Engineering Commons^™

Risk Assessment Model For Emergency Departments In Dublin Hospitals, Michael Thorwarth, Amr Arisha

Conference papers

The internal dynamics of emergency departments (ED) in Irish hospitals represent complex non-linear stochastic systems with an environment of uncertainty, variability and limited resources. Planning and managing such systems pose overwhelming demands. To improve operations, patient service, resource planning, and real-time reaction to unexpected events, sophisticated tools to efficiently achieve these goals must be applied.

Advanced solution techniques (e.g. simulation and optimisation) have been successfully applied in manufacturing operations to improve the delivery, cost-effectiveness and service quality. Yet, random arrival of patients, limited resources and multitasking are challenges in EDs that add more complexity to this critical area. This study …

Accelerometer Based Measurement For The Mapping Of Neck Surface Vibrations During Vocalized Speech, Mark Nolan, Brian Madden, Edward Burke

Conference Papers

This paper presents a detailed study of the vibrations on the surface of the neck during a vocalization of predefined fundamental frequency and intensity. This study was carried out as part of a wider investigation into the use of laryngeal vibrations as a channel of communication. Another potential application of this study is in identifying a suitable location for a hands-free electro-larynx for laryngectomees.

An analog accelerometer, with dimensions 5x5x1.6mm and of mass 80mg, was used to perform the measurements. It was connected to a 12-bit analog-to-digital converter via single strands of insulated wire with a diameter of 100μm. The …

A Modification To The Group Delay And Simulated Annealing Technique For Characterization Of Peripheral Nerve Fiber Size Distributions For Non-Deterministic Sampled Data, Robert B. Szlavik

Biomedical Engineering

The ability to determine the characteristics of peripheral nerve fiber size distributions would provide additional information to clinicians for the diagnosis of specific pathologies of the peripheral nervous system. Investigation of these conditions, using electro-diagnostic techniques, is advantageous in the sense that such techniques tend to be minimally invasive yet provide valuable diagnostic information. One of the principal electro-diagnostic tools available to the clinician is the nerve conduction velocity test. While the peripheral nerve conduction velocity test can provide useful information to the clinician regarding the viability of the nerve under study, it is a single parameter test that yields …

Optimisation Methods In Supply Chain Applications: A Review, Amr Arisha, Waleed Abo Hamad

Conference papers

The competitiveness and dynamic nature of today’s marketplace is due to rapid advances in information technology, short product life cycles and the continuing trend in global outsourcing. Managing the resulting supply chain networks effectively is a complex and challenging task which is imputable to high level of uncertainty in supply-demand, conflict objectives, vagueness of information, numerous decision variables and constraints. With such level of complexity in the environment, supply chain optimisation has a potential to make a significant contribution to resolve the challenges. In this paper, a literature review – based on more than one hundred peer-reviewed articles – of …

Variability Within Irrigated Fields, Charles M. Burt, Byron Clark

BioResource and Agricultural Engineering

In agricultural production and research, it is common to represent fields as uniform areas. For example, fertilizers, soil amendments, and other inputs have traditionally been applied uniformly (or as uniformly as possible) based on estimated needs for the field as a whole (or as an “average”).

Of course, it is also recognized that fields are not truly uniform with respect to soil characteristics, uniformity of applied water, pest pressures, fertility needs, crop growth and yield, and other characteristics. With the emergence and refinement of variable rate application technology, many growers now attempt to maximize returns by “prescribing” variable amounts of …

Composite Manufacturing Of Small Wind Turbine Blades- Utility Scale Methods Applied To Small Wind, Bryan Kyle Edwards

Master's Theses

Cal Poly, San Luis Obispo’s first wind turbine explores the methods and processes that are employed to manufacture utility scale wind turbines, and applies them to small scale wind turbines. The primary objective is to promote the development of small scale wind turbine blades in ways that resemble, as closely as possible, the construction and methods of utility scale turbine blade manufacturing. Vacuum infusion is employed to create a hollow, multi piece, lightweight design using carbon fiber and fiberglass with an epoxy based resin. A “rapid prototyping” method is developed using high density foam molds that allows short cycle time …

Acuta Enews September 2009, Vol. 38, No. 9

ACUTA Newsletters

In This Issue

From ACUTA Headquarters: Higher Ed Weighs in with IRS on Celt Phones ....Jeri Semer, CAE, Exec. Dir

What Will You Learn in Portland?

Tech Talk: Wake Up, Little Computer ................Kevin Tanzillo, Dux PR

DC Update ...........Dave Ostrom, Washington State University (retired)

lnfo Links ............. Randy Hayes, Univ. of Northern lowa

"Financial Crisis Activity in Washington" Newsletter for ACUTA Members

How People use Smartphones Harvard Business Publishing

Bring the Summit on UC or Annual Conference to Your Desktop

The analog Line ls Dead? Not Yet .Gory Audin, Delphi, lnc.

