Engineering Commons^™

Optimization Of Bioethanol Production Using An Enzymatic Hydrolysis Process With Green Algae (Chaetomorpha) As The Raw Material, Teuku Maimun, Mirna Rahmah Lubis, Muhammad Aldi Zein, Wahed Febbry Andriansyah Ali

Makara Journal of Technology

Bioethanol is an alternative fuel derived from biological feedstock used to decrease the reliance on fossil fuels because of increasing energy consumption associated with population growth and increased use of oil fuels. Bioethanol production has been widely conducted using several types of algae, but the optimal conditions for the hydrolysis and fermentation processes are not explained in more detail. Therefore, this study focuses on determining the optimal conditions for hydrolysis and fermentation to maximize the bioethanol yield. This study uses optimization based on the hydrolysis time, temperature, and pH to increase the reducing sugar content using high-performance liquid chromatography in …

Modeling Soil Lateral Deformation Due To Water Film Using Smoothed Particle Hydrodynamics, Erly Bahsan, Budi Susilo Soepandji, Wiwik Rahayu, R.R. Dwinanti R. Marthanty, Budianto Ontowirjo

Makara Journal of Technology

In geotechnical engineering, large deformation in soil materials is rarely simulated using numerical methods, particularly the finite element method and finite difference method, because they experience difficulties in representing the postfailure soil behavior. As an alternative to these methods, the smoothed particle hydrodynamics (SPH) method has recently been adopted to represent soil behavior. The SPH method is a Lagrangian, mesh-free numerical method in which the materials are modeled as a set of particles. In this method, soil behavior can be represented via the Drucker–Prager elasto–plastic failure criterion. Thus, this method can be used to simulate postfailure soil behavior and large …

In Silico Modelling And Docking Simulation Of Egfr-Targeted Diphtheria Toxin Chimera With Various Targeting Moieties, Muhammad Afif Naufal Bmed, Benedictus Ansell Susanto Bmed, Talitha Dinda Gunawan Bmed, Azhar Ridha Lukman Bmed, Alifa Rahma Rizqina Bmed, Muhammad Misbahul Fuad Bmed

Indonesian Journal of Medical Chemistry and Bioinformatics

Introduction: Cancer is a major etiology of death worldwide due to high mortality and suboptimal medicine. However, an emerging field, targeted therapy enabled a more selective and effective therapeutic action. This article aims to analyze in-silico the hypothetical targeted therapy agent that is combinations of conjugate consisting of EGFR targeting moieties and diphtheria toxin (DT-390).

Method: Our novel peptide is a conjugate of a novel EGFR targeting peptide and DT-390, forming a chimera. The tertiary structure was predicted using AlphaFold 2.0. The best IDDT scoring and stereochemistry profiles were utilized. The HADDOCK2.4 webserver modelled the docking between our …

Synthesis Of A Control System For A Non-Stationary Dynamic Plant Based On A Regulator-Predictor, Isamiddin Hakimovich Siddikov, Begovot Sheraliyevich Ibragimov

Chemical Technology, Control and Management

The paper considers the issues of synthesizing a predictor controller as part of a control system for a non-stationary dynamic plant with a predictive model. Technological processes in industry, in essence, have non-stationarity properties, the parameters of which can change during the execution of technological operations. To control such nonstationary dynamic control plants, controllers built on the basis of predictive models have found wide application. The article is devoted to the issue of studying automatic control systems of a non-stationary dynamic plant with a base regulator-predictor. To synthesize a regulator - predictor, it is proposed to use a predictive model …

Developing Decision-Making Models And Algorithms To Help Prevent Emergencies, Mizaakbar Xakkulmirzayevich Hudayberdiyev, Oybek Zokirovich Koraboshev

Chemical Technology, Control and Management

The article is devoted to the solution of the scientific issue of decision-making support for the prevention and elimination of the consequences of emergency situations. The relevance of this issue is related to the need to develop a theoretical basis for optimizing the risk of adverse effects on human health and the environment in connection with emergency situations, and a predictive model for the development of emergency situations and their prevention or elimination of their consequences. The optimization of the importance measure of signs for predicting the values of the factors of fire conditions has been carried out. In addition, …

