Engineering Commons^™

Extended Superposed Quantum State Initialization Using Disjoint Prime Implicants, David Rosenbaum, Marek Perkowski

Electrical and Computer Engineering Faculty Publications and Presentations

Extended Superposed Quantum State Initialization Using Disjoint Prime Implicants (ESQUID) is a new algorithm for generating quantum arrays for the purpose of initializing a desired quantum superposition. The quantum arrays generated by this algorithm almost always use fewer gates than other algorithms and in the worst case use the same number of gates. These improvements are achieved by allowing certain parts of the quantum superposition that cannot be initialized directly by the algorithm to be initialized using special circuits. This allows more terms in the quantum superposition to be initialized at the same time which decreases the number of gates …

A Flight Simulation Study Of The Simultaneous Non-Interfering Aircraft Approach, Brian H. Reel

Master's Theses

Using a new implementation of a NASA flight simulation of the Quiet Short-Haul Research Aircraft, autopilots were designed to be capable of flying both straight in (ILS) approaches, and circling (SNI) approaches. A standard glideslope coupler was sufficient for most conditions, but a standard Proportional-Integral-Derivative (PID) based localizer tracker was not sufficient for maintaining a lateral track on the SNI course. To track the SNI course, a feed-forward system, using GPS steering provided much better results.

NASA and the FAA embrace the concept of a Simultaneous, Non-Interfering (SNI) approach as a way to increase airport throughput while reducing the noise …

Harmonic Analysis Of A Static Var Compensated Mixed Load System, James David Ruckdaschel

Master's Theses

As power electronic based controllers and loads become more prevalent in power systems, there is a growing concern about how the harmonics generated by these controllers and loads affect the power quality of the system. One widely used power electronic based load is the Variable Frequency Drive (VFDs) used to vary the speed of an induction motor; whereas a common example of a power electronic based controller used in power systems is the Static VAR Compensator (SVC) for improving a system’s power factor. In this thesis, the harmonic content and overall performance of a system including both a VFD and …

Development Of An In-Vitro Tissue Engineered Blood Vessel Mimic Using Human Large Vessel Cell Sources, Dimitri E. Delagrammaticas

Master's Theses

Tissue engineering is an emerging field that offers novel and unmatched potential medical therapies and treatments. While the vast aim of tissue engineering endeavors is to provide clinically implantable constructs, secondary applications have been developed to utilize tissue-engineered constructs for in-vitro evaluation of devices and therapies. Specifically, in-vitro blood vessel mimics (BVM) have been developed to create a bench-top blood vessel model using human cells that can be used to test and evaluate vascular disease treatments and intravascular devices. Previous BVM work has used fat derived human microvascular endothelial cells (EC) sodded on an ePTFE scaffold. To create a more …

Implementation Of Physiologic Flow Conditions In A Blood Vessel Mimic Bioreactor System For The Evaluation Of Intravascular Devices, Marc Cody Dawson

Master's Theses

The prevalence and devastating nature of cardiovascular diseases has led to many advancements in the therapies used to treat the millions of patients that suffer as a result of these conditions. As coronary artery disease (CAD) is the most common of these cardiovascular conditions, it is a major focus of research among the medical industry. Although lifestyle changes and drug therapies can treat early CAD, more advanced cases often require more definitive interventions. In conjunction with angioplasty, stenting of an occluded vessel has shown significant success in preventing restenosis. However, as with nearly every therapeutic process in the medical field, …

Comparison And Design Of Simplified General Perturbation Models (Sgp4) And Code For Nasa Johnson Space Center, Orbital Debris Program Office, Nicholas Z. Miura

Master's Theses

This graduate project compares legacy simplified general perturbation model (SGP4) code developed by NASA Johnson Space Center, Orbital Debris Program Office, to a recent public release of SGP4 code by David Vallado. The legacy code is a subroutine in a larger program named PREDICT, which is used to predict the location of orbital debris in GEO. Direct comparison of the codes showed that the new code yields better results for GEO objects, which are more accurate by orders of magnitude (error in meters rather than kilometers). The public release of SGP4 also provides effective results for LEO and MEO objects …

