Engineering Commons^™

Design And Fabrication Of Space Variant Micro Optical Elements, Pradeep Srinivasan

Electronic Theses and Dissertations

A wide range of applications currently utilize conventional optical elements to individually transform the phase, polarization, and spectral transmission/reflection of the incident radiation to realize the desired system level function. The material properties and the feasibility of fabrication primarily impact the device and system functionality that can be realized. With the advancement in micro/nano patterning, growth, deposition and etching technology, devices with novel and multiplexed optical functionalities have become feasible. As a result, it has become possible to engineer the device response in the near and far field by controlling the phase, polarization or spectral response at the micro scale. …

Femtosecond Laser Written Volumetric Diffractive Optical Elements And Their Applications, Jiyeon Choi

Electronic Theses and Dissertations

Since the first demonstration of femtosecond laser written waveguides in 1996, femtosecond laser direct writing (FLDW) has been providing a versatile means to fabricate embedded 3-D microstructures in transparent materials. The key mechanisms are nonlinear absorption processes that occur when a laser beam is tightly focused into a material and the intensity of the focused beam reaches the range creating enough free electrons to induce structural modification. One of the most useful features that can be exploited in fabricating photonic structures is the refractive index change which results from the localized energy deposition. The laser processing system for FLDW can …

Aglite Lidar: A Portable Elastic Lidar System For Investivating Aerosol And Wind Motions At Or Around Agricultural Production Facilities, Christian C. Marchant, Thomas Wilkerson, Gail E. Bingham, Vladimir V. Zavyalov, Jan M. Andersen, Cordell B. Wright, Scott S. Cornelsen, Randy S. Martin, Philip J. Silva, Jerry L. Hatfield

Civil and Environmental Engineering Faculty Publications

The Aglite Lidar is a portable scanning lidar that can be quickly deployed at agricultural and other air quality study sites. The purpose of Aglite is to map the concentration of PM10 and PM2.5 in aerosol plumes from agricultural and other sources. Aglite uses a high-repetition rate low-pulse energy 3-wavelength YAG laser with photon-counting detection together with a steerable pointing mirror to measure aerosol concentration with high spatial and temporal resolution. Aglite has been used in field campaigns in Iowa, Utah and California. The instrument is described, and performance and lidar sensitivity data are presented. The value of the lidar …

A Novel Capacitance Sensor For Fireside Corrosion Measurement, Heng Ban, Zuoping Li

Mechanical and Aerospace Engineering Faculty Publications

Fireside corrosion in coal-fired power plants is a leading mechanism for boiler tube failures. Online monitoring of fireside corrosion can provide timely data to plant operators for mitigation implementation. This paper presents a novel sensor concept for measuring metal loss based on electrical capacitance. Laboratory-scale experiments demonstrated the feasibility of design, fabrication, and operation of the sensor. The fabrication of the prototype sensor involved sputtering deposition of a thin metal coating with varying thickness on a ceramic substrate. Corrosion metal loss resulted in a proportional decrease in electrical capacitance of the sensor. Laboratory experiments using a muffle furnace with an …

Development Of Measurement And Modeling Techniques To Quantify Atmospheric Deposition Of Persistent, Bioaccumulative And Toxic Chemicals In The Great Lakes, Mark D. Rowe

Dissertations, Master's Theses and Master's Reports - Open

Measurement and modeling techniques were developed to improve over-water gaseous air-water exchange measurements for persistent bioaccumulative and toxic chemicals (PBTs). Analytical methods were applied to atmospheric measurements of hexachlorobenzene (HCB), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs). Additionally, the sampling and analytical methods are well suited to study semivolatile organic compounds (SOCs) in air with applications related to secondary organic aerosol formation, urban, and indoor air quality.

A novel gas-phase cleanup method is described for use with thermal desorption methods for analysis of atmospheric SOCs using multicapillary denuders. The cleanup selectively removed hydrogen-bonding chemicals from samples, including much of …

Long-Range Pollution Transport: Trans-Atlantic Mechanisms And Lagrangian Modeling Methods, Robert Christopher Owen

Dissertations, Master's Theses and Master's Reports - Open

Over the past several decades, it has become apparent that anthropogenic activities have resulted in the large-scale enhancement of the levels of many trace gases throughout the troposphere. More recently, attention has been given to the transport pathway taken by these emissions as they are dispersed throughout the atmosphere. The transport pathway determines the physical characteristics of emissions plumes and therefore plays an important role in the chemical transformations that can occur downwind of source regions. For example, the production of ozone (O₃) is strongly dependent upon the transport its precursors undergo. O₃ can initially be formed …

Estimation Of The Flammability Zone Boundaries With Thermodynamic And Empirical Equations, Travis Joseph Hansen

Dissertations, Master's Theses and Master's Reports - Open

The flammability zone boundaries are very important properties to prevent explosions in the process industries. Within the boundaries, a flame or explosion can occur so it is important to understand these boundaries to prevent fires and explosions. Very little work has been reported in the literature to model the flammability zone boundaries. Two boundaries are defined and studied: the upper flammability zone boundary and the lower flammability zone boundary. Three methods are presented to predict the upper and lower flammability zone boundaries:

The linear model

The extended linear model, and

An empirical model

The linear model is a thermodynamic model …

Pulse Polarization Radar For Determining Spatial And Material Information About A Target In Orbit, Nicholas D. Peterson

Dissertations, Master's Theses and Master's Reports - Open

No abstract provided.

