Engineering Commons^™

Wireless Pedometer, Jeffrey Lease

Electrical Engineering

No abstract provided.

Energy Harvesting From Elliptical Machines: Dc Converter Troubleshooting, Michelle Lum, Jonathan Yuen

Electrical Engineering

In continuing the global effort to integrate innovative technology and renewable energy in the world’s power system, Cal Poly endeavors to harvest energy from elliptical machines and feed that power back into the electrical grid. This continuation of the previous project, Energy Harvesting from Exercise Machines Self‐generating Elliptical Machines, seeks an alternative DC to DC converter to function within the existing elliptical self‐generating system. By attempting to implement this new DC to DC converter, the project strives to reduce the size of the converter in order to mount it on the elliptical machine. The project also tries to explain how …

Violin Note Detector Using Digital Signal Processing, Nathaniel Kyle Mopas

Electrical Engineering

No abstract provided.

Computational Fluid Dynamics Modeling Of Atmospheric Flow Applied To Wind Energy Research, Alan Russell

Boise State University Theses and Dissertations

High resolution atmospheric flow modeling using computational fluid dynamics (CFD) has many applications in the wind energy industry. A well designed model can accurately calculate wind speed, direction, and turbulence at any point in a wind farm using data from a fixed location source. The model can extend point source data over an area of several square kilometers, or map terrain influenced microclimates using remote wind data. A local flow model is critical for wind resource site assessment, and for optimizing wind farm turbine layout for maximum power production. A CFD simulation of an operating wind farm, coupled with a …

Wide I/O Dram Architecture Utilizing Proximity Communication, Qawi Ibnzayd Harvard

Boise State University Theses and Dissertations

The bandwidth and power consumption of dynamic random access memory, used as the main memory of a computer system, impacts the computer’s execution rate even with the existence of a memory hierarchy. DRAM manufacturers focus on density increases due to the innate price per bit decline of main memory while processor manufacturers continually focus on boosting performance by increasing the number of instructions completed per second. This leads to a performance gap between the microprocessor and DRAM.

Proximity communication promises to increase the I/O density of DRAM products while reducing the power consumption of the main memory system. This thesis …

Effects Of Aggregate Angularity On Mix Design Characteristics And Pavement Performance, Leonardo T. Souza, Yong-Rak Kim

Nebraska Department of Transportation: Research Reports

No abstract provided.

Effects Of Aggregate Angularity On Mix Design Characteristics And Pavement Performance, Yong-Rak Kim, Leonardo T. Souza

Nebraska Department of Transportation: Research Reports

This research targeted two primary purposes: to estimate current aggregate angularity test methods and to evaluate current aggregate angularity requirements in the Nebraska asphalt mixture/pavement specification. To meet the first research objective, various aggregate angularity tests were estimated with the same sets of aggregates and were compared by investigating their characteristics on testing repeatability, cost, testing time, workability, and sensitivity of test results. For the second objective, the effect of aggregate angularity on mixture performance was investigated by conducting laboratory performance tests (the uniaxial static creep test and the indirect tensile fracture energy test) of five mixes designed with different …

The Rheology, Degradation, Processing, And Characterization Of Renewable Resource Polymers, Jason Conrad

All Dissertations

Renewable resource polymers have become an increasingly popular alternative to conventional fossil fuel based polymers over the past couple decades. The push by the government as well as both industrial and consumer markets to go 'green' has provided the drive for companies to research and develop new materials that are more environmentally friendly and which are derived from renewable materials. Two polymers that are currently being produced commercially are poly-lactic acid (PLA) and polyhydroxyalkanoate (PHA) copolymers, both of which can be derived from renewable feedstocks and have shown to exhibit similar properties to conventional materials such as polypropylene, polyethylene, polystyrene, …

Exergetic And Thermoeconomic Analyses Of The Rice-Husk Power Plant In Thailand, P Peerapong, B Limmeechokchai

Journal of Metals, Materials and Minerals

The purpose of this study is to analyze a rice husk power plant, and consider the efficiency of the power plant through both the first law and the second law of thermodynamics. The energetic and exergetic performance criteria such as thermal efficiency, exergy efficiency, and exergy loss have been found to be useful methods in design, evaluation, optimization and improvement of thermal power plants. The exergetic efficiency of a power plant shows that the boiler is the major component contributing to total loss, with its exergetic efficiency of 30%, while the steam turbine has the exergetic efficiency of 76%. The …