Welcome New Members

Check lt Out: Press Releases, Job …

Avoiding Veer-Off Accidents On Contaminated Runways, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Astronomical Tests Of Relativity: Beyond Parameterized Post-Newtonian Formalism (Ppn), To Testing Fundamental Principles, Vladik Kreinovich

Departmental Technical Reports (CS)

By the early 1970s, the improved accuracy of astrometric and time measurements enabled researchers not only to experimentally compare relativistic gravity with the Newtonian predictions, but also to compare different relativistic gravitational theories (e.g., the Brans-Dicke Scalar-Tensor Theory of Gravitation). For this comparison, Kip Thorne and others developed the Parameterized Post-Newtonian Formalism (PPN), and derived the dependence of different astronomically observable effects on the values of the corresponding parameters.

Since then, all the observations have confirmed General Relativity. In other words, the question of which relativistic gravitation theory is in the best accordance with the experiments has been largely settled. …

A Novel Approach For Analyzing Severe Crash Patterns On Multilane Highways, Anurag Pande, Mohamed Abdel-Aty

Civil and Environmental Engineering

This study presents a novel approach for analysis of patterns in severe crashes that occur on mid-block segments of multilane highways with partially limited access. A within stratum matched crash vs. non-crash classification approach is adopted towards that end. Under this approach crashes serve as units of analysis and it does not require aggregation of crash data over arterial segments of arbitrary lengths. Also, the proposed approach does not use information on non-severe crashes and hence is not affected by under-reporting of the minor crashes. Random samples of time, day of week, and location (i.e., milepost) combinations were collected for …

Cross-Well Radar Ii: Comparison And Experimental Validation Of Modeling Channel Transfer Function, Arvin Farid, Sophia H. Zhan, Akram N. Alshawabkeh, Carey M. Rappaport

Civil Engineering Faculty Publications and Presentations

Close agreement between theory and experiment is critical for adequate understanding and implementation of the Cross-Well Radar (CWR, otherwise known as Cross-Borehole Ground Penetrating Radar) technique, mentioned in a previous paper by the authors. Comparison of experimental results to simulation using a half-space dyadic Green’s function in the frequency domain requires development of transfer functions to transform the experimental data into a compatible form. A Channel Transfer Function (CTF) was developed to avoid having to model the transmitting and receiving characteristics of the antennas. The CTF considers electromagnetic (EM) wave propagation through the intervening media only (soil in this case), …

Post-Yield Relaxation Behavior Of Bovine Cancellous Bone, Travis A. Burgers, Roderic S. Lakes, Sylvana Garcia-Rodriguez, Geoffrey R. Piller, Heidi-Lynn Ploeg

Mechanical Engineering Faculty Publications

Relaxation studies were conducted on specimens of bovine cancellous bone at post-yield strains. Stress and strain were measured for 1000 s and the relaxation modulus was determined. Fifteen cylindrical, cancellous bone specimens were removed from one bovine femur in the anterior–posterior direction. The relaxation modulus was found to be a function of strain. Therefore cancellous bone is non-linearly viscoelastic/viscoplastic in the plastic region. A power law regression was fit to the relaxation modulus data. The multiplicative constant was found to be statistically related through a power law relationship to both strain (p < 0.0005) and apparent density (p < 0.0005) while the power coefficient was found to be related through a power law relationship, E(t, ε)= A(ε)t-n(ε), to strain (p < 0.0005), but not apparent density.

Weber River Basin Planning For The Future, Utah Division Of Water Resources

All In-stream Flows Material

The water resources of the Weber River Basin play an integral role in the life of every basin resident. From a morning shower to a weekend trip on Pineview Reservoir, water is interwoven into nearly every activity. Use of the basin’s water resources has allowed the land to be settled, has provided the basin’s citizens with numerous employment and recreational opportunities, and has made possible a high quality of life. The far-reaching vision of the basin’s leaders, coupled with modern engineering technology, has allowed the basin’s water supply to be harnessed and used on a large scale. Water has been …

A Study On The Effect Of Random Placement And Orientation On The Resonance Of Multiple Split Ring Resonators, Michael Buscher

Electrical Engineering Undergraduate Honors Theses

This thesis project experimentally studies the effect of placing split-ring oscillators (SRR) in a non-periodic arrangment with random orientation. This is contrary to typical structures which are simulated as a single unit cell with a periodic boundry condition to emulate an infinite array of SSR's. Samples are measured using a near-field free-space measurement system with full Thru, Reflect, Line (TRL) calibration and the application of time domain gating. Results, in the form of scattering (S) parameters, are compared with previous measurments of periodic SRR structures in order to study the influence, if any, of periodicity in the frequency response of …

Ceas E-News 09.01.2009, College Of Engineering And Applied Sciences

College of Engineering and Applied Sciences News

New CEAS dean returns to Michigan roots

Assessment Of Climatic Vulnerability In The Upper Thames River Basin, Leanna King, Tarana Solaiman, Slobodan P. Simonovic

Water Resources Research Report

This study provides an assessment of possible future climate conditions for the Upper Thames River Basin.

