Engineering Commons^™

Optimization-Based Power Management For Hybrid Towing Vessels: A Comparative Framework Toward Mission-Aware Control, Rachel K. Burchill

LSU New Orleans Theses and Dissertations

This thesis presents an optimization-based framework for power management in hybrid towing vessels operating under dynamic mission conditions. A physically consistent modeling approach is developed, incorporating battery state-of-charge dynamics (SOC), unified power flow, and operational constraints. The framework evaluates rule-based control using fixed heuristic thresholds, Particle Swarm Optimization (PSO), Genetic Algorithm (GA), and multi-objective Non-Dominated Sorting Genetic Algorithm II (NSGA-II) under a representative harbor-assist mission profile. Results show that optimization-based methods significantly outperform rule-based control. PSO achieves the lowest fuel consumption and near-perfect tracking with minimal battery use, while GA provides balanced performance with moderate battery utilization. NSGA-II reveals a …

An Alternative To Armageddon: O.P. Weyland And The Development Of Tactical Air Power, Paul Wells

LSU New Orleans Theses and Dissertations

Theorists and advocates of air power argued that aircraft, not ground forces, would become the dominant platform for victory in war. They promoted the concept of strategic bombing, using aircraft to bypass ground forces and directly attack a nation's industrial capacity to wage war, hoping to ensure quick victory and avoid a repeat of the prolonged slaughter in the trenches of WWI. In 1947, led by advocates of strategic bombing, the United States Air Force (USAF) became an independent and equal branch of the U.S. military. The USAF developed the Strategic Air Command (SAC) to meet the requirements of the …

Power System Small-Signal Stability Migration And Metric Trends In A Test System With Increasing Ibr Penetration, Brandon Marshall

LSU New Orleans Theses and Dissertations

With the increasing demand of cleaner energy, inverter-based resources (IBRs) provide a greener alternative to traditional generation methods. IBRs fundamentally work different from traditional generators, though, and power system stability will change as IBRs are integrated into the system. The limitations of IBRs include providing less reactive power support to the system and lacking a spinning rotor for inertia to dampen disturbances. This study examines how small-signal stability is impacted when increasing IBR penetration on a test system. Stability impacts are realized by the migration of eigenvalues and relationships between power system metrics and small-signal stability metrics.

Autonomous Deficiency Detection And Vision-Language Summarization For Underground Infrastructure On Embedded Edge Systems, Johny Lopez

LSU New Orleans Theses and Dissertations

Aging underground infrastructure poses significant risks to public health and environmental safety, yet structural condition assessment remains bottlenecked by labor-intensive manual CCTV inspections. This thesis proposes a comprehensive algorithmic framework enabling fully autonomous, real-time deficiency detection, geometric assessment, and natural language reporting on resource- constrained edge computing platforms. Three core components address this challenge. First, RAPID-SCAN, a novel semantic segmentation architecture utilizing a Dynamic Feature Pyramid Network and Channel-Spatial Attention, achieves real-time, pixel-precise defect localization with dramatically reduced parameters. Second, an Edge-Optimized Vision-Language Model pipeline employing LoRA and 4-bit QLoRA quantization compresses Phi-3.5 for local deployment, en- abling autonomous technical …

Database State Reconstruction And Audit Log Reconciliation For Data Systems Security, Mahfuzul I. Nissan

LSU New Orleans Theses and Dissertations

Modern organizations rely on diverse database management systems to store critical data across heterogeneous storage architectures. These platforms complicate forensic investigations because database engines vary profoundly in their layouts, encodings, and update policies. Malicious insiders can exploit this architectural opacity to alter data and disable audit logging undetected, leaving investigators with an untrusted view of database activity. Furthermore, building custom forensic solutions for every database version is fundamentally unscalable.

This dissertation advances data-system security through a tamper-aware, cross-layer framework that reconstructs database states and detects unauthorized operations even when audit logs are manipulated. By unifying the analysis of physical storage …

Comparative Analysis Of Secure Messaging Systems: Peer-To-Peer Vs Client-Server Architecture, Maddie Luth

Theses/Capstones/Creative Projects

This research serves as an honors extension of a capstone project sponsored by Northrop Grumman, focused on the development of a secure messaging application, LockTalk. The study evaluates the performance of peer-to-peer and client-server network architectures within a messaging system. It compares these architectures based on key factors such as security, privacy, and reliability. The results are used to determine the most suitable architecture for implementation in LockTalk, with particular emphasis on protecting sensitive communications. This work highlights the trade-offs involved in selecting a network architecture and provides guidance for developing secure and efficient messaging platforms.

