Engineering Commons^™

Diesel Particulate Matter Quantification And Reduction Strategies For School Buses, David Martinez-Morett

Theses and Dissertations

This thesis evaluated the contributions of school bus self pollution from both the crankcase and the tailpipe emissions to in-cabin levels of fine and ultrafine particulate matter, and determined the effectiveness of commercially available retrofit technologies towards reducing levels of particulate matter inside the school bus passenger compartment. Mobile tests were conducted with a school bus powered by an International DT466E engine on an outdoor test track. Measurements of fine and ultrafine particle concentrations within the cabin of a school bus were performed with and without retrofit technologies.

The tests utilized a drive cycle using data from actual school bus …

Puerto Rico - Pv Training Program Study - Final Report, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

This Final Report summarizes the work preformed on the program entitled "Puerto Rico PV Training Program Study" for the period April 14, 2008 to June 30, 2009. The program was a contract effort between Mech-Tech College, Caguas, Puerto Rico and the Florida Solar Energy Center/University of Central Florida, Cocoa, Florida. Mech-Tech College was interested in learning about and applying renewable energy technologies and providing college level courses for the future workforce of a renewable energy industry in Puerto Rico. This report documents the activities of Florida Solar Energy Center to assist Mech-Tech College in the design, development and implementation of …

Development Of An Electroencephalography-Based Brain-Computer Interface Supporting Two-Dimensional Cursor Control, Dandan Huang

Theses and Dissertations

This study aims to explore whether human intentions to move or cease to move right and left hands can be decoded from spatiotemporal features in non-invasive electroencephalography (EEG) in order to control a discrete two-dimensional cursor movement for a potential multi-dimensional Brain-Computer interface (BCI). Five naïve subjects performed either sustaining or stopping a motor task with time locking to a predefined time window by using motor execution with physical movement or motor imagery. Spatial filtering, temporal filtering, feature selection and classification methods were explored. The performance of the proposed BCI was evaluated by both offline classification and online two-dimensional cursor …

Spatial Detection Of Multiple Movement Intentions From Sam-Filtered Single-Trial Meg For A High Performance Bci, Harsha Battapady

Theses and Dissertations

The objective of this study is to test whether human intentions to sustain or cease movements in right and left hands can be decoded reliably from spatially filtered single trial magneto-encephalographic (MEG) signals. This study was performed using motor execution and motor imagery movements to achieve a potential high performance Brain-Computer interface (BCI). Seven healthy volunteers, naïve to BCI technology, participated in this study. Signals were recorded from 275-channel MEG and synthetic aperture magnetometry (SAM) was employed as the spatial filter. The four-class classification for natural movement intentions was performed offline; Genetic Algorithm based Mahalanobis Linear Distance (GA-MLD) and direct-decision …

A Descriptive Study Of The Remote Operation And Automation Of The Vhf/Uhf System For Tracking And Controlling Kysay-1 At Morehead State University, Marc B. Beck

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Marc B. Beck on July 27, 2009.

Hardware Acceleration Of Multi-View Face Detection, Jungok Cho, Bridget Benson, Ryan Kastner

Electrical Engineering

This paper presents a parallelized architecture for hardware acceleration of multi-view face detection. In our architecture, the multi-view face detection system generates rotated image windows and their integral image windows for each classifier which perform parallel classification operations to detect non-upright (rotated) and non-frontal (profile) faces in the images. We use the training data from OpenCV to detect the frontal and profile faces based on the Viola and Jones algorithm. The proposed architecture for multi-view face detection has been designed using Verilog HDL and implemented in a Xilinx Virtex-5 FPGA. Its performance has been measured and compared with a Jones' …

The Production And Filtration Efficiency Testing Of Nonwoven Electrospun Fiber Mats, Jan Uecker

Theses and Dissertations

In this thesis the production and filtration performance of electrospun nylon-4,6 nanofiber mats was experimentally studied. The average fiber diameter of nylon-4,6 fibers is controlled by altering the polymer concentration in solution. Adding small amount of pyridine to the electrospinning solution controlled fiber beading and other defects. These fibers were then deposited onto a wide variety of conductive and dielectric substrate materials. A corona ion source was used to eliminate surface charging effects observed at the surface of all substrates. The resulting fiber mats, uniform in size and distribution as verified by SEM imaging, are tested for filtration efficiency and …

Data Collection Methodology For Dynamic Temperature Model Testing And Corroboration, Bethany T. Neilson, David King Stevens, S. C. Chapra, Christina J. Bandaragoda