Ziegler-Natta Catalyst With High Activity And Good Hydrogen Response, L Sinthusai, W Trakarnpruk, R Strauss

Journal of Metals, Materials and Minerals

Ziegler-Natta catalysts were prepared from chemical reaction route comprising of steps of 1) magnesium complex formation between butyloctyl magnesium and 2-ethyl-1-hexanol, 2) MgCl2 support preparation from the reaction between the magnesium complex and TiCl4 as chlorinating agent and 3) titanation with TiCl4. The catalysts were used for ethylene polymerization using triethylaluminum as a cocatalyst. Effects influencing properties of catalysts and polymerization performance were investigated: triethylaluminum/Mg molar ratio, Ti/Mg molar ratio, addition of electron donor and aging step. Results show that addition of ethylbenzoate as an electron donor resulted in decreased catalytic activity. However it was found that catalytic stability under …

Synthesis And Characterization Of Sio2 Nanowires Prepared From Rice Husk Ash, S Pukird, P Chamninok, S Samran, P Kasian, K Noipa, L Chow

Journal of Metals, Materials and Minerals

SiO2 nanowires were synthesized by thermal evaporation of rice husk ash and coconut shell charcoal with the ratio of 1:2 by weight heated at a temperature of 1,350ο C in atmosphere of nitrogen for 1 hour. The scanning electron microscope and X-rays diffraction instrument are used to characterize the SiO2 nanowires. The SiO2 nanowires synthesized have diameters varying from 40 nm to 200 nm while the lengths were a few micrometers.

Utilization Of Rice Husk To Synthesize High-Performance Phosphors, L Xiong, K Saito, S Wada, E H. Sekiya

Journal of Metals, Materials and Minerals

Rice husk (RH) has high C and Si contents, so it can be used not only as a fuel candidate, but also as a low-cost Si source for synthesizing high-performance products. In the present work, we proposed a low-cost route to synthesize high-performance silicate phosphors with RH. RH was burned either as received or as pretreated by HCl washing. The resulting ashes were, respectively, utilized to react with other raw materials at high temperatures to form silicate phosphors. The high-temperature solid-state reaction process was optimized by varying either the temperature or the holding time. The crystallographic and fluorescent properties of …

Preparation Of Silica Gel From Rice Husk Ash Using Microwave Heating, S Rungrodnimitchai, W Phokhanusai, N Sungkhaho

Journal of Metals, Materials and Minerals

The purpose of this research is to separate silica gel from rice husk ash by microwave heating. The experiments were performed by heating rice husk ash in sodium hydroxide solution with various concentrations in microwave oven for 5 or 10 minutes. The obtained sodium silicate was neutralized to give silica gel. The best condition for silica gel production was the reaction with 2.0 M sodium hydroxide at microwave power of 800 W for 10 minutes. The ability of silica gel as desiccant was investigated by adsorption test. The results showed that silica gel prepared by low concentration of sodium hydroxide …

Utilization Of Silica In Rice Hulls As Raw Materials For Silicon Semiconductors, T Okutani

Journal of Metals, Materials and Minerals

Highly pure silicon and silicon compounds are required in high technology products such as semiconductors and solar cells. Rice hulls consist of 71 to 87wt% organic components such as cellulose and 13 to 29wt% inorganic components. In rice hulls, 87 to 97wt% of the inorganic components are silica (SiO2). Rice plants absorb water-soluble siliceous ions via the roots. These ions are transported to stems, leaves and rice hulls by sap flow. In rice hulls, siliceous ions accumulate at the cuticle outside of the epidermis. The production of pure silicon compound (SiCl4) and of silicon metal as the starting material for …

Pozzolanic Activity Of Rice Husk Ash: Comparison Of Various Electrical Methods, S Wansom, S Janjaturaphan, S Sinthupinyo

Journal of Metals, Materials and Minerals

The great abundance of rice husk ash (RHA) as low-cost agricultural waste in Thailand makes it the most suitable material for cement-based applications. However, the use of RHA as a supplementary cementitious material (SCM) is not yet widespread in Thailand due to the poor pozzolanic activity of most agricultural RHA. Most RHA is incinerated at too high temperatures (usually in excess of 1000ºC) or under uncontrolled conditions as biomass fuel. This reduces the amount of amorphous SiO2 and hence worsens the pozzolanic activity of the resulting RHA. To enhance the use of RHA as an SCM in Thailand, a proper …