Cationic Polymer-Grafted Magnetic Nanoparticles For Enhanced Removal Of Anionic Dyes From Wastewater, Joia A. Traver

Chemical Engineering Undergraduate Honors Theses

Water scarcity and pollution are escalating global challenges, with textile industry wastewater often enriched with toxic dyes posing significant risks to environmental and human health. These contaminants increase turbidity, reduce dissolved oxygen levels, and ultimately impair aquatic ecosystems. This thesis focuses on the remediation of dye-contaminated water using nanoscale polymeric adsorbents. Methyl orange, a common anionic dye widely used in textile and leather industries, was selected as the model contaminant due to its terminal sulfonate group, which enables strong electrostatic and hydrogen-bonding interactions with cationic functional materials.

In this work, magnetic nanoparticles grafted with cationic polymers were synthesized and evaluated …

Performance Of Zirconia-Based Catalysts For Cold Plasma-Assisted Dry Methane Reforming, Levi Pile

Chemical Engineering Undergraduate Honors Theses

This study investigates the performance of zirconia-based catalysts in non-thermal plasma (NTP)–assisted dry methane reforming (DMR) for synthesis gas (syngas) production. This work explores an alternative pathway for converting carbon dioxide and methane into valuable products under milder conditions than conventional thermal processes. Experiments were conducted in a radiofrequency plasma reactor to evaluate the effects of plasma power, feed flow rate, and reactant ratios on conversion efficiency. The performance of plasma-only conditions was compared with packed-bed systems using zirconia catalysts. Results show that plasma-only systems achieved modest conversion rates (~16.5% for CH₄ and ~12.0% for CO₂), while …

Predicting Personalized Myocardial Fibrosis Response Patterns Using A Mechanistic Signaling Network Model, Jared Noel

Chemical Engineering Undergraduate Honors Theses

Myocardial fibrosis is a key driver of heart failure progression and exhibits substantial patient-to-patient variability, complicating the development of effective personalized therapies. In this study, we present an integrated computational framework that combines a mechanistic signaling network model with patient-specific proteomic data to predict individualized fibrotic responses and therapeutic strategies. Using proteomic measurements from the Framingham Heart Study, we generated personalized baseline states and performed systematic in silico perturbation screens to evaluate candidate drug targets across 132 signaling nodes. Results reveal that while global network response structure is conserved, therapeutic efficacy varies widely between patients in both magnitude and breadth, …

Electrochemical And Mechanical Evaluation Of Cellulose Acetate Electrolyte Films As A Function Of Polyetherimide And Polyethylene Glycol Additives For Supercapacitor Applications, Chase E. Golden

Chemical Engineering Undergraduate Honors Theses

Polymer electrolytes for supercapacitor applications require a balance between mechanical robustness and electrochemical performance. In this study, cellulose acetate (CA) films were modified with additives such as polyetherimide (PEI) and polyethylene glycol (PEG) to test how compositional changes influence mechanical performance, ionic conductivity, and electrochemical charge storage. Films were cast using phase inversion, soaked in a 1 M NaCl aqueous solution, and characterized using Fourier-transform infrared spectroscopy (FTIR), electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and tensile testing. Films were also evaluated based on fluid uptake for insight into electrolyte retention.

Characterizations show that the addition of PEI increased ionic …

Demonstration Of The Relationship Between Irwin Spire Quantity And Boundary Layer Depth In The Chemical Hazards Research Center Wind Tunnel, Jace D. Beckwith

Chemical Engineering Undergraduate Honors Theses

Atmospheric Dispersion Models (ADMs) are computer-based simulations used to model gas releases for enforcing regulatory compliance, designing facilities, and responding to emergencies. Because ADMs rely on complex mathematical models, they require experimental validation to ensure accuracy. Wind tunnels offer a controlled, repeatable method for gathering validation data. The Chemical Hazards Research Center (CHRC) at the University of Arkansas operates an ultra-low speed wind tunnel for this purpose. A key feature of this tunnel is its simulated Atmospheric Boundary Layer (ABL). The simulated ABL is a turbulent layer in which wind speed increases logarithmically with height from near zero at the …

Design Of Aluminum-Air Battery Systems And Optimization Of Cetyltrimethylammonium Bromide And 8-Hydroxyquinoline Additives In Alkaline Electrolytes, Steve Chen

