Engineering Commons^™

Satellite Earth Observation And Surveillance Payloads, Rainer Sandau

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Rainer Sandau titled "Satellite Earth observation and surveillance payloads" from April 9, 2009.

Reflection Contributions To The Dispersion Artefact In Ftir Spectra Of Single Biological Cells, Paul Bassan, Hugh Byrne, Joe Lee, Franck Bonnier, Colin Clarke, Paul Dumas, Ehsan Gazi, Michael Brown, Noel Clarke, Peter Gardner

Articles

Fourier transform infrared spectra of a single cell in transflection geometry are seen to vary significantly with position on the cell, showing a distorted derivative-like lineshape in the region of the optically dense nucleus. A similar behaviour is observable in a model system of the protein albumin doped in a potassium bromide disk. It is demonstrated that the spectrum at any point is a weighted sum of the sample reflection and transmission and that the dominance of the reflection spectrum in optically dense regions can account for some of the spectral distortions previously attributed to dispersion artefacts. Rather than being …

Technical Note: A New Method For The Lagrangian Tracking Of Pollution Plumes From Source To Receptor Using Gridded Model Output, R. C. Owen, R. E. Honrath

Michigan Tech Publications, Part 1

Lagrangian particle dispersion models (LPDMs) are powerful and popular tools used for the analysis of atmospheric trace gas measurements. However, it can be difficult to determine the transport pathway of emissions from their source to a receptor using the standard gridded model output, particularly during complex meteorological scenarios. In this paper we present a method to clearly and easily identify the pathway taken by only those emissions that arrive at a receptor at a particular time, by combining the standard gridded output from forward (e.g., concentration) and backward (e.g., residence time) LPDM simulations. By comparing the pathway determined from this …

Gossamer Albatross, Steve Elliott

ERAU Prescott Aviation History Program

Steve Elliott was active in the hobby of hang gliding, and was invited to join the Gossamer Albatross team in 1979. He assisted in its development and testing, and was there in a Zodiac raft when it became the first human powered aircraft to cross the English Channel and win the £100,000 Kremer Prize.

From General Technology Familiarity To Anti-Spyware Program Adoption: Comparison Between The U.S. And South Korea, Dong-Heon Kwak

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Dong-Heon Kwak on April 7, 2009.

Distributed Satellite Systems For Earth Observation And Surveillance, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Rainer Sandau titled "Distributed satellite systems for Earth observation and surveillance" from April 7, 2009.

Methods For Simultaneous Control Of Lignin Content And Composition, And Cellulose Content In Plants, Vincent Lee C. Chiang, Laigeng Li

Michigan Tech Patents

The present invention relates to a method of concurrently introducing multiple genes into plants and trees is provided. The method includes simultaneous transformation of plants with multiple genes from the phenylpropanoid pathways including 4CL, CAld5H, AldOMT, SAD and CAD genes and combinations thereof to produce various lines of transgenic plants displaying altered agronomic traits. The agronomic traits of the plants are regulated by the orientation of the specific genes and the selected gene combinations, which are incorporated into the plant genome.

Selecting The Best Network For The Labview Remote Control System To Achieve Better Performance, Sivakrishna Nannapaneni

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for Degree of Masters of Science by Sivakrishna Nannapaneni on April 6, 2009.

A Technology Survey Of Emergency Recovery And Flight Termination Systems For Uas, Richard Stansbury, Wesley Tanis, Timothy Wilson

Publications

For safe flight in the National Airspace System (NAS), either under the current interim rules or under anticipated longer-term regulatory guidelines facilitating unmanned aircraft system (UAS) access to the NAS, the UAS must incorporate technologies and flight procedures to ensure that neither people nor property in the air, on the ground, or on or in the water are endangered by the failure of an onboard component, by inappropriate unmanned aircraft (UA) response to pilot commands, or by inadvertent entry by the UA into prohibited airspace. The aircraft must be equipped with emergency recovery (ER) procedures and technologies that ensure that …

Miniaturization Techniques To Realize Very Small Satellites, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint presentation created by Professor Bob Twiggs titled "Miniaturization Techniques to Realize Very Small Satellites" from April 6, 2009.

