Engineering Commons^™

Development Of Satellite-Assisted Forecasting System For Vibrio Vulnificus Prevalence In Coastal Waters, Saber Aradpour

LSU Doctoral Dissertations

Vibrio vulnificus is a halophilic gamma proteobacterium that is autochthonous to coastal waters and is responsible for 50% of seafood-related deaths in the United States. This study presents a series of nowcasting and forecasting models for predicting vibrio vulnificus abundance in oysters by identifying the long-range dependence of vibrio vulnificus abundance on antecedent environmental conditions and detecting the environmental conditions using satellite remote sensing technology. It was discovered that vibrio vulnificus abundance exhibits a long-range dependence on antecedent environmental conditions which can be characterized by seven independent environmental predictors (stressors) including sea surface temperature (SST), water level (WL), sea surface …

Distributed Energy Trading Models Utilizing Reinforcement Learning And Game-Theoretic Based Approaches In Smart Grids, Nicholas Kemp

Electrical and Computer Engineering ETDs

Community-driven energy initiatives have become crucial for effective energy management, particularly in trading and management. The rise of Distributed Energy Resources in smart grids demands a redesign of traditional Demand Response Management (DRM) models to account for prosumers' dynamic behavior in energy markets. Decentralization, including peer-to-peer (P2P) energy trading, is vital for resilience and sustainability. This thesis introduces two coalitional DRM models: one based on hedonic community formation games, and the other combining matching theory with coalition games. These models empower prosumers to autonomously select energy trading communities using partially available data. To optimize energy consumption, two additional models are …

Sofast Cad Layout Tool, Felicia Brimigion

Mechanical Engineering ETDs

Concentrating solar mirrors need to have correct geometry to accurately focus sunlight onto a receiver. SOFAST is a tool created at Sandia National Laboratories which measures a mirror’s surface normal at a dense sampling of points, enabling evaluation of a given mirror’s expected performance. SOFAST supports general mirrors, including concentrating solar heliostats, troughs, and dishes. The examples presented in this report predominantly focus on heliostats.

There are generally four major components of a SOFAST system – the mirror, camera, projector, and screen. For SOFAST to properly measure a mirror, the following geometric constraints must be satisfied:

1. The reflection of …

Soft Electronics And Systems For Display And Healthcare Applications, Junyi Zhao

McKelvey School of Engineering Graduate Student Theses & Dissertations

Soft electronics are emerging as a revolutionary platform, signifying a pivotal shift from performance-centric priorities to human-centered principles that emphasize accessibility, sustainability, and user experience. As conventional electronics technology approaches its performance ceiling, further improvements in performance metrics have slowed, prompting consumers to place greater importance on user experience and eco-friendliness. Compared to traditional rigid electronics, soft electronics offer the potential to seamlessly integrate biological systems with soft electronic frameworks. Motivated by these demands, this dissertation has been dedicated to bridging fundamental material studies, advanced manufacturing, novel electronic devices, system-level integrations, and practical applications. This interdisciplinary endeavor aims to establish …

Reality Capture Technologies For Continuous Inline Quality Monitoring In Construction 3d Printing, Michael J. Martin Ii

LSU Master's Theses

Extrusion-based construction 3D printing (C3DP) is an innovative and emerging technology aiming at the modernization of the construction industry. It uses robots and computer control to reduce the need for human labor and to decrease construction time and cost. C3DP creates elements layer by layer without using formworks, and it is critical to detect layer defects and deformations to ensure that each layer is printed with the desired dimensions. These defects can lead to a variety of issues during or after the construction process, including the collapse of freshly printed elements. In order to detect such deformations and to enable …

The Role Of Furan Moieties On The Thermal Decomposition And Char Formation Of Intrinsically Fire-Resistant Epoxy Thermosets For Composites, Amy E. Honnig Bassett

Theses and Dissertations

Fire-retardant chemicals added to epoxy thermosets used as coatings, adhesives, and fiber-reinforced polymer composites (FRPCs) negatively impact performance and the environment. This dissertation takes a novel approach to mitigate the flammability of these systems by designing intrinsically fire-resistant epoxies via the incorporation of furan moieties. Glycidyl amines based on furfuryl amine and judiciously selected derivatives of furfuryl amine were synthesized to produce furan-based di-epoxies (FDEs) that were cured by anionic polymerization and with amine curing agents. The furan ring was found to impart additional reactivity for cross-linking and to induce char-forming reactions at higher temperatures. More importantly, the placement of …

