Engineering Commons^™

Deposition Of Particles In A Convergent Channel, Hsi-Chung Chiou

Dissertations

The deposition of suspensions for uniform flow in convergent channels under the combined influences of inertia, viscous, gravity and electrostatic image forces were studied theoretically. A two dimensional, steady, incompressible, laminar flow with uniform velocity profile was assumed.

It was found that when the ratio of charge parameter to gravity parameter, Q/G, is greater than 5, the deposition is dominated by the electrostatic image force alone and that the gravity effect can be neglected. When the ratio of charge parameter to gravity parameter, Q/G, is less than 0.001, the image force can then be neglected. It was also observed that …

Engineering Design Of An Anaerobic-Aerobic System To Treat Chlorophenols, Chih-Ju Jou

Dissertations

The present work was aimed at determining the effect of the main operating parameters on the performance of an anaerobic-aerobic reactor system to degrade toxic chlorinated compounds. In previous work conducted in the Biological Treatment Lab at NJIT it was shown that this system is capable of achieving the complete degradation of chlorophenols. In that system, reductive dehalogenation took place in the first anaerobic reactor, which was followed by a second aerobic reactor in which the degradation products of the first reactor were mineralized. In the present work the role of a number of parameters that can have a significant …

Pyrolysis And Oxidation Of Chloromethanes Experiment And Modeling, Wenpin Ho

Dissertations

An experimental study on pyrolysis and oxidation of CH₂Cl₂ and CH₃Cl in oxygen/hydrogen or oxygen/methane mixtures and argon bath gas was carried out at 1 atmosphere pressure in tubular flow reactors. Degradation of CH₂Cl₂, or CH₃CI, along with the formation and destruction of intermediate and final products was analyzed systematically over 873 to 1273°K, with average residence times of 0.2 to 2.0 seconds.

Thermochemical parameters: enthalpy, entropy, and heat capacities for many chloro-oxy-carbon products and intermediates are calculated using the techniques of group additivity and the THERM computer code. …

On Generalized Adaptive Neural Filter, Zhiqiang Zhang

Dissertations

Linear filters have historically been used in the past as the most useful tools for suppressing noise in signal processing. It has been shown that the optimal filter which minimizes the mean square error (MSE) between the filter output and the desired output is a linear filter provided that the noise is additive white Gaussian noise (AWGN). However, in most signal processing applications, the noise in the channel through which a signal is transmitted is not AWGN; it is not stationary, and it may have unknown characteristics.

To overcome the shortcomings of linear filters, nonlinear filters ranging from the median …

Statistical, Random And Fractal Characterizations Of Surface Topography With Engineering Applications, Gongyao Zhou

Dissertations

Two methods, namely the conventional and fractal geometry methods, are developed for surface topography characterization. The conventional method utilizing statistical and random process techniques is used to study waterjet machined surfaces. In the study the waterjet surfaces are separated into smooth and striation zones, where striation influence is negligible in the smooth zone. It is found that the smooth zone has a random, moderately isotropic texture, with the height distribution nearly Gaussian. In the striation zone the major frequencies of the surface profile power spectra are independent of cutting parameters, while the amplitudes of these frequencies monotonically increase with cutting …

Constitutive Equation For Concrete Using Strain-Space Plasticity Model, Yuxiang Xing

Dissertations

Plasticity theory has been used to model the concrete constitutive relationship for about two decades. With the modifications and refinement based on experimental data, achievement has been made in these plasticity models for concrete. Almost all the existing models are developed in stress space. With a lot of experimental data and more understanding about stress states of concrete, the stress-space model shows many advantages. Because of this and also due to conventional engineering practice, the stress-space plasticity approach has been in the dominant position. However, the conventional stress-space plasticity method has one inherent drawback in which it cannot deal with …

On Orthogonal Collocation Solutions Of Partial Differential Equations, Herli Surjanhata

Dissertations

In contrast to the h-version most frequently used, a p-version of the Orthogonal Collocation Method as applied to differential equations in two-dimensional domains is examined. For superior accuracy and convergence, the collocation points are chosen to be the zeros of a Legendre polynomial plus the two endpoints. Hence the method is called the Legendre Collocation Method. The approximate solution in an element is written as a Lagrange interpolation polynomial. This form of the approximate solution makes it possible to fully automate the method on a personal computer using conventional memory.

The Legendre Collocation Method provides a formula for …

Minimum Redundancy Array Structure For Interference Cancellation, Wan-Ling Chen

Dissertations

Adaptive antenna arrays are widely used in many advanced radar, sonar, and communication systems because of their effectiveness in cancelling intentional or unintentional interferers. A uniformly spaced linear array, referred to as a Uniform Regular Array (URA), is the usual structure used for interference cancellation. The Minimum Redundancy Array (MRA) structure proposed in this work is a special kind of thinned array whose application was limited in the past to direction finding. MRAs with the same number of array elements can resolve directions of much more closely spaced signals than URAs.