Estimation Of The Degree Of Polarization Through Computational Sensing, Wei Wang

Dissertations, Master's Theses and Master's Reports - Open

The degree of polarization of a refected field from active laser illumination can be used for object identifcation and classifcation. The goal of this study is to investigate methods for estimating the degree of polarization for refected fields with active laser illumination, which involves the measurement and processing of two orthogonal field components (complex amplitudes), two orthogonal intensity components, and the total field intensity. We propose to replace interferometric optical apparatuses with a computational approach for estimating the degree of polarization from two orthogonal intensity data and total intensity data. Cramer-Rao bounds for each of the three sensing modalities with …

Identifying Indicators Of Sustainable Development Using The Global Sustainability Quadrant Approach , Andres B. Tarte

Dissertations, Master's Theses and Master's Reports - Open

Advances in information technology and global data availability have opened the door for assessments of sustainable development at a truly macro scale. It is now fairly easy to conduct a study of sustainability using the entire planet as the unit of analysis; this is precisely what this work set out to accomplish.

The study began by examining some of the best known composite indicator frameworks developed to measure sustainability at the country level today. Most of these were found to value human development factors and a clean local environment, but to gravely overlook consumption of (remote) resources in relation …

Vapor Generation In A Nanoparticle Liquid Suspension Using A Focused, Continuous Laser, R. A. Taylor, P. E. Phelan, Todd Otanicar, R. J. Adrian, P. S. Prasher

Mechanical Engineering Faculty Works

This letter discusses experimentation with optically induced phase change in nanoparticle liquid suspensions-commonly termed nanofluids. Four different types of nanofluids at five concentrations were exposed to a similar to 120 mW, 532 nm laser beam to determine the minimum laser flux needed to create vapor. Laser irradiance was varied between 0-770 W cm(-2). While the experiments were simple, they involved many complex, interrelated physical phenomena, including: subcooled boiling, thermal driven particle/bubble motion, nanoparticle radiative absorption/scattering, and nanoparticle clumping. Such phenomena could enable novel solar collectors in which the working fluid directly absorbs energy and undergoes phase change in a single …

Computational And Experimental Investigation Of The Flow Structure And Vortex Dynamics In The Wake Of A Formula 1 Tire, John Axerio, Gianluca Iaccarino, Emin Issakhanian, Chris Elkins, John Eaton

Mechanical Engineering Faculty Works

The flowfield around a 60% scale stationary Formula 1 tire in contact with the ground in a closed wind tunnel was examined experimentally in order to assess the accuracy of different turbulence modeling techniques. The results of steady RANS and Large Eddy Simulation (LES) were compared with PIV data, which was obtained within the same project. The far wake structure behind the wheel was dominated by two strong counter-rotating vortices. The locations of the vortex cores, extracted from the LES and PIV data as well as computed using different RANS models, showed that the LES predictions are closest to the …

Me-Em 2009 Annual Report, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering Annual Reports

Table of Contents

• Energy Systems
• Health Systems
• Faculty & Staff
• Students
• Alumni
• Resources
• Graduates
• Publications
• ME-EM Community

Mse News 2009, Department Of Materials Science And Engineering, Michigan Technological University

Department of Materials Science and Engineering Annual Reports

Table of Contents

• MSE Department Welcomes Engineering Fundamentals Chair
• MSE Department Welcomes New Professor
• Steel
• MSE Program Shines in US News Rankings
• MSE Alumnus Excelled in Mining Industry
• Student News
• Staff News
• Faculty News
• Alumni News

Shades Of Grey: A Critical Review Of Grey-Number Optimization, David E. Rosenberg

Civil and Environmental Engineering Faculty Publications

A grey number is an uncertain number with fixed lower and upper bounds but unknown distribution. Grey numbers find use in optimization to systematically and proactively incorporate uncertainties expressed as intervals plus communicate resulting stable, feasible ranges for the objective function and decision variables. This article critically reviews their use in linear and stochastic programs with recourse. It summarizes grey model formulation and solution algorithms. It advances multiple counter-examples that yield risk-prone grey solutions that perform worse than a worst-case analysis and do not span the stable feasible range of the decision space. The article suggests reasons for the poor …

