Engineering Commons^™

Energy-Absorbing Helmet For Safer Football, Aidan Laudeman

Honors Theses

Football-related injuries are a common occurrence and are often detrimental to the player’s health. Force impacts frequently occur at the front, back, and sides of a player’s helmet, resulting in head injuries like concussions. The goal of this project is to reduce recurrent head injuries by designing a solution involving the use of energy-absorbing metallic materials that are inserted into a football helmet. These energy-absorbing materials are configured in target zones inside the helmet to reduce the acceleration of the head based on impact locations. The chosen materials are nitinol and spring steel, which display energy-absorbing properties. Various energy-absorbing material …

Electric Ducted Fan Lander, Maggie Waechter

Honors Theses

This report, and corresponding project, addresses the fact that there are not many student experiments with controlling real spacecrafts due to the scarceness of the craft, cost, risk, and finite fuel supply. This project demonstrates the possibility of a classroom substitute for students to understand how landers would operate on planetary bodies. In order to achieve flight from the drone, there were two separate designs produced, the electrical and structural system, that were integrated together to form a full prototype. The performance of the electric ducted fans (EDFs) as well as the batteries were tested to ensure that the components …

Hydrogen Fuel Cell Catalyst Test Stand For Single Cell Evaluation, Tyler Johnson

Honors Theses

The main objective of this project was to develop at test stand and relevant testing procedures to aid in ongoing research being conducted by Dr. Ghantasala’s team on platinum-alternative catalyst materials used in proton exchange membrane fuel cells (PEMFCs). To do this, various software (Microsoft Excel, Python, and Simscape) were used to create fuel cell simulations of increasing complexity. These simulations served as baselines for PEMFC evaluation in experimental testing, and they were used to create polarization curves, a standard method for evaluating steady state fuel cell performance. A test stand was also created in order to effectively and efficiently …

Development Of Deep Neural Architecture For Continuous Sign Language Video Generation, Natarajan B

Theses and Dissertations

This dissertation presents a deep neural network based sign language video generation framework for translating the multilingual sentences into sign videos. This thesis addresses the challenges persist with the sign language video generation such as (i) Handling longer sequences of input sentences and new words (ii) Pose estimation with higher accuracy (iii) High quality photo realistic sign gesture video generation (iv) Improving realism in sign video generation. Hence, the thesis focuses four contributions to address the above issues.

The first contribution of this thesis automates the translation of multilingual sentences into sign glosses without manual intervention by incorporating Hybrid Neural …

Techno-Economic Analysis Of Solar Pv Systems Under Various Environmental Conditions, Ramkiran B

Theses and Dissertations

World Energy Council has predicted that the global electricity demand will peak in 2030. The need for renewable energy has grown rapidly due to the rising energy demand in this ever-growing population. Green house gas emissions are predominantly due to the energy generation and consumption of fossil fuels. On the other hand, fossil fuels supply nearly 74% of India's energy demand, making India one of the world's largest coal consumers.

According to World Resource Institute, India ranks fourth in the world in terms of carbon emissions. Investments in renewable energy sources and energy-saving technologies should be part of a solution …

Tunable Dual-Phase Dual-Drug Delivery System Using A Plga Microparticle/Pva Hydrogel Composite, Timothy John Eck

Theses and Dissertations

Current drug-eluting coatings have demonstrated controlled long-term, sustained release but have only tried to mitigate short-term burst release as a negative side effect. For applications like wound healing, there is a need for a drug-eluting coating which is adjustable in both short- and long-term release, independent of each other. We present a tunable dual-phase dual-drug delivery coating composed of drug-loaded polymer microparticles and drug-loaded hydrogel which can control short term and long term release individually in this study. This coating was created using lidocaine and dexamethasone encapsulated in poly(D,L-lactide-co-glycolide) particles combined with lidocaine- and dexamethasone-loaded poly(vinyl alcohol) hydrogel. Hydrogel drug …