Civil and Environmental Engineering Faculty Publications

This article describes a data collection approach for determining the significance of individual heat fluxes within streamswith an emphasis on testing (i.e. identification of possible missing heat fluxes), development, calibration and corroborationof a dynamic temperature model. The basis for developing this approach was a preliminary temperature modelling effort onthe Virgin River in southwestern Utah during a low-flow period that suggested important components of the energy balancemight be missing in the o riginal standard surface-flux temperat ure model. Possible missing heat fluxes were identi fied as bedconduction, hyporheic exchange, dead zone warming and exchange and poor representation of the amount of …

Effect Of Humic Acid On Adsorption Of Polychlorinated Biphenyls Onto Organoclay, Bhawana Sharma, Kevin H. Gardner, Jeffrey S. Melton, Amy Hawkins, Gregory Tracey

Civil & Environmental Engineering

Mitigation of risks stemming from contaminated sediments in freshwater and estuarine environments remains an important challenge to the field of environmental science and engineering. Capping sediments with reactive materials is one approach that has recently been the subject of research and development. This research evaluated the use of organoclay as a sorbent in a reactive cap for in situ remediation of contaminated sediments, and provides an original contribution by presenting the sorption characteristics of individual polychlorinated biphenyls (PCB) congeners in the presence of high concentrations of humic acids typical of sediment porewater environments. Sorption of coplanar and noncoplanar PCBs on …

Fabrication And Characterization Of Bioactive, Composite Electrospun Bone Tissue Engineering Scaffolds Intended For Cleft Palate Repair, Parthasarathy Madurantakam

Theses and Dissertations

Tissue Engineering is a scientific discipline that aims to regenerate tissues and organs that are diseased, lost or congenitally absent. It encompasses the use of suitable synthetic equivalents of native extracellular matrix that may or may not be supplemented with cells or relevant growth factors. Such scaffolds are designed to reside at the site of implantation for a variable period of time during which they induce the regeneration of native tissue. During this time, they also provide a template for new cells to attach, infiltrate, differentiate into appropriate phenotype and eventually restore function of the concerned tissue. Among the factors …

51st Rocky Mountain Conference On Analytical Chemistry

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 51st annual meeting of the Rocky Mountain Conference on Analytical Chemistry, co-endorsed by the Colorado Section of the American Chemical Society and the Society for Applied Spectroscopy. Held in Snowmass, Colorado, July 19-23, 2009.

Non-Gray Phonon Transport Using A Hybrid Bte-Fourier Solver, James Loy, Druv Singh, Jayathi Y. Murthy

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

Non-gray phonon transport solvers based on the Boltzmann transport equation (BTE) are frequently employed to simulate sub-micron thermal transport. Typical solution procedures using sequential solution schemes encounter numerical difficulties because of the large spread in scattering rates. For frequency bands with very low Knudsen numbers, strong coupling between the directional BTEs results in slow convergence for sequential solution procedures. In this paper, we present a hybrid BTE-Fourier model which addresses this issue. By establishing a phonon group cutoff (say Kn=0.1), phonon bands with low Knudsen numbers are solved using a modified Fourier equation which includes a scattering term as well …

Farmer, James E. (Sc 1696), Manuscripts & Folklife Archives

Manuscript Collection Finding Aids

Finding aid only for Manuscripts Small Collection 1696. Paper: "River Transportation in Kentucky" written by James E. Farmer for a Western Kentucky State Teachers College class. He writes about the history and economic benefits of Kentucky's rivers.

Analysis And Design Of Earthquake Relief Virtual Logistic Information System, Chi Chen

World Maritime University Dissertations

No abstract provided.

Modeling Of Subcontinuum Thermal Transport Across Semiconductor-Gas Interfaces, Druv Singh, Xiaohui Guo, Alina Alexeenko, Jayathi Y. Murthy, Timothy Fisher

Birck and NCN Publications

A physically rigorous computational algorithm is developed and applied to calculate subcontinuum thermal transport in structures containing semiconductor-gas interfaces. The solution is based on a finite volume discretization of the Boltzmann equation for gas molecules (in the gas phase) and phonons (in the semiconductor). A partial equilibrium is assumed between gas molecules and phonons at the interface of the two media, and the degree of this equilibrium is determined by the accommodation coefficients of gas molecules and phonons on either side of the interface. Energy balance is imposed to obtain a value of the interface temperature. The classic problem of …

Predictive Archaeological Modeling Using Gis-Based Fuzzy Set Estimation: A Case Study In Woodford County, Kentucky, Philip B. Mink, John Ripy, Keiron Bailey, Ted H. Grossardt

