Engineering Commons^™

Middle Terminal Cell Models For Efficient Over-The-Cell Routing, Siddharth Bhingarde

Masters Theses

In this thesis, we introduce a new class of cell models called Middle Terminal Models (MTM) which combines the advantages of existing cell models: BTM and CTM. This class contains the models 2MTM, 3MTM-V, and 3MTM+V depending on the number of metal layers and the permissibility of vias in over-the-cell areas. In MTM, two rows of terminals are located in the middle of the cell. This partitions over-the-cell area into three regions and allows allocation of more nets to over-the-cell area in congested channels. We prove that when vias are allowed over-the-cell, in "almost all" cases the MTM based layouts …

Bs News

Building Services Engineering

No abstract provided.

Navier-Stokes Simulation Of Quasi-Axisymmetric And Three-Dimensional Supersonic Vortex Breakdown, Hamdy A. Kandil

Mechanical & Aerospace Engineering Theses & Dissertations

Computational simulation of supersonic vortex breakdown is considered for internal and external flow applications. The interaction of a supersonic swirling flow with a shock wave in bounded and unbounded domains is studied. The problem is formulated using the unsteady, compressible, full Navier-Stokes equations which are solved using an implicit, flux-difference splitting, finite-volume scheme. Solutions are obtained for quasi-axisymmetric and three-dimensional flows. The quasi-axisymmetric solutions are obtained by forcing the components of the flowfield vector to be equal on two axial planes, which are in close proximity to each other. For the flow in a bounded domain, a supersonic swirling flow …

Effects Of Radiative Interactions In Molecular Gases Under Local And Nonlocal Thermodynamic Equilibrium Conditions, Manoj Kumar Jha

Mechanical & Aerospace Engineering Theses & Dissertations

Basic formulations, analyses, and numerical procedures are presented to investigate radiative heat interactions in diatomic and polyatomic gases under local and nonlocal thermodynamic equilibrium conditions. Essential governing equations are presented for both gray and nongray gases. Information is provided on absorption models, relaxation times, and transfer equations. Radiative flux equations are developed which are applicable under local and nonlocal thermodynamic equilibrium conditions.

The problem is solved for fully developed laminar incompressible flows between two parallel plates under the boundary condition of a uniform surface heat flux. For specific applications, three diatomic and three polyatomic gases are considered. The results are …

An Analysis Of The Response Of A Buckled Beam With Fixed Ends To An Harmonic Base Excitation Using The Finite Element Method, Peter John O'Donoghue

Mechanical & Aerospace Engineering Theses & Dissertations

A finite element formulation is developed to analyze the large deflection vibration of a buckled isotropic beam. The beam is buckled mechanically by an applied end displacement, and the dynamic loading is derived from the forced periodic base motion. The principle of virtual work is used to derive the system equations of motion. A Newton-Raphson iteration routine modified for the case of an applied end displacement is used with the incremental equations of motion to determine static deflection. The 0l time numerical integration algorithm is applied to the system of equations of motion in physical coordinates to determine dynamic response …

Cross-Cultural Issues In The Management Of German-Owned Business Subsidiaries In Hampton Roads, Teja Ulrich

Engineering Management & Systems Engineering Theses & Dissertations

'Culture' can be described as patterns of thinking, feeling and acting that distinguish one cultural group from another. Cultural diversity is therefore likely to introduce variety to organizations in which individuals from different national backgrounds are working together. Although this variety bears the potential for an improvement of the cognitive development in the organizations, managers of multicultural business organizations tend to perceive cultural diversity as a disadvantage. This thesis attempts to identify the impact of cultural differences between Germans and Americans on organizations in which German managers work with American employees. German managers of eight business subsidiaries in the Hampton …

Acoustical Boundary Location Through Texture Analysis Of Multibeam Bathymetric Sonar Data, Herb Barad, Andrews B. Martinez, Brian S. Bourgeois, Edit J. Kaminsky

Electrical Engineering Faculty Publications

Texture analysis is performed on multibeam sonar signal returns discriminated angularity by beamforming. A collection of fourteen texture features are computed via co-occurrence matrices and data reduction is then performed using a principal components transformation. Acoustical boundaries (boundaries between regions with homogeneous acoustical properties) are evident from the features. Results indicate that seafloor bottom characteristics can be extracted from these texture features.