Coupled Monte Carlo And Adjoint Depletion Sensitivity Coefficient Methods, Benjamin R. Murphy

Nuclear Engineering ETDs

Recent advances in adjoint-based, continuous-energy Monte Carlo generalized perturbation theory (GPT) sensitivity coefficients are combined with adjoint-based depletion perturbation theory (DPT) sensitivities to obtain fully coupled depletion sensitivity coefficients in OpenMC. These depletion sensitivity coefficients are compared with direct perturbation results and found to have generally good agreement, though discrepancies exist. Some shortfalls of the DPT method include the inefficient initial numeric integration scheme for calculating the DPT sensitivities and the lack of stochastic uncertainty estimates for the DPT sensitivities. However, despite these shortcomings, the methodology provides the means to obtain high fidelity depletion sensitivity coefficients. With refinements to the …

Exploration Of Semiconductor Gain Medium, Resonator, Pump, And Frequency Stabilization For Laser Guide Star Applications, Mingyang Zhang

Optical Science and Engineering ETDs

Laser Guide Star (LGS) systems are essential for adaptive optics in ground-based astronomical observation. This dissertation demonstrates the feasibility of semiconductor-based LGS systems using the membrane external-cavity surface-emitting laser (MECSEL) platform, employing multiple quantum wells. Various laser cavity configurations were analyzed through simulations and experiments. The in-well pumping method was explored to reduce the quantum defect and address thermal limitations. Multi-pass pumping schemes were designed with Zemax modeling and demonstrated experimentally. To simplify multi-pass pumping, the hybrid-MECSEL (H-MECSEL) design was introduced. COMSOL modeling studied thermal management and thermal lensing effect.

The H-MECSEL achieved approximately 30 W of output power at …

Insight Into Complexity: Novel Information Theoretic Analysis Of Spatiotemporal Interactions, Humayra Tasnim

Computer Science ETDs

Complex systems are comprised of different components. Interactions and associations among these components define the functionality of the system. For example, T cells must directly interact with virally infected cells to kill them. This research characterizes the most relevant components of complex systems by analyzing interacting relationships using information theoretic measures. It emphasizes the importance of spatial and temporal dynamics, which occur when components share spatial proximities or temporal sequences. Novel information theoretic analyses are proposed for quantifying the degree of association among system components, which is key to defining the spatiotemporal dynamics. One focus of this work is the …

Evaluation Of Dotd’S Aggregate Sources Friction Using Laboratory And Accelerated Testing, Sudhir Bharati

LSU Master's Theses

Roadway safety is of utmost importance to the state transportation agencies. One of the major factors of roadway safety that agencies have control over is pavement friction which is affected by aggregate and mixture type. The Louisiana Department of Transportation and Development (DOTD) currently uses Polished Stone Values (PSV) obtained from the British Pendulum Device to rate its aggregates. These ratings determine the applicability of aggregates for various projects. However, the ratings are inconsistent, posing significant safety and financial risks. The first part of the thesis compares the currently adopted British Wheel Polisher-based Standard Practice for the Accelerated Polishing of …

3d Printing Of Local New Mexican Soil Material: Improving Durability Properties By Assessing Traditional Methods Towards Alternative Sustainable Construction, Daiquiri Devon Zozaya

Civil Engineering ETDs

3D printing (3DP), or additive manufacturing, represents a dynamic and swiftly advancing manufacturing method in which diverse materials are deposited layer by layer through computer-controlled processes, creating intricate geometries. This technology has demonstrated success in various construction applications, including the construction of bridges, bus stop stations, and even residential homes. Nonetheless, the predominant application of 3DP in construction relies heavily on cement due to its robustness, convenience, and ease of use. Regrettably, the cement sector is a substantial source of greenhouse gas emissions, responsible for approximately 8% of worldwide CO₂ emissions. Investigating all facets of carbon emissions reduction is …

Building A Trusted Relationship Among Project Participants In Construction Projects On Tribal Land, Dominica J. Bennett

Civil Engineering ETDs

There are 574 federally recognized tribes in the United States, and these tribal communities differ by culture, language, history, and self-governance. Performing a tribal construction project is different than a non-tribal project due to tribal sovereignty, tribes are both legally and regulatory independent. The United States has recognized its trust with Indigenous tribes through treaties, statutes, and historical relations, however treaties and statutes have been broken over time. This paper aims to qualitatively and quantitatively identify relationships and trust built between contractors, designers, and owners on construction projects while identifying challenges. The methodology involves survey distribution to rank the level …