Kentucky Transportation Center Faculty and Researcher Publications

Analytic predictive archaeological models can have great utility for state Departments of Transportation, but it is difficult to model the likelihood of prehistoric settlement using geographical proxy predictor variables because of the complexity of how settlement choices were actually made, and the complex interaction between these variables using GIS. In many cases classic statistical modeling approaches require too much data to be useful. This research reports on a preliminary predictive model that combines Spatial Analyst and fuzzy logic modeling to capture expert archaeological knowledge and convert this into predictive surface. A test area was defined in Woodford County, KY and …

X-Ray Photoemission Analysis Of Chemically Treated Gate Semiconductor Surfaces For Radiation Detector Applications, A. J. Nelson, A. M. Conway, B. W. Sturm, E. M. Behymer, C. E. Reinhardt, R. J. Nikolic, S. A. Payne, G. Pabst, K. C. Mandal

Faculty Publications

No abstract provided.

Discriminating Pulmonary Hypertension Caused By Monocrotaline Toxicity From Chronic Hypoxia By Near-Infrared Spectroscopy And Multivariate Methods Of Analysis, Simon Duri, Robert C. Molthen, Chieu D. Tran

Biomedical Engineering Faculty Research and Publications

A new method has been developed for the determination of tissue pathology caused by chronic hypoxia and monocrotaline toxicity. The method is based on the use of near-infrared (NIR) spectrophotometry to measure spectra of lung tissue from normal chronic hypoxia (CH) and monocrotaline (MCT) models of pulmonary hypertension (PH), followed by analysis using multivariate methods, that is, principal component analysis (PCA) and partial least squares (PLS). Synergistic use of NIR with the PCA/PLS method makes it possible, for the first time, not only to divide different lung tissue samples into their respective groups (normal, CH, and MCT) but also to …

Radiation And Convection Heat Transfer In Wildland Fire Environments, David J. Frankman

Theses and Dissertations

Wildland fire research has been extensive and on going since before 1950. The motivation behind this research is to prevent loss of property and lives. In spite of this research, the heat transfer of fuel ignition and flame spread is not well understood. This dissertation seeks to fill gaps in this understanding through modeling and also by experimentation. The effect of water vapor on the transmission of thermal radiation from the flame to the fuel was investigated. The Spectral Line Weighted-sum-of-gray-gases approach was adopted for treating the spectral nature of the radiation. The study reveals that water vapor has only …

A Methodology For Designing Product Components With Built-In Barriers To Reverse Engineering, Stephen P. Harston

Theses and Dissertations

Reverse engineering, defined as extracting information about a product from the product itself, is a common industry practice for gaining insight into innovative products. Both the original designer and those reverse engineering the original design can benefit from estimating the time and barrier to reverse engineer a product. This thesis presents a set of metrics and parameters that can be used to calculate the barrier to reverse engineer any product as well as the time required to do so. To the original designer, these numerical representations of the barrier and time can be used to strategically identify and improve product …

East Bay Energy Consortium Meeting Minutes, July 13, 2009, East Bay Energy Consortium

East Bay Energy Consortium Meeting Minutes

No abstract provided.

A Method For Making In Situ Emittance Measurements Of Coal Ash Deposits, Travis J. Moore

Theses and Dissertations

A major problem associated with any power generation process in which coal is burned is the formation of ash and slag from the inorganic constituents of the coal. Ash deposition on heat transfer surfaces in coal-fired reactors is unavoidable and can have a significant effect on the performance and maintenance of boilers and gasifiers. A greater understanding of the thermal properties of coal ash deposits is important in reducing their negative impact. This work presents the development of an experimental method for making in situ measurements of the spectral emittance of coal ash deposits. It also provides measured emittances for …

Visualizing And Modeling Mining-Induced Surface Subsidence, Marcor Gibbons Platt

Theses and Dissertations

Ground subsidence due to underground coal mining is a complex, narrowly-understood phenomenon. Due to the complicated physical processes involved and the lack of a complete knowledge of the characteristics of overlying strata, the reliability of current prediction techniques varies widely. Furthermore, the accuracy of any given prediction technique is largely dependent upon the accuracy of field measurements and surveys which provide input data for the technique. A valuable resource available for predicting and modeling subsidence is aerial survey technology. This technology produces yearly datasets with a high density of survey points. The following study introduces a method wherein these survey …

Characterizing Material Property Tradeoffs Of Polycrystalline Diamond For Design Evaluation And Selection, Neil David Haddock

Theses and Dissertations

Polycrystalline diamond (PCD) is used as a cutting tool in many industries because of its superior wear resistance compared to single crystal diamond. Engineers who design new PCD materials must have an understanding of the tradeoffs between material properties in order to tailor a product for different applications. Two competing material properties that are often encountered in PCD are transverse rupture strength and thermal-resistance. Thermal-resistance is directly related to the cobalt content of PCD, and is the ability of the material to withstand thermally induced degradation. In this thesis, we characterize the tradeoff boundary between transverse rupture strength and cobalt …