Design And Control Considerations For A Skid-To-Turn Unmanned Aerial Vehicle, Tanner Austin Sims

Master's Theses

The use of Unmanned Aerial Vehicles (UAVs) are rapidly expanding and taking on new roles in the military. In the area of training and targeting vehicles, control systems are expanding the functionality of UAVs beyond their initially designed purpose. Aeromech Engineering’s NXT UAV is a high speed target drone that is intended to simulate a small aircraft threat. However, in the interest of increasing functionality, enabling NXT to accomplish wings level skidding turns provides the basis for a UAV that can simulate a threat from a missile. Research was conducted to investigate the aerodynamic and performance characteristics of a winged …

Target Tracking Using Various Filters In Synthetic Aperture Radar Data And Imagery, Jessica L. Kiefer

Master's Theses

This thesis explores the use and accuracy of several discrete-time image filters for the purpose of target tracking in Synthetic Aperture Radar imagery. Both extended targets and point targets are used for tracking, showing the need for different types of filters for each target type.

Monte Carlo analysis is performed on the results of the extended target filter results to determine the absolute mean-squared error between the filter prediction of the target centroid and the actual location of the target centroid. Two different filters were chosen for the extended target: Kalman and H Infinity.

Both the Kalman and H Infinity …

Investigation Of The Electromagnetic Interference Shielding Of Titanium Carbide Coated Nanoreinforced Liquid Crystalline Polymer, Karen Lozano, Lesly Espinoza, K. Hernandez, Ananta R. Adhikari, Gangaram Radhakrishnan, P. M. Adams

Mechanical Engineering Faculty Publications

The development and analysis of electrical and electromagnetic interference shielding effectiveness of titanium carbide (TiC)-coated carbon nanofiber (CNF) reinforced liquid crystalline polymer composites are presented. The studied samples consisted of different weight percentages (5, 10, and 15 wt %) of CNFs distributed and dispersed homogeneously within the polymeric matrix. A titanium carbide layer was deposited using pulsed laser deposition, and was conducted at room temperature, which eliminated possible thermal degradation of the polymer matrix. The effect of the thickness of the TiC layer on the electrical properties of the polymeric composites was analyzed. A synergistic behavior between the TiC coating …

Design And Fabrication Of A Small Prototype Airframe Structure, Kimberly Lynn Clark

UNLV Theses, Dissertations, Professional Papers, and Capstones

This project called for a first-generation prototype aircraft with hovering capabilities that was lightweight. The focus of this study was to design a small low-cost prototype composite airframe that meets specified requirements, analyze structures using finite element analysis and mechanical testing, and construct a prototype using proven composite manufacturing techniques. One fuselage, one wing, and several engine nacelles were designed and fabricated. Several design and fabrication methods and materials were analyzed, with focus given to the nacelles, and recommendations were provided for the manufacture of the first generation airframe based on time, weight, and cost.

Hydrologic Information Systems: Advancing Cyberinfrastructure For Environmental Observatories, Jeffery S. Horsburgh

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Recently, community initiatives have emerged for the establishment of large-scale environmental observatories. Cyberinfrastructure is the backbone upon which these observatories will be built, and scientists' ability to access and use the data collected within observatories to address research questions will depend on the successful implementation of cyberinfrastructure. The research described in this dissertation advances the cyberinfrastructure available for supporting environmental observatories. This has been accomplished through both development of new cyberinfrastructure components as well as through the demonstration and application of existing tools, with a specific focus on point observations data. The cyberinfrastructure that was developed and deployed to support …

Uncertainty Analysis For Land Surface Model Predictions: Application To The Simple Biosphere 3 And Noah Models At Tropical And Semiarid Locations, Joshua K. Roundy

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Uncertainty in model predictions is associated with data, parameters, and model structure. The estimation of these contributions to uncertainty is a critical issue in hydrology. Using a variety of single and multiple criterion methods for sensitivity analysis and inverse modeling, the behaviors of two state-of-the-art land surface models, the Simple Biosphere Model 3 and Noah model, are analyzed. The different algorithms used for sensitivity and inverse modeling are analyzed and compared along with the performance of the land surface models. Generalized sensitivity and variance methods are used for the sensitivity analysis, including the Multi-Objective Generalized Sensitivity Analysis, the Extended Fourier …