The URA structure is customarily utilized for interference cancellation, …

Tensile Behavior Of Concrete And Mortar Under Direct Impact Tensile Load, Kayumars Emad

Dissertations

Structures are often subjected to impact loadings during their lifetime. Most structural specifications including the special provisions for seismic design in the current ACI building codes, have been developed on the basis of quasi-static assumptions. Cement composites are strain rate sensitive materials therefore, their properties determined under quasi-static condition should not be used to predict their performance under high strain rates.

The objectives of this investigation are:

• to develop a standard test set-up for direct tensile testing of cementitious composites.
• to study the tensile behavior of mortar and concrete under direct impact tensile load.
• to develop a simplified formula to …

Characterization Of Advanced Etching Reactors Using Novel Diagnostic Tools, Vipulkumar Patel

Dissertations

Plasma etching equipment used for sub-micron integrated circuit fabrication at present are exclusively based on 13.56 MHz, capacitively coupled, parallel-plate geometry. The underlying mechanisms of plasma processes in these reactors are not well understood and there is even less understanding of how the etch-tool parameters relate to the plasma discharge characteristics which actually determine the etch process. In this thesis, new diagnostic techniques were applied for the characterization and optimization of plasma etching processes in various reactor configurations.

Specifically, diode and triode configurations were studied extensively using tuned scanning Langmuir probes. Both radial and axial distributions of plasma density were …

Kinetic Study Of Decomposition Of Azo Dyes And Phenol In Advanced Oxidation Processes Reaction Mechanisms, Pathways And Intermediates, Hung-Yee Shu

Dissertations

Advanced Oxidation Processes (AOP) are an emerging technology for treatment of various hazardous organics in wastewater and groundwater. However, the kinetics and mechanisms for AOP have not been well understood. A mechanism including light intensity was studied for the decomposition of azo dyes and phenol in an AOP reactor with a 5,000 watt low pressure mercury lamp. UV light absorption is an important parameter. The effect of pH, hydrogen peroxide dosage, and dye concentration on the decomposition of azo dyes in an H₂O₂/UV reactor were also studied. Reaction pathways and intermediates of phenol oxidation by different …

Unreinforced Masonry Structures : Nonlinear Analysis And Evaluation Of Some Rehab Schemes, Sanjay Mehta

Dissertations

Unreinforced masonry (URM) structures have been a common type of construction in the past and are still used in regions of low seismicity. Retrofitting of these structures is necessary because of two reasons: Firstly, observed damage after earthquakes reveals that URM construction is one of the most hazardous constructions even in the region of low seismicity; secondly, reclassification of seismic zones would require retrofitting of existing structures to comply with new guidelines for earthquake design.

Retrofitting measures require that the response of original and new structural systems as well as their interaction be considered. It is therefore important to correctly …

Utilization Of Fly Ash In Concrete, Chai Jaturapitakkul

Dissertations

Fly ash, a by-product of coal burning power plants, is produced in large quantities each year. It is commonly known that fly ash possesses pozzolanic behavior which can enhance the properties of concrete. Due to a lack of proper understanding on the formation of fly ash and its performance in concrete, the question of quality assurance has frequently been a major concern of engineers using fly ash in their construction projects. As a result, much fly ash is disposed of as waste material in landfills. Recent environmental concerns and a shortage of landfill space have rapidly escalated the disposal cost …

Competition Between Two Microbial Populations In A Sequencing Fed-Batch Reactor And Its Implications For Waste Treatment Applications, Sitaram Dikshitulu

Dissertations

Pure and simple competition between two microbial populations in a sequencing fed-batch reactor (SFBR) was studied both at the theoretical and experimental level. Competition occurred for a single chemical pollutant which could serve as the sole carbon and energy source for both competitors. A mathematical model describing the process under inhibitory kinetics (as is usually the case with hazardous and toxic substances) was derived and theoretically analyzed. The model predicts that the dynamics of a SFBR, and the kinetics of biodegradation, result in a complex set of operating regimes in which neither species, only one species, or both species survive …

Analysis Of The Optimum Extraction System Design For The Separation And Purification Of Rare Earths, Kenneth Yeon-Kang Chan

Dissertations

A mathematical model for the liquid-liquid equilibrium of the lanthanide and yttrium oxides in the nitric acid - water - tributyl phosphate (HNO₃-H₂O-TBP) two-phase system has been developed. This model is based on the interrelationships of chemical reactions, phase equilibrium, and material balance. The chemical reactions were modelled using experimentally derived empirical equations for components involved. The distribution coefficients of 16 rare earths which were experimentally determined. by UK Harwell Laboratory were used to evaluate the parameters of this equilibrium model. Once model parameters are determined, material balance for all species in the HNO₃-H …

Analysis Of A Band-Saw, Suat Ali Ozsoylu

Dissertations

The solution for the transverse oscillations of a band-saw is determined. Two different models are treated: a fourth-order model and a second-order model. The response characteristics for both models are determined using Laplace transformation. To obtain the inverse Laplace Transform for the fourth-order model, it was necessary to fmd the frequencies by applying the Extended Lanczos Method in order to overcome the problem for computer overflow.

