Engineering Commons^™

The Effects Of Electron Radiation On The Glass Transition Temperature Of A Polyetherimide, Kristen Tulloch Kern

Physics Theses & Dissertations

The effects of electron radiation on a polyetherimide (PEI), Ultem*, were investigated. In particular, the changes in the glass transition temperature (T_g) with absorbed radiation dose were studied. The polymer was exposed to mono-energetic beams of 100-keV electrons and 1.0-MeV electrons for doses up to 100 megagray (MGy). Dosimetry for the exposures was based on Monte-Carlo simulations of the transfer of energy from an energetic electron to the polymer and on comparison to Nylon standards. Dynamic mechanical analysis was used to determine the (T_g) for non-exposed PEI and the changes in (T_g) resulting from …

Recognition Of Quadric Surfaces From Range Data: An Analytical Approach, Ivan X. D. D'Cunha

Electrical & Computer Engineering Theses & Dissertations

In this dissertation, a new technique based on analytic geometry for the recognition and description of three-dimensional quadric surfaces from range images is presented. Beginning with the explicit representation of quadrics, a set of ten coefficients are determined for various three-dimensional surfaces. For each quadric surface, a unique set of two-dimensional curves which serve as a feature set is obtained from the various angles at which the object is intersected with a plane. Based on a discriminant method, each of the curves is classified as a parabola, circle, ellipse, hyperbola, or a line. Each quadric surface is shown to be …

Resource Utilization Model For The Algorithm To Architecture Mapping Model, Rakesh R. Patel

Electrical & Computer Engineering Theses & Dissertations

The analytical model for resource utilization, and the variable node time and conditional node model for the enhanced ATAMM model for a real-time data flow architecture, is presented in this research. The Algorithm To Architecture Mapping Model, ATAMM, is a Petri net based graph theoretic model developed at Old Dominion University, and is capable of modeling the execution of large-grained algorithms on a real-time data flow architecture. Using the resource utilization model, the resource envelope may be obtained directly from a given graph and, consequently, the maximum number of required resources may be evaluated. The node timing diagram for one …

Robust Control Of Nonlinear Multibody Flexible Space Structures, Atul G. Kelkar

Mechanical & Aerospace Engineering Theses & Dissertations

A generic nonlinear math model of a multibody flexible system is developed. Asymptotic stability of such systems using dissipative compensators is established. It is proved that, under certain conditions, this class of systems exhibit global asymptotic stability under dissipative compensation. The dissipative compensators considered are static as well as dynamic dissipative compensators. The stability proofs are based on passivity approaches, Lyapunov methods, as well as a key property of such systems, i.e., skew-symmetricity of certain matrix. The importance of the stability results obtained is that the stability is robust to parametric uncertainties and modeling errors.

For static dissipative compensators, it …

Monolithic Silicon Opto-Electro-Mechanical Light Modulator, Ching-Horng Wu

Theses

A Fabry-Perot light beam modulator of the reflection-type has been designed with process and performance parameters optimized. This design takes advantage of the economies of surface micromaching using silicon substrates and selected thin films. High performance with a low drive voltage are achieved using electrostatic actuation of a thin polysilicon diaphragm. The diaphragm is a novel corrugated structure which has maximum compliance and maintains planarity during actuation. In addition, the corrugationsuspension used provides an improved linearity of amplitude modulation response as a function of the actuation voltage.

A preliminary version of this device has been fabricated through a contract foundry …

Patient Scheduling And Aircraft Routing For Strategic Aeromedical Evacuation, Michael J. Loftus

Theses and Dissertations

The objective of this study is to develop an approach that would assign patients to aeromedical evacuation aircraft and route each aircraft to a single CONUS airport. The goal is to minimize total patient wait time. A heuristic algorithm is developed which exploits the structure of the problem. The first subproblem solved is the assignment of aircraft to airports. This subproblem is solved using integer programming and the results are input into the second subproblem. The second subproblem is the patient to aircraft assignment problem. This subproblem minimizes patient wait time and is solved using network flow programming. The two …

