Engineering Commons^™

Sensitivity Improvement Of A 1-Μm Ladar System Incorporating An Active Optical Fiber Preamplifier, Michael S. Salisbury, Paul F. Mcmanamon, Bradley D. Duncan

Electro-Optics and Photonics Faculty Publications

In an effort to increase the SNR of a continuous wave, 1-μm all solid state ladar system, a rare-earth-doped optical fiber amplifier is investigated as a preamplifier for ladar return signals. The experimental system is detailed and a theoretical analysis of the fiber amplifier's effect on both heterodyne and direct detection schemes is provided. Beginning with the optical powers incident on the detector, the signal and noises are analyzed, through the detector electronics, to predict the SNR. The SNR is then plotted as a function of the return signal power, and a SNR threshold is defined to determine a minimum …

A Kinematically Intelligent Blackboard For Computer Aided Instruction, J. Keith Nisbett, D. Watkins, Clark R. Barker

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A CAI (computer-aided instruction) package is being developed to be used as a classroom tool for the instruction of undergraduate mechanical engineering students in an introductory kinematics of mechanisms course. This graphical environment allows the instructor to emulate on the projected graphics screen everything that is currently done on the blackboard for planar mechansims. Unlike the blackboard, the software will have the intelligence to interpret the drawings in a kinematic sense so that the drawing of the linkage will behave as a linkage. The software environment involves three principal components: (1) a sketching method for defining the linkage, (2) the …

Visual Observations Of Parking And Driving Areas And Drainage Conditions On Colverfield Lane Fort Wright Trace, Fort Wright, Ky., David L. Allen

Kentucky Transportation Center Research Report

On September 30, 1993, the Condominium Council of Co-Owners of Fort Wright Trace in Fort Wright, Kentucky requested of the Director of the Kentucky Transportation Center that a member of his staff meet with them to review and visually inspect the drainage and pavement conditions in their community. The Head of the Pavements Section met with representatives of the Council on October 13, 1993 as a part of the Transportation Center's Technology Exchange Program.

A visual inspection was conducted of Cloverfield Lane and its associated parking areas beginning at the intersection of Cloverfield Lane and Castle Hill Lane and continuing …

Characterization Of Fatigue Damage In A Metal Matrix Composite (Scs-6/ Ti-15-3) At Elevated Temperature, Brian P. Sanders

Theses and Dissertations

The fatigue characteristics of a unidirectional titanium based metal matrix composite (MMC) were investigated at elevated temperature (427°C). A hybrid strain controlled loading mode was used to subject the 0° and 90° laminas to fatigue. Along with the fatigue tests, microscopy and analytical modeling ware also conducted. This combination of activities led to defining the initiation and progression of damage and deformation in the MMC. Hen loading was parallel to the fiber on, the fatigue behavior was initially dominated by creep deformation of the matrix. Then, depending on the maximum strain, specimen failure was the result either fiber fractures or …

A Nonlinear Three-Dimensional Micromechanics Model For Fiber-Reinforced Laminated Composites, David D. Robertson

Theses and Dissertations

In this study, a three-dimensional micromechanics model is developed. The present capabilities of the model include both unidirectional and laminated composite layups with various types of nonlinear analysis such as a thermoelastic-plastic analysis employing the Prandtl-Reuss flow relations, a thermoviscoplastic analysis using Bodner-Partom unified constitutive theory, and an interfacial damage progression scheme based on a statistical interfacial failure criteria. Such nonlinearities are critical factors during thermomechanical fatigue TMF loading of high temperature composites. Solutions were obtained and extensive comparisons performed with existing micromechanics models, finite element analysis, and experiment with excellent results. In addition, the analysis was developed to require …

Computer Program For Analysis Of Embankments With Tensile Elements, Mikhail E. Slepak, Tommy C. Hopkins

Kentucky Transportation Center Research Report

A generalized computer program for analyzing stability of earth structures reinforced with geosynthetics (geogrids, geotextiles etc.) was developed in this research study. The newly proposed computer program was built in such a way that a reinforced slope stability problem may be analyzed using a variety of limit equilibrium methods including Hopkins', Morgenstern and Price's, Bishop's methods, Raulin's perturbation method, as well as new perturbation methods proposed by the authors of this study. It was shown in the research study that two versions of the Bishop's method were possible in the case of reinforced analyses: the traditionally used version referred to …

Periodic Pn Sequence Delay Estimation Using Phase Spectrum Data, Kurt Louis Kosbar, Jorge J. Zaninovich

Electrical and Computer Engineering Faculty Research & Creative Works

An algorithm for estimating the delay of a periodic pseudonoise (PN) sequence is presented. It is a rapid, block-based estimator that can be used for both linear and nonlinear codes. The algorithm exploits the periodicity of the difference between the phase spectra of the received sequence and a local reference. The estimator takes the Fourier transform of the phase spectrum difference data, and searches for the fundamental frequency. Unlike previously described methods, phase unwrapping is not required. The performance in the presence of additive white Gaussian noise (AWGN) and a continuous wave (CW) jammer is investigated using computer simulation. Comparisons …

Electrorheological Fluids And Their Application In Automotive Clutches: Design Procedures And Recommendations, Ihab Fahmy

Archived Theses and Dissertations

No abstract provided.