Squeeze-Film Damping Of Flexible Microcantilevers At Low Ambient Pressures: Theory And Experiment, Jin Lee, Ryan C. Tung, Arvind Raman, Hartono Sumali, John Sullivan

PRISM: NNSA Center for Prediction of Reliability, Integrity and Survivability of Microsystems

An improved theoretical approach is proposed to predict the dynamic behavior of long, slender and flexible microcantilevers affected by squeeze-film damping at low ambient pressures. Our approach extends recent continuum gas damping models (Veijola 2004 J. Micromech. Microeng. 14 1109–18, Gallis and Torczynski 2004 J. Microelectromech. Syst. 13 653–9), which were originally derived for a rigid oscillating plate near a wall, to flexible microcantilevers for calculating and predicting squeeze-film damping ratios of higher order bending modes at reduced ambient pressures. Theoretical frequency response functions are derived for a flexible microcantilever beam excited both inertially and via external forcing. Experiments performed …

Developing Abrasion Test Standards For Evaluating Lunar Construction Materials, Ryan L. Kobrick, David M. Klaus, Kenneth W. Street

Publications

Operational issues encountered by Apollo astronauts relating to lunar dust were catalogued, including material abrasion that resulted in scratches and wear on spacesuit components, ultimately impacting visibility, joint mobility and pressure retention. Standard methods are being developed to measure abrasive wear on candidate construction materials to be used for spacesuits, spacecraft, and robotics. Calibration tests were conducted using a standard diamond stylus scratch tip on the common spacecraft structure aluminum, Al 6061-T6. Custom tips were fabricated from terrestrial counterparts of lunar minerals for scratching Al 6061-T6 and comparing to standard diamond scratches. Considerations are offered for how to apply standards …

Construction Of Large Geo-Referenced Mosaics From Mav Video And Telemetry Data, Benjamin Kurt Heiner

Theses and Dissertations

Miniature Aerial Vehicles (MAVs) are quickly gaining acceptance as a platform for performing remote sensing or surveillance of remote areas. However, because MAVs are typically flown close to the ground (1000 feet or less in altitude), their field of view for any one image is relatively small. In addition, the context of the video (where and at what orientation are the objects being observed, the relationship between images) is unclear from any one image. To overcome these problems, we propose a geo-referenced mosaicing method that creates a mosaic from the captured images and geo-references the mosaic using information from the …

Lamina Emergent Torsion (Let) Joint, Joseph O. Jacobsen, Guimin Chen, Larry L. Howell, Spencer P. Magleby

Faculty Publications

Part of the challenge in designing compliant mechanisms is finding suitable joints that provide the needed motion and force-deflection characteristics. The Lamina Emergent Torsional (LET) Joint is presented as a compliant joint suited for applications where large angular rotation is desired, but high off-axis stiffness is not as critical. The joint is introduced and the equations necessary for determining the force-deflection characteristics are presented. Since the LET Joint can be fabricated from a single planar layer, it is well suited for macro and micro applications. Illustrative examples are provided with devices fabricated from materials as diverse as steel, polypropylene, and …

An Investigation Of Middle School Student Interest, Perception, And Attitude Toward Technology And Engineering, Kari Marie Cook

Theses and Dissertations

The purpose of this study was to investigate middle school student perception and attitude toward technology and engineering and to better understand how the gender of the teacher, gender of the student, and information provided in technology classes affected their perception and attitude. To accomplish this, the Technology Attitude Scale, and the Pupil's Attitudes Toward Technology—United States assessment instruments were used to form the basis of a new survey instrument focused on technology and engineering perception, use, and interest. The new survey instrument is called the Technology and Engineering Attitude Scale (TEAS) survey. Multiple 7th grade technology engineering classes from …

Offset Qpsk In Siso And Mimo Environments, Xiaoyu Dang

Theses and Dissertations

We demonstrate how the performance of offset quadrature phase-shift keying (OQPSK) and its variants of Feher-patented QPSK (FQPSK) and Shaped Offset QPSK (SOQPSK) (collectively known as the ARTM Tier-1 waveforms) in single input single output (SISO) system could change with the channel fading parameters. The bit error rate expression of offset QSPK and ATRM Tier-1 waveforms over the aeronautical telemetry multipath channel has been derived. Simulations show that for the case of a single multipath ray, the BER gets worse with increasing Γ for a fixed delay, and that the BER has a quasi-periodic property for fixed Γ and increasing …