An Investigation Of Graphite Peek Composite Under Compression With A Centrally Located Circular Discontinuity, Benjamin Wham Ii

Theses and Dissertations

The purpose of this thesis was to determine (both experimentally and analytically) the initiation and progression of failure, stress-strain response, and the failure loads of Graphite/Polyetheretherketone (Gr/PEEK) laminates, incorporating a centrally located circular discontinuity, loading in axial compression at room temperature. The laminates studied were (0°)₁₆,(90°)₁₆, (0°/90°)_4S, (± 45°)_4S, and (0°/±45°/90°)_2S. The specimens were loaded within a Boeing Open Hole Compression Fixture. The micromechanical failure modes were identified using a Scanning Electron Microscope. The analytical progression of failure was predicted using a nonlinear finite element code developed by Dr. R.S. …

Spartan Ii: An Instructional High Resolution Land Combat Model, Edwin H. Harris Jr.

Theses and Dissertations

This project improved SPARTAN, a high resolution land combat model demonstrator. SPARTAN was originally developed as a hands-on trainer for land combat modeling students because there were no models specifically designed to teach the analysts how the models function. SPARTAN is built to demonstrate the techniques used in the current generation of US Army high resolution models. Like the original, the model is primarily a small scale attrition (both direct and indirect fire) model. The model represents 12 soldiers involved in the following processes: target search, target selection, direct fire engagement, indirect fire engagement, movement, reaction to fire, obstacle breaching, …

The Airlift Capabilities Estimation Prototype: A Case Study In Model Validation, Randy Mccanne

Theses and Dissertations

This study investigates the application of a life cycle approach to the validation of operational models. The classic waterfall life cycle from software engineering is adapted for use on mathematical models by defining four stages of model development. Each stage is discussed in detail and examples of the output from each stage are presented. In addition, techniques are investigated for applying the proposed life cycle to existing models through the recovery of life cycle stages. The methodology is applied to a linear programming model developed for planning airlift operations to demonstrate the power of the life cycle approach to validation. …

Theater Airlifter Survivability On The Ground, Michael A. Silver

Theses and Dissertations

Airlifter attrition can severely decrease the throughput of cargo during extended airlift operations. Much work has been done to enhance the tactical airlifter survivability in the air but little study has gone into airlifter survivability on the ground. This thesis develops a method to measure the threat to parked aircraft from ground weapons. Specific scenarios cover airlifter mobility on the ground, time to off-load cargo, short-field takeoff capability and attack by infantry weapons. A weapon is examined at each of several firing ranges to target. The threat to the aircraft is measured as the probability that the aircraft is hit. …

A Comparison Of Variable Selection Criteria For Multiple Linear Regression: A Second Simulation Study, David P. Woollard

Theses and Dissertations

This thesis implements a variable selection method proposed by Alan J. Miller, and makes an extension of Ross J. Hansen's 1988 thesis research by comparing the methods he examined: Minimum MSE, Minimum Sp, and Minimum Cp with Miller's method. Response Surface methodology is employed with two performance measures: the percentage of correct variables in a model and the Theoretical Mean Squared Error of Prediction (TMSEP). Each technique is applied on generated data with known multicollinearities, variances, random predictors, and sample sizes. Both performance measures are computed for models selected under each technique. A full factorial design using each performance measure …

An Analysis Of Tactical Airlifter Characteristics And Their Impact On Theater Airlift System Performance, John J. Koger

Theses and Dissertations

This study used computer simulation and Response Surface Technology to determine what tactical airlifter characteristics most impact theater airlift system performance in a Southwest Asia (SWA) scenario. Some Aircraft characteristics were grouped into functional sets, while others were considered individually. After screening one characteristic, reliability, with a two-level factorial experiment, a Box-Behnken design was used to estimate second-order metamodels. A stepwise regression procedure indicated that, if attrition rates are ignored, airlift system performance is most impacted by the aircraft's size, survivability, cruise speed, and ability to operate on short fields. The SWA scenario used in this study covers a large …

