Engineering Commons^™

Electrical Characterization Of Preoxide Growth Fluorine Incorporated Thin Sio2 Films, Nilay J. Patel

Theses

Analyses of electrical characterization, of thin SiO₂ films grown on virgin and etched silicon surfaces, are presented here. The characterization techniques employed in these experiments are High Frequency Capacitance-Voltage (C-V), Capacitance-Time (C-T) & MOS Doping Profile and Static & Dynamic Current-Voltage (I-V) measurements. The structures, with areas ranging from 0.001-0.05 cm², used in this study are Al/Poly/SiO₂/Si/Al capacitors fabricated on virgin and C₂F₆ CHF₃ + He plasma exposed n-Si substrates. In this experiment, we have studied the effect of sacrificial oxidation. In this step, the oxide is thermally grown on the …

Efficient Multiprocessor Scheduling Based On Genetic Algorithms, Hong Ren

Theses

The problem of multiprocessor scheduling can be stated as finding a schedule for a general task graph to be executed on a multiprocessor system so that the schedule length can be minimized. This scheduling problem in known to be NP-hard and methods based on heuristic search have been proposed to obtain optimal and sub-optimal solutions to the problem. Genetic algorithms have recently received much attention as robust stochastic searching algorithms for various optimization problems. In this thesis, we propose an efficient method based on genetic algorithms to solve the multiprocessor scheduling problem. The representation of the search node will be …

A Microengineered Beam Diaphragm Structure For The High Performance Pressure Sensor, Alkesh Shah

Theses

The thesis details the design for a novel microengineered beam diaphragm structure for piezoresistive pressure sensor applications. The beam diaphragm structure is used as a pressure sensing device, within a Wheatstone bridge circuit. The single crystal silicon with [100] orientation is used for the beam diaphragm structure.

It has the advantages of high sensitivity(2.56 v/v/mm of Hg), good linearity(3Kpa to 1.4 Mpa) and overpressure protection with the help of the bosses. It's protection range is about 400 times the standard pressure range. The beam diaphragm structure has two rectangular bosses which are formed by anisotropic etching. Two pairs of diffused …

Mapping Hierarchical Structures Onto Hypercubes, Sandip C. Patel

Theses

Hierarchically structured arrays of processors are appropriate for low-level and intermediate-level image processing and computer vision. The most widely used structure is the pyramid. Neverthless, pyramid machines do not support the efficient implementation of the majority of scientific algorithms and their cost may become prohibitively high. In contrast, hypercube machines efficiently implement a wide variety of important algorithms due to the versatility of the underlying network. In fact, hypercube-based systems have become commercially available. The hypercube network supports both regular and irregular communications and it can efficiently simulate a variety of other structures like rings, trees, meshes, pyramids, etc. Thus, …

An Experimental Investigation Of The Finite Time Efficiency Of A Peltier Refrigeration Device, Thomas Schneider

Dissertations and Theses

Since the need of energy conservation has become more and more urgent in the past decades, there has been an increased interest in the study and development of more efficient energy conversion systems. One of the fields that have arisen from that endeavor is a branch of physics called Finite Time Thermodynamics (FIT). It may be said that FIT was initiated through the famous paper by Curzon and Ahlborn (1975) that established new bounds on the efficiency of a finite time Carnot heat engine. Before, the traditional treatments gave a fundamental upper limit on the efficiency of any heat engine. …

Inhibited Spontaneous Emission By Photonic Band Gaps In A Square Lattice Of Periodic Dielectric Medium, Abdullah Al-Ghamdi

Masters Theses

The concepts of band theory for electrons can be employed to describe the behavior of electromagnetic waves propagating in two-dimensional, periodic dielectric structures. These two-dimensional, periodic structures can produce photonic band gaps in which the spontaneous emission by atoms embedded in the structure is prohibited and as a result the performance of many semiconductor devices can be enhanced. The calculations are based on finding the eigenvalues of the algebraic equation for the frequencies of electromagnetic waves moving in a square lattice composed of square dielectric rods with different dielectric constants.