Architectural Optimization Of Decomposition Algorithms For Wireless Communication Systems, Ali Irturk, Bridget Benson, Nikolay Laptev, Ryan Kastner

Electrical Engineering

Matrix decomposition is required in various algorithms used in wireless communication applications. FPGAs strike a balance between ASICs and DSPs, as they have the programmability of software with performance capacity approaching that of a custom hardware implementation. However, FPGA architectures require designers to make a countless number of system, architectural and logic design decisions. By performing design space exploration, a designer can find the optimal device for a specific application, however very few tools exist which can accomplish this task. This paper presents automatic generation and optimization of decomposition methods using a core generator tool, GUSTO, that we developed to …

Sustainability And Civil Engineering, Jeremy D. Rodgers

Ohio Valley Regional Student Conference

No abstract provided.

Characterization Of Pet Samples Processed In An Rf Oxygen Discharge, Russell L. Rhoton

Master's Theses and Doctoral Dissertations

A radio frequency plasma (13.56 MHz) was used to modify the surface of a poly (ethylene terepthalate) (PET) sample. The plasma was generated in a pure oxygen process atmosphere at pressures of 100 mTorr, and 2.0 Torr at output powers of 250 Watts and 500 Watts.

Optical emission spectroscopy (OES) was used to characterize the plasma/sample interaction. Spectra were measured from 250 nm to 900 nm during each of the processing sessions.

The spectra showed changes depending upon the pressure of the plasma. Molecules of OH and atomic oxygen were observed at low pressures (100 mTorr), whereas CO and atomic …

Aisi Manual -- Cold-Formed Steel Design, 2008 Edition, American Iron And Steel Institute

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The material contained herein has been developed by the American Iron and Steel Institute Committee on Specifications for the Design of Cold-Formed Steel Structural Members. The Committee has made a diligent effort to present accurate, reliable, and useful information on cold-formed steel design. The Committee acknowledges and is grateful for the contributions of the numerous researchers, engineers, and others who have contributed to the body of knowledge on the subject.

With anticipated improvements in understanding of the behavior of cold-formed steel and the continuing development of new technology, this material may eventually become dated. It is anticipated that AISI will …

Water For Life: A Journey To Nicaragua Exploring Sustainable Development, Edwin P. Maurer

Civil, Environmental and Sustainable Engineering

When I first arrived in the Peruvian Altiplano as a Maryknoll missioner 15 years ago, I was struck by the presence of a beautifully engineered system of irrigation canals extending through several communities. Engineers love to solve problems, and seeing progress like this in a very poor region of mostly subsistence farming was encouraging…until I learned that it had never delivered a drop of water, and probably never would. The design of the system had been done by outsiders unfamiliar with the intricacies of farming in the harsh, high-elevation climate, completely unaware of the unique form of land ownership. As …

Assessing Reservoir Operations Risk Under Climate Change, Levi D. Brekke, Edwin P. Maurer, Jamie D. Anderson, Michael D. Dettinger, Edwin S. Townsley

Civil, Environmental and Sustainable Engineering

Risk-based planning offers a robust way to identify strategies that permit adaptive water resources management under climate change. This paper presents a flexible methodology for conducting climate change risk assessments involving reservoir operations. Decision makers can apply this methodology to their systems by selecting future periods and risk metrics relevant to their planning questions and by collectively evaluating system impacts relative to an ensemble of climate projection scenarios (weighted or not). This paper shows multiple applications of this methodology in a case study involving California's Central Valley Project and State Water Project systems. Multiple applications were conducted to show how …

Acuta Enews April 2009, Vol 38, No. 4

ACUTA Newsletters

ln This lssue

From the President.. .....Corinne Hoch, Columbia Univ., ACUTA President

Board Report......... Riny Ledgerwood, San Diego State Univ., ACUTA Secretory/Treasurer

Tech Talk: After a Long Dry Spell, We Find a Good Acronym ....... Kevin Tanzillo, Dux PR

