Engineering Commons^™

Packaging Management Organizations: A Case Study, Stephen A. Raper

Masters Theses

"The role of packaging management is taking on an increasingly crucial role as an aid to the success of companies today. This is a case study on the Functional Packaging Management (FPM) organizations of two companies in different industries. The case study examines the structure of the two functions, and examines their missions, responsibilities, and activities. This information is formulated into a definition of FPM for each company. The definitions are then compared to each other and to a literature theorized definition.

The knowledge gained by this case study illustrates that several factors such as the product/market served, alignment in …

New Ni (Ii) Thiocyanato-Sulphur Dicyanide Complexes, Maha Y Khaled

Archived Theses and Dissertations

No abstract provided.

Enthalpies Of Solution Of Co2 In Aqueous Methyldiethanolamine Solutions, Keith E. Merkley

Theses and Dissertations

The enthalpies of solution, H^S, of carbon dioxide in aqueous methyldiethanolamine were measured with an isothermal flow calorimeter over wide ranges of temperature, pressure, weight percent MDEA, and loading (gmole CO₂/gmole MDEA). The values of H^S (kJ/gmole CO₂) were found to be constant up to the saturation concentration of CO₂ in the aqueous solution. In addition, experimental data showed that H^S was independent of the total pressure over the solution, but linearly dependent upon both temperature and weight percent MDEA as was given by a correlation. A computer program based upon …

Structural Behavior Of Members Consisting Of Flat And Curved Elements, M. Brad Parks

Doctoral Dissertations

"Local buckling of stiffened and unstiffened curved elements has been investigated both experimentally and analytically. Stiffened curved elements are supported on all four edges while unstiffened curved elements are supported along three edges with one longitudinal edge free.

A series of stub column, beam, and shear tests have been performed for sections containing curved elements. The tested specimens were formed from sheet steels with yield strengths ranging from 27 to 88 ksi. The radius-to-thickness, R/t, values of the curved elements varied from 12 to 438 whereas the arc length-to-thickness, bit, ratios ranged from 23 to 218.

As a result of …

Compiling Unit Clauses For The Warren Abstract Machine, George D. Herbert

UNF Graduate Theses and Dissertations

This thesis describes the design, development, and installation of a computer program which compiles unit clauses generated in a Prolog-based environment at Argonne National Laboratories into Warren Abstract Machine (WAM) code. The program enhances the capabilities of the environment by providing rapid unification and subsumption tests for the very significant class of unit clauses. This should improve performance substantially for large programs that generate and use many unit clauses.

Phase Equilibria From Pvt Measurements For Carbon Dioxide, Water And N-Decane, Michael Nduka Okafor

Doctoral Dissertations

"Phase equilibrium properties for the carbon dioxide - water - n-decane system were determined from pressure-temperature-volume (PVT) measurements. PVT properties were also obtained for pure carbon dioxide and water, and the binary mixtures of carbon dioxide - water and carbon dioxide - n-decane. The experiments were conducted at temperatures of 313.17, 353.15 and 393.15 Kelvin, and at pressures from 37 to 416 bar. Measurements for the mixtures were terminated when complete miscibility was observed.

The Perturbed-Hard-Chain (PHC) equation of state developed by Gmehling et al. (1979) was chosen to correlate the measured data because of its ability to handle the …

Studies Of Defect Structure And Oxidation-Reduction Behavior Of Undoped Lamno₃, Sr-Doped Lamno₃ And Mg-Doped Lamno₃, Jen-Ho Kuo

Doctoral Dissertations

"Undoped LaMnO₃, Sr-doped LaMnO₃ and Mg-doped LaMnO₃ showed reversible oxidation-reduction behavior. These perovskites can be excess, stoichiometric or deficient in oxygen content depending on the specific conditions. Under very reducing conditions these oxides will decompose into new phases. Phase stabilities for these oxides were determined. The results showed that both Sr and Mg doping caused the LaMnO₃ to dissociate at higher oxygen activities than for undoped LaMnO₃.

Defect models were proposed to interpret the TG results, in which metal vacancies are assumed for the oxygen excess condition and oxygen vacancies are assumed for the oxygen deficient condition. Thermodynamic properties were …

Effects Of The Luminous Environment On Managerial Decision Making, Marc Clay Belcher

Doctoral Dissertations

"Little is known about the influence the physical environment may have on the way a manager goes about making decisions. This work considers one element of the environment, lighting, and attempts to establish a relationship between that element and the decision strategy a manager may select.