The limits of stability for both models are studied by plotting the eigenvalues against changing parameter values. Conditions for the onset of divergence and flutter instabilities, which need to be taken into account in …

Kinematic Synthesis Of Adjustable Four-Bar Mechanisms For Multi-Phase Motion Generation, Shao Jie Wang

Dissertations

A four-bar linkage can satisfy up to five prescribed positions for the motion generation problem. The adjustable four-bar linkage, on the other hand, can satisfy more than five given positions by making some of the parameters adjustable.

Limited work had been done in the area of motion generation problems of kinematic synthesis of adjustable four-bar linkages until Wilhelm introduced the concept of multiple adjustments.

This study considers for the first time, the adjustment of a moving pivot, and the problems of three phases of motion. Various combinations of the number of prescribed positions for the motion generation problems are solved …

Study Of Surface Properties Produced By Magneto-Plasma On Nitriding For Improving Wear Resistance, I-Tsung Shih

Dissertations

In this work a newly developed surface treatment process, Magneto-Plasma Ion Nitriding process, was developed and studied. This process was developed to increase durability and wear resistance of operational surfaces of different machine components.

In this study, orthogonal experimental analysis was used to develop, optimize, and select the process parameters. Coating layers were characterized and studied by using scanning electron microscopy(SEM), Auger electron spectroscopy(AES), and image analysis system. The influence of different process treatment parameters, such as temperature, nitrogen concentration, and magnetization, on the layers properties was studied. The mechanism of layer formation and bonding was proposed and a mathematical …

Investigation Of The Striation Formation In The Course Of Abrasive Waterjet Cutting, Jo-Fei Chao

Dissertations

The principal defect of the surfaces generated by abrasive waterjet machining is excessive waviness (striation). The existing theories of striation formation are not adequate to explain this phenomenon. The presented study is concerned with the development of an understanding of the mechanism of striation formation.

A spectral analysis of temporal process and spatial surface characteristics demonstrated that the striation is caused by nozzle vibration that is due to the conditions of the motion control of the nozzle. This enabled us to discover a means for improving the surface finish. From a study of the surface spectra, it was found that …

Investigation Of The Consumer Electronics Bus, Jaesoo Yang

Dissertations

The objectives of this dissertation are to investigate the performance of the Consumer Electronics Bus (CEBus) and to develop a theoretical formulation of the Carrier Sense Multiple Access with Contention Detection and Contention Resolution (CSMA/CDCR) with three priority classes protocol utilized by the CEBus

A new priority channel assigned multiple access with embedded priority resolution (PAMA/PR) theoretical model is formulated. It incorporates the main features of the CEBus with three priority classes. The analytical results for throughput and delay obtained by this formulation were compared to simulation experiments. A close agreement has been found thus validated both theory and simulation …

On Adaptive Censored Cfar Detection, Loizos Anastasiou Prastitis

Dissertations

In an automatic radar detection system the received signal in every range resolution cell is compared with a threshold to test for the presence of a target. A Neyman-Pearson type test is used which maximizes the probability of detection for a fixed probability of false alarm. For the simple case where the noise is homogeneous a fixed threshold is chosen to achieve the designed constant false alarm rate (CFAR). In the more realistic case the noise background is non-stationary due to clutter and interference. In this situation, the threshold used for testing a particular cell is usually set adaptively using …

Investigation Of Reactor Design Parameters Towards Optimizing Biodegradation Of Chlorophenols By Phanerochaete Chrysosporium, Nirupam Pal

Dissertations

The biodegradation of 2,4,6-trichlorophenol (246-TCP) and 2,4,5-trichiorophenol (245-TCP) by Phanerochaete chrysosporium was studied in batch and in continuous systems. Contrary to most of the previous reports from the literature, this study shows that degradation of both TCPs can occur in the absence of any measurable ligninase activity. The microorganism did not retain its degradative ability for more than about two weeks

In order to better understand the degradation process, the individual contributions of both the biomass and the extracellular proteins were studied separately. The results show that neither the biomass nor the extracellular proteins alone can completely degrade 246-TCP, but …