Corporate Liaison Committee

DC Update ................ Dave Ostrom, Washington State Univ. (retired)

"Financial Crisis Activity in Washington" Newsletter for ACUTA Members

Turning Business Relationships into Partnerships ..... Don Leone, Siemens Enterprise Communications

Q & A from the ACUTA Listserv

lnfo Links .......... Randy Hayes, Univ. of Northern lowa

Welcome New Members

Check lt Out: Press Releases...Job Postings...RFls/RFPs

Integrated Reliability And Sizing Optimization Of A Large Composite Structure, Christopher D. Eamon, Masoud Rais-Rohani

Civil and Environmental Engineering Faculty Research Publications

In this paper, we present the application of probabilistic design modeling and reliability-based design optimization (RBDO) methodology to the sizing optimization of a composite advanced submarine sail structure under parametric uncertainty. With the help of probabilistic sensitivity analysis, the influence of individual random variables on each structural failure mode is examined, and the critical modes are treated as probabilistic design constraints under consistent lower bounds on the corresponding reliability indices. Whereas the failure modes are applied to structural components in the solution of the RBDO problem, the overall system reliability is also evaluated as a post-optimization step. The results indicate …

Aircraft Landing Operations On Contaminated Runways, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Lower Hobble Creek Ecosystem Flow Recommendations, Melissa Stamp, Thomas Eddie, Darren Olsen, Tyler Allred

All In-stream Flows Material

This report describes the process and products of developing a suite of year-round instream flow recommendations for lower Hobble Creek in Utah County, Utah. This project was undertaken by the Utah Reclamation Mitigation and Conservation Commission (the Commission) as a component of the June Sucker Recovery Implementation Program (JSRIP) 2008 Work Plan (JSRIP 2008). The Commission is a Federal agency established by the Central Utah Project Completion Act (CUPCA [Titles II through VI of Public Law 102-575]). The Commission is responsible for mitigating impacts of the Bonneville Unit of the Central Utah Project (CUP) on fish, wildlife, and related recreation …

Sustainable Portland: Implementation Series 2, New England Environmental Finance Center

Climate Change

The Portland Municipal Climate Change Working Group prepared a report in March 2008 that outlined several recommendations as a commitment by the City to address greenhouse gas emissions (GHG) produced during daily municipal operations. The Municipal Climate Action Plan was written in partnership with Clean Air – Cool Planet and Portland officials, and acknowledges under Recommendation #2 that an employee energy efficiency program would provide significant positive impact on the City’s reduction of greenhouse gas emissions. Best practices from three cities show that focus on the greening of City Hall is critical in developing a program that promotes partnerships, community …

Interim Report On Iso Tc163 Working Group 3, Florida Solar Energy Center, Philip W. Fairey

FSEC Energy Research Center®

This report covers the initial year efforts of the International Standards Organization (ISO) to develop international standards for rating the energy performance of buildings. The author of this report is a participant in this effort. This report summarizes the activities of the ISO Working Group charged with development of these standards and makes recommendations to the sponsors for future U.S. involvement in this ISO effort.

Expert Knowledge Is Needed For Design Under Uncertainty: For P-Boxes, Backcalculation Is, In General, Np-Hard, Vladik Kreinovich

Departmental Technical Reports (CS)

In engineering design problems, we want to make sure that a certain quantity c of the designed system lies within given bounds -- or at least that the probability of this quantity to be outside these bounds does not exceed a given threshold. We may have several such requirements -- thus the requirement can be formulated as bounds on the cumulative distribution function F(x) of the quantity c; such bounds are known as a p-box.

The value of the desired quantity c depends on the design parameters a and the parameters b characterizing the environment: c=f(a,b). To achieve the design …

What Is The Best Way To Distribute Efforts Among Students: Towards Quantitative Approach To Human Cognition, Olga Kosheleva, Vladik Kreinovich

Departmental Technical Reports (CS)

In a typical class, we have students at different levels of knowledge, student with different ability to learn the material. In the ideal world, we should devote unlimited individual attention to all the students and make sure that everyone learns all the material. In real life, our resources are finite. Based on this finite amount of resources, what is the best way to distribute efforts between different students?