Robust Control Of Nonlinear Multibody Flexible Space Structures, Atul G. Kelkar

Mechanical & Aerospace Engineering Theses & Dissertations

A generic nonlinear math model of a multibody flexible system is developed. Asymptotic stability of such systems using dissipative compensators is established. It is proved that, under certain conditions, this class of systems exhibit global asymptotic stability under dissipative compensation. The dissipative compensators considered are static as well as dynamic dissipative compensators. The stability proofs are based on passivity approaches, Lyapunov methods, as well as a key property of such systems, i.e., skew-symmetricity of certain matrix. The importance of the stability results obtained is that the stability is robust to parametric uncertainties and modeling errors.

For static dissipative compensators, it …

A Sociotechnical Approach To The Study Of Semiautonomous Work Group Communication In Technical Organizations, Elizabeth B. Varnes

Engineering Management & Systems Engineering Theses & Dissertations

The sociotechnical aspects of group communication in semiautonomous technical work teams were investigated to understand how team members define "effective" group communication and what impact technical tools have on the group communication process. A team of workers with various technical backgrounds was selected for study. The study involved videotaped group sessions, a group training educational briefing and individual group member questionnaires. The results indicate that group members believed sharing information among group members was critical to successful communication and that certain technical tools could be effective during group meetings. The findings are congruent with the general theory that group communication …

Elasto-Plastic Analysis Of Buried Pipelines Subjected To The Large Fault Movement, Luo-Jia Wang

Civil & Environmental Engineering Theses & Dissertations

The responses of buried pipelines subjected to a large fault movement are examined based upon a new non-linear cantilever beam analogy. This analogy assumes that the pipeline in the large deformation zone behaves like a cantilever beam subjected to a transversely concentrated shear at the inflection point and a uniformly distributed soil pressure along the entire span. Tangent modulus approach is adopted to analyze the coupled axial force-bending moment interaction effect on pipeline deformation in the inelastic range. Parametric studies of both tensile and compressive responses of buried pipeline to various fault movements, crossing angles, buried depths, pipe diameters and …

Evaluation Of Yba,Cu,O,_, Bulk Superconductors For High Field Magnet Applications, K. Y. Blohowiak, D. F. Garrigus, T. S. Luhman, K. E. Mccrary, M. Strasik, I. A. Aksay, Fatih Dogan, W. B. Hicks, J. Liu, M. Sarikaya

Materials Science and Engineering Faculty Research & Creative Works

Processing of YBCO single crystals was carried out by solidification of semi-liquid YBCO composition using a seeding technique. Microstructural characterization of the pinning centers was investigated by transmission electron microscopy. Characterization of single crystals was carried out, relating grain size and shape to the corresponding flux profiles. Current densities were calculated based on measured trapped fields. Once circulating currents were established, flux pumping and quenching experiments were conducted. These large single crystals will be incorporated into electromagnetic forming devices for use in the military and commercial aircraft manufacturing and service industries.

Evaluation Of Yba2cu3o7-X Bulk Superconductors For High Field Magnet Applications, K. Y. Blohowiak, D. F. Garrigus, T. S. Luhman, K. E. Mccrary, M. Strasik, Ilhan A. Aksay, Fatih Dogan, W. B. Hicks, J. Liu, M. Sarikaya

Materials Science and Engineering Faculty Research & Creative Works

Processing of YBCO single crystals was carried out by solidification of semi-liquid YBCO composition using a seeding technique. Microstructural characterization of the pinning centers was investigated by transmission electron microscopy. Characterization of single crystals was carried out, relating grain size and shape to the corresponding flux profiles. Current densities were calculated based on measured trapped fields. Once circulating currents were established, flux pumping and quenching experiments were conducted. These large single crystals will be incorporated into electromagnetic forming devices for use in the military and commercial aircraft manufacturing and service industries.

Monolithic Silicon Opto-Electro-Mechanical Light Modulator, Ching-Horng Wu

Theses

A Fabry-Perot light beam modulator of the reflection-type has been designed with process and performance parameters optimized. This design takes advantage of the economies of surface micromaching using silicon substrates and selected thin films. High performance with a low drive voltage are achieved using electrostatic actuation of a thin polysilicon diaphragm. The diaphragm is a novel corrugated structure which has maximum compliance and maintains planarity during actuation. In addition, the corrugationsuspension used provides an improved linearity of amplitude modulation response as a function of the actuation voltage.

