical And Electrical Characterization Of Bulk Grown Indium-Gallium-Arsenide Alloys, Austin C. Bergstrom

Theses and Dissertations

Advances in crystal growth techniques have allowed increased quality in growth of bulk ternary InxGa1-xAs. Here, the optical and electrical properties of samples grown through the vertical Bridgman (or multi-component zone melting growth) method have been investigated through photoluminescence spectroscopy and Hall effect measurements. Indium mole fractions varied from 0.75 for 1. Hall effect measurements at temperatures ranging from 10 to 300 K revealed moderate n-type doping with carrier concentrations ranging from 1.5 to 9.6×1016 cm-3 at 10 to 15 K. Carriers from deep donor levels became appreciable between 50 and 100 K. Hall …

Go to article

Optical Properties Of Si, Ge, Gaas, Gasb, Inas, And Inp At Elevated Temperatures, Thomas R. Harris Mar 2010

Optical Properties Of Si, Ge, Gaas, Gasb, Inas, And Inp At Elevated Temperatures, Thomas R. Harris

Theses and Dissertations

Investigation of the optical and electrical behavior of some semiconductors at very high temperatures has not been an area of much study, at least not experimentally. The importance of such research becomes obvious due to the effects of high temperatures on semiconductor devices such as infrared detectors and light emitters. Besides the destructive effects of thermal stress and melting, changes in the optical properties of the material can greatly affect device performance. In this research, the infrared absorption of Si, Ge, GaAs, GaSb, InAs, and InP was measured from 0.6 to 25 μm at temperatures ranging from 295 up to …

Go to article

Development And Demonstration Of A Field-Deployable Fast Chromotomographic Imager, Daniel C. O'Dell Mar 2010

Development And Demonstration Of A Field-Deployable Fast Chromotomographic Imager, Daniel C. O'Dell

Theses and Dissertations

A field deployable hyperspectral imager utilizing chromotomography (CT), with a direct vision prism (DVP) as the dispersive element, has been constructed at AFIT. This research is focused on the development and demonstration of the CT imager. An overview of hyperspectral imaging, chromotomography, a synopsis of reconstruction algorithms, and other CT instruments are given. The importance of component alignment, instrument calibration, and exact prism angular position data are discussed. A simplistic \shift and add" reconstruction algorithm was utilized for this research. Although limited in its ability to reconstruct a spatially and spectrally diverse scene, the algorithm was adequate for the testing …

Go to article

Gadolinium Oxide/Silicon Thin Film Heterojunction Solid-State Neutron Detector, Christopher M. Young Mar 2010

Gadolinium Oxide/Silicon Thin Film Heterojunction Solid-State Neutron Detector, Christopher M. Young

Theses and Dissertations

The internal conversion electron emission from the de-excitation of the Gd-158m nucleus was explored as a means for neutron detection. Thin film gadolinium oxide (Gd2O3) and p-type silicon heterojunction diodes were produced using a supercritical water deposition process. Pulse height spectroscopy was conducted on the novel diodes while they were subjected to a moderated plutonium-beryllium (PuBe) source flux of 104 thermal neutrons/cm2 s. Coincident gamma spectroscopy was employed to verify the 1107.6 keV photon emissions from the diode indicative of successful neutron capture by Gd-157 and the subsequent de-excitation of the Gd-158m nucleus. Neutron …

Go to article

A Linear Finite Element Acoustic Fluid-Structure Model Of Ultrasonic Angioplasty In Vivo, Mark Wylie, Garrett Mcguinness, Graham Gavin Mar 2010

A Linear Finite Element Acoustic Fluid-Structure Model Of Ultrasonic Angioplasty In Vivo, Mark Wylie, Garrett Mcguinness, Graham Gavin