Estimating Test Range Capacity, Paul A. Mcdaniel

Theses and Dissertations

The main focus of this thesis effort was to develop a means to estimate the capacity of the test range complex at Eglin AFB, Florida. For the purposes of this study, test range capacity was defined as the maximum number of missions, of a given set, that could possibly be supported by range resources on any given day. In trying to determine this number, the complexities of the overall multi-resource constrained scheduling problem dictated a more practical approach be taken in modeling the allocation process of range resources to test missions. Therefore, a series of three single-resource, 0-1 integer programming …

Mitigation Of Shock Waves In A Cylindrical Tunnel By Foam, Grant W. Fondaw

Theses and Dissertations

This study investigated the effectiveness of foam linings in mitigating shock waves in tunnels. A polyurethane foam liner of varying density, crush strength and thickness was modeled inside a 1 meter radius tunnel and an explosion of 1.25 kg of plastic explosive was simulated. Using CTH, an Eulerian- Lagrangian hydrodynamics code from Sandia National Laboratories, the overpressures were computed and compared graphically to determine the effect of varying each foam parameter. The walls of the tunnel consisted of a perfectly reflecting boundary, and in some cases, a foam liner. Low density foam provided the most shock attenuation. with a 20 …

Using Animation In The Validation Of Simulation Models, Michael L. Carpenter

Theses and Dissertations

This study examined three aspects of animation (movement, color, and detail of icons) to determine which one (or ones) best communicated the operation of a simulation model. The procedure was done in the context of using animation to establish a model's face validity. Movement, color, and detail of icons were looked at individually and in combination. The ability to communicate was measured both subjectively and objectively. The subjective measures were a selection of best and worst animation types where best and worst referred to how well an animation communicated, and a pairwise comparison of the animation types which resulted in …

Luminescence Study Of Ion-Implanted And Mbe-Grown Er-Doped Gaas And AlXGa1-XAs, Jose E. Colon

Theses and Dissertations

The excitation and de-excitation mechanisms of the 1.54 microns emissions, from ion implanted and MBE grown GaAs:Er and Al_xGa_1-xAs:Er, were studied through luminescence experiments. Experimental techniques included photoluminescence, time resolved photoluminescence, and selective excitation photoluminescence. The Er³⁺ emissions were studied as a function of Er concentration, aluminum mole friction, n- and p-type doping level, and annealing temperature. In addition oxygen co-doping studies were done in order to determine the role played by oxygen in the Er³⁺ luminescence.

Hoph Bifurcation In Viscous, Low Speed Flows About An Airfoil With Structural Coupling, Mark J. Lutton

Theses and Dissertations

The locations of Hopf bifurcation points associated with the viscous, incompressible flow about a NACA 0012 airfoil with structural coupling are computed for very low Reynolds numbers (<2000). A semi-implicit, first-order-accurate time integration algorithm is employed to solve the stream function-vorticity form of the Navier-Stokes equations. The formulation models the inclusion of simple structural elements affixed to the airfoil and captures the resulting airfoil motion. The equations describing the airfoil motion are integrated in time using a fourth-order Runge-Kutta algorithm. The dissertation is divided into two parts. In part one, numerical experiments are performed in the laminar regime to determine if the structural model of the airfoil has an effect upon the location of the Hopf bifurcation point when compared with the fixed airfoil. Results are reported for a variety of structural characteristics, including variations of torsional and linear spring constants, inertial properties, structural coupling, and structural damping. The structure of the solution space is explored by means of phase plots. In part two, the Baldwin-Lomax turbulence model is implemented to model turbulent flow. A numerical effort is made to predict the onset of unsteady flow.