A preliminary version of this device has been fabricated through a contract foundry …

A Systolic Simulation And Transformation System, Ronald I. Greenberg, H.-C. Oh

Computer Science: Faculty Publications and Other Works

This paper presents a CAD tool, SystSim, to ease the design of systolic systems. Given a high-level, functional description of processors, and a high-level description of their interconnection, SystSim will perform simulations and provide graphical output. SystSim will also perform transformations such as retiming, which eases use of the methodology of Leiserson and Saxe of designing a system with broadcasting and then obtaining a systolic system through retiming.

Fiber Optic Sensor For The Simultaneous Detection Of Strain And Temperature, Barry G. Grossman, Walid Emil Costandi

Electrical Engineering and Computer Science Faculty Publications

For simple interferometric fiberoptic sensors, the effects of strain and temperature are indistinguishable. This paper addresses that problem by demonstrating a single wavelength, two-mode polarimetric fiberoptic sensor capable of simultaneously measuring temperature and strain. The sensor consists of two interferometers, a polarimetric and a two-mode, formed in a single elliptical core fiber. The interferometers respond with different sensitivities to strain and temperature like simultaneous functions of the two variables. A technique is developed by which the outputs of the interferometers are used simultaneously to measure strain and temperature with rms errors less than 30 με and 1°C. Finally, measurement results …

Structural Materials From Recycled High Density Polyethylene And Herbaceous Fibers, And Method For Production, Barton L. Bergquist, Mohammed F. Fahmy

Patents (University of Northern Iowa)

A composite useful for structural components comprised of recycled high density polyethylene and herbaceous fibrous materials and a method to produce composites based on recycled high density polyethylene and chopped herbaceous fibers. An alternative structural composite is disclosed which is comprised of recycled low density polyethylene and chopped herbaceous fibrous material.

Rate Equations From The Keldysh Formalism Applied To The Phonon Peak In Resonant-Tunneling Diodes, Roger Lake, Gerhard Klimeck, Supriyo Datta

Birck and NCN Publications

Starting from the Keldysh formalism, general analytical expressions are derived for the current and the occupation of the well in the presence of inelastic scattering, both at the main peak and at the pho- non peak. These expressions are then evaluated from a continuous coordinate representation of a double-barrier potential profile and also from a tight-binding model of a weakly coupled central site. The resulting expressions are similar, and the analytical expressions derived from the continuous coordi- nate representation compare well with the results obtained from numerical simulations. The analytical expressions and the numerical results show that unlike the main …

Analysis Of Weighted Fan-Out/Fan-In Volume Holographic Interconnections, Gregory P. Nordin, P. Asthana, B. Keith Jenkins, A. R. Tanguay

Faculty Publications

The feasibility of employing volume holographic techniques for the implementation of highly multiplexed weighted fan-out/fan-in interconnections is analyzed on the basis of interconnection fidelity, optical throughput, and complexity of recording schedule or implementation hardware. These feasibility criteria were quantitatively evaluated using the optical beam propagation method to numerically simulate the diffraction characteristics of volume holographic interconnections recorded in a linear holographic material. We find that conventional interconnection architectures (that are based on a single coherent optical source) exhibit a direct trade-off between interconnection fidelity and optical throughput on the one hand, and recording schedule or hardware complexity on the other. …

Bs News

Building Services Engineering

No abstract provided.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 9, Number 3, March 1993, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A twelve page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Acuta Enews March 1992, Vol. 21, No. 3

ACUTA Newsletters

In This Issue

OSP violators fined

President's column

Non-dominant carriers face tariffs

Resource Manager joins staff

Numerical Prediction Of Transition Of The F-16 Wing At Supersonic Speeds, Russell M. Cummings

Aerospace Engineering

No abstract provided.