1st Person Ev With Electronic Differential, Tessa Biondo

Honors Theses

The First Person EV with Electronic Differential for Vehicle Dynamics Analysis project makes a significant leap forward in the exploration of electric vehicle (EV) stability and performance enhancement. Lead by a team of skilled electrical engineering students under the guidance of WMU’s associate Professor Dr. Sandun Kuruppu, this project aims to improve EV stability by optimizing power and torque distribution between wheels using an electronic differential system. The project encompasses the design and assembly of a 1/7^th scale custom electric vehicle, capable of remote control via a first-person view (FPV) camera and modified USB wheel and pedal assembly. The …

Design Of Telemetry And Remote-Control System For Electric Propulsion Testing, Logan Alvesteffer

Honors Theses

Ground testing of electric propulsion (EP) devices occurs inside vacuum chambers and is monitored using high-frequency and low-frequency telemetry systems. These systems provide critical operational information about the device’s performance by monitoring values such as voltage, current, gas flow rates, and chamber pressures. Ground facility telemetry systems can operate as integrated control and safety architecture while testing EP devices. EP testing at Western Michigan University (WMU) is located within the Aerospace Laboratory for Plasma Experiments (ALPE). The Cold plasma Experimental Research Station (CEReS) is outfitted with CTI-250F and CTI-10 cryogenic pumps for a combined pumping capacity of 5,200L/s-air. CEReS facilitates …

Production Of Mrna Vaccine For Influenza, Christina Miller

Honors Theses

The objective of this project is to design a process to produce an mRNA influenza vaccine that serves as an alternative to conventional influenza vaccines, replacing current options with innovative mRNA technologies. Given that older populations are most likely to follow up on immunizations consistently, and the increasing average age worldwide, the market for this project appears to be expanding in the next 80 years. Additionally, experts predict more frequent mutations and outbreaks of viral disease from a variety of factors including globalization and global temperature trends. Rapid response to these viral outbreaks will continue to be as, or even …

Systems, Models, And Simulation For Novel Microfabrication Of Silicon Carbide And Metal Mesh Filters, Hunter R. J. Stevenson

Theses and Dissertations

As the boundaries of Moore's Law rapidly approach, research is increasingly turning to exotic materials and metamaterials to advance the capabilities of electronic and micromechanical systems. This thesis presents systems, models, and simulation techniques for novel microfabrication in the realms of silicon carbide (SiC) and metal mesh filters. Through the unification of femtosecond laser pulses, high numerical aperture (NA) objective lenses, and system power and motion control, a system capable of achieving arbitrary 3D features without line-of-sight with aspect ratios up to 109:1 in SiC is developed. Additionally, a model of a direct-write femtosecond-laser-ablation fabricated metal mesh filter (MMF) is …

Modified Coulomb Approach For Squat Silos, Mitchell Cade South

Theses and Dissertations

Traditional methods for calculating lateral pressures in silos, such as Janssen's Method and Coulomb's Method, have limitations due to the underlying assumptions of each methodology. This research investigates an approach which adapts Coulomb's Method to account for the cylindrical geometry of silos. The Silo Wedge Method (SWM) distinguishes between two cases based on the aspect ratio (height/diameter) of the silo. Comparative analysis reveals that the SWM accurately matches Coulomb's Method for linear retaining walls when the silo aspect ratio approaches zero. As the aspect ratio increases above 0.25, the SWM exhibits behavior similar to Janssen's Method. This suggests a potential …

Chatting With Online Agent, Guoxi Robert Zhang

Honors Theses

This study investigates trust in AI-generated language fluency. Participants engaged with both human and AI-generated content, varying in fluency. Findings were to favor trust in fluent human and AI interactions over disfluent ones. Understanding fluency's impact can inform AI design and encourage critical thinking when dealing with AI-generated content. By using qualitative analysis of think-aloud reports, we examined strategies that people use to assess texts labeled as human-generated and AI-generated content.

Development Of Novel Analytical Methods For The Investigation Of Mammalian Tissues And Cells, Grace A. Binder

USF Tampa Graduate Theses and Dissertations

This dissertation endeavors to advance the frontiers of analytical chemistry by addressing critical challenges across three distinct chapters. In the first chapter, the focus is on the evaluation of digestion methods for the analysis of trace metals in mammalian tissues and the Standard Reference Material NIST 1577c. The primary goal is to optimize methodologies, laying the groundwork for reliable trace metal analysis and furthering our understanding of their roles in biological systems.