Effect Of Air Filtration On Water Quality During Atmospheric Water Harvest In The Southwest United States, A.J. Barney

Civil Engineering ETDs

Access to sustainable drinking water is a concern across the globe. Atmospheric water harvest (AWH) offers a potential supplemental drinking water source. However, the sources and processes affecting AWH water quality are not well understood and must be thoroughly studied to consistently utilize AWH for drinking water. The objective of this research is to assess how removing particulate matter (PM) 2.5 and PM10 in the air used to produce AWH with air-filters affects the water quality of AWH. AWH samples were collected simultaneously with three identical dehumidifiers, utilizing three different air-filter configurations (no-filter, MERV8, and MERV12) in Albuquerque, NM from …

A Stable Isotope Study To Investigate Water Movement In The Los Lagos Region Of Southern Chile, Kritan Subedi

Civil Engineering ETDs

The Los Lagos region in southern Chile, located in northwest Patagonia, features rain-fed agricultural lands, glacial lakes, forests, farmlands, and volcanic soils. This study investigates water movement within a micro-basin using stable isotope analysis and hydrological modeling over eight weeks. It aims to develop a conceptual model of water movement by elucidating interactions between precipitation, soil water, and streamflow. Findings highlight the critical role of deeper soil layers in sustaining streamflow during dry spells and indicate that soil acts as a buffer, maintaining hydrological continuity despite variable precipitation. Improved understanding of these dynamics can inform watershed management and water resource …

Engineered Cementitious Composites: The Good, The Bad, And The Possibilities, Michele M. Anderson, Michele M. Anderson

Civil Engineering ETDs

Construction materials require testing in the laboratory and field to be accepted as viable tools. Engineered cementitious composites (ECC) are a new material in the class of ultra-high-performance concrete studied and tested in the lab but not in the field. This research aimed to answer questions about ECC's ability to be a viable and cost-efficient construction material. The cost of ECC continues to be a factor in the acceptance of the material. Cost savings in construction and labor have not been identified until now, and it is good. Field condition testing of ECC in a desert climate known for extreme …

Experimental Investigation On Mechanical Properties Of Pla Reinforced By Bamboo Fiber/Montmorillonite Clay Hybrid Composites And Analysis Of Machining Characteristics, Nirmal Kumar K

Theses and Dissertations

The study presents a comprehensive investigation into the development, characterization, and machining analysis of novel bio-based polymer hybrid composites comprising Polylactic acid (PLA), bamboo powders (BP), and montmorillonite clay particles (MMT). Initially, the hybrid composites were fabricated using a solvent-free stir casting process, optimizing the weight percentages of BP and MMT to enhance mechanical and thermal properties.

Mechanical tests, including tensile, flexural, and impact tests, along with thermal analysis using thermogravimetric analysis and differential scanning calorimetry, were conducted to evaluate the performance of the composites. In the subsequent phases, advanced machining techniques were employed to analyze the machining characteristics of …

Optical Responses Of Hybrid Electromagnetic Nanostructures, Dominic Bosomtwi

Optical Science and Engineering ETDs

Fano resonances result from the interference between a broad background and a narrow state, producing asymmetric scattering profiles. Under specific conditions, destructive interference collapses the Fano resonance width, leading to bound states in the continuum (BICs) that localize light within a nanostructure while maintaining an infinitely high-quality factor (Q-factor).

This dissertation explores the design of nanostructures with multilayer hybrid plasmonic-dielectric metasurfaces using full-wave numerical simulations, facilitating multiple Fano resonances and BICs. By adjusting nanoantenna dimensions, multiple modes are excited at plasmonic-dielectric interfaces, leading to strong interactions and hybridization of energy levels, manifested as Rabi splitting.

These findings enable advancements in …

Membrane Hinges For Deployable Systems, C. Mitchel Skinner

Theses and Dissertations

Origami-inspired and deployable technology has become increasingly common in a variety of applications including satellite and antenna designs for space applications. The drive to utilize ultra-thin materials in the design of these deployable space structures has led to the development of membrane hinges. Membrane hinges show promise as an effective surrogate fold because of their potential advantages including requiring minimal volume and mass, allowing for small bending radii, and functioning without lubricant. Two challenges associated with membrane hinges include reliability after repeated cyclic loading and predictability of a large deployable with radially-unconstrained membrane hinges. The research presented includes the cyclic …

