Engineering Commons^™

An Efficient Guaranteed Bandwidth And Balancing Mechanism For High Speed Mans, Venediktos Hadjisavvas

Theses

The Distributed Queue Dual Bus (DQDB) has become the IEEE 802.6 stan-dard for Metropolitan Area Networks (MANs). The main advantage of DQDB is that its throughput performance is not affected by the network parameters such as size, number of connected stations, or channel bandwidth. Its main drawback is that the location of the stations on the bus strongly affects their performance. For this reason a Bandwidth Balancing Mechanism (BBM_DQDB) has been proposed and included in the 802.6 standard that can provide the requested bandwidth by the lightly loaded stations and evenly distribute the remaining bandwidth among the overloaded stations. The …

Model Parameter Identification Of The Oscillatory Potential In The Electroretinogram, Sung Hoon Jang

Theses

A mathematical model of the oscillatory potential which may be a useful clinical tool to diagnose the progression of diabetic retinopathy. The model has been investigated by compressing from oscillatory potential into three parameters which contain most of the information for the oscillatory potential data.

About thirty subjects including both normal and diabetic subjects were investigated in this study. Comparing normal and diabetic subjects, we found amplitude parameter was most important factor to classify subjects by normal and diabetic.

Since modeling of the oscillatory potential and the estimation of the model parameters were our final goal, we haven't proposed to …

Object Oriented Design Of Petri Net Simulator, Himanshu Juneja

Theses

Petri nets are highly useful for modeling discrete event dynamic systems. The objective of this effort is to develop a tool for drawing, editing and simulating Petri nets using object oriented programming on a standard platform. The object oriented approach was chosen because of its code reuse and extendability features which simplify the task of adding features to the tool as the model evolves. The design stresses on modeling of the problem by objects which closely relate the system design with the implementation.

C++ is used for implementing the object oriented design, and the XView toolkit is used for building …

The Development Of A Senior Unit Operations Laboratory On The Supercritical Extraction Of Solid Naphthalene With Supercritical Carbon Dioxide, Ronald G. Gabbard

Theses

A Senior level Undergraduate Unit Operations Laboratory experiment was developed for the extraction of Naphthalene with supercritical Carbon Dioxide. A Supercritical Extraction Screening System purchased from Autoclave Engineers of Erie, Pennsylvania was modified slightly for use as the laboratory equipment. The experiment consists of extracting solid naphthalene from a sand bed in a fixed bed extractor and determining the mass transfer coefficient for the unit.

The lab has been designed to allow the students to develop their own experimental plan without much direct input. The experimental outline provided for the students primarily focuses on information needed for safe and proper …

Simplification Of The Generalized Adaptive Neural Filter And Comparative Studies With Other Nonlinear Filters, Henry Steven Hanek

Theses

Recently, a new class of adaptive filters called Generalized Adaptive Neural Filters (GANFs) has emerged. They share many characteristics in common with stack filters, include all stack filters as a subset. The GANFs allow a very efficient hardware implementation once they are trained. However, there are some problems associated with GANFs. Three of these arc slow training speeds and the difficulty in choosing a filter structure and neural operator.

This thesis begins with a tutorial on filtering and traces the GANF development up through its origin -- the stack filter. After the GANF is covered in reasonable depth, its use …

Processing And Application Of Polyolefin Plastics, Muhammad Khalid

Theses

This thesis describes the manufacturing, processing and application of polyolefin thermoplastics. Polyolefins have become one of the most important kinds of plastics. Polyolefin resin represents about one third of all plastics sold and its application for films and containers dominate the packaging industry. The objective of this thesis is to present the various processing methods and application of polyolefin thermoplastics. Polyolefin is produced by several different processes. Conventional low density polyethylene is made by polymerizing ethylene at high pressure and high temperatures while high density polyethylene is polymerized at relatively low pressure and low temperatures. Generally all polyolefin possess excellent …

Development Of An Intelligent Geometry Measurement Procedure For Coordinate Measuring Machines, Tae-Sung Kim

Theses

A Coordinate Measuring Machines (CMM) is a highly accurate electronic scale for the automatic measurement of 2 and 3 dimensional geometries. In a typical operation the CMM measures a set of user defined points, and then utilizes some internal logic to ascertain whether the inspected part meets the specifications. CMMs have received widespread acceptance among the manufacturing community, and in many instances are required as per supplier contract. Applications of CMMs vary from the measurement of simple 2D parts to complex 3D spatial frames (as for example in their use to measure the integrity of automobile frames). The primary objective …