Articles

The delivery of high-power ultrasonic energy via small diameter wire waveguides represents a new alternative therapy for the treatment of chronic totally occluded arteries (CTOs). This type of energy manifests itself as a mechanical vibration at the distal-tip of the waveguide with amplitudes of vibration up to 60 µm and at frequencies of 20- 50 kHz. Disruption of diseased tissue is reported to be a result of direct mechanical ablation, cavitation, pressure components and acoustic streaming and that ablation was only evident above the cavitation threshold. This work presents a linear finite element acoustic fluid-structure model of an ultrasonic angioplasty …

Go to article

Synchronization Voter Insertion Algorithms For Fpga Designs Using Triple Modular Redundancy, Jonathan Mark Johnson Mar 2010

Synchronization Voter Insertion Algorithms For Fpga Designs Using Triple Modular Redundancy, Jonathan Mark Johnson

Theses and Dissertations

Triple Modular Redundancy (TMR) is a common reliability technique for mitigating single event upsets (SEUs) in FPGA designs operating in radiation environments. For FPGA systems that employ configuration scrubbing, majority voters are needed in all feedback paths to ensure proper synchronization between the TMR replicates. Synchronization voters, however, consume additional resources and impact system timing. This work introduces and contrasts seven algorithms for inserting synchronization voters while automatically performing TMR. The area cost and timing impact of each algorithm on a number of circuit benchmarks is reported. The work demonstrates that one of the algorithms provides the best overall timing …

Go to article

Particle Image Velocimetry Analysis On The Effects Of Stator Loading On Transonic Blade-Row Interactions, Scott B. Reynolds Mar 2010

Particle Image Velocimetry Analysis On The Effects Of Stator Loading On Transonic Blade-Row Interactions, Scott B. Reynolds

Theses and Dissertations

Experiments have been performed using the Air Force Research Laboratory (AFRL) Blade-Row Interaction (BRI) rig to investigate interactions between a loaded stator and transonic rotor. The BRI rig is a high-speed, highly loaded compressor consisting of a swirler/deswirler, a transonic rotor and a stator. The swirler/deswirler of the BRI rig is used to simulate an embedded transonic fan stage with realistic geometry which produces a wake through diffusion. Details of the unsteady flow field between the stator and rotor were obtained using Particle Image Velocimetry (PIV). Flow visualization images and PIV data that facilitate analysis of vortex shedding, wake motion, …

Go to article

Spectrally-Temporally Adapted Spectrally Modulated Spectrally Encoded (Smse) Waveform Design For Coexistent Cr-Based Sdr Applications, Eric C. Like Mar 2010

Spectrally-Temporally Adapted Spectrally Modulated Spectrally Encoded (Smse) Waveform Design For Coexistent Cr-Based Sdr Applications, Eric C. Like

Theses and Dissertations

This work expands the applicability of the Spectrally Modulated, Spectrally Encoded (SMSE) framework by developing a waveform optimization process that enables intelligent waveform design. The resultant waveforms are capable of adapting to a spectrally diverse transmission channel while meeting coexistent constraints. SMSE waveform design is investigated with respect to two different forms of coexisting signal constraints, including those based on resultant interference levels and those based on resultant power spectrum shape. As demonstrated, the SMSE framework is well-suited for waveform optimization given its ability to allow independent design of spectral parameters. This utility is greatly enhanced when soft decision selection …

Go to article

Flexible Computing Architecture For Real Time Skin Detection, Matthew P. Hornung Mar 2010

Flexible Computing Architecture For Real Time Skin Detection, Matthew P. Hornung

Theses and Dissertations

In both the Air Force and Search and Rescue Communities, there is a current need to detect and characterize persons. Existing methods use red-green-blue (RGB) imagery, but produce high false alarm rates. New technology in multi-spectral skin detection is better than the existing RGB methods, but lacks a control and processing architecture to make them efficient for real time problems. We hypothesize that taking a minimalistic approach to the software design, we can perform image preprocessing, feature computation, and skin detection in real time. A number of applications require accurate detection and characterization of persons, human measurement and signature intelligence …