Constraint-Based Dynamic Programming For Decentralized Pomdps With Structured Interactions, Akshat Kumar, Shlomo Zilberstein

Research Collection School Of Computing and Information Systems

Decentralized partially observable MDPs (DEC-POMDPs) provide a rich framework for modeling decision making by a team of agents. Despite rapid progress in this area, the limited scalability of solution techniques has restricted the applicability of the model. To overcome this computational barrier, research has focused on restricted classes of DEC-POMDPs, which are easier to solve yet rich enough to capture many practical problems. We present CBDP, an efficient and scalable point-based dynamic programming algorithm for one such model called ND-POMDP (Network Distributed POMDP). Specifically, CBDP provides magnitudes of speedup in the policy computation and generates better quality solution for all …

Experimental Evaluation And Modeling Of Engine Driven Heat Pump, Isaac Y. Mahderekal

UNLV Theses, Dissertations, Professional Papers, and Capstones

Recently, the Gas Engine-Driven Heat Pump (GHP) System has become an economic choice and more attractive climate control system than the conventional air conditioner due to its advantage in reducing fossil fuel consumption and environmental pollution. The GHP is a new type of heat pump in which the compressor (the core part) is driven by a gas engine. The GHP typically uses the work produced by the engine to drive a vapor-compression heat pump. At the same time, the waste heat rejected by the engine is used for heating purposes.

To improve the system performance of the GHP, a numerical …

Modulated Nanopores Using Pulse Anodization On Thin Aluminum, Mahesh Babu Gunukula

UNLV Theses, Dissertations, Professional Papers, and Capstones

Nanoporous anodic aluminum oxide has traditionally been made in one of two ways: "Mild Anodization (MA)" or "Hard Anodization (HA)". The former method produces self-ordered pore structures but it is slow and only works for a narrow range of processing conditions; the latter method, which is widely used in the aluminum industry, is faster but it produces films with disordered pore structures. Here we report a novel approach termed "pulse anodization" that combines the advantages of the MA and HA processes. By designing the pulse sequences it is possible to control both the composition and pore structure of the anodic …

Magnetic Sensors For Biodetection, Pranjali Vineet Sneha Deshpande

UNLV Theses, Dissertations, Professional Papers, and Capstones

The objective of thesis is to design magnetic sensor for detection of nanoparticles. Recently integrating the standard laboratory techniques into integrated system on chip is growing attention. Recent development is to combine magnetic markers and magnetoresistive sensors together in magnetic chip. In this thesis two magnetoresistive sensors were studied and designed.

By applying magnetic fields, magnetic nanoparticles can be manipulated on-chip, which can be utilized to pull the molecules to specific binding sites or to test the binding strength and distinguish between specifically and non-specifically bound molecules

Magnetoresistive sensors are compatible with the semiconductor industry which provides electronic signal directly …

Text Categorization Based On Apriori Algorithm's Frequent Itemsets, Prathima Madadi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Automatic Text categorization is the task of assigning an electronic document to one or more categories, based on its contents. There are many known techniques to efficiently solve categorization problems. Typically these techniques fall into two distinct methodologies which are either logic based or probabilistic. In recent years, many researchers have tried approaches which area hybrid of these two methodologies.

In this thesis, we deal with document categorization using Apriori Algorithm. The Apriori algorithm was initially developed for data mining and basket analysis applications in the relational databases. Although the technique is logic based, it also relies on the statistical …

Investigation Of Magnetic Resonance Imaging And Spectroscopy For The Detection Of Breast Cancer, Robert Thomas Etnire

UNLV Theses, Dissertations, Professional Papers, and Capstones

Magnetic resonance imaging (MRI) of the breast offers an alternative to screening mammography which may benefit those women at high risk for breast cancer, women under the age of 40, and those with dense breast tissue. One concern with MRI is the number of high false positives. Coupling MRI with magnetic resonance spectroscopy(MRS) may lower the number of false positives, and thus improve the diagnostic capabilities of MRI for the clinician. MRS for breast imaging focuses on the total choline containing compounds in the spectra in the suspected breast lesion to analyze areas of concern. The results of the study …