Transitioning into the realm of immunomodulation, the second chapter elucidates immune response, disease and treatment through the optimization and discovery of STING modulators, utilizing the luciferase assay for …

Sustainability In Civil And Construction Engineering, Connotations, Paradigms, And Perceptions, Xiaomei Wang

Theses and Dissertations

Over the last four decades, the concept of sustainability has evolved significantly, gaining prominence since the Brundtland report in 1987. Operating at the intersection of built and natural environments, Civil and Construction Engineering (CCE) projects and designs inherently impact the natural surroundings. In this context, the concept of sustainability serves not only as a guiding principle to mitigate depletion but also as a pathway to achieving balance among diverse societal needs so every creature can survive and thrive. Despite considerable efforts in this domain, the definition of sustainability within the CCE discipline remains elusive. Paradoxically, the popularity and vagueness of …

Development Of Zr(Iv) Mof-Enabled Nerve Agent Electrochemical Hydrolysis Sensors, Tyler James Marlar

Theses and Dissertations

Nerve agents are acetylcholinesterase inhibitors and among the most toxic chemical warfare agents ever synthesized. Detection of these chemicals is critical for the protection of populations and strategic resources. G-series nerve agents are volatile compounds. V-series nerve agents are persistent phosphonothioate compounds. Persistent nerve agents do not readily volatilize and can contaminate environmental resources for extended periods. While nerve agents are inherently non-electroactive, they can be hydrolyzed to electroactive products compatible with electrochemical sensing. Zr(IV) MOFs are next-generation nanoporous materials, which have been shown to rapidly catalyze nerve agent hydrolysis. In this work, the catalytic processes of MOF-808, a specific …

Detection Of Endocrine-Disrupting Chemicals In Personal Care Products Using A Polyhedral Oligomeric Silsesquioxane-Based Hybrid Material, Aarthi K

Theses and Dissertations

Personal care products (cosmetics) are a diverse group of goods, that includes all the essential routines including the personal hygiene products used in our day-to-day life. It contains a variety of ingredients in its formulation, including preservatives, flavor, UV filters, and other additives. Few of the chemicals utilized are found to impair human health and have serious environmental impacts. The major chemicals include parabens, triclosan, oxybenzone, phthalates, heavy metals, fragrances, etc, Though the Scientific Committee on Consumer Safety (SCCS) has set the usage limits for the chemicals used, exposure to these chemicals from multiple products may exceed the exposure limit. …

Development Of A Discrete Element Model For Artificial Turf, Justin Rittenhouse

Dissertations

NFL data exhibits a distinct correlation between an elevated lower extremity injury rate and synthetic surfaces. These ubiquitous injuries frequently relate to excessive foot traction (i.e., failure to release causing fracture or soft tissue damage). Consequently, a discrete element model was developed using open-source software to analyze stud traction. First, laboratory data was collected via bench level experiments covering seventeen different testing scenarios. A minimum of twenty-five samples were collected per scenario. Total work, average torque, and maximum torque were used as indicators of stud grip. And the latter two were statistically analyzed for outliers and significant differences. Next, an …

General Non-Destructive Evaluation For Friction Stir Welding, Johnathon Bryce Hunt

Theses and Dissertations

Friction stir welding (FSW) is an advantageous solid state joining method for many different engineering designs. It was invented in 1991 by TWI and since that time a tremendous amount of research has been executed to understand and implement FSW in a myriad of materials in numerous industries such as aerospace, ship building, train, automotive, energy, agriculture and others. Most industries have strict weld inspection processes to validate a weld before it is put into service. One of the main weld characteristics that is measured is the size of any subsurface volumetric voids. The current standard to test friction stir …

Time-Scale Of Groundwater Recharge In Coastal Plain Soils, Qing Du

USF Tampa Graduate Theses and Dissertations

Understanding and modeling the timing and magnitude of groundwater recharge fromrainfall infiltration through vadose zone percolation is important for many reasons but especially because the flux is being acted on by root zone evapotranspiration (ET) and very little of rainfall infiltration ever becomes water table recharge. This study elaborates on the considerable time of the wetting front arrival and ultimate bulk recharge of rainfall infiltration in shallow water table fine-sandy soils typical of coastal plain environments such as Florida. Calibrated Hydrus-1D modeling of Florida (Myakka) soil was evaluated at varying depths of water table and hydraulic conductivities to bracket the …