Vibratory Size Segregation Of Particulate Matter, Anthony La Rosa

Theses

Size segregation imposed by vibration or shaking is an ubiquitous phenomenon whereby a large particle will rise to the top of a bed of smaller spheres upon vibration. Several mechanisms based on computer simulations have been proposed, however a complete theory remains elusive. The objective of this study was to perform experiments to study vibratory segregation of particles for varying size ratios and vibration parameters. More specifically, the rise time of a sphere from the bottom to the top of a vibrated bed was examined. It was found that the rise time decreased with an increase in amplitude for fixed …

Local Stress Factors Of Pipe-Nozzle Due To Radial Load, Circumferential And Longitudinal Moments, Junyu Lin

Theses

This thesis presents a series of stress factor data which provide more detailed information for the calculation of local stresses at the nozzle region, as well as the pipe region, of a pipe-nozzle intersection, subjected to an external radial load, circumferential bending moment, and longitudinal bending moment, respectively.

The pipe and nozzle thicknesses are assumed to be identical. Numerical solutions are obtained through the use of the finite element method. In obtaining the numerical solutions via ANSYS, the quadrilateral element is used to simulate the thin shell pipe-nozzle geometries. The local stresses, at eight different points on both the pipe …

Investigation Of The Pl Cebus Performance With And Without Acknowledgment, Menghan Pan

Theses

The power line implementation of the consumer electronic bus (PL CEBUS) is a promising and inexpensive approach for home automation. Since the intro¬duction of the PL CEBUS standards, there has been increasing efforts on evaluating its performance. However, all the works have been performed for unacknowledged networks. This thesis presents the first successful evaluation of the PL CEBUS with acknowledment. Three different cases, namely, 600, 300 and 100 bits packet sizes, have been considered. The evaluation included the simulation of performance parameters such as message and packet delays, message throughput, and channel throughput. Acknowledged network performance has been confirmed to …

Radiation From A Tapered Dielectric Rod Antenna, Anil Prabhakar

Theses

The radiation fields from a cylindrical dielectric taper is studied. The numerical results of a theoretical model for a taper excited by the dominant HEn mode is compared with experimental measurements. A theoretical mode] for the next propa¬gating mode in the structure. the TE01 mode. is investigated and numerical results based on this proposed model are generated. The theoretical models are based upon the combination of the exact modal field solutions for a step profile cylindrical dielectric rod waveguide. local mode Hum-T. and the equivalence principle for the determination of equivalent current densities.

The far-zone radiation field is considered to …

An Application Of Neural Networks To Statistical Process Control, Asterios Papaikonomou

Theses

Recent changes in the past World War II economy have produced a more educated, value driven customer. A global economy has emerged to technological advances which has made competition fierce as well as proximate. As a result, manufacturing companies are required to provide consumers with quality products at a reasonable cost. A quality product is defined as one that fulfills the needs and expectations of the consumer and provides him with a sense of value.

Since all companies want to provide quality products, the reason why poor quality is sometimes the result is not the outcome of actions for that …

Optimization Of Flow In The Collecting Duct During The Concentrating Mode And The Diluting Mode In A Nephron Population Of Two Different Length With The Renin Angiotensin System And Adh Mechanism, Sivakumar Subramanian

Theses

Our present study is to find out how the short and long nephrons are interacting in the human kidney to adjust the flow in the collecting duct to have the maximum flow during the diluting mode and minimum flow during the concentrating mode. The best lengths for the short nephron and long nephron are calculated during the concentrating mode and the diluting mode by using the Newton-Raphson method. If one wants the kidney to perform only the above mentioned functions, a design criteria for an artificial kidney has been proposed. These studies have provided qualitative information regarding the concentrating mechanism …

Linear Ccd Motion Detection System, Thekepat J. Sudesh

Theses

The mechanical response to electrical stimuli of the human membrane represents an important area of research in medicine. A linear sensing system was designed and fabricated to measure the displacements (along a specified direction) and the frequency response of a ear membrane, the Outer Hair Cell (OHC). The output of this system was a voltage proportional to the instantaneous position of the bimorph and could be displayed on an oscilloscope.