Computer Aided Process Planning System For Generating Alternative Process Plans, Rao T. Gali

Masters Theses

Computer Aided Process Planning (CAPP) has a key role in Computer Integrated Manufacturing (CIM) as an interface between design and manufacturing. Current CAPP systems treat process planning as a static function, and always generate the same machine and process combinations. Thus, these CAPP systems are inadequate for advanced manufacturing facilities such as Flexible Manufacturing Systems (FMS). This thesis presents research conducted for the design and development of a CAPP system called Alternative Computer Aided Process Planning (A-CAPP) which generates alternative process plans by interacting with production planning and machine loading functions to satisfy system capacity constraints.

A-CAPP is a variant …

Study Of Parameters Affecting Performance Of Automotive Transmission Filters, Debra Cauthen

All Theses

Modified isocyanate binders have been introduced as a possible alternative to phenolic resins for bonding nonwovens in automatic transmission filtration. The Occupational Safety and Health Administration (OSHA) and the American Conference of Governmental Industrial Hygienists (ACGIH) have placed restrictions on worker exposure to phenol-formaldehyde due to toxicological and ecological concerns. Modified isocyanates are unproven for bonding needlefelts in this application.

The Effect Of Defense Management Review Decision 904, Stock Funding Depot Level Reparables, On Cash Flow Within The Reparable Support Division Of The Air Force Stock Fund, Deborah A. Elliot

Theses and Dissertations

This study investigated what the potential cash flow condition of the Reparable Support Division of the Air Force Stock Fund might be after final implementation of the procedures outlined in Defense Management Review Decision 904, Stock Funding Depot Level Reparables. The operation of the future Reparable Support Division was modelled using the General Purpose Simulation Software (GPSS/H) package and future cash flow conditions were projected through use of this model. Recommendations were then made based on the results of these projections and based on other data gathered during the course of the research process.

Associative Processing Implemented With Content-Addressable Memories, Luis Sergio Kida

Dissertations and Theses

The associative processing model provides an alternative solution to the von Neumann bottleneck. The memory of an associative computer takes some of the responsibility for processing. Only intermediate results are exchanged between memory and processor. This greatly reduces the amount of communication between them. Content-addressable memories are one implementation of memory for this computational model. Associative computers implemented with CAMs have reported performance improvements of three orders of magnitude, which is equivalent to the performance of the same application running in a conventional computer with clock frequencies of the order of GHz. Among the benefits of content-addressable memories to the …

Computer-Based Parameter Visualization And Decision Making For The Detection And Prediction Of Ovulation: The Ovulo-Computer, Omar Rodolfo Bermudez

Dissertations and Theses

It is now well accepted by gynecologists that a woman can conceive from an act of intercourse for a maximum of seven days of her menstrual cycle [1]. The reliability of natural family planning methods depends on identifying this window of fertility without ambiguity. Several natural family planning (NFP) methods have been used extensively and with some success. For decades, cycle length and BBT history have been used to forecast the most likely days of ovulation. When greater precision is needed, serum LH assays or ultrasound techniques are used. With the recent development of enzyme-linked immunosorbent assay, various kits have …

Cathodoluminescence Of Gaas, Tyler Smith

Electrical & Computer Engineering Theses & Dissertations

Cathodoluminescence of band-gap radiation across the bulk of a proposed semiconductor switch has been studied. Such a device relies on the efficient use of cathodoluminescence to modulate the conductivity of the switch. Diagnostics were configured to measure the intensity of band-gap radiation across the bulk of several switch samples. The measured results were compared to calculations based on a four energy level band-gap model which included two deep levels EL2 and HL10.

Conceptual Design Of Dual Cam Mechanisms Using Graph Theory, Raymond Lee Mcclendon

Mechanical & Aerospace Engineering Theses & Dissertations

This paper presents the theory of graphs and how they can be applied to the conceptual design of dual-cam mechanisms. The graph theory was used to validate the results of previous authors (Hain and Pryor). Several applications of dual cam mechanisms are reviewed.