City Of London: Vulnerability Of Infrastructure To Climate Change. Background Report #2: Hydraulic Modeling And Floodplain Mapping, Dragan Sredojevic, Slobodan P. Simonovic

Water Resources Research Report

The main objective of the research project currently under way is to provide an engineering assessment of the vulnerability of London’s public infrastructure under projected rates of climate change with special emphasis on flooding. An original systematic procedure is used to gather and examine available data in order to develop an understanding of the relevant climatic effects and their interaction with municipal infrastructure. Assessment of climate change impacts on municipal infrastructure requires floodplain maps and inundation that will correspond to examined climate change scenarios. This report presents the results of hydraulic analyses used in floodplain mapping under changing climate.

Combined, …

Beyond Sustainability: The Contractor’S Role In Regenerative System Design, Rebecca Mirsky, Anthony Songer

Construction Management Faculty Publications and Presentations

Current business models employ the concept of the triple bottom line to integrate three aspects of sustainability into the organizational process: economic growth, environmental protection and social equity. This concept is evolving toward a regenerative design approach that promotes a triple "top" line, moving accountability to the beginning of the design process by assigning value to a variety of economic, environmental and social factors. There is an increasingly important need for proactive participation from the construction community in this new generation of sustainability efforts. Otherwise, there will be a widening gap between design and construction, in which the contractor role …

Cross-Well Radar I: Experimental Simulation Of Cross-Well Tomography And Validation, Arvin Farid, Akram N. Alshawabkeh, Carey M. Rappaport

Civil Engineering Faculty Publications and Presentations

This paper explains and evaluates the potential and limitations of conducting Cross-Well Radar (CWR) in sandy soils. Implementing the experiment and data collection in the absence of any scattering object, and in the presence of an acrylic plate (a representative of dielectric objects, such as DNAPL (dense non-aqueous phase liquid) pools, etc.), as a contrasting object in a water-saturated soil is also studied. To be able to image the signature of any object, more than one pair of receiving and transmitting antennas are required. The paper describes a method to achieve repeatable, reliable, and reproducible laboratory results for different transmitter-receiver …

Pesticide Fact Sheet: Mammalian Gonadotropin Releasing Hormone (Gnrh) [Gonacon]

United States Environmental Protection Agency: Publications

Available data provide adequate information to support the conditional registration of GnRH as a tool for management of nuisance white-tailed deer.

White-tailed deer have been classified by EPA as a public health pest because they are a host for blacklegged ticks (Ixodes scapularis), more commonly known as deer ticks, which are a carrier of Lyme disease.

In many urban and suburban areas white-tailed deer populations have become over abundant and are considered a year-round nuisance causing many human-wildlife conflicts such as destruction on gardens, landscapes and golf courses as well as a cause of numerous vehicle accidents. According …

Why Tensors?, Olga Kosheleva, Martine Ceberio, Vladik Kreinovich

Departmental Technical Reports (CS)

We show that in many application areas including soft constraints reasonable requirements of scale-invariance lead to polynomial (tensor-based) formulas for combining degrees (of certainty, of preference, etc.)

Continuous If-Then Statements Are Computable, Martine Ceberio, Vladik Kreinovich

Departmental Technical Reports (CS)

In many practical situations, we must compute the value of an if-then expression f(x) defined as "if c(x) >= 0 then f₊(x) else f_-(x)", where f₊(x), f_-(x), and c(x) are computable functions. The value f(x) cannot be computed directly, since in general, it is not possible to check whether a given real number c(x) is non-negative or non-positive. Similarly, it is not possible to compute the value f(x) if the if-then function is discontinuous, i.e., when f₊(x₀) =/= f_-(x₀) for some x₀ for …

Temporal Data Classification Using Linear Classifiers, Peter Revesz, Thomas Triplet

School of Computing: Conference and Workshop Papers

Data classification is usually based on measurements recorded at the same time. This paper considers temporal data classification where the input is a temporal database that describes measurements over a period of time in history while the predicted class is expected to occur in the future. We describe a new temporal classification method that improves the accuracy of standard classification methods. The benefits of the method are tested on weather forecasting using the meteorological database from the Texas Commission on Environmental Quality.

