Engineering Commons^™

Study Of Corrosion Of Materials In The Sulfur-Iodine Hydrogen Production Cycle, Thao Trung Ho

UNLV Theses, Dissertations, Professional Papers, and Capstones

Hydrogen is of great interest since the availability of traditional fossil fuels is in decline. Strictly speaking, hydrogen is not a primary source of energy but is an energy carrier, since energy typically must be used from another source (electricity, natural gas, coal, etc.) to produce it. Of hydrogen production techniques, the Sulfur-Iodine thermochemical water splitting process (S-I cycle), which was proposed by General Atomics (GA), is promising with its simplicity and high efficiency. Most of the chemicals are recycled except water. However, the S-I cycle operates in a harsh, corrosive environment in the presence of a mixture of iodine …

Mitigation Of Impact Vibrations Using Impedance Mismatch In Cylindrical Structures, Sachiko Sueki

UNLV Theses, Dissertations, Professional Papers, and Capstones

The focus of this work is to study the phenomenon of material impedance mismatch to determine its effect on the mitigation of high frequency accelerations in projectile and long bar structures within linear ranges of materials. In this study, the acceleration responses of structures with various materials and material combinations were studied experimentally, numerically and by the Finite Element Analysis (FEA). Air-gun tests conducted by the US Army Research Laboratory were modeled using FEA to simulate the acceleration pulse and shock waves experienced by artillery components during a launch. After the prototype of projectile was selected, further studies were conducted …

Analysis Of A Caliche Stiffened Pile Foundation, Richard C. Stone Jr.

UNLV Theses, Dissertations, Professional Papers, and Capstones

Cemented carbonate deposits (known locally as "caliche") in Las Vegas have been used to support shallow and deep foundations with relatively high bearing pressures compared to soil. Most high rise structures in Las Vegas are founded on either a large mat or a long pile foundation. Recently, a new foundation type consisting of a short pile system bonded to shallow cemented layers was utilized for a large high rise building in Las Vegas and settlements during construction were recorded. The bonding of caliche layers together with short piles forms a caliche stiffened pile (CSP) foundation. The CSP foundation is unique …

On-Board Three-Dimensional Object Tracking: Software And Hardware Solutions, Ajay Kumar Mandava

UNLV Theses, Dissertations, Professional Papers, and Capstones

We describe a real time system for recognition and tracking 3D objects such as UAVs, airplanes, fighters with the optical sensor. Given a 2D image, the system has to perform background subtraction, recognize relative rotation, scale and translation of the object to sustain a prescribed topology of the fleet. In the thesis a comparative study of different algorithms and performance evaluation is carried out based on time and accuracy constraints. For background subtraction task we evaluate frame differencing, approximate median filter, mixture of Gaussians and propose classification based on neural network methods. For object detection we analyze the performance of …

Empirically Derived Formulas To Predict Indoor Maximum, Average, And Minimum Temperatures In Roofpond Buildings Using Minimum Climatic Information, Ibrahim Kivarkis Kako

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis introduces an empirically developed formula to predict the comfort conditions and thermal performance of a Skytherm(TM) Southwest Roofpond placed over a light-weight un-insulated structure built at the School of Architecture at the University of Nevada, Las Vegas.

The predictive formula introduced in this study may be used in different parts of the world (particularly developing nations where insulation and air-conditioning are rarely used) to predict the performance of a Skytherm(TM) Southwest Roofpond using minimal climate data.

The data collected in the experimental setup at the Natural Energies Advanced Technologies Laboratory included outside and inside temperatures of various surfaces …

Design And Characterization Of A Shock And Vibration Mitigation Seat System, George Samaan Ladkany

UNLV Theses, Dissertations, Professional Papers, and Capstones

Extensive research has been conducted into the development of pneumatic seatbladder systems for shock and vibration mitigation for use in current U.S military vehicle envelopes. This research expands on the previous work through an elaborate experimental characterization of four prototype air bladder seat cushion systems. The experimental characterization conducted included shock testing, continuous vibration, and internal dynamic pressure measured during the shock event.