Go to article

Multi-Objective Constraint Satisfaction For Mobile Robot Area Defense, Kenneth W. Mayo Mar 2010

Multi-Objective Constraint Satisfaction For Mobile Robot Area Defense, Kenneth W. Mayo

Theses and Dissertations

In developing multi-robot cooperative systems, there are often competing objectives that need to be met. For example in automating area defense systems, multiple robots must work together to explore the entire area, and maintain consistent communications to alert the other agents and ensure trust in the system. This research presents an algorithm that tasks robots to meet the two specific goals of exploration and communication maintenance in an uncoordinated environment reducing the need for a user to pre-balance the objectives. This multi-objective problem is defined as a constraint satisfaction problem solved using the Non-dominated Sorting Genetic Algorithm II (NSGA-II). Both …

Go to article

Analysis Of A Rumor Routing Protocol With Limited Packet Lifetimes, Peter R. Francik Mar 2010

Analysis Of A Rumor Routing Protocol With Limited Packet Lifetimes, Peter R. Francik

Theses and Dissertations

Wireless sensor networks require specialized protocols that conserve power and minimize network traffic. Therefore, it is vitally important to analyze how the parameters of a protocol affect these metrics. In doing so, a more efficient protocol can be developed. This research evaluates how the number of nodes in a network, time between generated agents, lifetime of agents, number of agent transmissions, time between generated queries, lifetime of queries, and node transmission time affect a modified rumor routing protocol for a large-scale, wireless sensor network. Furthermore, it analyzes how the probability distribution of certain protocol parameters affects the network performance. The …

Go to article

Artificial Inhomogeneous Tapered Impedance Sheet Characterization And Applications, Jeffrey P. Massman Mar 2010

Artificial Inhomogeneous Tapered Impedance Sheet Characterization And Applications, Jeffrey P. Massman

Theses and Dissertations

The ability to manipulate a complex impedance sheet about a PEC or general dielectric cylinder of arbitrary diameter to control the overall scattering characteristics at particular angles for shielding or scattering applications is presented. It is shown that with the capability to readily control both the real and imaginary components of a percolated lossy film's effective impedance, specific impedance distributions can be obtained to effectively direct the overall nulls in the bistatic scattering pattern. The exact approach only requires negligible truncation error of the matrix solution and can be applied to cylinders of arbitrary size. This approach relies on general …

Go to article

Disturbance Observer: Design And Flight Test Of A Large Envelope Flight Controller, Donevan A. Rein Mar 2010

Disturbance Observer: Design And Flight Test Of A Large Envelope Flight Controller, Donevan A. Rein

Theses and Dissertations

A new flight controller was evaluated through piloted simulation and flight test conducted at the USAF Test Pilot School. The controller, commonly called a disturbance observer, uses inertial sensor feedback routed through a simple control architecture that acts to force the desired response while rejecting sensor noise and atmospheric disturbances. The investigation included both handling qualities testing in the Octonian simulator at the Air Force Research Laboratories Air Vehicle Directorate, and initial flight test conducted as part of a Test Management Project at the USAF TPS. Simulation produced positive results with desired performance throughout a wide flight envelope. In addition, …

Go to article

Minimizing Losses In A Space Laser Power Beaming System, Charlie T. Bellows Mar 2010

Minimizing Losses In A Space Laser Power Beaming System, Charlie T. Bellows

Theses and Dissertations

A mathematical model is developed to track the amount of power delivered in a wireless laser power beaming system. In a wireless system the power proceeds through several different stages before being delivered to a payload for use. Each of these stages results in power losses that are thoroughly examined and modeled, allowing for the calculation of the likely amount of power delivered. Adjusting variable factors within the model allows for the optimization of the system for a specific task. The model shows that an optimized wireless power transfer system can deliver enough power to meet the space experiment objectives. …

Go to article

First Prev Next Last