Mathematical Modelling Of The Solar Drying Of Apricot, Sarvar Rejabov, Botir Shukurillayevich Usmonov, Asqar Artikov, Komil Usmanov

Chemical Technology, Control and Management

Agricultural products provide significant growth in export earnings for many countries and provide food globally. Fruits and vegetables are perishable foods due to their high moisture content. Therefore, most agricultural products require post-harvest processing such as drying to extend the shelf life of fruits and vegetables and maintain nutrient quality. Solar drying is widely used for this purpose. Ambient temperature, humidity and solar radiation affect the drying time and quality of agricultural products, especially apricots, in solar dryers. The experiments were carried out in the same place (Tashkent, Uzbekistan) and in the same time interval. When the mass of apricots …

Review Of Fuzzy Models And Fuzzy Methods For Analysis Of Information In Conditions Of Emotional Decision Making, Latafat Gardashova, Royal Shirinov, Diana Boqdanova

Chemical Technology, Control and Management

In the modern world, decision-making often takes place in an environment of uncertainty and under the significant influence of emotional factors, which requires the use of special methods for analyzing information. This study is devoted to an overview of fuzzy models and methods that allow such factors to be taken into account when making decisions. In particular, the approaches based on fuzzy logic, fuzzy cognitive maps and fuzzy clustering methods that provide flexibility and adaptability in conditions of uncertainty are considered. The study analyzes examples of the application of these methods in various fields, including risk management, medical diagnostics and …

A Step By Step Shoreline Attribute Analysis For Selected Waterbodies In The Gulf Of Mexico To Promote The Use Of Living Shorelines, Christoper Boyd, Xutong Niu, Taylor R. Horn

Journal of Extension

Living Shorelines are being promoted by coastal extension professionals as a more resilient nature-based solution to control shoreline erosion. The Virginia Institute of Marine Sciences Living Shorelines Suitability Model was run in selected waterbodies within the Gulf of Mexico.

The locations of the selected water bodies, coastal data sets used, and shoreline protection recommendations generated by the Model are presented. A step-by-step statistical analysis conducted through ArcGIS Pro from these selected coastal shorelines will illustrate how extension professionals with novice GIS experience can use the model output to promote living shorelines to coastal property owners, city managers, and developers.

The Prospect Of Indonesian Herbal As An Alternative Treatment For Covid-19 Patient: A Literature-Based Study, Hadi Sunaryo, Wahyu Hidayati

Indonesian Journal of Medical Chemistry and Bioinformatics

Coronavirus disease 2019 (COVID-19) is a new disease caused by a novel coronavirus, Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). The disease has several symptoms from mild to severe and could lead to death for comorbidities and the elderly. Therefore, the infections and mortality cases keep growing day by day, moreover many authorities are trying to suppress it by applying several health protocols, including medicines. Several studies were conducted on drug discovery from plants to cure the disease. The article aimed to do a narrative review about the prospect of JAMU becoming an alternative medicine to cure COVID-19 by mapping …

Enhancing Predictive Accuracy Of Compressive Strength In Recycled Concrete Using Advanced Machine Learning Techniques With K-Means Clustering, Ziaul Haq Doost, Leonardo Goliatt, Mohammed Suleman Aldlemy, Mumtaz Ali, Bruno Da S. Macêdo

AUIQ Technical Engineering Science

The urgent need to mitigate environmental impacts in the construction industry drives the exploration of sustainable practices, such as the use of recycled materials in concrete production. The primary objective of this study was to enhance the predictability of compressive strength in the concrete through the application of advanced machine learning (ML) techniques, specifically Gradient Boosting Regression (GBR) and Random Forest Regression (RFR). Using a comprehensive dataset of 353 eco-friendly concrete samples, the study carefully developed and validated these models to evaluate their performance. The findings exposed that the GBR model outperformed the RFR model, obtained an R² of 0.97 …