Chemical And Physical Properties Of Fine Fractions From A Village Proximate To A Uranium Mine: Insights About Soil Health, Mary P. Haley

Nanoscience and Microsystems ETDs

Thousands of abandoned uranium mines (AUM) in Native American tribal lands have not been fully remediated, leaving uranium mine wastes exposed and accessible for potential erosion and transport by wind. Analyzing the metal and organic content of the fine-grained fractions in soils could uncover the impact of mine legacy on the soil health in communities that live in proximity to AUM. This study investigates the physical and chemical properties of the fine-grained fraction (μm) of soils to quantify the effect of heavy metal-bearing particulates on the soil health in the village of Paguate and within the Jackpile-Paguate AUM located on …

Gene Expression Analysis Reveals Dysregulation In Traumatic Brain Injury Leading To Tauopathy, Kristina M. Tosi

USF Tampa Graduate Theses and Dissertations

Traumatic Brain Injury (TBI) causes a cascade of detrimental events within neurons, contributing to a host of neurological diseases relating to dementia. In this study we have performed a meta-analysis comparing differentially expressed genes (DEG) in specific cell types such as neurons and microglia revealing inflammation as a common driver of neurological deficiencies post TBI. Inflammation and hypoxia are well characterized features of TBI; however, the molecular mechanisms causing tau hyperphosphorylation by tauopathy associated genes (TAG) post-TBI are currently poorly understood. Furthermore, there are limited in-vitro neuroinflammatory models that mimic primary and secondary TBI. We hypothesize that inducing hypoxia and …

Performance Assessment Of Aboveground Storage Tanks During Flood Events, Md Manik Mia

LSU Doctoral Dissertations

This research addressed the performance of aboveground storage tanks (ASTs) and connected pipelines during floods. ASTs, integral to the oil and gas industry, store hazardous materials like crude oil and chemicals. Positioned near coastal regions, especially the hurricane-prone Gulf Coast, these areas are vulnerable to natural hazards such as floods and hurricanes. This vulnerability can lead to potential environmental and economic disasters, as seen with past hurricanes.
The primary objectives were to investigate AST bottom plate failure mechanisms under flood conditions, assess material failure in tank shells and bottom plates using finite element models, examine the behavior of connected pipelines, …

Embedding Direction Of Arrival And Antenna Beamforming Algorithms On Automated Software Defined Radio Platforms, Adrian J. Lewis

Electrical and Computer Engineering ETDs

Antenna arrays are an essential technology in the modern era in both communications and radar applications. The algorithms used for antenna arrays are beginning to be embedded in smart device applications to enable greater communication abilities. This thesis explores the idea of embedding direction of arrival and beamforming algorithms using a software defined radio platform. Specifically, the Multiple Signal Classification (MuSiC) algorithm and Minimum Variance Distortionless Response (MVDR) algorithm are combined. The combination of similar algorithms has the potential to be used in many internet of things applications to enable more dynamic communication ability.

Hurricane Vulnerability Of Above Ground Storage Tanks, Santosh Ghimire

LSU Master's Theses

The objectives of this research were to: 1) develop an approach to determine the effectiveness of regional storm surge reduction strategies and structural mitigation measures for aboveground storage tanks (ASTs), and 2) study the feasibility of controlled flotation of ASTs during flood and storm surge events. This study provided a comprehensive risk assessment strategy for regional portfolio of tanks, considering all dominant failure modes relevant to future planning initiatives aimed at reducing AST failures. Additionally, this research contributed a new methodology to prevent AST failures during flooding, offering a potential solution to prevent hazardous spills.

Design guidelines such as API …

Development And Characterization Of Automated Screen Mesh-Based Microfluidic Device To Perform Continuous Countercurrent Liquid-Liquid Extraction, Quinn Mcculloch

Nanoscience and Microsystems ETDs

Continuous Countercurrent Microfluidic Liquid-Liquid Extraction (CC-MLLE) shows tremendous potential to generate large numbers of equilibrium stages of separation in a small footprint, with a minimum of pumping, valving, and phase separation steps. However, CC-MLLE rarely appears in literature because it requires a delicate balance between capillary and hydrodynamic forces for deterministic flow.