Modeling Integrated Decisions For A Municipal Water System With Recourse And Uncertainties: Amman, Jordan, David E. Rosenberg, Jay Lund

Civil and Environmental Engineering Faculty Publications

Stochastic mixed-integer optimization is used to identify a portfolio of long- and short-term supply and conservation actions for a municipal water system to cost-effectively accommodate a distribution of water shortages. Alternative robust, grey-number, and best/worst case formulations systematically explore implications of uncertainties in action costs, life spans, water volumes gained or saved, shortage levels, and shortage probabilities. A detailed example for Amman, Jordan considers 23 potential actions. Results show: (1) remarkable consistency occurs across the different modeling approaches. (2) Conserving water—reducing leakage and targeting select customers to install water efficient appliances—plays an important and growing role over time. (3) A …

Improving Wetland Characterization With Multi-Sensor, Multi-Temporal Sar And Optical/Infrared Data Fusion, Laura Bourgeau-Chavez, K. Riordan, Richard Powell, Nicole Miller, Mitch Nowels

Michigan Tech Research Institute Publications

No abstract provided.

Free Regions Of Sensor Nodes, Laxmi P. Gewali, Navin Rongatana, Henry Selvaraj, Jan B. Pedersen

Electrical & Computer Engineering Faculty Research

We introduce the notion of free region of a node in a sensor network. Intuitively, a free region of a node is the connected set of points R in its neighborhood such that the connectivity of the network remains the same when the node is moved to any point in R. We characterize several properties of free regions and develop an efficient algorithm for computing them. We capture free region in terms of related notions called in-free region and out-free region. We present an O(n2) algorithm for constructing the free region of a node, where n is the number of …

An Algorithm For Identifying Novel Targets Of Transcription Factor Families: Application To Hypoxia-Inducible Factor 1 Targets, Yue Jiang, Bojan Cukic, Donald A. Adjeroh, Heath D. Skinner, Jie Lin, Qingxi J. Shen, Bing-Hua Jiang

Electrical & Computer Engineering Faculty Research

Efficient and effective analysis of the growing genomic databases requires the development of adequate computational tools. We introduce a fast method based on the suffix tree data structure for predicting novel targets of hypoxia-inducible factor 1 (HIF-1) from huge genome databases. The suffix tree data structure has two powerful applications here: one is to extract unknown patterns from multiple strings/sequences in linear time; the other is to search multiple strings/sequences using multiple patterns in linear time. Using 15 known HIF-1 target gene sequences as a training set, we extracted 105 common patterns that all occur in the 15 training genes …

Model For Alumina Nanopore-Based Optical Filter, Nathan Lehman, Rama Venkat, Robert A. Schill

Electrical & Computer Engineering Faculty Research

Alumina nanopore structures find applications in magnetic sensors, optical filters, and various biological devices. In this work, we present a ray-optics model for the optical filter. We present a detailed simulation and a simplified analytical expression for the reflectance as a function of the alumina parameters such as pore diameter, pore density, alumina thickness, and a function of the wavelength and angle of incidence of the illuminating plane electromagnetic wave. The reflectance vs wavelength in the range of 400–800nm obtained from the simulation and the analytical expression are compared with that of the experiments for thin and thick alumina. All …

Explicit Finite Element Modeling Of Knee Mechanics During Simulated Dynamic Activities, Mark A. Baldwin

Electronic Theses and Dissertations

The natural knee is one of the most commonly injured joints in the body due to relatively high loads and motions that can lead to debilitating degenerative diseases such as osteoarthritis. Total knee arthroplasty is a clinically successful method for eliminating pain in the osteoarthritic knee, but is subject to complications that can affect patient satisfaction and long-term implant performance. The work presented in this dissertation is a demonstration of how anatomic three-dimensional (3D) computational knee models can be an effective alternative for investigating knee mechanics when compared to the cost and time prohibitive nature of in-vivo and in-vitro methods. …

Formation Feedback Control Of Uav Flight, Stephen Stegall

Doctoral Dissertations and Master's Theses

This thesis is a study of formation control with autonomous unmanned aerial vehicles using the formation as feedback. There is also an investigation of formation methods presenting insight into different algorithms for formations. A rigid formation is achieved using a proportional-derivative virtual structure with a formation feedback controller. There is an emphasis on stick controlled aerodynamics. The rigid formation is verified by a simulation of a longitudinal model. Formation control ideas are presented for rigid formations.