From a review of the literature on the effects of light on man and from the field of decision making, a model is posited suggesting that the luminous environment affects decision making. Since others have established that mood influences how decisions are made, and since it is suggested in the literature that lighting affects …

Fundamental Study Of The Role Of Cathode Structure On Zinc Electrowinning, Horacio M. Aros

Doctoral Dissertations

"The influence of cathode macromorphology on the current efficiency of zinc electrowinning was determined.

The studies have shown that surface roughness affects current efficiency during zinc electrowinning, particularly when the electrolyte contains impurities such as nickel and antimony. Current efficiency does not change with surface roughness as long as the electrolyte is sufficiently pure.

Zinc deposited on smooth zinc cathodes tends to retain a more favorable structure and macromorphology, which is less sensitive to the effects caused by antimony and nickel. Glue helps to counteract the effect of the impurities; however, its presence in the electrolyte at certain combinations with …

Experimental Vapor-Liquid Equilibria Of Propyne With Propane, Propene And Propadiene, Edward Allen Kyser

Doctoral Dissertations

"Vapor pressures for pure propane, pure propene, impure propadiene and pure propyne and 19 binary mixtures of propane, propene, and propadiene with propyne are reported at -20, 5, 30, 55 and 80° C. An equation of state utilizing pure component saturated vapor and liquid densities is used to correlate all the data and the effect of the propadiene impurities was theoretically removed. The data of Burcham (1981) are recorrelated using new information about the impurities, and different results are obtained. Calculated relative volatilities and saturated densities are reported for the systems propane-propyne, propene-propyne, propadiene-propyne and propane-propadiene"-- Abstract, p. ii

Development Of Design Criteria For Ferritic Stainless Steel Cold-Formed Structural Members And Connections, Pieter Van Der Merwe

Doctoral Dissertations

"This dissertation describes the development of the basic criteria needed for the design of structural members cold-formed from certain ferritic stainless steels. The Allowable Stress Design method as well as the Load and Resistance Factor Design method receive attention. The ferritic stainless steels under consideration are: Types AISI 409 and 430 as well as a modified Type 409 steel, designated 3CR12 steel, developed and produced by the speciality steel producing company, Middelburg Steel and Alloys in South Africa.

The mechanical properties needed for structural design are established. It is shown through an experimental study that the design provisions for the …

Bubble Formation, Movement And Distortion In Viscous Glass, Simon Cheng-Ping Wang

Doctoral Dissertations

"A study of bubble formation, movement and distortion in viscous glass is described. A glass rod containing an irregularly shaped hole is heated to a temperature at where the glass viscosity is low enough to let the hole form a spherical bubble. Spheration occurs as the bubble moves upward in the glass rod. At the proper time, the rising bubble is decelerated and brought to a stop by increasing the glass viscosity by slowly reducing the temperature. The entrapped bubble is then cut from the glass rod and heated again, if necessary, to a lower temperature, to reduce distortion of …

A Status Study And Critical Analysis Of Present And Future Program Goals For Industrial Arts In The State Of Nebraska, Kennard G. Larson

Dissertations and Theses @ UNI

This study was conducted to describe the present status and the desired future of the industrial arts programs in the public schools in the State of Nebraska. Information concerning program goals was obtained from a descriptive survey sample of industrial arts teachers, secondary school principals, school board presidents, and industrial arts teacher educators. Two dimensions were examined: the importance of 23 program goal statements as perceived in the present industrial arts program, and the importance of the same goal statements as perceived for the industrial arts program in the future.

The outcome of the study was a compilation of data …

A Comparison Of Present And Future Tasks Performed By Quality Engineers Of Leading And Nonleading American Manufacturing Firms, Zenon Theodore Smolarek

Dissertations and Theses @ UNI

This study identified and compared the level of importance and frequency of performance of 34 selected quality engineering tasks in the present and five years hence and determined potential catalysts for any expected change between the present and the future. Two sample groups of practicing certified quality engineers working for manufacturing companies in the United States were surveyed in three rounds to obtain the data. Group I consisted of 86 engineers working for companies that had been identified as leaders in product quality in a 1985 Gallup study. Group II consisted of 96 engineers from other companies.

The study attempted …

Coupled Bending-Torsion Steady-State Response Of Pretwisted, Nonuniform Rotating Beams Using A Transfer-Matrix Method, Carl E. Gray Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

Using the Newtonian method, the equations of motion are developed for the coupled bending-torsion steady-state response of beams rotating at constant angular velocity in a fixed plane. The resulting equations are valid to first order strain-displacement relationships for a long beam with all other nonlinear terms retained. In addition, the equations are valid for beams with the mass centroidal axis offset (eccentric) from the elastic axis, nonuniform mass and section properties, and variable twist. The solution of these coupled, nonlinear, nonhomogeneous, differential equations is obtained by modifying a Hunter linear second-order transfer-matrix solution procedure to solve the nonlinear differential equations …