The shock testing was conducted both at the Army Research Lab as well at UNLV. The shock testing conducted at UNLV was performed on a drop tower designed and constructed during the time of this research. The …

Preliminary Investigation Of Metallurgical Structure And Mechanical Properties Of Cast Iron With High Aluminum Content, Pavel Bizyukov

Dissertations and Theses @ UNI

The problem addressed in this study analyzed various properties of cast iron with high aluminum content. This grade of cast iron was projected for use in the automotive industry. The benefits provided with high aluminum content are lower specific gravity and relatively inexpensive source materials with the potential of achieving high temperature properties.

The purpose of the study was to select suitable source materials and determine an effective melting technique, to investigate metallurgical structure and mechanical properties at given chemical composition, and, finally, to provide elaborate results.

The design of the experiment included the following steps: (a) selection and preparation …

Novel Techniques In Iris Recognition, David Walker

UNLV Theses, Dissertations, Professional Papers, and Capstones

Using Daugman's algorithm and comparable alternatives, we find that we are able to identify an iris with as little as less than half of the iris information available, and an equal error rate comparable with that of popular biometrics like the fingerprint and face recognition biometrics. Different experiments were done based on percentage of iris shown, the resolution of the iris, and the position of the iris covered to determine if partial iris recognition is a viable biometric. It was found after over 500,000 different iris comparisons amongst five different experiments that regardless of the model used and the resolution, …

Metal Induced Crystallization Of Silicon Thin Films, Sandeep Kumar Raju Sangaraju

UNLV Theses, Dissertations, Professional Papers, and Capstones

Low temperature crystallization of thin film silicon is important for many industrial applications including flat panel displays and silicon thin film solar cells. Unfortunately this remains a major challenge since crystallization temperature of silicon is above 1,000 degrees Celsius, thus limiting to substrates that can tolerate high temperatures. The inability to deposit crystalline thin films on glass substrates is the reason why flat panel display industry uses amorphous silicon for LCD active matrix displays. Thus the ability to deposit crystallized thin film silicon at low temperatures will have significant impact on thin film silicon applications. It has been observed that …

Substituent Effect On The Electronic And Assembling Properties Of Asymmetric Phenazine Derivatives, Bin Cao

UNLV Theses, Dissertations, Professional Papers, and Capstones

Currently, one-dimensional (1-D) nanostructures have drawn much interest because of their potential applications for nanoscale optoelectronic devices. Self-assembly (SA) based on π-conjugated systems through various intermolecular interactions has been widely used to produce 1-D nanostructure. Morphology of the assembled structures can be modified by incorporating substituents, which provide additional secondary interactions. Meanwhile, those substituents also influence the electronic properties of the molecules. Previous studies have made little effort to systematically study subsistent effects on both electronic and SA properties.

The primary objective of this research is to generate controllable 1-D structures through SA, and to provide a fundamental understanding of …

Zirconia-Magnesia Inert Matrix Fuel And Waste Form: Synthesis, Characterization And Chemical Performance In An Advanced Fuel Cycle, Kiel Steven Holliday

UNLV Theses, Dissertations, Professional Papers, and Capstones

There is a significant buildup in plutonium stockpiles throughout the world, because of spent nuclear fuel and the dismantling of weapons. The radiotoxicity of this material and proliferation risk has led to a desire for destroying excess plutonium. To do this effectively, it must be fissioned in a reactor as part of a uranium free fuel to eliminate the generation of more plutonium. This requires an inert matrix to volumetrically dilute the fissile plutonium. Zirconia-magnesia dual phase ceramic has been demonstrated to be a favorable material for this task. It is neutron transparent, zirconia is chemically robust, magnesia has good …

Two-Tank Indirect Thermal Storage Designs For Solar Parabolic Trough Power Plants, Joseph E. Kopp

UNLV Theses, Dissertations, Professional Papers, and Capstones

The performance of a solar thermal parabolic trough plant with thermal storage is dependent upon the arrangement of the heat exchangers that ultimately transfer energy from the sun into steam. The steam is utilized in a traditional Rankine cycle power plant. The most commercially accepted thermal storage design is an indirect two-tank molten salt storage system where molten salt interacts with the solar field heat transfer fluid (HTF) through a heat exchanger. The molten salt remains in a closed loop with the HTF and the HTF is the heat source for steam generation. An alternate indirect two tank molten salt …