Microcapsule Transport And Blockage In Rough-Walled Fractures, Brittney Diana Seaburn

Civil Engineering ETDs

Thermal short-circuiting is a potential problem for Enhanced Geothermal Systems (EGS). One solution to this problem is to reduce the permeability of very conductive fractures with thermally degradable microcapsules carrying porous polymers that bond to rock, reducing fluid flow without completely sealing the fracture. This concept requires microcapsules to principally travel in the larger, problematic fractures, minimizing entry into smaller fractures; consequently, understanding the transport and blockage of microcapsules is critical. Using a flow visualization configuration, this study involved quantifying the transport and blockage of microcapsules in transparent fracture replicas. Analyses determined most blockage occurred in regions with local apertures …

Development Of Novel Radiotherapy Treatment Monitoring And Quantitative Cherenkov Surface Dosimetry For Diverse Populations, Savannah M. Decker

Dartmouth College Ph.D Dissertations

In the U.S. alone, nearly 2 million people will be diagnosed with cancer annually, and over half of them will receive radiation therapy throughout the course of their care. While widely regarded as safe, radiation therapy presents unique challenges that other procedures, such as surgery, lack. Namely, the invisible nature of the radiation itself makes it impossible to directly visualize treatment. Many immobilization and localization techniques exist to minimize the chance of incorrect radiation dose delivery, yet incidents still occur. Within the last decade, Cherenkov imaging has emerged as a new radiation therapy delivery verification technique. Cherenkov imaging is unique …

W/V-Band Propagation Modeling, Nolan Rebernick

Electrical and Computer Engineering ETDs

Enhancing the accuracy of atmospheric loss modeling holds the potential to significantly refine estimations of received power, thereby enhancing the overall quality of satellite communication links. This study aims to pioneer and validate an innovative modeling framework to reliably predict atmospheric attenuation along satellite-to-ground propagation paths, particularly focusing on portions of the W-band (81-86 GHz) and V-band (71-76 GHz). By leveraging meteorological data, this approach will encompass various weather scenarios, including clear skies, cloud cover, and diverse forms of precipitation. Utilizing the generated time domain data, the research aims to construct complementary cumulative distribution functions, enabling the analysis of satellite …

Electrodeposition Of Gadolinium Metal Thin Films For Neutron Phase Contrast Imaging, Mary Louise Gucik

Chemical and Biological Engineering ETDs

A rare earth metal, gadolinium has unique magnetic properties and the largest neutron absorption cross section making it highly sought after in emerging technology. However, unlike most metals, it is difficult to work with and lacks a damascene process. When incorporated into alloys, gadolinium’s properties are muted and the film thickness must increase to account for the low concentration. Gadolinium metal films have been deposited successfully through sputter coating, but these films have density deficiencies and are limited to line-of-sight substrates. In this work, the deposition of gadolinium metal thin films was investigated for use on complex geometries via electrophoretic …

Quantum Search Algorithms For Constraint Satisfaction And Optimization Problems Using Grover's Search And Quantum Walk Algorithms With Advanced Oracle Design, Abdirahman Sheikh Hassan Alasow

Dissertations and Theses

The field of quantum computing has emerged as a powerful tool for solving and optimizing combinatorial optimization problems. To solve many real-world problems with many variables and possible solutions for constraint satisfaction and optimization problems, the required number of qubits of scalable hardware for quantum computing is the bottleneck in the current generation of quantum computers. In this dissertation, we will demonstrate advanced, scalable building blocks for the quantum search algorithms that have been implemented in Grover's search algorithm and the quantum walk algorithm. The scalable building blocks are used to reduce the required number of qubits in the design. …

Adaptive Sampling For Seabed Identification From Ambient Acoustic Noise, Matthew Sullivan