Even when we know the exact way each student learns, the answer depends on what is the objective of teaching the class. This can be illustrated on two extreme example: If the …

Applied Electrokinetics For Tissue Engineering Applications, Stephanie R. Tully-Dartez

Doctoral Dissertations

Tissue engineering could provide an alternative source of transplant tissue regardless of donor supply and with reduced risk of immune rejection. Engineered tissue requires three critical components for successful development: the cells, growth factors, and the scaffold on which they will initially grow. The scaffold acts as a temporary extracellular matrix (ECM) allowing cell attachment and acclimation to the environment prior to synthesis and construction of the cell's native ECM. Prior to cell seeding, the scaffold must be characterized to determine whether or not the pore geometry is conducive to cell implantation. Electrochemical impedance spectroscopy (EIS) provides a unique and …

Case Study In Implementing A Service-Learning Class In A Construction Management Curriculum, Philip L. Barlow

Construction Management

Service-learning is a pedagogical approach which gives the students an opportunity to develop professional and social skills in concert with learning and reflecting on curricular material. This is achieved through a student’s active participation in a meaningful community service project, open and interactive reflection, formal class lectures, and discussions. This case study discusses the results of implementing a pilot service-learning undergraduate class in a state university construction management program. The course was offered as a two-credit hour voluntary technical elective in the Spring quarter of 2008. The organization of this study first puts service-learning into context by giving a brief …

Impulse, Eric Ebsen, Dan Genzler, Dana Hess, Kyle Johnson

Impulse (Jerome J. Lohr College of Engineering Publication)

College:
[Page] 2 Electrical Engineering & Computer Science Building: Staff took occupancy of the 43,000-square-foot structure during spring break with the public invited to a May 1 dedication.
[Page] 4 Master’s in physics: As the state takes over an underground lab in the Black Hills, SDSU is launching a program to assist students wanting to work there.
[Page] 6 Adding up to success: Math majors find more paths on the track to success and that’s been a prime factor in the multiplication of math majors.
[Page] 8 What happened in New Orleans? Levee expert shares insight on how Katrina claimed …

Carbon Sponsoring: A New Idea In Personal Carbon Trading, Direct Carbon Offset Pledges For Travel, Alexander Y. Bigazzi

Civil and Environmental Engineering Undergraduate Honors Theses

Public and political consensus expresses the need for broad action to mitigate climate change. To this end, different forms of carbon trading exist to initiate carbon reduction projects. This thesis proposes the idea of carbon sponsoring, a new tool for personal carbon trading. Unlike carbon offsets, the main option for individuals wishing to mitigate their carbon footprint, carbon sponsoring is a purely social instrument involving carbon-reducing pledges. Carbon sponsoring is intended for individuals who seek immediate, direct carbon offsets for their personal emissions. It is not meant as a broad tool correcting the various deficiencies of the carbon trading markets, …

Simulation And Behavior Of Corrosion Deteriorated Reinforced Concrete Members, M. A. Shayanfar, Amir Safiey

Publications

Several reinforced concrete (RC) infrastructures are now crumbling from corrosion of steel bars in concrete. The paper presents the recent advancements in analytical simulation of corrosion aftereffects on behavior of RC members. The model juxtaposes the experimental findings with analytical relationships. The implementation of the model into a nonlinear finite element formulation as well as the experimental and analytical backgrounds are discussed. The abilities of the resulted program have been studied by modeling some experimental specimens showing a reasonable agreement between the analytical and experimental findings.

Embodied Energy Analysis: A Sustainable Construction Design Assessment Tool, Adolf Acquaye, Aidan Duffy, Biswajit Basu

Conference Papers

Embodied energy analysis can be used as a construction design assessment tool in a sustainable matrix for a building. Its implementation however remains challenging mainly because of data measurement errors. A comparison between the deterministic embodied energy (EE) of a building and the stochastic EE of the same building undertaken using Monte Carlo simulation showed a wide variation in results. It is recommended that the specification of EE intensity of building materials in the construction industry can assist in producing accurate and more credible EE values of building.