Chemical Engineering Undergraduate Honors Theses

The first portion of this thesis focuses on the design and component optimization of aluminum-air batteries to power a car for the Chem-E-Car competition. A range of separators, cathodes, and current collectors was evaluated to determine the optimal configuration for maximizing output. The resulting system consisted of 1000 series aluminum as the anode, cellulose separators saturated in 1 M potassium hydroxide as the electrolyte, and composite PVDF and graphite as the cathode. The improved batteries achieved a power density of 2.14 x 10^-4 W/cm² and were utilized for the Chem-E-Car competition. The second portion of the thesis investigates …

Enhancing The Leaning Control And Braking Sensation Of A Virtual Reality Vespa Simulator, Joseph Boccuzzi, Wesley Bleck, Jacob Hannebaum

Honors Capstones

The 71 North Partnership Studio located in Northern Illinois University’s Founders Memorial Library has developed a prototype Vespa simulator featuring an interactive Virtual Reality (VR) game and reactive elements. A previous Mechanical Engineering Senior Design team developed the system and improvements after its original development were sought after over the course of the current school year. The system consists of a stationary bike that allows the rider to lean left and right, which in turn causes their in-game character to turn left and right accordingly, simulating the effect of riding a Vespa scooter within a VR environment. Improvements were made …

Optimization Of Stamped Tool Geometry Using Regression-Based Cost Models And Structural Constraints, Matthew J. Teague

Mechanical Engineering Undergraduate Honors Theses

Stamped steel paint can openers are simple tools but still require sufficient strength for the end user and low material consumption for the manufacturer. The goal of this project is to optimize the stamped design of a paint can opener by reducing material cost while maintaining structural rigidity and device performance. This was achieved in part by simplifying the tool’s geometry so that an equation for the mass could be developed analytically and checked against the simulation’s outputs. First, a 25-run design of experiments was created that varied the shaft length and the endloop diameter. Next, a CAD model for …

Design And Verification Of The Multi-Slit Solar Explorer Camera Field Programmable Gate Arrays, Jordan M. Johnson

All Graduate Reports and Creative Projects, Fall 2023 to Present

The Multi-Slit Solar Explorer, or MUSE, is a NASA mission that will take images of the Sun to study solar flares and the solar corona. The mission will provide insight into the mechanisms behind space weather. The mission consists of two cameras: the Spectrograph (SG), and the Context Imager (CI). The Utah State University Space Dynamics Laboratory is providing both cameras for the mission.

This report describes a part of the design and verification process for a central component on these cameras known as the Field Programmable Gate Arrays (FPGAs). These FPGAs are programmed to acquire, handle, and send images …

Spectral Characterization Of Colorectal Cancer Using Excitation-Scanning Hyperspectral Imaging, Natalie Hadad

Honors Theses

Colorectal cancer is one of the most common and deadly cancers worldwide, with a lifetime risk of approximately one in twenty-three for men and one in twenty-five for women. Although early detection significantly improves survival, current diagnostic approaches such as tissue biopsy are invasive, reliant on subjective interpretation, have extended turnaround times, and risk missing flat or depressed lesions that are more difficult to detect than raised polyps. These limitations highlight the need for objective, minimally invasive technologies capable of detecting early tissue changes. This study investigates excitation-scanning hyperspectral imaging (Ex-HSI) as a label-free optical approach for identifying colorectal cancer–associated …

An Efficient Implementation Of Gibbs-Duhem Integration For Solid-Liquid Phase Coexistence In Binary Lennard-Jones System With Relevance To Aav Capsid Separation, Muhi Muntaka

Graduate Theses and Dissertations

Gene therapy using adeno-associated viruses (AAVs) holds promise for treating genetic diseases, but high manufacturing costs limit its widespread use. A major challenge is separating functional (full) AAV capsids from non-functional (empty) ones, which are produced in similar amounts and have nearly identical structures. Conventional purification methods, such as density gradient ultracentrifugation and chromatography, face drawbacks like low yield, poor scalability, and high cost, often requiring multi-step processes. Recently, selective crystallization has emerged as a promising alternative, offering improved efficiency, scalability, and product quality. However, optimizing this method requires a deep understanding of thermodynamic phase behavior in multicomponent systems. In …

A Multi-Criteria Decision And Spatial Modeling Framework For Socially Informed Advanced Air Mobility Implementation Planning, Noah Wesley Bretz