This dissertation showcases a patented screen mesh-based CC-MLLE invention that performs stable, long-duration (> 36 hr.), countercurrent liquid-liquid extraction and achieves 37 equilibrium stages within a 38.5 μl internal volume. The device is fabricated from chemically resistant polyetheretherketone plastic, using standard machine shop equipment, a plotting cutter, screen …

The Newgeneratortm Decentralized Wastewater Treatment System For Non-Sewered Sanitation: Technology Advancement Through Field Evaluation And Modeling, Hsiang-Yang Shyu

USF Tampa Graduate Theses and Dissertations

Non-sewered sanitation systems (NSSS) offer innovative solutions to sanitation challenges in areas lacking basic facilities, utilizing advanced treatment technologies for on-site water reuse. The NEWgenerator (NG), an advanced NSSS developed at the University of South Florida under the Bill & Melinda Gates Foundation’s Reinventing the Toilet Challenge, integrates an anaerobic membrane bioreactor (AnMBR), an ion exchange-based nutrient capture system (NCS), and an electrochlorinator for final disinfection. This study builds on previous field trials of the NG system, focusing on developing, evaluating, and optimizing its water reuse capabilities through field trials, system dynamics modeling, and advanced monitoring techniques.

In the first …

Adaptive Screen Capture Video Analysis, Ugesh Egala

Electrical and Computer Engineering ETDs

This thesis presents a system for analyzing student activities during class sessions to gain insights into the learning process. A dataset consisting of 14 screen recordings, with 2 videos labeled across two stages, was used for training, validation, and testing. The methodology employs adaptive sampling, initially at 10 frames per minute to identify active regions, followed by detailed analysis at 1 frame per second using OCR to detect typing activities through character changes. The results demonstrate over a 50% reduction in computational load while maintaining high accuracy in detecting student engagement. A total of 26 hours of screen capture videos …

Bio-Inspired Robotic Framework For Spatiotemporal Analyses In Environmental Monitoring Applications, Maliha Kabir

Electrical Engineering Theses

Frequent fluctuations in the environment's temperature and climate significantly impact our crop fields. Floods and droughts occur in different places in different seasons, which is very unusual and affects the crops' health and productivity. During these calamities, they are also not able to monitor their crop fields. However, if it is possible by providing farmers with information about their fields' conditions like temperature, pressure, and soil moisture, we can help them assess environmental conditions for specific areas. This data can also aid farmers in determining the appropriate amounts of fertilizers and pesticides to apply to their crops and which crops …

Development And Operationalizing Of The Learning Experience Design Process To Create Integrated Stem Interventions, Vanessa Begat

LSU Doctoral Dissertations

Globally, the demand for people prepared to enter Science, Technology, Engineering and Math (STEM) careers is increasing. To help fill this demand, many formal and informal STEM educational interventions have been implemented in the K-12 domain. However, due to the lack of a clearly defined framework for documenting the nature and scope of the intervention (National Research Council, 2014), the interventions vary greatly in their success, sustainability, and replicability. This research is grounded in Educational Design Research and uses the principle of Learning Experience Design (LXD) to develop a framework for thoughtfully designing and documenting a STEM intervention. This framework …

On The Surface Topography Of Local Overheating And Plasma Formation Due To Initial Condition Perturbations Sourcing The Electrothermal Instability On High-Current-Density Conductors, Maren Whiting Hatch

Electrical and Computer Engineering ETDs

The electrothermal instability (ETI) is a Joule heating-driven instability that instigates runaway heating on conductors driven to high current density, altering the 3D evolution of the expansion and phase state. Most metals include complex distributions of imperfections (voids, resistive inclusions) which seed ETI. To simplify comparison with modeling and theory, experiments examined growth of ETI from various alloys of stainless steel as well as relatively void/inclusion free, 99.999% pure, diamond-turned, 1 mm-diameter aluminum rods. Aluminum surfaces included a variety of deliberately machined and well-characterized perturbations, including 10-micron-scale quasi-hemispherical voids, or “engineered” defects (ED), and sinusoidal patterns of varying wavelength and …

The Planning Strategy For Electric Vehicle Charging Stations In The Road Transportation Network Synchronized With The Distribution Network, Muthukannan S

Theses and Dissertations

Electric vehicles (EVs) are recognized as a potentially effective solution to the environmental crisis and fuel deficit that modern metropolises are currently experiencing. Meanwhile, the expansion of EVs and their haphazard charging would negatively affect the road transportation network (RTN) as well as the electric distribution network (EDN). The proper infrastructure for the electric vehicle charging station (EVCS) will enhance the effective utilization of energy of both the networks.

This research work proposes a two-phase planning strategy for deploying Electric Vehicle Charging Stations (EVCS), considering both static and dynamic factors. The strategy uses a hybrid PSO-DS algorithm which is a …