Analysis Of Predicting Co-Authorship Networks Using Support Vector Machine Model, Mohammed Y. Al-Khuzaie, Sajad Ali Zearah, Abbadullah H. Saleh

AUIQ Technical Engineering Science

The area of computer science is flourishing, as shown by the rising number of academic works published and the rising number of scholars adding to the existing body of knowledge. This has made it difficult to find previously unrecognized links between publications and those studying them. Using machine learning techniques to foresee missing links and unveil hidden connections, complex network-based link prediction has emerged as a helpful resource in addressing this difficulty. This study aims to solve the problem of finding links between authors’ publications by exploring the use of network-based complex link prediction approaches. A large-scale bibliographic database collected …

A Technical Review On Reservoir Sedimentation And Their Mitigation Strategies, Sadique Khan

AUIQ Technical Engineering Science

Sedimentation in reservoirs is a critical concern of the 21^st century which has affected the sustainability and functionality of water retaining structures. This technical review paper on reservoir sedimentation provides a comprehensive analysis of their causes, mechanisms, and their mitigation/control techniques. The paper starts with sedimentation in the reservoir at a global scale focusing on natural (Soil Erosion) and anthropogenic (man-made) factors such as deforestation, land clearing for agricultural purposes, and urbanization contributing to sedimentation in the reservoir. The origin of sediment is heavily influenced by topographical features, with origins located far-reach, mid-reach and near the reservoir. The sedimentation …

Winning Results Of The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Winning Works From Journal Of Electrochemistry: The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 "Electrochemical Research Paradigms" Summer School Successfully Held, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Upcoming Meeting-The 1St Young Investigator Symposium On Electrosynthesis, Chinese Chemical Society, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

Recent Advances On Ruthenium-Based Electrocatalysts For Lithium-Oxygen Batteries, Yu-Zhe Wang, Zhuo-Liang Jiang, Bo Wen, Yao-Hui Huang, Fu-Jun Li

Journal of Electrochemistry

Rechargeable lithium-oxygen (Li-O₂) batteries have attracted wide attention due to their high energy density. However, the sluggish cathode kinetics results in high overvoltage and poor cycling performance. Ruthenium (Ru)-based electrocatalysts have been demonstrated to be promising cathode catalysts to promote oxygen evolution reaction (OER). It facilitates decomposition of lithium peroxide (Li₂O₂) by adjusting Li₂O₂ morphologies, which is due to the strong interaction between Ru-based catalyst and superoxide anion (O₂^–) intermediate. In this review, the design strategies of Ru-based electrocatalysts are introduced to enhance their OER catalytic kinetics in …

Rate Law For Photoelectrochemical Water Splitting Over Cuo, Bo-Yuan Gao, Wen-Hua Leng

Journal of Electrochemistry

Photocatalytic splitting of water over p-type semiconductors is a promising strategy for production of hydrogen. However, the determination of rate law is rarely reported. To this purpose, copper oxide (CuO) is selected as a model photocathode in this study, and the photogenerated surface charge density, interfacial charge transfer rate constant and their relation to the water reduction rate (in terms of photocurrent) were investigated by a combination of (photo)electrochemical techniques. The results showed that the charge transfer rate constant is exponential-dependent on the surface charge density, and that the photocurrent equals to the product of the charge transfer rate constant …

Numerical Analysis Of Explosion Characteristics Of Vent Gas From 18650 Lifepo4 Batteries With Different States Of Charge, Shi-Lin Wang, Xu Gong, Li-Na Liu, Yi-Tong Li, Chen-Yu Zhang, Le-Jun Xu, Xu-Ning Feng, Huai-Bin Wang

Journal of Electrochemistry

The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries. Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles, thereby promoting the application and development of lithium-ion batteries. Based on this understanding and combined with previous research on gas production from lithium-ion batteries, this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of …

2024 World Fuel Cell Conference Held In Ningbo, Zhejiang, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Polish Energy Sector’S Dependence On Lignite Mining: The Process Of Transition, Marek Widera, Wojciech Naworyta, Paweł Urbański