Design Of A Hardware Discrete Event Simulation Coprocessor, David W. Daniel

Theses and Dissertations

A hardware discrete event simulation (DES) coprocessor was designed to eliminate synchronization overhead as a possible bottleneck. The target architecture is an eight node Intel iPSC/2 Hypercube, but this design has application to future CPU designs that wish to incorporate on-chip architectural features to better support parallel processor synchronization. A structural description of a general-purpose DES hardware coprocessor is given with approximately 90 percent of the components written at the gate level. The remaining components use low-level behavioral descriptions. While the DES coprocessor microcode implements the Chandy-Misra protocol, general-purpose support for a wide-range of protocols was a primary hardware design …

Rendering The Out-The-Window View For The Afit Virtual Cockpit, W. Dean Mccarty

Theses and Dissertations

The Air Force Institute of Technology (AFIT) is developing a distributed interactive flight simulator, the Virtual Cockpit, using commercial graphics workstations and helmet mounted displays. The Virtual Cockpit communicates with other simulators via local and long-haul networks using the SIMNET protocol. The work reported in this thesis focuses on developing the terrain database for the synthetic environment and on rendering the pilot's view of the database. There are many different file formats for describing 3- dimensional geometric polygonal objects. An analysis of three formats, AFIT GEOM, the Naval Postgraduate School (NPS) DRP, and Software Systems' Flight, is presented. Each file …

Self-Referenced Speckle Holography (Srsh) Image Reconstruction Performance, John R. Devey

Theses and Dissertations

The Speckle Holography technique uses a series of short exposure images and associated wave front sensor measurements to reconstruct astronomical images. The reconstruction technique effectively boosts the amplitude of high spatial frequencies to allow for finer resolution of astronomical objects. A simulation package that calculates the optical transfer function (OTF) of a telescopic system was previously developed for the Phillips Laboratory. This software was modified slightly to provide the Speckle Holography system transfer function (STF) for a telescopic system under varying seeing conditions.

Frequency Domain Speech Compression Using The Karhunen-Loeve Transform, Donald W. Dryley

Theses and Dissertations

The purpose of this study was test the influence of phase on the quality of speech reproduced by a speaker dependent compression system. The tests consisted of compressing frequency domain speech vectors using the Karhunen-Loeve Transform, with and without phase, then making subjective judgements as to the reproduced quality. Error Metrics were then tested for their suitability as predictors of reproduced quality. The compression software transformed each speech vector into a vector of complex Fourier coefficients (only half of the coefficients are needed as transform is hermitian). Phase was preserved by using the real frequency components to form one vector …

Analysis Of Topaz Ii And Space-R Space Nuclear Power Plants Using A Modified Thermionic Model, Otto D. Habedank

Theses and Dissertations

Models based on the TDS thermionic diode model were developed for TOPAZ II and SPACER nuclear power systems. Several parameter studies were conducted with the TOPAZ II model. These determined system performance and efficiency while varying the following: (1) Coolant flow inlet temperatures. (2) Rate of coolant temperature change. (3) Power profile of the core. (4) Cesium reservoir temperature. Analysis of results indicate the model accurately represented the TOPAZ II system, underestimating published data by 10%. Coolant flow studies indicate that raising coolant temperatures up to 100 K higher increases system power by up to 5%. Additional increases in temperature …

Amplification Of Shock Overpressure By Reflection Within Concave Corners, John E. Loftis

Theses and Dissertations

In this study, CTH, a production hydrodynamics code developed and provided by Sandia National Laboratories. modeled the interaction of a shock wave with tall V-shaped buildings with various wall lengths and vertex angles. The purpose of this study was to determine the degree to which the length and vertex angle affect the peak overpressure at the vertex. CTH performed two- dimensional Eulerian-Lagrangian computations to obtain solutions of this problem. The models were cast in two-dimensional rectangular geometry on a horizontal plane because of the computational costs of three-dimensional calculations. This geometry simulates tall buildings exposed to a tall Mach stem …

Afitbunki: A Modified Iterative Code To Unfold Neutron Spectra From Bonner Sphere Detector Data, Sean C. Miller

Theses and Dissertations

The neutron spectrum unfolding code BUNKI, developed at the Naval Research Laboratory in 1983, was modified to incorporate a finer energy group structure, seven initial-guess spectra, and new dose conversion factors. The modified code, AFITBUNKI, unfolds spectra into 54 energy groups between 10^-7 and 14.92 MeV. The code calculates fluence, absorbed dose, percent of effective dose equivalent, and percent of ambient dose equivalent as a function of neutron energy. Additionally, AFITBUNKI calculates total energy-integrated fluence (Φ), absorbed dose (D), dose equivalent (H), effective quality factor (Q), ambient dose (D*), both ICRP Publication 26- and ICRP Publication 60-based ambient dose …