Algorithms using a process of bit mapping were used to developed all possible non-isomorphic graphs for various classes of mechanisms. A classification method was developed using common occurring substructures found in the graphs. This classification scheme was used for conversion of graphs into schematics. Once the results of Hain were verified, the investigation turned to mechanisms with …

An Experimental And Analytical Investigation Of Wing Flutter On A Trial Rotor V/Stol Aircraft, David L. Soistmann

Mechanical & Aerospace Engineering Theses & Dissertations

A wind tunnel model based on a trail rotor vehicle concept was tested for wing flutter in the subsonic flow regime. The wind tunnel model was flutter tested in the forward flight mode only. From this test it was determined that this conceptual vehicle may be susceptible to wing flutter. However, the flutter encountered was not catastrophic but was of the limited amplitude type. The trailing rotor blades were found to have a positive aerodynamic damping effect on flutter. The flutter mechanism for each flutter point was due to a coupling of the first wing bending and first wing torsion …

Investigation Of Radiative Interactions In Supersonic Chemically Reacting Channel Flows, Almuttil M. Thomas

Mechanical & Aerospace Engineering Theses & Dissertations

Analyses and numerical procedures are presented to investigate the radiative interactions of absorbing emitting species in chemically reacting supersonic flow in various ducts. The two-dimensional time dependent Navier-Stokes equations in conjunction with radiative flux equation are used to investigate supersonic flows undergoing finite rate chemical reaction in a hydrogen air system. The specific problem considered is the flow of premixed radiating gas between parallel plates. Specific attention is directed in investigating the radiative contribution of H2O, OH and NO under realistic physical and flow conditions. Results are presented for the radiative flux obtained for different gases and for various combination …

Integrated System Identification And Adaptive State Estimation For Control Of Flexible Space Structures, Chung-Wen Chen

Mechanical & Aerospace Engineering Theses & Dissertations

Accurate state information is crucial for control of flexible space structures in which the state feedback strategy is used. The performance of a state estimator relies on accurate knowledge about both the system and its disturbances, which are represented by system model and noise covariances respectively. For flexible space structures, due to their great flexibility, obtaining good models from ground testing is not possible. In addition, the characteristics of the systems in operation may vary due to temperature gradient, reorientation, and deterioration of material, etc. Moreover, the disturbances during operation are usually not known. Therefore, adaptive methods for system identification …

The Solution Of A Singular Integral Equation Arising From A Lifting Surface Theory For Rotating Blades, Mark H. Dunn

Mathematics & Statistics Theses & Dissertations

A technique is presented for the solution of a linear, two dimensional, singular, Volterra integral equation of the first kind. The integral equation, originally developed by Farassat and Myers, is derived from the basic equations of linearized acoustics and models the lifting force experienced by an infinitesimally thin surface moving tangent to itself. As a particular application, the motion of modern high speed aircraft propellers (Advanced Technology Propellers) is considered. The unknown propeller blade surface pressure distribution is approximated by a piecewise constant function and the integral equation is solved numerically by the method of collocation. Certain simplifying assumptions applied …

On Shock Capturing For Liquid And Gas Media, Tze Jang Chen

Mathematics & Statistics Theses & Dissertations

The numerical investigation of shock phenomena in gas or liquid media where a specifying relation for internal energy is absent poses special problems. Classically, for gas dynamics the usual procedure is to employ a splitting scheme to remove the source terms from the Euler equations, then up-wind biased shock capturing algorithms are built around the Riemann problem for the system which remains. However, in the case where the Euler equations are formulated in the term of total enthalpy, a technical difficulty associated with equation splitting forces a pressure time derivative to be treated as a source term. This makes it …

Parallel-Vector Design Sensitivity Analysis In Structural Dynamics, Yongxing Zhang

Civil & Environmental Engineering Theses & Dissertations

In this study, the design sensitivity analysis is for the purpose of providing constraint derivative information for structural optimization under dynamic loads. Various existing formulations are reviewed, and the direct differentiation method is justified as the best one for design sensitivity analysis in structural dynamics. An alternative formulation for design sensitivity analysis with direct differentiation method is developed. The alternative formulation works efficiently with the reduced system of dynamic equations, and it eliminates the need for expensive and complicated eigenvector derivatives, which is required in the existing reduced system formulation. The relationship of the alternative formulation and the existing reduced …