Implementation And Performance Analysis Of Numerical Algorithms On The Mpp, Flex/32, And Cray/2, Raad A. Fatoohi

Electrical & Computer Engineering Theses & Dissertations

This dissertation presents the results of the implementation of a number of numerical algorithms on three parallel/vector computers. The object of this research is to determine how well, or poorly, a number of numerical algorithms would map onto three different architectures and to analyze the performance of these architectures using these algorithms. These algorithms are: a relaxation scheme for the solution of the Cauchy-Riemann equations, an ADI method for the solution of the diffusion equation, and a compact difference scheme for the solution of two-dimensional Navier-Stokes equations. The computers were chosen so as to encompass a variety of architectures. They …

The Use Of Pure Cultures As A Means Of Understanding The Performance Of A Mixed Culture In The Biodegradation Of Phenol, Chirasakdi Varuntanya

Dissertations

In an effort to gain a more fundamental understanding of the performance of mixed microbial cultures in the biodegradation of toxic organic chemicals, studies have been conducted using three phenol degrading species isolated from a municipal treatment plant. The rate of phenol degradation was investigated for each of the three pure phenol degrading species, and various combinations of the three species. A simple competitive model was used to predict the behavior of the mixed cultures by using the pure culture Monod rate constants. The model fit the growth data for total biomass very well, although (as with the pure culture …

High Temperature Reactions Of 1,2-Dichloroethane With Water Vapor In A Tubular Reactor, Charles E. Anderson

Theses

This study examines the reaction of l,2-dichloroethane with water vapor. The linear-flow method is utilized, assuming plug flow without axial diffusion. Normal operation is at atmospheric pressure and the reactor is a quartz tube in a thermal region 45 cm in length. Two reactor diameters of 0.4 cm and l.05 cm are used. Water and l,2-dichloroethane enter the system in liquid phase via syringe pumps. After vaporizing in heated tubing, they are combined with argon, the reactor carrier gas. The molar ratio of water to l,2-dichloroethane is 55:l and varied residence times are achieved by changing the argon flowrate. Reactor …

Elastic-Plastic Analysis Of Axisymmetrically Loaded Isotropic Circular And Annular Plates Undergoing Large Deflections, Aiman Raji Akileh

Dissertations and Theses

The concept of load analogy is used in the elastic and elastic-plastic analysis of isotropic circular and annular plates undergoing moderately large deflection. The effects of the nonlinear terms of lateral displacement and the plastic strains are considered as additional fictitious lateral loads, edge moments, and in-plane forces acting on the plate. The solution of an elastic or elastic-plastic Von Karman type plate is hence reduced to a set of two equivalent elastic plate problems with small displacements, namely, a plane problem in elasticity and a linear elastic plate bending problem. The method of finite element is employed to solve …

A Dynamic Study Of The Effect Of Cationic Starch Molecular Weight And Charge On Filler And Fines Flocculation, Deflocculation, And Reflocculation, Bob Shian-Hou Ching

Masters Theses

A modified laboratory instrument was used to dynamically monitor the flocculation of fines and filler under various shear conditions on the "seconds" basis. A three-way factorial design and ANOVA were used to evaluate the significance of cationio starch molecular weight and charge in affecting fines and filler flocculation, deflocculation, and reflocculation. The reduction of molecular weight under high shear was suggested by the results. Both main effects and interaction effects of charge and molecular weight were important in determining flocculation. Charge was the only significant factor for the reflocculation process. Molecular weight was more important than charge in imparting shear …

Trends In Metal (Pb, Zn, Ni, As And Se) Concentrations In The New Jersey Air Environment, Geoffrey Ike Ejiofor

Theses

The trend and atmospheric concentrations of five trace elements (Pb, Zn, Ni, As and Se) were studied at Newark (urban site) and Ringwood (rural site), New Jersey, during January - September 1985, whilst the Hackensack Meadowlands, New Jersey were monitored during October 1985-March 1986. The analytical procedure involved collection of the airborne particulates on a glass fiber filter using a non-dichotomous high volume sampler. The samples were digested and analyzed using the atomic absorption spectrophotometer. It was ascertained that Newark and Meadowlands exhibited higher average concentrations of Zinc and Lead than Ringwood. It was concluded all the metals originated mostly …

Calibration Of Old Dominion University Low-Speed Wind Tunnel, Nicolaos P. Sargianos

Mechanical & Aerospace Engineering Theses & Dissertations

No Abstract.