Behavior Of Concrete Masonry Prisms Under Axial Compression, Tarek Ghoneim Mohamed Ghoneim

Archived Theses and Dissertations

No abstract provided.

A Summary Of Highway Revenues, Expenses And Distributions: 1986 Through 1993, Herpicc

Indiana Local Technical Assistance Program (LTAP) Publications

This report shows the history of receipts, expenses and distributions of revenues that provide funding to all local governments for highway, road and street work.

A Robust Aggregation Approach To Simplification Of Manufacturing Flow Line Models, Paul Savory

Department of Industrial and Management Systems Engineering: Presentations

One of the more difficult tasks facing a modeler in developing a simulation model of a discrete part manufacturing system is deciding at what level of abstraction to represent the resources of the system. For example, questions about plant capacity can be modeled with a simple model, whereas questions regarding the efficiency of different part scheduling rules can only be answered with a more detailed model. In developing a simulation model, most of the actual features of the system under study must be ignored and an abstraction must be developed. If done correctly, this idealization provides a useful approximation of …

A Robust Aggregation Approach To Simplification Of Manufacturing Flow Line Models, Paul Savory

Department of Industrial and Management Systems Engineering: Faculty Publications

One of the more difficult tasks facing a modeler in developing a simulation model of a discrete part manufacturing system is deciding at what level of abstraction to represent the resources of the system. For example, questions about plant capacity can be modeled with a simple model, whereas questions regarding the efficiency of different part scheduling rules can only be answered with a more detailed model. In developing a simulation model, most of the actual features of the system under study must be ignored and an abstraction must be developed. If done correctly, this idealization provides a useful approximation of …

Crew Scheduling Of Space Operations Squadrons (Sops), Marianne Idzi

Theses and Dissertations

The mission of Space Operations Squadrons is continuous support of military satellite systems. The scheduling problem associated with conducting continuous operations is threefold. The first problem is finding cyclical crew shift schedules that meet daily manning requirements, adhere to current regulations, contain a minimum number of workshift changes during consecutive duty days, and maximize the non-duty time allowed between duty shifts. The second problem is to establish a sea of criteria to evaluate alternative shift schedules. Finally, the third problem is to minimize the number of personnel required to meet the scheduling requirements stated in the first problem. This study …

The Application Of Simulated Annealing To Stochastic Systems, Charles B. Warrender

Theses and Dissertations

Simulated Annealing was used to optimize three constrained simulation models. For each of these models, seven different acceptance functions were evaluated and compared against the performance of Local Search. These comparisons demonstrated the affect that different acceptance functions have on the performance of the algorithm. The performance was measured by the average solution quality and average efficiency obtained from several runs. The first model facilitated the implementation of Simulated Annealing using the SLAM simulation language. The configuration space was small, described by only two decision variables. It demonstrated the viability of using Simulated Annealing to optimize the variable settings in …

S/O Modeling Technique For Optimal Containment Of Light Hydrocarbons In Contaminated Unconfined Aquifers, Grant S. Cooper Jr., Jagath J. Kaluarachchi, Richard C. Peralta

Civil and Environmental Engineering Faculty Publications

An innovative approach is presented to minimize pumping for immobilizing a floating plume of a light non-aqueous phase liquid (LNAPL). The best pumping strategy is determined to contain the free oil product and provide for gradient control of the water table. This approach combined detailed simulation, statistical analysis, and optimization. This modeling technique uses regression equations that describe system response to variable pumping stimuli. The regression equations were developed from analysis of systematically performed simulations of multiphase flow in an areal region of an unconfined aquifer. Simulations were performed using ARMOS, a finite element model. ARMOS can be used simulate …

Deposition Of Particles In A Convergent Channel, Hsi-Chung Chiou

Dissertations

The deposition of suspensions for uniform flow in convergent channels under the combined influences of inertia, viscous, gravity and electrostatic image forces were studied theoretically. A two dimensional, steady, incompressible, laminar flow with uniform velocity profile was assumed.