A Comparison Of Instructional Delivery Methods Based On Student Evaluation Data, John Hackworth, Carol Considine, Vernon Lewis

Engineering Technology Faculty Publications

Distance Education is an increasingly common educational delivery method. At Old Dominion University, all junior and senior level engineering technology courses are offered via distance education at least once every two years. A majority of courses in the distance education system at this university have three simultaneous delivery methods: on-campus, televised (receiving the course at an off-campus site via satellite video/audio), and internet-based video-streamed.

This paper explores the results of student course evaluation surveys for trends, in particular those trends which can be a result of the mode of delivery. Results of these surveys for 23 courses over a 4-year …

Analysis Of Possible Use Of Identification Technologies In Disassembly, Vukica Jovanović, Sreten Filipović, Gordana Ostojić, Stevan Stankovski, Milovan Lazarević

Engineering Technology Faculty Publications

The barcodes and Radio Frequency Identification tags that are being used during manufacturing, assembly, warehousing, and distribution could also be reused at the end of the product lifecycle for an identification of the correct disassembly process that would result in recycling of its components. The barcodes or RFID tags can be helpful in identifying objects in terms of sustainable development, regarding disassembly, recycling and reuse. In this paper, the analysis of the current applications of RFID Technology in the final phase of the product lifecycle will be presented. The simulation of the disassembly process supported by both barcode and RFID-enabled …

Computational Techniques For Reducing Spectra Of The Giant Planets In Our Solar System, Holly L. Grimes

Dissertations and Theses

The dynamic atmospheres of Jupiter, Saturn, Uranus, and Neptune provide a rich source of meteorological phenomena for scientists to study. To investigate these planets, scientists obtain spectral images of these bodies using various instruments including the Cooled Mid-Infrared Camera and Spectrometer (COMICS) at the Subaru Telescope Facility at Mauna Kea, Hawaii. These spectral images are two-dimensional arrays of double precision floating point values that have been read from a detector array. Such images must be reduced before the information they contain can be analyzed. The reduction process for spectral images from COMICS involves several steps:

1. Sky subtraction: the …

Dynamic Task Prediction For An Spmt Architecture Based On Control Independence, Komal Jothi

Dissertations and Theses

Exploiting better performance from computer programs translates to finding more instructions to execute in parallel. Since most general purpose programs are written in an imperatively sequential manner, closely lying instructions are always data dependent, making the designer look far ahead into the program for parallelism. This necessitates wider superscalar processors with larger instruction windows. But superscalars suffer from three key limitations, their inability to scale, sequential fetch bottleneck and high branch misprediction penalty. Recent studies indicate that current superscalars have reached the end of the road and designers will have to look for newer ideas to build computer processors.

Speculative …

Emergency Evacuation Route Planning Considering Human Behavior During Short- And No-Notice Emergency Situations, Suebpong Kittirattanapaiboon

Electronic Theses and Dissertations

Throughout United States and world history, disasters have caused not only significant loss of life, property but also enormous financial loss. The tsunami that occurred on December 26, 2004 is a telling example of the devastation that can occur unexpectedly. This unexpected natural event never happened before in this area. In addition, there was a lack of an emergency response plan for events of that magnitude. Therefore, this event resulted not only in a natural catastrophe for the people of South and Southeast Asia, but it is also considered one of the greatest natural disasters in world history. After the …

Physical Properties Of Wave Scattering By Chiral Periodic Structure, Xiaomin Yang

Electronic Theses and Dissertations

Attention has been focused on electromagnetic chirality and its potential applications to microwave, millimeter wave and optical wave devices. In this work, wave propagation through a chiral periodic structure with arbitrary shape is investigated. Although perturbation theory and coupled-mode theory have been used to analyze chiral periodic structure, those are approximate methods and can only be used for low frequency applications. In this work, the rigorous mode-matching method is used to solve the problem. Staircase approximation is introduced to change the curved structure to a multilayer structure. The field solutions in the uniform air regions and unbounded air-chiral periodic array …