The system consisted of optics to project the image of the vibrating membrane onto a Linear CCD Camera and electronic analog and digital circuitry which produced an instantaneous voltage proportional …

Design Of Mask For Striped Filters And Thin-Film Multi-Layer Emissivity Modeling For Multi-Wavelength Imaging Pyrometer, Jitesh Navinchandra Shah

Theses

Multi-Wavelength Imaging Pyrometry (M-WIP) measures thermal radiation of any target (color or gray) in multiple narrow-spectral-regions and can simultaneously determine target temperature and emissivity. One approach for measuring radiation at multiple wavelengths using a 320X244 element Pt-Si SBD infrared camera is to use narrow-band striped filters deposited on a transparent substrate with proper alignment. The major focus of this thesis was the design of a four layer mask for investigating the feasibility of defining three-wavelength striped filters compatible with focal plane array. This mask design allows twelve distinct narrow band striped filter geometries and four test-patterns on a 4-inch silicon …

Real Time Control Of A Dual Resonator System, Penghuai Shen

Theses

An experimental multi-resonator system has been developed to study modelling and robust control of such systems in a real-time environment. The plant to be controlled consists of a pair of interconnected resonators whose resonant frequency and plant structure are known. The control objectives are to provide closed loop stability and asymptotic regulation of the frequency, gain and phase of each of the resonators. Furthermore, it is desired to use a minimal controller configuration so as to reduce implementational complexity.

The theoretical results follow directly the paper " Decentralized Robust Control of Interconnected Resonators" written by my advisor Dr. Timothy N. …

Hardware Design For Jpeg And A Comparative Study Of Jpeg And Mpeg Image Compression Algorithms, Aravind Soundararajan

Theses

The complete PC-based hardware design along with the initialization and control software of the JPEG algorithm is presented in this thesis. The hardware could run in real-time to compress, decompress and display still frame images. LSI Logic JPEG chipset was used in the design. This is a dedicated chipset for the JPEG compression algorithm.

A simulation software was used for studying the performance of MPEG video compression algorithm. Various video test sequences were compressed through the codec simulation software and the resulting rate-distortion performance was calculated. These are compared with the performance of JPEG based image sequence compressor.

It is …

Experimental Investigation Of Submerged, Turbulent, Axisymmetric Air Jet Impinging On A Flat Plate, Lan Xiao

Theses

Experimental investigation was carried out on the flow characteristics of a circular, submerged, turbulent, axisymmetric air jet impinging normally on a smooth, flat, square, Lucite plate and a sand paper covered plate. Jet issuing from a circular nozzle of 0.5 inch diameter while the Reynolds Number varying from 10,000 to 85,000 was investigated. The flow can be considered incompressible since the pressure and the velocity of the jet were not too high, with Mach Number of the order of 0.3.

Various flow parameters were measured to obtain the velocity and pressure distributions at the surface of the flat Lucite plate, …

Evaluation Of Collision Properties Of Spheres Using High-Speed Video Analysis, Jian Yu

Theses

Experimental evaluation of the collision properties of spheres is performed using video image analysis techniques. A high-speed Kodak EktaPro1000 video camera is utilized to record a collision sequence between two spheres at 1000 frames/sec, and then the images are analyzed to calculate three dimensional translation and rotation before and after the collision. These quantities are used to compute the collision properties for a pair of one inch nylon spheres, i.e. the coefficient of friction, and the coefficients of normal and tangential restitution. The focus of the thesis is on image analysis techniques that provide high accuracy results even though the …

Synthesis And Characterization Of Silicon Nitride Films Deposited By Plasma Enhanced Chemical Vapor Deposition Using Diethylsilane, Yanyao Yu

Theses

Silicon nitride thin films were deposited on silicon substrates using Diethylsilane (DES) and ammonia by Plasma Enhanced Chemical Vapor Deposition (PECVD) over a temperature range of 100 - 300°C, a pressure range of 0.2 - 0.6 torr, and a ratio of NH₃/DES was varied from 6 - 26. The R.F. power and frequency were kept at 0.15 watts/cm^{2 and 100 KHz respectively. DES flow rate was set at 15 sccm for all experiments in this study. One set of experiments were performed at different values of one parameter while the other parameters were kept constant.}

The deposition …

Agitation Requirements For Complete Liquid Dispersion In Liquid-Liquid-Gas Systems, Emad Ahmad Abu-Hakmeh

Theses

A number of studies have been published in the literature on the determination of the agitation intensity at which two immiscible liquids become completely dispersed in mechanically agitated vessels. However, no information is currently available on the agitation intensity required for the complete dispersion of two liquids in the presence of an additional gas phase. Therefore, the main objective of this study was to experimentally determine the minimum agitation speed for complete liquid-liquid dispersion, N_cd, in liquid-liquid-gas systems as a function of gas flow rate, impeller type, impeller size, and impeller off-bottom clearance. The minimum agitation speed was …