Construction And Testing Of A Neutron And Gamma Spectrometry System Using Pulse Shape Discrimination With An Organic Scintillator, Robert S. Pope

Theses and Dissertations

The goal of this thesis was to construct and test a neutron detector to measure the energy spectrum of 1 to 14-MeV neutrons in the presence of gammas. A spectrometer based on the process of pulse shape discrimination (PSD) was constructed, in which the scintillator NE-213 was used. The primary neutron/ gamma sources used were 78-mCi and 4.7-Ci ²³⁹PuBe sources, while 4.7-µCi and 97.6-µCi ²²Na gamma sources were used for energy calibration and additional testing of the detector. Proton recoil spectra and Compton electron spectra were unfolded with the neutron and gamma unfolding code FORIST to generate the …

Identification Of Significant Outliers In Time Series Data, Keri L. Robinson

Theses and Dissertations

This thesis examines the feasibility of using least median of squares (LMS) procedure applied to a reweighted least squares (RLS) autoregression model to identify significant outliers in time series data. The time series were analyzed for data points that were outliers. In order to perform detailed analysis on an outlier. the analyst must be able to determine that an outlier data point is significantly different from normally distributed data. This thesis examines a new method for identifying these outliers. Data from the field were characterized and fit with time series models using an autoregressive reweighted least squares routine (ARRLS) derived …

Cost Constrained Improvements To The Military Retirement System, Cynthia A. Brown

Theses and Dissertations

This research studies possible changes to the current military retirement system. The current military retirement system refers to the system provided under the Military Reform Act of 1986, A new system is proposed which would provide the retiree with four options. Option 1 would provide a pay annuity and medical benefits to the retiree (this is the current system). Option 2 would provide a pay lump sum in place of the, annuity and would offer medical benefits. Option 3 would offer the pay annuity but give a medical lump sum amount in place of the medical benefit. Finally, option 4 …

Predicting The Productive Capacity Of Air Force Aerospace Ground Equipment Personnel Using Aptitude And Experience Measures, Robert S. Faneuff

Theses and Dissertations

This study investigated the effects of mechanical aptitude and job experience on the job performance of 204 Air Force Aerospace Group Equipment (AGE) mechanics. Job performance was expressed as productive capacity (PC), which is derived from estimated performance times on job tasks. PC measures were derived for 50 tasks typically performed by airmen in the specialty. Aptitude measures took the form of Mechanical percentile composite scores on the Armed Services Vocational Aptitude Battery (ASVAB). A second-order logistic model was used to regress PC on aptitude and experience at the task level and at the overall job, or aggregate, level. Model …

Modified Anderson-Darling And Cramer-Von Mises Goodness-Of-Fit Tests For The Normal Distribution, David A. Gwinn Sr.

Theses and Dissertations

New techniques for calculating goodness-of-fit statistics for normal distributions with parameters estimated from the sample are investigated. Samples are generated for a Normal(0,1) distribution. Critical values are calculated for five modifications to the Anderson-Darling statistic and five modifications to the Cramer-Von Mises statistic. An extensive power study is done to test the power of the new statistics versus the power of the unmodified statistics. Powers of six of the new statistics show minimal to no improvement, two of the new statistics show a marked decrease in power, and two of the new statistics show an overall increase in power over …

Automating The Satellite Range Scheduling Process, Timothy D. Gooley

Theses and Dissertations

Satellite range scheduling is a complex problem that involves scheduling satellite supports in which a satellite and a specific remote tracking station are assigned a time window during which they communicate with each other. As the number and complexity of satellite supports continue to increase, more pressure is placed on the current manual system to efficiently generate a schedule. The objective of this research was to develop a methodology that will automate the generation of the initial 24 hour schedule. The goal of the algorithm developed was to schedule as many conflict free supports as possible. A two phased approach …