Design Of Sea Water Heat Exchanger For Miniature Vapor Compression Cycle, James Hughes

Electronic Theses and Dissertations

Recent advances in the development of miniature vapor compression cycle components have created unique opportunities for heating and cooling applications, specifically to human physiological requirements that arise in extreme environments. Diving in very cold water between 1.7 and 5°C requires active heating because passive thermal insulation has proven inadequate for long durations. To maintain diver mobility and cognitive performance, it is desirable to provide 250 to 300 W of heat from an untethered power source. The use of a miniature vapor compression cycle reduces the amount of power (batteries or fuel cell) that the diver must carry by 2.5 times …

Silicon Carbide And Agile Optics Based Sensors For Power Plant Gas Turbines, Laser Beam Analysis And Biomedicine, Mumtaz Sheikh

Electronic Theses and Dissertations

Proposed are novel sensors for extreme environment power plants, laser beam analysis and biomedicine. A hybrid wireless-wired extreme environment temperature sensor using a thick single-crystal Silicon Carbide (SiC) chip embedded inside a sintered SiC probe design is investigated and experimentally demonstrated. The sensor probe employs the SiC chip as a Fabry-Perot (FP) interferometer to measure the change in refractive index and thickness of SiC with temperature. A novel temperature sensing method that combines wavelength-tuned signal processing for coarse measurements and classical FP etalon peak shift for fine measurements is proposed and demonstrated. This method gives direct unambiguous temperature measurements with …

Analytical Strip Method To Antisymmetric Laminated Plates, Liecheng Sun

University of Kentucky Doctoral Dissertations

An Analytical Strip Method (ASM) for the analysis of stiffened and non-stiffened antisymmetric laminated composite plates is derived by considering the bending-extension coupling effect for bending, free vibration and buckling. A system of three equations of equilibrium, governing the general response of arbitrarily laminated composite plates, is reduced to a single eighth order partial differential equation in terms of a displacement function. The displacement function is solved in a single series form to determine the displacement, fundamental frequency, and buckling load of antisymmetric cross-ply and angle-ply laminated composite plates. The solution is applicable to rectangular plates with two opposite edges …

A Protocol Suite For Wireless Personal Area Networks, Karl E. Persson

University of Kentucky Doctoral Dissertations

A Wireless Personal Area Network (WPAN) is an ad hoc network that consists of devices that surround an individual or an object. Bluetooth^® technology is especially suitable for formation of WPANs due to the pervasiveness of devices with Bluetooth^® chipsets, its operation in the unlicensed Industrial, Scientific, Medical (ISM) frequency band, and its interference resilience. Bluetooth^® technology has great potential to become the de facto standard for communication between heterogeneous devices in WPANs.

The piconet, which is the basic Bluetooth^® networking unit, utilizes a Master/Slave (MS) configuration that permits only a single master and up to …

Micro-Fabricated Hydrogen Sensors Operating At Elevated Temperatures, Chi Lu

University of Kentucky Doctoral Dissertations

In this dissertation, three types of microfabricated solid-state sensors had been designed and developed on silicon wafers, aiming to detect hydrogen gas at elevated temperatures. Based on the material properties and sensing mechanisms, they were operated at 140°C, 500°C, and 300°C. The MOS-capacitor device working at 140°C utilized nickel instead of the widely-used expensive palladium, and the performance remained excellent. For very-high temperature sensing (500°C), the conductivity of the thermally oxidized TiO₂ thin film based on the anodic aluminum oxide (AAO) substrate changed 25 times in response to 5 ppm H₂ and the response transient times were just …

Droplet Flows In Microchannels Using Lattice Boltzmann Method, Amit Gupta

Electronic Theses and Dissertations

Microelectromechanical systems (MEMS) have widespread applications in medical, electronical and mechanical devices. These devices are characterized by the smallest dimension which is at least one micrometer and utmost one millimeter. Rapid progress in the manufacture and utilization of these microdevices has been achieved in the last decade. Current manufacturing techniques of such devices and channels include surface silicon micromachining; bulk silicon micromachining; lithography; electrodeposition and plastic molding; and electrodischarge machining (EDM). In recent years, electrostatic, magnetic, electromagnetic and thermal actuators, valves, gears and diaphragms of dimensions of hundred microns or less have been fabricated successfully. Sensors have been manufactured that …