Application Of Sensitivity Analysis To The Euler Equations, Vamshi Mohan Korivi

Mechanical & Aerospace Engineering Theses & Dissertations

An approximation method is presented for efficiently predicting the changes which occur in a steady-state numerical solution of the Euler equations as a consequence of a small change in the geometric shape of the domain. The method is extended to develop a general procedure for calculating aerodynamic sensitivity derivatives with respect to variations of geometric shape. The techniques are implemented using an upwind cell centered finite volume formulation, and are applied to two test cases, (1) a subsonic nozzle (M_∞ = 0.85), and (2) a supersonic inlet (M_∞ = 2.0). Conventional numerical solutions are first obtained for flow …

Finite Element Analysis Of Nonlinear Panel Flutter Of Rectangular Composite Plates Under A Uniform Thermal Load, Lain Ross Dixon

Mechanical & Aerospace Engineering Theses & Dissertations

A finite element formulation is developed to analyze large-amplitude panel flutter of arbitrarily laminated composite plates subjected to a uniform temperature change. The plates considered are anisotropic composite, thin rectangular panels. The aerodynamic pressure load is modeled through the use of the first-order piston theory. The equations of motion for the oscillating plate are determined from the principle of virtual work. Two different solution procedures are given to determine the panel motions. The first procedure, which considers only the aerodynamic load, solves the panel limit-cycle motions by employing the linearized updated-mode with a nonlinear time function (LUM/NTF) approximation. The second …

Dynamic Test/Analysis Correlation Using Reduced Analytical Models, Paul E. Mcgowan

Mechanical & Aerospace Engineering Theses & Dissertations

Test/analysis correlation is an important aspect of the verification of analysis models which are used to predict on-orbit response characteristics of large space structures. This thesis summarizes the study of using reduced analysis models for performing dynamic test/analysis correlation. The reduced test-analysis model (TAM) has the same number of degrees-of-freedom (DOF) as the number of test measurements. This allows the direct comparison of modal parameters between ground vibration test results and finite element model (FEM) analysis results. The TAM can also be used for pre-test analysis and to aid in the post-test mathematical model updating process.

Herein, four methods for …

Simulation And Measurement Of The Radiant Field Produced By Quartz Heating Systems, Travis Lee Turner

Mechanical & Aerospace Engineering Theses & Dissertations

A method is developed for predicting the radiant heat flux distribution produced by tungsten-filament tubular quartz heating systems with reflectors. The method is an application of Monte Carlo simulation, which takes the form of a ray tracing or random walk scheme. The method is applied to four systems of increasing complexity including; a single unreflected lamp, a single lamp with a flat reflector, a single lamp with a parabolic reflector, and up to six lamps in a six-lamp contoured reflector heating unit. The general methodology of the Monte Carlo method is discussed and applied to the simulation of thermal radiation. …

Purification And Characterization Of The Prostate Cancer-Associated Antigen: 7e11-C5, Qi Feng

Theses and Dissertations in Biomedical Sciences

A murine monoclonal antibody (MAb), 7E11-C5, recognizes a prostate organ-specific antigen. Under reducing conditions, the 7E11-C5 antigen exhibited major 100-Kd and minor 70-Kd bands, suggesting that the antigen comprises two peptide chains. The antigen was detected in pooled normal human seminal plasma, xenograft tissue extract of a prostate adenocarcinoma cell line, LNCaP, and tissue extracts of benign prostatic hyperplasia (BPH) and prostate carcinomas, but was not identified in any of the non-prostate tissue extracts tested. Antibodies of the three major prostate-associated antigens (prostatic acid phosphatase (PAP), prostate specific antigen (PSA) and prostate secretory protein (PSP)) were unable to block the …

A Robust Approach To Human-Computer Interface Design Using The Taguchi Method, Billie Mitchell Reed

Engineering Management & Systems Engineering Theses & Dissertations

The application of Dr. Genichi Taguchi's approach for design optimization, called Robust Design, to the design of human-computer interface software is investigated. The Taguchi Method is used to select a near optimum set of interface design alternatives to improve user acceptance of the resulting interface software product with minimum sensitivity to uncontrollable noise caused by human behavioral characteristics.