The Influence Of Carbon Source Types And Nitrate On The Performance Of The Enhanced Biological Phosphorus Removal Systems, Shamim Ara Begum

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research focuses on two issues in enhanced biological phosphorus removal (EBPR). The first issue encompasses the effect of the type of carbon sources (i.e. volatile fatty acids and non volatile fatty acids) on the microbiology of EBPR. The second issue deals with the influence of denitrification on EBPR. Few studies have been performed to investigate these two issues. The recent findings on these areas are summarized below to establish the knowledge gaps this dissertation attempted to address. Details on the specific findings can be found in the literature review portion of this proposal.

Low Power Fft Processor Design Considerations For Ofdm Communications, David Layne Rushforth

UNLV Theses, Dissertations, Professional Papers, and Capstones

Today's emerging communication technologies require fast processing as well as efficient use of resources. This project specifically addresses the power-efficient design of an FFT processor as it relates to OFDM communications such as cognitive radio. The Fast Fourier Transform (FFT) processor is what enables the efficient modulation in OFDM. As the FFT processor is the most computationally intensive component in OFDM communication, the power efficiency improvement of this component can have great impacts on the overall system. These impacts are significant considering the number of mobile and remote communication devices that rely on limited battery-powered operation. This project explores current …

Evaluation Of Low-Temperature Fluoride Routes To Synthesize Actinide Nitrides And Oxide Solid Solutions, Gunanda Waduge Chinthaka Silva

UNLV Theses, Dissertations, Professional Papers, and Capstones

Actinide mononitrides have been considered as a possible nuclear fuel for the Generation-IV nuclear reactor systems. In the process of evaluating these actinide mononitrides as nuclear fuel, it is important to study different chemical and physical characteristics of these compounds. Synthesis of the materials is thus important. Carbothermic reduction is one of the techniques that have been used to synthesize actinide mononitrides. In this method, a mixture of actinide oxide such as UO ₂ and excess carbon is heat treated at temperatures greater than 1700 °C under a nitrogen atmosphere. The technique is however not promising in synthesizing the actinide …

Electron Density And Electron Neutral Collision Frequency In The Ionosphere Using Plasma Impedance Probe Measurements On Sounding Rockets, Swadesh Patra

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The Plasma Impedance Probe (PIP) is an RF-instrument that is used to measure plasma electron density and electron neutral collision Frequency. Radio Frequency probe techniques for the determination of plasma parameters are attractive especially because the RF response is not susceptible to spacecraft charging problems at frequencies above the electron plasma frequency where ion sheath effects are negligible. The work done in this thesis is presented as a compendium of two papers, the first paper dealing with PIP measurements on a sounding rocket mission and the second being a qualitative study of the effects of spacecraft aerodynamics on the impedance …

Metering Secondary Water In Residential Irrigation Systems, Gregory L. Richards

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The use of residential secondary or dual water systems for irrigation purposes is common in the western United States where water supplies are scarce. While the use of non-potable water in secondary systems has successfully curtailed demands on potable systems, experience has shown that overall water use actually increases with the introduction of a secondary supply because users commonly pay a fixed fee and have unlimited water use. While water metering and billing effectively reduce water use, there are two main obstacles to the widespread installation of meters in secondary systems.

The first obstacle is that standard residential water meters …

Surface Wave Propagation In A Dielectric Waveguide Loaded With An Anisotropic, Conductive, And Spatially Dispersive Substrate, Tushar Andriyas

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis presents an analytical treatment of surface waves inside a dielectric slab loaded with a conductive and spatially dispersive semiconductor-like substrate. The work is primarily focused on the modelling of the substrate and getting the field solutions out from the Helmholtz equation. Appropriate boundary conditions have been used in order to get a unique dispersion relation. The surface wave modes are then extracted from the relation by using a root-searching algorithm, which in this work is the MATLAB Genetic Algorithm toolbox. Many different substrate configurations have been considered, starting from the very basic isotropic case to the most complex …