Bluetooth Hacking: A Case Study, Dennis Browning, Gary C. Kessler

Security Studies & International Affairs - Daytona Beach

"This paper describes a student project examining mechanisms with which to attack Bluetooth-enabled devices. The paper briefly describes the protocol architecture of Bluetooth and the Java interface that programmers can use to connect to Bluetooth communication services. Several types of attacks are described, along with a detailed example of two attack tools, Bloover II and BT Info."--from the article

A Gasoline Demand Model For The United States Light Vehicle Fleet, Diana Rey

Electronic Theses and Dissertations

The United States is the world's largest oil consumer demanding about twenty five percent of the total world oil production. Whenever there are difficulties to supply the increasing quantities of oil demanded by the market, the price of oil escalates leading to what is known as oil price spikes or oil price shocks. The last oil price shock which was the longest sustained oil price run up in history, began its course in year 2004, and ended in 2008. This last oil price shock initiated recognizable changes in transportation dynamics: transit operators realized that commuters switched to transit as a …

Meso-Scale Heating Predictions For Weak Impact Of Granular Energetic Solids, Rohan Panchadhara

LSU Doctoral Dissertations

An explicit, two-dimensional, Lagrangian finite and discrete element technique is formulated and used to computationally characterize meso-scale fluctuations in thermomechanical fields induced by low pressure deformation waves propagating through particulate energetic solids. Emphasis is placed on characterizing the relative importance of plastic and friction work as meso-scale heating mechanisms which may cause bulk ignition of these materials and their dependence on piston speed (vp ~ 50-500 m/s). The numerical technique combines conservation principles with a plane strain, thermoelastic-viscoplastic constitutive theory to describe deformation within the material meso-structure. An energy consistent, penalty based, distributed potential force method, coupled to a penalty …

Development And Operational Analysis Of Highway Alternating Merge Transition Zones, Wakeel Ishola, Anthony Idewu

LSU Doctoral Dissertations

The design and control of work zone traffic control areas is governed by standards published by the United States Department of Transportation (US-DOT) and documented in the Manual for Uniform Control Devices (MUTCD). While these configurations have evolved over time to reflect safer and more efficient management practices and have become familiar to drivers, they are also recognized as areas of vehicle conflict that can cause congestion and safety problems. As part of this research, a new design has been developed that has the potential to lessen the detrimental effects of lane closures in work zones. This new concept, known …

Meta-Learning Computational Intelligence Architectures, Ryan J. Meuth

Doctoral Dissertations

"In computational intelligence, the term 'memetic algorithm' has come to be associated with the algorithmic pairing of a global search method with a local search method. In a sociological context, a 'meme' has been loosely defined as a unit of cultural information, the social analog of genes for individuals. Both of these definitions are inadequate, as 'memetic algorithm' is too specific, and ultimately a misnomer, as much as a 'meme' is defined too generally to be of scientific use. In this dissertation the notion of memes and meta-learning is extended from a computational viewpoint and the purpose, definitions, design guidelines …

Novel Optofluidic Sensor Systems For Quantitative Chemical Imaging And On-Chip Sensor Calibration, Jongwon Park

Doctoral Dissertations

"The design, fabrication and characterization of optofluidic biosensor systems for quantitative oxygen imaging with a color charge-coupled device (CCD) camera as well as on-chip self-calibration of sensors utilizing gas bubbles was investigated. This dissertation was prepared in publication format. The first and second papers demonstrate that color imaging devices can be used in quantitative chemical analysis. The final paper explores the feasibility of using electrolytically generated bubbles for a novel functionality of reagentless, on-chip, in situ calibration of optical biosensors. Work in the first paper includes the use of a color CCD camera for fluorescence intensity imaging. This involves extracting …

Real-Time And Portable Microwave Imaging System, Mohammad Tayeb Ahmad Ghasr

Doctoral Dissertations

"Microwave and millimeter wave imaging has shown tremendous utility in a wide variety of applications. These techniques are primarily based on measuring coherent electric field distribution on the target being imaged. Mechanically scanned systems are the simple and low cost solution in microwave imaging. However, these systems are typically bulky and slow. This dissertation presents a design for a 2D switched imaging array that utilizes modulated scattering techniques for spatial multiplexing of the signal. The system was designed to be compact, coherent, possessing high dynamic range, and capable of video frame rate imaging. Various aspects of the system design were …

Spacecraft Formation Flight At Sun-Earth/Moon Libration Points, Douglas Robert Tolbert

Doctoral Dissertations

"Formations of spacecraft, positioned near the libration points of the Sun- Earth/Moon system, have recently received an increase in interest in response to a variety of mission needs. Specifically, missions such as the Micro Arcsecond X-Ray Imaging Mission (MAXIM), Terrestrial Pathfinder (TPF), Stellar Imager (SI) and the European Space Agency's DARWIN all baseline formations of spacecraft to satisfy mission requirements. Replacing the traditional single spacecraft mission with multiple small spacecraft flying in formation is advantageous for these missions, especially when establishing a virtual aperture. These types of formations allow for higher resolution observations than with a single, conventional aperture. The …