Dissertations and Theses

This thesis discusses distinguishing geoacoustic properties of seabeds by adaptively sampling ambient acoustic measurements using an autonomous underwater vehicle. Modern advancements in seabed characterization motivate an online method for distinguishing between two seabed types using Fourier transformed ambient acoustic noise snapshots. These snapshots are assumed to be associated with their spatial location and seabed, making the goal to organize unlabeled seabed locations. The snapshots are transformed to obtain pairwise similarities between locations. Locations with similarities exceeding a threshold are classified together with the goal of identifying all locations with similarities below this threshold using a process known as level set …

Ml/Ai Enabled Intelligent Next Generation Autonomous Network System: Performance Enhancement And Management, Harsh Kumar

Electrical and Computer Engineering ETDs

The smart next generation autonomous system for network performance enhancement and management, specifically suitable for networks like 5G, B5G, 6G, and SDN, is presented in this PhD dissertation powered by ML/AI. The dissertation has been divided into six critical parts. First, it focuses on QoS monitoring and provisioning using intelligent QoS agent design in 6G network. Second, it elaborates on LSTM and SP-LSTM comparative analysis towards network traffic prediction in 6G networks. Third, digging into 6G frontier navigation using SE-DO for intelligent Agent Optimization. Fourth, the dissertation delves into role delegation function as a service to improve reliability and latency …

A Feasibility Study Of Drilling Fluid Slippage For Wellbore Displacement, John Johnson

LSU Master's Theses

In the ideal plug-flow mode viscoplastic drilling fluids display uniform frontal velocity due to wall slippage (at very low flowrate limited by the fluid’s yield strength). The flow rate could be increased by raising the yield strength that would make the fluid best candidate for frontal displacement. Based on this concept the study qualifies wall slippage effect for wellbore displacement. Using a conceptual model of fluid motion between two parallel plates defines maximum velocity as a function of shearing rate and yield stress. Conversion to coaxial geometry gives practical formulas for fluid testing with rotational viscometer. A new analysis of …

Enhancing Cyber Resilience: Development, Challenges, And Strategic Insights In Cyber Security Report Websites Using Artificial Inteligence, Pooja Sharma

Harrisburg University Dissertations and Theses

In an era marked by relentless cyber threats, the imperative of robust cyber security measures cannot be overstated. This thesis embarks on an in-depth exploration of the historical trajectory and contemporary relevance of penetration testing methodologies, elucidating their evolution from nascent origins to indispensable tools in the cyber security arsenal. Moreover, it undertakes the ambitious task of conceptualizing and implementing a cyber security report website, meticulously designed to fortify cyber resilience in the face of ever-evolving threats in the digital realm.

The research journey commences with an insightful examination of the historical antecedents of penetration testing, tracing its genesis in …

The Role Of Attention Mechanisms In Enhancing Transparency And Interpretability Of Neural Network Models In Explainable Ai, Bhargav Kotipalli

Harrisburg University Dissertations and Theses

In the rapidly evolving field of artificial intelligence (AI), deep learning models' interpretability

and reliability are severely hindered by their complexity and opacity. Enhancing the

transparency and interpretability of AI systems for humans is the primary objective of the

emerging field of explainable AI (XAI). The attention mechanisms at the heart of XAI's work

are based on human cognitive processes. Neural networks can now dynamically focus on

relevant parts of the input data thanks to these mechanisms, which enhances interpretability

and performance. This report covers in-depth talks of attention mechanisms in neural networks

within XAI, as well as an analysis …

Enhancing Mobile App User Experience: A Deep Learning Approach For System Design And Optimization, Deepesh Haryani

Harrisburg University Dissertations and Theses

This paper presents a comprehensive framework for enhancing user experience in mobile applications through the integration of deep learning systems. The proposed system design encompasses various components, including data collection and preprocessing, model development and training, integration with mobile applications, dataset management service, model training service, model serving, hyperparameter optimization, metadata and artifact store, and workflow orchestration. Each component is meticulously designed with a focus on scalability, efficiency, isolation, and critical analysis. Innovative design principles are employed to ensure seamless integration, usability, and automation. Additionally, the paper discusses distributed training service design, advanced optimization techniques, and decision criteria for hyperparameter …