Behavior Of Prestressed Concrete Bridge Girders, Franklin B. Angomas

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

For this research, prestress losses were monitored in six HPC bridge girders. These measured losses were compared to predicted losses according to four sources. Prestress loss predictive methods considered for this research were: 1- AASHTO LRFD 2004, 2- AASHTO LRFD 2004 Refined, 3- AASHTO LRFD 2007, and 4- AASHTO LRFD Lump Sum method. On the other hand, the camber prediction methods used in the present research were: 1- Time dependent method described in NCHRP Report 496, 2- PCI multiplier method, and 3- Improved PCI Multiplier method. For the purpose of this research, long-term prestress losses were monitored in select girders …

Measurement Of Air Pollutant Emissions From A Confined Poultry Facility, Olumuyiwa Omotola Ogunlaja

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Air emissions from animal feeding operations have become a growing concern. Much work has been done to study occupational exposures and the exhaust concentrations associated with animal facilities; however little information has been provided about air quality around the houses. Ammonia (NH₃ ), ethanol (EtOH), nitrous oxide (N₂O), carbon dioxide (CO₂), and particulate matter (PM _2.5 and PM₁₀) emissions were monitored in two different buildings for laying hens in northern Utah. Over the six-month sampling period, the observed average temperatures for the west and east fan banks of the high-rise building were 21.2±4 …

A Comprehensive Integration And Analysis Of Dynamic Load Balancing Architectures Within Molecular Dynamics, Christopher Reed Rogers

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The world of nano-science is an ever-changing field. Molecular Dynamics (MD) is a computational suite of tools that is useful for analyzing and predicting behaviors of substances on the molecular level. The nature of MD is such that only a few types of computations are repeated thousands or sometimes millions of times over. Even a small increase speedup or efficiency of an MD simulator can compound itself over the life of the simulation and have a positive and observable effect. This thesis is the end result of an attempted speedup of the MD problem. Two types of MD architectures are …

Sediment Transport Impacts Upon Culvert Hydraulics, Wade H. Goodridge

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Sedimentation buildup and accumulation can cause serious impediments to the hydraulic capacity of culvert systems. There has not been any significant research to date regarding the behavior of bed load transport nor the implications of bed forms upon the hydraulics associated with culvert flow. The primary objective of this study was to investigate how sediment transport occurs in a culvert and to then develop a methodology and test setup to successfully investigate this sediment transport. The investigation was limited to studying culvert and pipeline transport of alluvial material in sand and gravel sizes.

This dissertation develops a semi-empirical bed load …

A Methodology To Design Pipelined Simulated Annealing Kernel Accelerators On Space-Borne Field-Programmable Gate Arrays, Jeffrey Michael Carver

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Increased levels of science objectives expected from spacecraft systems necessitate the ability to carry out fast on-board autonomous mission planning and scheduling. Heterogeneous radiation-hardened Field Programmable Gate Arrays (FPGAs) with embedded multiplier and memory modules are well suited to support the acceleration of scheduling algorithms. A methodology to design circuits specifically to accelerate Simulated Annealing Kernels (SAKs) in event scheduling algorithms is shown. The main contribution of this thesis is the low complexity scoring calculation used for the heuristic mapping algorithm used to balance resource allocation across a coarse-grained pipelined data-path. The methodology was exercised over various kernels with different …

Full-Wave Analyses Of Nano-Electromechanical Systems Integrated Multifunctional Reconfigurable Antennas, Xiaoyan Yuan

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This thesis work builds upon the theoretical studies and full-wave analysis of radio frequency micro- and nano-electromechanical systems (RF M/NEMS) integrated multi-functional reconfigurable antennas(MRAs). This is a part of the overall μN∈MS research efforts performed in the RF NEMS Laboratory at USU, which includes design, microfabrication, test, and characterization of M/NEMS integrated congitive wireless communication systems (fig. A.1).

The thesis work focuses on two MRAs. 1) A triple bands patch antenna which can operate at 800, 2400, and 4900 MHz in response to public safety wireless communication systems. 2) A multi-frequency multi-polarization MRA for wireless personal area networking application (WPAN) …