Study Of The Effects Of Sodium And Absorber Microstructure For The Development Of Cuin1-Xgaxse2-Ysy Thin Film Solar Cell Using An Alternative Selenium Precursor, Vinaykumar Hadagali

Electronic Theses and Dissertations

Thin film solar cells have the potential to be an important contributor to the world energy demand in the 21st century. CuInGaSe2 thin film solar cells have achieved the highest efficiency among all the thin film technologies. A steady progress has been made in the research and development of CuInSe2 based thin film solar cells. However, there are many issues that need to be addressed for the development of CuInSe2 based thin films solar cells. High price of PV modules has been a biggest factor impeding the growth of photovoltaic modules for terrestrial application. This thesis tries to address the …

Physical Ergonomic And Mental Workload Factors Of Mobile Learning Affecting Performance Of Adult Distance Learners: Student Pers, Rochelle Jones

Electronic Theses and Dissertations

Distance education is the fastest growing educational modality because of advances information technology has made over the past 25 years. Adult learners have become the fastest growing population in distance education. Adult learners, through technical tools and devices they use on the job, have become more digitally literate and mobile, making the ability to access class work on the go a necessity. Mobile learning or m-learning (learning that uses wireless, portable, mobile computing, and communication devices) is becoming an extension of distance learning, providing a channel for students to learn, communicate, and access educational material outside the traditional classroom environment. …

A Direct Compensator Profile Optimization Approach For Intensity Modulated Radiation Treatment Planning, Kevin Erhart

Electronic Theses and Dissertations

Radiation therapy accounts for treatment of over one million cancer patients each year in the United States alone, and its use will continue to grow rapidly in the coming years. Recently, many important advancements have been developed that greatly improve the outcomes and effectiveness of this treatment technique, the most notable being Intensity Modulated Radiation Therapy (IMRT). IMRT is a sophisticated treatment technique where the radiation dose is conformed to the tumor volume, thereby sparing nearby healthy tissue from excessive radiation dose. While IMRT is a valuable tool in the planning of radiation treatments, it is not without its difficulties. …

Efficient Techniques For Relevance Feedback Processing In Content-Based Image Retrieval, Danzhou Liu

Electronic Theses and Dissertations

In content-based image retrieval (CBIR) systems, there are two general types of search: target search and category search. Unlike queries in traditional database systems, users in most cases cannot specify an ideal query to retrieve the desired results for either target search or category search in multimedia database systems, and have to rely on iterative feedback to refine their query. Efficient evaluation of such iterative queries can be a challenge, especially when the multimedia database contains a large number of entries, and the search needs many iterations, and when the underlying distance measure is computationally expensive. The overall processing costs, …

Learning Semantic Features For Visual Recognition, Jingen Liu

Electronic Theses and Dissertations

Visual recognition (e.g., object, scene and action recognition) is an active area of research in computer vision due to its increasing number of real-world applications such as video (image) indexing and search, intelligent surveillance, human-machine interaction, robot navigation, etc. Effective modeling of the objects, scenes and actions is critical for visual recognition. Recently, bag of visual words (BoVW) representation, in which the image patches or video cuboids are quantized into visual words (i.e., mid-level features) based on their appearance similarity using clustering, has been widely and successfully explored. The advantages of this representation are: no explicit detection of objects or …

Water Vapor And Carbon Dioxide Species Measurement In Narrow Channels, Derek Lambe

Electronic Theses and Dissertations

A novel method has been implemented for measuring the concentration of gas species, water vapor and carbon dioxide, within a narrow channel flow field non-invasively using tunable diode laser absorption spectroscopy (TDLAS) in conjunction with a laser modulated at a high frequency [Wavelength Modulation Spectroscopy (WMS)] tuned to the ro-vibrational transition of the species. This technique measures the absorption profile which is a strong function of the species concentration across short path lengths and small time spans, as in PEM fuel cells during high load cycles. This method has been verified in a transparent circular flow 12 cm path length …