Synthesis And Characterization Of Silicon-Silicon Carbide Composites From Rice Husk Ash Via Self-Propagating High Temperature Synthesis, S Niyomwas

Journal of Metals, Materials and Minerals

Silicon-Silicon Carbide (Si-SiC) composites were synthesized by self-propagating high temperature synthesis (SHS) from a powder mixture of rice husk ash (RHA)-C-Mg. The reaction was carried out in a SHS reactor under static argon gas at a pressure of 0.5 MPa. The standard Gibbs energy minimization method was used to calculate the equilibrium composition of the reacting species. The comparison of silica from RHA and commercial sources in the precursor mixture on the Si-SiC conversion has investigated using X-ray diffraction and scanning electron microscope technique. The as-synthesized products of Si-SiC-MgO powders were leached with 0.1M HCl acid solution to obtain the …

Utilization Of Rice Husk Ash Silica In Controlled Releasing Application, P Prawingwong, C Chaiya, P Reubroycharoen, C Samart

Journal of Metals, Materials and Minerals

Mesoporous silica was produced by sol-gel technique using rice husk ash as a silica source which was applied in the drug delivery system. The drug releasing behavior was studied in phosphate buffer using indigo carmine as a drug model. The textural properties of mesoporous silica were characterized and considered with the result of the releasing study. The pore volume and silanol group on the surface of mesoporous silica affected the releasing behavior. The larger pore volume could contain the larger amount of drug which showed fast release. The effect of the silanol group presented an interaction between the drug molecule …

Preparation And Characterization Of Silicon From Rice Hulls, E Swatsitang, M Krochai

Journal of Metals, Materials and Minerals

High purity silica can be prepared by reflux raw rice hulls in 1 N HCl for 45 minutes first, then pyrolyzed at 650°C for 3 hours in O2 atmosphere. The obtained white ash was examined by XRD showing a broad peak of amorphous silica at 2 theta = 22 degree. Silicon can be prepared by metallothermal reduction of pure silica at 650°C in Ar atmosphere for 1-3 hours, using magnesium (99% purity) as a reducing agent. High purity silicon (99.98 %) can be obtained by subsequently washing the as-reduced silica with HCl: H2O and HF: H2O solutions. The results from …

Designing An Instrument Based On Native Fluorescence To Determine Soil Microbial Content At A Mars Analog Site, Heather D. Smith

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

For this research project we designed an instrument to detect bacteria via biomolecular fluorescence. We introduce the current understanding of astrobiology, our knowledge of life beyond Earth, and the commonality of Earth life as it pertains to the search for life on Mars. We proposed a novel technique for searching for direct evidence of life on the surface of Mars using fluorescence. We use the arid region of the Mojave Desert as an analog of Mars. Results indicate the fluorescence of the biotic component of desert soils is approximately as strong as the fluorescence of the mineral component. Fluorescence laboratory …

Development Of An Air-Cycle Environmental Control System For Automotive Applications, Christopher James Forster

Master's Theses

An air‐cycle air conditioning system, using a typical automotive turbocharger as the core of the system, was designed and tested. Effects on engine performance were kept to a minimum while providing the maximum amount of cooling possible and minimizing weight and space requirements. A test stand utilizing shop compressed air was developed to measure component performance. An unmodified automotive turbocharger was tested initially as a baseline in a Reversed‐Brayton Cycle air cooling system. Once the baseline was established, another aircycle machine, assembled from commercial turbocharger components chosen individually to optimize their performance for cooling purposes, was tested to improve the …

A Computational Model Of Apoptotic Osteocyte Correlation To Cortical Bone Remodeling Parameters, Michael Stephen Alexander

Master's Theses

The onset of osteoporosis caused by aging, disease states, and post-menopausal conditions significantly impacts patient quality of life, required healthcare funding, personal autonomy losses from increased fracture risk and the subsequent corrective surgery. Research has indicated that osteocyte apoptosis may be a key parameter in bone remodeling, raising the possibility of remodeling rate modulation for the mitigation of bone mass resorption. By developing therapies that target osteocyte apoptosis, it may be possible to prevent undesired bone remodeling activity while maintaining a healthy balance between damage formation in the form of microcracks induced by the strain environment and the removal of …

Extraction And Characterization Of Lipids From Microalgae Grown On Municipal Wastewater, Matthew W. Hutton