Graduate Theses and Dissertations

Advanced air mobility (AAM) is an emerging mode of transportation that integrates advanced aircraft technologies, such as manned air taxis or unmanned freight drones, to transport people and goods across urban and regional environments. While these technologies promise to transform mobility, successful implementation depends heavily on community acceptance, which is shaped by multiple social factors. This study presents a multi-criteria decision framework to evaluate and prioritize the key social factors influencing AAM adoption. A literature review identified six primary social factors: safety, noise, privacy and cybersecurity, automation, environmental impact, and price and economics. The Analytical Hierarchy Process (AHP) was used …

Versatile Exoskeleton Control Paradigms For Agile Human Locomotion: Task-Agnostic And Stability-Augmented Assistance, Miao Yu

All Dissertations

Lower-limb exoskeletons have shown great potential for assisting human locomotion, but designing controllers that provide assistance across diverse locomotor tasks and under external perturbations remains a major challenge. Many existing controllers for steady-state walking rely on pre-defined reference trajectories, which constrain voluntary human motion and limit adaptability across tasks. Moreover, they usually assume stable walking, while their performance under unstable conditions remains largely unexplored. In addition, existing gait stability augmentation controllers are often reactive rather than proactive to unstable conditions. In this dissertation, we propose control frameworks that preserve voluntary human motion while addressing two major challenges: providing task-agnostic assistance …

Effectiveness Of Quiz-Based Interventions In Virtual Reality Lectures On Learning, Mason T. Prather

Master's Theses

This thesis examined whether quiz-based interventions affect learning during an immersive virtual reality (VR) lecture and whether quiz timing strategy matters when prompts are delivered on a fixed timer or through gaze/Region of Interest (ROI)-based attention timing. The study used an eye-tracking virtual reality headset and a game engine-based classroom application. The final completed cohort included 29 participants assigned to three between-subjects conditions: No Intervention (n = 10), Timer-Based Intervention (n = 9), and Attention-Based Intervention (n = 10). All participants viewed the same virtual reality lecture and completed the same 15-item post-lecture assessment. Mean learning scores were 44.00% for …

Hardware Integration Of Preamble Based 802.11a Wi-Fi Frame Location For Usrp Radios, Nicholas P. Margavio

Honors Theses

Internet of Things (IoT) refers to a network of devices that can exchange information over the internet, and its deployments are projected to reach 30.9 billion by 2025, with most lacking encryption. One solution for these unencrypted devices is to use Specific Emitter Identification (SEI). SEI exploits distinct, native, and unintentional features of a radio’s signal to identify it and enhance wireless network security uniquely. For example, IEEE 802.11a Wireless-Fidelity (Wi-Fi) radio waveforms have a fixed structure that occupies the first 16 microseconds, from which SEI features can be extracted and used to identify the originating radio. By removing the …

Design, Simulation, And Experimentation Of A Box Barge Model Under Asymmetrical Conditions, Kylie Sink

Senior Honors Theses

This study investigates the ability of numerical simulations to predict vessel motion responses under asymmetrical loading conditions. A raked barge model was designed, constructed, and tested in a towing tank to evaluate the response amplitude operators (RAOs) for heave, roll, and pitch under various wave conditions. The model included six internal compartments that allowed different flooding scenarios to be simulated in order to create asymmetric loading conditions. Experimental testing was conducted under head seas (0 degrees) and beam seas (90 degrees) with multiple wave periods.

A numerical model of the vessel was developed using GHS to generate predicted RAOs for …

Design And Evaluation Of A Single-Gate Multi-Threshold Null Convention Logic Architecture For Area Efficiency, John Edward Swaim

Graduate Theses and Dissertations

Asynchronous circuit design paradigms, such as NULL convention logic (NCL) and Multi-Threshold NCL (MTNCL), offer increased energy efficiency over synchronous equivalents and robust pipelines with minimal timing analysis. However, their dependency on dual-rail signal encoding causes significant overhead compared to single-rail equivalents. Previous single-gate and single-rail NCL paradigms have sought to reduce circuit area, but most compromise their quasi-delay-insensitivity and correct-by-construction nature with logic gate and system-level design choices. This thesis presents Single-Gate MTNCL (SG-MTNCL), a register controlled, single-gate, and dual-rail asynchronous architecture to improve the area efficiency of MTNCL without compromising the reliability of previous paradigms. The benefits of …

Aircraft Fault Detection Via Weight And Bias Analysis Of A Custom First Neural Network Layer, George Harrison Chen