Design alternatives for interaction with personal micro-computers are identified. Several important and representative alternatives are chosen as design parameters for the Taguchi matrix experiment. A noise field with three human behavioral characteristics as noise factors were chosen as a representative noise array. …

Parallel-Vector Computation For Geometrically Nonlinear Frame Structural Analysis And Design Sensitivity Analysis, Majdi A. Baddourah

Civil & Environmental Engineering Theses & Dissertations

Parallel-vector algorithms are presented for solving the geometrically nonlinear structural problems and obtaining design sensitivity information. A new algorithm is also presented for parallel generation and assembly of the finite element stiffness and mass matrices. The presented assembly algorithm is based on a node-by-node approach rather than the more conventional element-by-element approach. Three different methods, Newton Raphson, Modified Newton Raphson, and the BFGS, are used in the analysis of the nonlinear structural problems. A study is made to determine the performance of each of the mentioned methods in a parallel-vector computer environment. Medium to large-scale, practical problems are solved to …

An Experimental Study On Anisotropic Behavior Of Granular Materials, Jong Woon Choi

Civil & Environmental Engineering Theses & Dissertations

Two types of mixtures of glass bead assemblies (large beads and small beads) were used to investigate the source of the anisotropy of granular materials in volume change behaviors during shearing process. Most tests (7 series) were conducted in the conventional triaxial device while a series of the experiments were in the hollow cylinder test device. All the specimens were first isotropically consolidated up to 137.9 kPa and were subjected to shearing in triaxial compression and triaxial extension modes with a constant effective mean normal stress (137.9 kPa). The test results indicated that all the specimens had a strong but …

A Comparative Analysis Of The Efficacy Of Zero-Order, First-Order And Monod Kinetic Models In Representing Raw Aerobic Biodegradation Data, Andrew I. Bakun

Theses

A total of 148 raw aerobic biodegradation data sets from batch and continuous stirred-tank reactors were extracted from the open literature and previous NJIT MS theses. Kinetic analysis of each of these data sets was performed with respect to the following commonly used empirical models: (1) zero-order, (2) first-order, and (3) Monod. Two constant-biomass versions of each model were evaluated; one in which So (i.e., the boundary condition for substrate concentration at time equal to zero) was assumed to be equal to the measured value of the initial substrate concentration and the other in which So was treated as a …

Simulation Study Of Signal Coupling For Monolithic Gaas 8-12 Micron Direct Injection Mqw Image Sensor, Lei Zhang

Theses

The simulation of signal coupling for a single pixel of a monolithic 8-12 micron GaAs/A1GaAs direct injection MQW infrared image sensor with 100% fill factor has been performed by using PISCES-IIB and PSPICE simulators. A vertical structure with the readout circuit built on the back of MQW was adopted for simulations. Both the static and transient characteristics were analyzed by simulation. The simulation was used to verify the doping profiles and device parameters for the n-GaAs MESFETs used in the read-out circuit.

The simulation result is as follow:

(1) A 900A thick p-GaAs (p=10¹⁶/cm3) substrate for GaAs MESFETs …

Cognitive Learning Styles And Their Relation To Air Traffic Control Screening And Training, Vincent P. Galotti

Master's Theses - Daytona Beach

The purpose of this study was to show a relationship between the type of cognitive learning style that an individual possesses and their subsequent success at simulated air traffic control practical exercises. Kolb's Learning Style Inventory was utilized to determine dominant learning styles of 30 college students enrolled in a laboratory-based air traffic control course. The instrument was administered during the first day of classes in the Fall of 1990. Students were placed in one of four groups for statistical purposes according to learning style. The scores of simulated micro-computer based air traffic control practical exercises given at semester's end …