Master's Theses

Based on results of its Aquatic Species Program (1978-1996), which sought to develop algae-to-liquid fuel technology, the U.S. Department of Energy has suggested that algal wastewater treatment may be incorporated into biodiesel production schemes to reduce the operating costs of both processes. the purpose of the current research was to evaluate the triglycerides produced by wastewater-grown algae for their suitability as a fuel feedstock and to investigate the effectiveness of several solvent mixtures and extraction procedures at recovering lipids from fresh algae. The research involved two separate experiments. The first determined the quantity and quality of lipids produced over the …

Detection And Tracking Of Stealthy Targets Using Particle Filters, Philip M. Losie

Master's Theses

In recent years, the particle filter has gained prominence in the area of target tracking because it is robust to non-linear target motion and non-Gaussian additive noise. Traditional track filters, such as the Kalman filter, have been well studied for linear tracking applications, but perform poorly for non-linear applications. The particle filter has been shown to perform well in non-linear applications. The particle filter method is computationally intensive and advances in processor speed and computational power have allowed this method to be implemented in real-time tracking applications. This thesis explores the use of particle filters to detect and track stealthy …

Single Cell Impedance Measurements Using Microfabricated Electrodes And Labview Graphical Programming, Stephanie Sophia Hernandez

Master's Theses

This Master’s Thesis project consists of the research, design, and fabrication of a system that could perform broadband impedance measurements (1kHz-20Mhz) of single cells using National Instruments Labview data acquisition and programming in coordination with a single cell capture device. Presented first is the background information on cells and their electrical properties, along with background in micro-total-analysis systems as well as impedance spectroscopy. Experimental Methods are then discussed for the electrode design, cellular modeling in COMSOL, fabrication methods, and Labview 8.0 Set-up and programming. Measurements were performed using the single-cell capture device on saline, yeast cells, and a polysterene bead. …

Me-Em Enewsbrief, December 2009, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Spatial Instability Of Electrically Driven Jets With Finite Conductivity And Under Constant Or Variable Applied Field, Saulo Orizaga, Daniel N. Riahi

Applications and Applied Mathematics: An International Journal (AAM)

We investigate the problem of spatial instability of electrically driven viscous jets with finite electrical conductivity and in the presence of either a constant or a variable applied electric field. A mathematical model, which is developed and used for the spatially growing disturbances in electrically driven jet flows, leads to a lengthy equation for the unknown growth rate and frequency of the disturbances. This equation is solved numerically using Newton’s method. For neutral temporal stability boundary, we find, in particular, two new spatial modes of instability under certain conditions. One of these modes is enhanced by the strength Ω of …

Cross Sections Used To Elucidate Differences In Wavelet Transforms Of Ground Force Reactions, Wesley John Orme

Boise State University Theses and Dissertations

A study done for the Centers for Disease Control (CDC) found that over 50% of sports related injuries are to the lower extremities [1] with additional studies indicating that females, adolescent through collegiate, have a higher rate of lower extremity sports related injuries than males [2-4]. Conditions surrounding non-contact injuries can be analyzed using ground reaction force (GRF) data from force plates during unanticipated single leg drops, however, the expected gender differences in GRF may not be apparent when viewing data independently in the time or frequency domains.

Graphing the results of a wavelet transform, currently used by scientific, medical, …

The Root Causes Of Errant Ordered Radiology Exams, Benjamin Duman

Boise State University Theses and Dissertations

The purpose of this research was to determine why there was a high number of errant radiology orders from requesting physicians at ATA Hospital. As the researcher, I wanted to clearly define errant orders, determine the root causes of errant orders, and further, make recommendations that would help diminish current as well as future order errors. This study answers three research questions: RQ1. Exactly what are the performance problems associated with errant orders within ATA Hospital’s radiology department that warrant further research? RQ2. What causes the increase in errant radiological orders at ATA Hospital? And, RQ3. What types of performance …

Material Sustainability, Jessica Meadows, Natasha Morris

Architectural Engineering

This paper addresses the sustainability of the materials used to construct buildings today. Timber, concrete and steel are analyzed for carbon output, cost, and recyclable-ability.

Water Conservation's Role In California Water Transfers, Charles M. Burt

BioResource and Agricultural Engineering

This paper describes various irrigation district water transfer projects. Water transfers have been of many types, including agriculture to agriculture, agriculture to urban, and agriculture to environment. In each case that will be described, the unique circumstances of each district will be described. Typical actions include developing a water balance to determine if “wet water” truly exists for conservation, then identifying the sources of that wet water. Subsequent actions include developing designs that will conserve the water, achieving board approval, and constructing and implementing the conservation measures.