Acuta Enews March 1993, Vol. 22, No. 3

ACUTA Newsletters

In This Issue

CUPA Salary Survey page 2

Presidents Message page 3

Tampa Review: Voice Processing at lU page 4

Tampa Review: Auto Attendants page 7

PBX Toll Fraud Prevention Checklist page 8

Markey Addresses Communications infrastructure page 9

Tampa Review: Voice Processing Partnerships page 10

Executive Director's Message page 11

Terrain Classification In Sar Images Using Principal Components Analysis And Neural Networks, Mahmood R. Azimi-Sadjadi, Saleem Ghaloum, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

The development of a neural network-based classifier for classifying three distinct scenes (urban, park and water) from several polarized SAR images of San Francisco Bay area is discussed. The principal component (PC) scheme or Karhunen-Loeve (KL) transform is used to extract the salient features of the input data, and to reduce the dimensionality of the feature space prior to the application to the neural networks. Employing PC scheme along with polarized images used in this study, led to substantial improvements in the classification rates when compared with previous studies. When a combined polarization architecture is used the classification rate for …

Luminescence Study Of Ion-Implanted And Mbe-Grown Er-Doped Gaas And AlXGa1-XAs, Jose E. Colon

Theses and Dissertations

The excitation and de-excitation mechanisms of the 1.54 microns emissions, from ion implanted and MBE grown GaAs:Er and Al_xGa_1-xAs:Er, were studied through luminescence experiments. Experimental techniques included photoluminescence, time resolved photoluminescence, and selective excitation photoluminescence. The Er³⁺ emissions were studied as a function of Er concentration, aluminum mole friction, n- and p-type doping level, and annealing temperature. In addition oxygen co-doping studies were done in order to determine the role played by oxygen in the Er³⁺ luminescence.

Self-Referenced Speckle Holography (Srsh) Image Reconstruction Performance, John R. Devey

Theses and Dissertations

The Speckle Holography technique uses a series of short exposure images and associated wave front sensor measurements to reconstruct astronomical images. The reconstruction technique effectively boosts the amplitude of high spatial frequencies to allow for finer resolution of astronomical objects. A simulation package that calculates the optical transfer function (OTF) of a telescopic system was previously developed for the Phillips Laboratory. This software was modified slightly to provide the Speckle Holography system transfer function (STF) for a telescopic system under varying seeing conditions.

Frequency Domain Speech Compression Using The Karhunen-Loeve Transform, Donald W. Dryley

Theses and Dissertations

The purpose of this study was test the influence of phase on the quality of speech reproduced by a speaker dependent compression system. The tests consisted of compressing frequency domain speech vectors using the Karhunen-Loeve Transform, with and without phase, then making subjective judgements as to the reproduced quality. Error Metrics were then tested for their suitability as predictors of reproduced quality. The compression software transformed each speech vector into a vector of complex Fourier coefficients (only half of the coefficients are needed as transform is hermitian). Phase was preserved by using the real frequency components to form one vector …

Mitigation Of Shock Waves In A Cylindrical Tunnel By Foam, Grant W. Fondaw

Theses and Dissertations

This study investigated the effectiveness of foam linings in mitigating shock waves in tunnels. A polyurethane foam liner of varying density, crush strength and thickness was modeled inside a 1 meter radius tunnel and an explosion of 1.25 kg of plastic explosive was simulated. Using CTH, an Eulerian- Lagrangian hydrodynamics code from Sandia National Laboratories, the overpressures were computed and compared graphically to determine the effect of varying each foam parameter. The walls of the tunnel consisted of a perfectly reflecting boundary, and in some cases, a foam liner. Low density foam provided the most shock attenuation. with a 20 …

Amplification Of Shock Overpressure By Reflection Within Concave Corners, John E. Loftis

Theses and Dissertations

In this study, CTH, a production hydrodynamics code developed and provided by Sandia National Laboratories. modeled the interaction of a shock wave with tall V-shaped buildings with various wall lengths and vertex angles. The purpose of this study was to determine the degree to which the length and vertex angle affect the peak overpressure at the vertex. CTH performed two- dimensional Eulerian-Lagrangian computations to obtain solutions of this problem. The models were cast in two-dimensional rectangular geometry on a horizontal plane because of the computational costs of three-dimensional calculations. This geometry simulates tall buildings exposed to a tall Mach stem …

Identification Of Significant Outliers In Time Series Data, Keri L. Robinson

Theses and Dissertations

This thesis examines the feasibility of using least median of squares (LMS) procedure applied to a reweighted least squares (RLS) autoregression model to identify significant outliers in time series data. The time series were analyzed for data points that were outliers. In order to perform detailed analysis on an outlier. the analyst must be able to determine that an outlier data point is significantly different from normally distributed data. This thesis examines a new method for identifying these outliers. Data from the field were characterized and fit with time series models using an autoregressive reweighted least squares routine (ARRLS) derived …