Feasibility Of Ellipsometric Sensor Development For Use During Pecvd Siox Coated Polymer Product Manufacturing, Daniel Lynn Helms

Master's Theses

Polymeric materials have provided pathways to products that could not be manufactured otherwise. A new technology which merges the benefits of ceramics into these polymer products has created materials ideally suited to many different industries, like food packaging. Nano Scale Surface Systems, Inc. (NS3), a company which coats polymers with ceramic oxides like SiO2 through a process known as plasma enhanced chemical vapor deposition (PECVD), was interested in the feasibility of an in line measurement system for monitoring the deposited films on various polymer products. This project examined two different coated polymer products, polyethylene terephthalate (PET) beverage containers and biaxially …

Optically Induced Electrokinetic Patterning And Manipulation Of Particles, Stuart J. Williams, Aloke Kumar, Steven Wereley

Birck and NCN Publications

The ability to easily and dynamically control fluid mo- tion as well as manipulate particles in suspension is impor- tant for the development and characterization of a variety of lab-on-a-chip processes. Recently, we have introduced an op- tically induced electrokinetic technique termed rapid electro- kinetic patterning (REP) that can rapidly concentrate, trans- late, and pattern colloids of many different sizes and compositions. We have tested polystyrene, latex, and silica beads in sizes ranging from 49 nm to 3.0 um.1,2

Graphene Formation Mechanisms On 4h-Sic(0001), Michael Bolen, Sara E. Harrison, Laura Biedermann, Michael A. Capano

Birck and NCN Publications

Graphene is created through thermal decomposition of the Si face of 4H-SiC in high-vacuum. Growth temperature and time are varied independently to gain a better understanding of how surface features and morphology affect graphene formation. Growth mechanisms of graphene are studied by ex situ atomic force microscopy (AFM) and scanning tunneling microscopy (STM). On the route toward a continuous graphene film, various growth features, such as macroscale step bunching, terrace pits, and fingers, are found and analyzed. Topographic and phase AFM analysis demonstrates how surface morphology changes with experimental conditions. Step-bunched terraces and terrace pits show a strong preference for …

Graphene Formation Mechanisms On 4h-Sic(0001), Michael Bolen, Sara E. Harrison, Laura B. Biedermann, Michael A. Capano

Birck and NCN Publications

Graphene is created through thermal decomposition of the Si face of 4H-SiC in high-vacuum. Growth temperature and time are varied independently to gain a better understanding of how surface features and morphology affect graphene formation. Growth mechanisms of graphene are studied by ex situ atomic force microscopy (AFM) and scanning tunneling microscopy (STM). On the route toward a continuous graphene film, various growth features, such as macroscale step bunching, terrace pits, and fingers, are found and analyzed. Topographic and phase AFM analysis demonstrates how surface morphology changes with experimental conditions. Step-bunched terraces and terrace pits show a strong preference for …

Phase Change Mechanisms During Femtosecond Laser Pulse Train Ablation Of Nickel Thin Films, Xin Li, Lan Jiang, Hai-Lung Tsai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The mechanisms of nickel thin films irradiated by femtosecond laser pulse trains are studied by a model using molecular dynamics simulations and two-temperature model. It is found that the pulse train technology can change energy transport and corresponding phase change processes. Compared with single pulse ablation at the same total fluence, the pulse trains lead to (1) lower ablation rate with more and smaller uniform nanoparticles, (2) higher film surface temperatures and longer thermalization time, (3) much lower electron thermal conductivity that can further control heat-affected zone, (4) significantly smaller film compressive stresses and tensile stresses which reduce microcracks, and …

Effects Of Spectral Radius And Settling Time In The Performance Of Echo State Networks, Ganesh K. Venayagamoorthy, Bashyal Shishir

Electrical and Computer Engineering Faculty Research & Creative Works

Echo State Networks (ESNs) have tremendous potential on a variety of problems if successfully designed. the effects of varying two important ESN parameters, the spectral radius (α) and settling time (ST) are studied in this letter. Spectral radius of an ESN is the maximum of all eigenvalues of the reservoir weights whereas ST is measured by the number of iterations allowed in the reservoir after its excitation by an input and before the sampling of the ESN output. the influence of these parameters on the performance of an ESN is illustrated using three different types of problems. These problems include …

Methanol Electro-Oxidation On Pt-Ru Alloy Nanoparticles Supported On Carbon Nanotubes, Ang Li, Yangchuan Xing

Chemical and Biochemical Engineering Faculty Research & Creative Works

Carbon nanotubes (CNTs) have been investigated in recent years as a catalyst support for proton exchange membrane fuel cells. Improved catalyst activities were observed and attributed to metal-support interactions. We report a study on the kinetics of methanol electro-oxidation on CNT supported Pt-Ru alloy nanoparticles. Alloy catalysts with different compositions, Pt 53Ru 47/CNT, Pt 69Ru 31/CNT and Pt 77Ru 23/CNT, were prepared and investigated in detail. Experiments were conducted at various temperatures, electrode potentials, and methanol concentrations. It was found that the reaction order of methanol electro-oxidation on the PtRu/CNT catalysts was consistent with what has been reported for PtRu …