It was found that when the ratio of charge parameter to gravity parameter, Q/G, is greater than 5, the deposition is dominated by the electrostatic image force alone and that the gravity effect can be neglected. When the ratio of charge parameter to gravity parameter, Q/G, is less than 0.001, the image force can then be neglected. It was also observed that …

Engineering Design Of An Anaerobic-Aerobic System To Treat Chlorophenols, Chih-Ju Jou

Dissertations

The present work was aimed at determining the effect of the main operating parameters on the performance of an anaerobic-aerobic reactor system to degrade toxic chlorinated compounds. In previous work conducted in the Biological Treatment Lab at NJIT it was shown that this system is capable of achieving the complete degradation of chlorophenols. In that system, reductive dehalogenation took place in the first anaerobic reactor, which was followed by a second aerobic reactor in which the degradation products of the first reactor were mineralized. In the present work the role of a number of parameters that can have a significant …

Pyrolysis And Oxidation Of Chloromethanes Experiment And Modeling, Wenpin Ho

Dissertations

An experimental study on pyrolysis and oxidation of CH₂Cl₂ and CH₃Cl in oxygen/hydrogen or oxygen/methane mixtures and argon bath gas was carried out at 1 atmosphere pressure in tubular flow reactors. Degradation of CH₂Cl₂, or CH₃CI, along with the formation and destruction of intermediate and final products was analyzed systematically over 873 to 1273°K, with average residence times of 0.2 to 2.0 seconds.

Thermochemical parameters: enthalpy, entropy, and heat capacities for many chloro-oxy-carbon products and intermediates are calculated using the techniques of group additivity and the THERM computer code. …

On Generalized Adaptive Neural Filter, Zhiqiang Zhang

Dissertations

Linear filters have historically been used in the past as the most useful tools for suppressing noise in signal processing. It has been shown that the optimal filter which minimizes the mean square error (MSE) between the filter output and the desired output is a linear filter provided that the noise is additive white Gaussian noise (AWGN). However, in most signal processing applications, the noise in the channel through which a signal is transmitted is not AWGN; it is not stationary, and it may have unknown characteristics.

To overcome the shortcomings of linear filters, nonlinear filters ranging from the median …

An Analysis Of A Custom Expanding Total Femoral Prosthesis With A Rotating Hinge Knee, Ramarao Gundlapalli, V. Gundlapalli

Theses

Osteosarcoma is the most common malignant bone tumor in the pediatric age group. This thesis presents the analysis of a total femoral prosthesis implanted in a 9 year old black male. The design includes a bipolar, expanding mid-shaft component, and a rotating hinge knee used in the reconstruction of the patient's right lower limb after surgical resection of the femur. The areas being analyzed are (i) the trochanteric attachment, (ii) the expanding component, and (iii) the rotating hinge knee. The stresses acting on the cables reconnecting the greater and lesser trochanter were determined for bipedal stance, single-legged stance, stance phase …

Performance Of The Stirling Cycle Thermal Regenerator, Cesar A. Cravo

Theses

Most of the methods developed to analyze the performance of regenerators make assumptions which are not valid in Stirling cycle regenerators. To more adequately describe the conditions of an actual Stirling cycle regenerator a more complex method has been investigated. This method takes into account the time dependence of the mass flow and pressure fluctuations and considers the temperature dependence of the thermophysical properties.

The solution is accomplished by finite difference techniques. The solution determines the temperature distributions of the gas and matrix along the length of the regenerator and calculates the effectiveness over a cycle. A wide range of …

Modeling Of Rapid Thermal Processing System By Finite Element Method, Helen Martynov

Theses

A finite element model for the Rapid Thermal Processing (RTP) system at NJIT was developed based on the software package MSC/NASTRAN. Based on this model, a thermal analysis of the 9" chamber, 3 zones (37 lamps) RTP system was conducted for various modes of system operation with the 6" silicon wafer temperature varying from 300°K to 1100°K. An open-loop control algorithm was developed in order to study the dependence of wafer temperature on time, position, and applied radiant heat distribution. It was shown that the non-uniformity in the radial temperature profile can be less than 3°C during wafer heating at …

Comparison Between Stimulated Emg And Natural Emg, Zak Belfki

Theses

The electromyograph (EMG) signal generated from a cat's jaw muscle in movement, is analyzed. After a series of experiments at UMDNJ, three major categories of EMG were recorded: rest EMG, biting EMG and hissing EMG.

The biting files contained a series of EMG collected in successive episodes. Power spectrum and statistical analysis were applied to the episodes. Each episode had approximately 43,000 samples. Results showed that these episodes had a similar spectrum with statistically the same mean and variance.