Magnetohydrodynamic Behavior Under Current Impulse Excitation, Shi Wu

Theses

The effects of magnetic field on magnetohydrodynamic (MHD) channel flow between two parallel plates of infinite extent are investigated. The applied magnetic field is due to an infinite impulse current-carrying conductor located a small distance below the lower channel wall. Influence of the induced magnetic field, such that the magnetic Reynolds number (R_m) is less than unity but greater than zero, is included. The solution is obtained using the perturbation theory in the expansion of the field components in a double-power series in R_m and I. Calculations for the magneto-fluid components were carried out using personal computer. …

Traffic Management Of A Satellite Communication Network Using Stochastic Optimization, Ambalavanar Arulambalam

Theses

The performance of nonhierachial circuit switched networks at moderate load conditions is improved when alternate routes are made available. However, alternate routes introduce instability under heavy and overloaded conditions, and under these load conditions network performance is found to deteriorate. To alleviate this problem, a control mechanism is used where, a fraction of the capacity of each link is reserved for direct routed calls.

In this work, a traffic management scheme is developed to enhance the performance of a mesh-connected, circuit-switched satellite communication network. The network load is measured and the network is continually adapted by reconfiguring the map to …

Computer Assisted Molecular Modeling Of Thymidine Nucleoside Analog Inhibitors Of Hiv-1 Reverse Transcriptase, Mark A. Fisher

Theses

An active analog approach to receptor mapping was used to identify the three dimensional structural characteristics associated with a series of thymidine nucleoside analog inhibitors of HIV-1 reverse transcriptase (RT) that may be essential for their activity. Atomic substitutions at the 5 and 3' positions of nucleoside analogs confer global structural and electrostatic changes that result in either increased or diminished inhibitory activity. From a structural perspective, the activity differences can be attributed to the presentation of select atoms in three dimensional motifs that are common to all active compounds and absent or distorted in inactive/poorly active compounds.

The identification …

Set-Up Saving Schemes For Printed Circuit Boards Assembly, Oded Z. Maimon, Ezey M. Dar-El, Tali F. Carmon

Industrial and Manufacturing Engineering

Focusing on a basic printed circuit board (PCB) assembly line configuration characterized by very long set-up times, we examine two scheduling methods that can significantly reduce the set-up. Both methods -the Grouped Set-Up (GSU) method that has been recently introduced in the literature and the Sequence Dependent Scheduling (SDS) method, which has not been studied in this context -are based on component commonality among PCB types. Using the typical traditional scheduling method as a benchmark, the GSU and the SDS methods are compared in terms of three performance measures: line throughput, average work-in-process (WIP) inventory level, and implementation complexity. Guidelines …

Minutes Of Tractor Test Museum Committee October 21, 1993, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Status of using tractor test building. Organizing Friends of the Tractor Test Museum

Notes From Museum Committee Meeting October, 1993, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

No abstract provided.

The Spirit Iii Radiometer Data Compression System, Scott E. Budge

Electrical and Computer Engineering Faculty Publications

In this paper, we describe the image data compressor designed and built for the SPIRIT III radiometer which will be used to provide a real-time "quick-look" capability for the instrument. A a brief description of elements of the radiometer design which determine the data compression requirements is given, followed by a description of the VQ-based hybrid data compression algorithm. Highlights of the hardware design are also discussed.

The performance of the compressor is presented. Tests made using data obtained during cold tests of the instrument indicate an RMS error of 6.26 counts for the 10:1 compression mode and 5.83 counts …

Method Of Stemming A Blast Hole, Paul Nicholas Worsey

Mining Engineering Faculty Research & Creative Works

A method of stemming a blast hole loaded with an explosive charge. The blast hole has side walls, an outwardly opening mouth and a central axis extending longitudinally of the blast hole. The method comprises inserting a conduit having a discharge end inwardly through the mouth of the blast hole and positioning the discharge end of the conduit within the blast hole generally adjacent the explosive charge. Particulate stemming material is forced under pressure through the conduit for exit from its discharge end into the blast hole toward the explosive charge thereby to pack stemming material in the blast hole …

Simulation Of Switched Linear Networks, Dietmar Reinhard Skowronn

Dissertations and Theses

This thesis deals with the time-domain analysis of switched linear networks and investigates inherent problems which have to be considered when analyzing this class of networks. Computer simulation requires the use of numerical methods and we focus on the transmission -line modelling technique (TLM) and the numerical inverse Laplace transform. A general approach based on the one-graph modified nodal description is given which allows the formulation of circuit equations of a TLM-modelled circuit by inspection. The numerical equivalence of TLM and trapezoidal rule has been found and a proof is given. A variable step size simulator has been developed based …