Chemoviscosity Modeling Of Thermosetting Resins, Jia-Mo Bai

Mechanical & Aerospace Engineering Theses & Dissertations

A new analytical model for simulating chemoviscosity of thermosetting resin has been formulated. The model is developed by modifying the well-established Williams-Landel-Ferry (WLF) theory in polymer rheology for thermoplastic materials. By introducing a relationship between the glass transition temperature Tg (t) and the degree of cure a(t) of the resin system under cure, the WLF theory can be modified to account for the factor of reaction time. Temperature-dependent functions of the modified WLF theory constants C₁(T) and C₂(T) were determined from the isothermal cure data. Theoretical predictions of the model for the resin under dynamic …

An Investigation Of Overvoltage Effects On A Gas-Blown Spark Gap, Michael Steven Mazzola

Electrical & Computer Engineering Theses & Dissertations

This experimental investigation addresses the anomalous overvoltage breakdown and subsequent recovery characteristics observed in gas-blown spark gaps. Previous investigations have reported a two-stage recovery process in self-break, pulse-charged, gas-blown spark gape in which the spark gap recovers first to an intermediate breakdown strength before recovering to the undisturbed breakdown voltage. The recovery process has been explained in terms of two different characteristic times. The first is that required to obtain initial recovery in which the spark gap regains its intrinsic breakdown strength. The second time is that required to obtain final recovery in which the pulse-charged spark gap regains the …

Wind Streamline Ambiguity Removal Of Microwave Scatterometer Data, Hans W. Zaepfel

Electrical & Computer Engineering Theses & Dissertations

There is a class of satellite microwave scatterometers that return oceanographic information which includes wind vectors with directional ambiguity. The first part of the ambiguity removal process is to reduce the data to a directional ambiguity of 180°. This thesis shows that wind direction change contains the information required for streamline ambiguity removal and that syntactic pattern recognition techniques can be used to locate the areas of wind direction change. Spreading the information along the areas of wind direction change results in the removal of the streamline ambiguity. The algorithm is implemented and the results are presented showing that it …

A Frequency Domain Digital Signal Processor For Laser Velocimeter Systems, Andreas Evangelos Savvakis

Electrical & Computer Engineering Theses & Dissertations

A new signal processor for laser velocimeter systems is proposed. The proposed processor incorporates automatic initialization, real time operation, and can efficiently process input signals comprised of as low as 150 photons, with mean oscillation frequency up to 100 MHZ, and input turbulence from 0 to 20%. A bank of digital bandpass filters is employed for the energy spectrum estimation of the input signal. A deterministic model is developed to describe the relationship between the filter output energies and the input signal parameters. The input frequency is estimated by linearly weighting the filter output energies. A spline function approximation approach …

The Biochemical Fuel Cell : Conversion Of Waste To Energy, Charles August Mielke

Theses

A batch biochemical-fuel cell was constructed and studies on the production of bioelectric energy using an alga Scenesdesmus quadricauda, and a bacterium Desulfovibrio desulfuricans, were conducted. Results were compared for a steady state cell using various concentrations of media components and showed that a 1000-fold increase in the concentration of media components produced a net potential output of 0.03mv/ml compared to an initial output of 0.02mv/ml. Further studies showed the biochemical net potential output using activated sludge from a waste treatment facility was 0.01mv/ml compared to 0.02mv/ml for the cell using the initial media concentration.

The system exhibited steady state …

Biorhythms And Industrial Injuries, James Vincent Detitta

Theses

The purpose of this study is to determine whether or not a relationship exists between the time of an industrial injury and a specific position on the biorhythm scale known as a critical day.

Ninety-six employees who worked at the E. I. du Pont de Nemours Plant in Parlin, New Jersey served as a test group during 1980. In order to determine if a relationship did exist, the subjects' biorhythmic cycles for 1980 were charted and then their injury performance was monitored during that year to see if the injury date corresponded with a critical day. An additional test was …

Experimental Study Of Rectangular Reinforced Concrete Members Under Combined Biaxial Bending And Tension, Naresh B. Patel

Theses

In practice it is a very common case to have a column subjected to combined effects of axial tension and biaxial bending moments and very few efforts are done to get good design approach for such special members.

So for this purpose, experiments were carried out on rectangular shapecolumns. Rectangular shaped columns were casted in homogeneous with brackets - one on each end and at connections haunches were provided to avoid the possible end failure. The overall shape of this configuration was "H" shape. Two hydraulic jacks were used; one on either side of the columns and thus column section …

Logic Simulation And Methodologies For Design For Testability, Ravi Shankar Prasad Mallampalli

Theses

This thesis describes the method used for developing the standard TTL blocks using the logic simulator SPLICE1. It also gives a comprehensive overview of methods which can be used for designing a circuit which is testable. A format called Electronic Design Interchange Format (EDIF) is also described as a tool which can be used for transporting design data in the VLSI indgstry.