Theses and Dissertations

Fault detection in aircraft is traditionally handled through redundant hardware and comparison algorithms to detect failures. Alternatives like model-based residual generation and data-driven approaches such as supervised fault classification and unsupervised anomaly detection have been explored, but they suffer from practical limitations; model-based methods require accurate system models, and data-driven methods have large constraints on the data limiting scalability and adaptability. This work presents a purely data-driven neural network architecture featuring a custom first layer designed for real-time fault detection where the weights and biases of this layer are used to detect faults. The network requires zero supervision and complements …

Moon Adaptive Technology For Extraterrestrial Architectural Robotics (Matear), Candela Noemi Solis Zampini

Theses and Dissertations

The Moon Adaptive Technology for Extraterrestrial Architectural Robotics (MATEAR) focuses on the development of an autonomous robotic system capable of providing structural building blocks directly from lunar regolith. As a sustained human presence on the Moon becomes a necessity, the costly and limited payload capacity associated with transporting construction goods from Earth creates a critical challenge. MATEAR addresses this problem through in-situ resource utilization (ISRU), integrating a regolith processing system onto a remote operated vehicle. The proposed system is designed to collect lunar dust, mechanically compact the material, and apply thermal treatment to enhance cohesion through sintering. These regolith-made bricks …

Exploring The Role Of Video Games In Civil Engineering Education And K-12 Stem Engagement, Jillian S. Codron

Architectural Engineering

Civil engineering education has traditionally emphasized a linear progression from theory to application, with foundational concepts introduced in lecture before being reinforced through laboratory or design experiences. While effective for advanced learners, this approach can limit early engagement for K–12 students who may struggle to connect abstract principles to realworld engineering practice. This project examines the use of video games as interactive, feedback-driven environments for introducing civil engineering concepts and practices to younger learners in more exploratory and accessible ways.

The study pursues four primary objectives: evaluating the educational affordances of selected video games; examining how gaming experiences have influenced …

Stretch Web Teleoperation Keyboard Final Report, Aaron Chou, Francisco Irazaba

Computer Engineering

This project added keyboard controls to the Hello Robot Stretch Web Teleop interface. The goal was to make the robot easier to control from a web browser without needing a gamepad or separate terminal-based keyboard program. The new interface allows users to control different parts of the robot with customizable key bindings.

Computational Fluid Dynamics Modeling Of Counter-Current Flow In Channels Separated By A Membrane, Akram Mashhour Riziq Abdullah

Graduate Theses and Dissertations

Counter current flow in channels separated by membrane were studied in several published studies. The present study aims to numerically and analytically simulate and physically describe the distribution of pressure, volume flow rate and velocity in counter current flow module. Numerical simulation Computational fluid dynamics (CFD) was performed by solving Navier-Stokes (N–S) equations in the channels and membrane pores (vertical channels) to determine pressure and velocity fields. An analytical solution one-dimensional (1-D) model was developed to simulate the flow in the channels and membrane pores by solving the continuity and Darcy’s Law to obtain pressure and volume flow rate. Accordingly, …

Parallelism In Java, Matt Vierow

Departmental Honors & Graduate Capstone Projects

Parallelism and multithreading have become an important facet of programming in recent years. Much work has been done in programming languages such as C and C++ with libraries such as OpenMP. However, less effort has been made to create parallelism tools in higher level languages such as Java. This is important because most programmers learn the basics in languages such as Python and Java that lack parallel tools like OpenMP. This means they must directly manage threads which requires knowledge of object-oriented programming and design.

This project sought to incorporate some elements of OpenMP into Java to allow newer programmers …

Investigating Calcium Oxychloride Deterioration In Concrete: Analyzing Variation In Laboratory Testing Procedures, Standardized Testing Protocols, And Industry Implementation., Joey Roy Parker

Graduate Theses and Dissertations

Abstract Access to sustainable infrastructure is critical for society. In the U.S., over $350 billion is spent annually to maintain roadways providing access to education, medical care, and citizen consumer needs. Maintaining service of these systems during severe winter weather events is a significant challenge for maintenance personnel across the country. The use of deicing/anti-icing materials to lower the freezing temperature is a popular mitigation technique used to provide reasonable driving conditions during these times. The combination of these materials, freeze/thaw cycles, and precipitation produce perpetual deterioration and corrosion within reinforced concrete pavements and bridges. In the U.S., over 60% …