The hissing files were produced by electrical stimulation of the hypothalamus and contained EMG embedded in a stimulus artifact. The problem …

A High-Temperature Pressure Sensor Utilizing Linear Voltage Differential Transformer (Lvdt) And Silicon Wafer-To-Wafer Fusion Bonding Technologies, Robert Sylvester Okojie

Theses

A novel high-temperature pressure sensor was designed based on the principle of magnetic induction. The device is meant to correct the problems inherent in conventional Solid-State pressure transducers such as piezoresistive and capacitive at temperatures above 300°C. Prominent among these problems are increased leakage current, reduced absolute sensitivity, redistributed impurity concentration profile, and thermal mismatch.

This thesis combined the Biot Savart magnetostatic principle and the theory of deflecting clamped circular plates to obtain the microelectromechanical relationship. The problem of thermal mismatch was resolved by the symmetrical layering of a Si₃N₄/TaSi₂/Si₃N₄ sandwich, …

Design, Fabrication And Characterization Of Infrared Filters, Samiul Amin

Theses

In-situ temperature monitoring, mapping, and control have become significant in semiconductor processes. Temperature of these processes can be measured by making use of the thermal emission from substrates in the infrared region. Various methods have been proposed to provide multicolor infrared detection. One such method involves placing segmented infrared filters close to the focal plane. The present study aims at gaining an insight into the design, fabrication and characterization of infrared filters. Filters were designed and fabricated with peak transmission at 1.5, 3.0, and 4.5 m. Extensive spectroscopic studies, using FTIR spectroscopy, have been performed in the infrared region, on …

Detection Of Planar Facets In Noisy Range Images, Ajey S. Atre

Theses

Segmentation of the image is one of the major tasks of a machine vision system designed for constructing a three-dimensional representation of the object being imaged. A robust approach for segmenting planar surfaces from range images is presented in this paper. An algorithm based on clustering through fuzzy covariance matrices, which has been proposed by Gustafson and Kessel is considered for planar segmentation. However this algorithm performs poorly if the data is noisy, which is usually the case in real life applications. In order to handle noisy data, a robust modification, based on the "noise clustering" concept, is introduced to …

Attachment Systems For Curtain Wall Construction And Maintenance Requirements, Peter S. Donaghy

Theses

Curtain Wall construction has become a familiar and widely used method for enclosing structures. Since the 1950's this type of enclosure has become increasingly the most popular choice of Designers and Builders. During this period of development, however, acceptable and uniform building standards have not evolved to create adequate quality control.

This thesis investigates some of the design requirements of Curtain Walls, in particular the attachment system, and the maintenance costs that are directly related to the attachment system and the consequences of such failures.

Rigorous Te Solution To The Staircase Model Of The Dielectric Wedge Antenna, Wan-Yu Chen

Theses

The rigorous TE solution to the staircase model of the dielectric wedge antenna is presented. The fundamental, even TE surface wave mode of the dielectric slab waveguide is taken to excite a dielectric wedge which is formed by symmetrically tapering the slab. The method of solution is based on Marcuse's step-transition method. Radiation patterns of power gain are presented which show increased maximum power gains and narrower main lobe beamwidths for longer wedges. For higher dielectric constant material, the main lobe beamwidth is increased. In all cases examined, negligible sidelobes were obtained.

A Parallel Processing Architecture For Dqdb Protocol Implementation, Nilesh Vinubhai Gandhi

Theses

The high bandwidth transmission links, which have been provided by the advances of Fiber Optics Technology, reduce drastically the packet transmission times and place new demands on the nodal protocol processing. Segmentation and reassembly of packets, computation of checksums, introduction of source and destination addresses, etc., must be performed extremely fast in order to prevent node processing from becoming the bottleneck of the transmission. Parallel processing enables the execution of the previous tasks on multiple packets simultaneously and therefore has the potential of addressing the issue of fast node processing successfully. In this thesis we focus on the Medium Access …

Laser Ablation Of Silicon Surfaces : The Effects Of A Low Level Background Light, Taposh Kumar Gayen

Theses

The performance of high speed optoelectronic and microelectronic devices largely depends on the uniqueness and development of the fabrication technology. Laser ablation has proven to be an effective three dimensional surface patterning technology. In this thesis, we present findings on the patterning of semiconductor surfaces using laser ablation in air as well as in solutions.

In this thesis, we suggest that the depth of a pattern induced on silicon by firing a pulsed excimer laser in air varies almost linearly with the number of pulses. We report that a He-Ne laser as a background light source has virtually little or …