Journal of Sustainable Mining

This opinion study is devoted to the role of lignite in the Polish energy sector in recent decades, i.e., after the collapse of communism in 1989. Lignite is the primary source of electricity in Poland, second only to hard coal. More than 25–35% of Polish electricity was generated by lignite-fired power plants in 1990–2022. To meet the needs of the energy industry, 46–70 Mt of lignite was mined annually in that period. Hence, Poland was, and still is, one of the world leaders in lignite production. Despite the ongoing transition of the Polish energy sector, changes occur very slowly due …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Enrichment Patterns And Exploration Countermeasures Of Deep Coalbed Methane In The Linxing-Shenfu Block On The Eastern Margin Of The Ordos Basin, Xu Changgui, Ji Hongquan, Wang Cunwu, Zhu Xueshen

Coal Geology & Exploration

Objective Some insights have been gained into the enrichment and accumulation patterns of deep coalbed methane (CBM) in high-rank coal seams on the eastern margin of the Ordos Basin, represented by the Daning-Jixian block. However, the exploration of deep CBM in medium-rank coal seams in the Linxing-Shenfu block, located in the northern segment of the basin's eastern margin remains in its initial stage, leading to an inaccurate and unclear understanding of the enrichment and accumulation patterns. This necessitates summarizing these patterns to effectively guide deep CBM exploration and exploitation. Methods Focusing on the Nos.8 and 9 coal seams of the …

Discovery Of A Large Gas Field Of Deep Coalbed Methane In The Shenfu Block And Its Implications, Zhu Guanghui, Ji Hongquan, Mi Honggang, Zhang Yingchun, Sun Qiang, Zhao Wei, Zhu Xueshen, Kang Lifang, Wang Yuchuan

Coal Geology & Exploration

Background After explorations of unconventional natural gas for nearly two decades in the Shenfu block on the eastern margin of the Ordos Basin, deep coalbed methane (CBM) with reserves of 100 billion m³ was discovered in this block in 2023. However, the preliminary exploration of deep CBM in this block faces challenges of insufficient understanding of geological laws, immature fracturing technologies, and a lack of production technologies and experience.Methods and Results Driven by both management and technological innovations, encouraging exploration results have been achieved. The management innovations include: (1) The implementation of a complementary and three-dimensional exploration model …

Predicting The “Sweet Spot” Of Deep Coalbed Methane Based On Resource Conditions And Fracability, Zhao Zhigang, Zhu Xueshen, Wang Cunwu, Zhu Yanhe, Lyu Yumin, Chen Silu, Qi Yu, Tian Yongjing

Coal Geology & Exploration

Objective China has made breakthroughs in the exploration of large-scale deep coalbed methane (CBM) reservoirs along the eastern margin of the Ordos Basin. However, effectively converting the reserves of these reservoirs into production and achieving their efficient exploitation remain unclear. Methods Based on the geological, tests, fracturing, and production performance data, this study conducted research into the assessment of geological-engineering dual “sweet spots” of deep CBM in the southern Shenfu block by focusing on the resource conditions and fracability of deep CBM reservoirs. [Results and Conclusions] Key findings are as follows: (1) The study area hosts suitable coal-forming facies zones …

Critical Drilling And Completion Techniques For Deep Coalbed Methane In The Shenfu Block And Their Applications, Wang Peng, Li Bin, Wang Kunjian, Zhang Hongjie, Zhang Yingchun, Du Jia, Zhang Linqiang, Wang Xiaoqi, Su Haiyan, Chen Guanghui, Yang Ruiyue

Coal Geology & Exploration

Objective Deep coal seams exhibit high in-situ stress, moderate to high temperatures, ultra-low permeability, high compressibility, and significant heterogeneity, leading to the absence of mature technical systems for their exploitation presently. The complex geological characteristics of deep coal seams pose new technical challenges to their drilling and completion engineering, rendering it urgent to tackle theoretical and technical challenges in drilling and completion tailored to the geological characteristics of deep coal seam reservoirs. The purpose is to achieve the reserve growth and production addition of hydrocarbons in order to guarantee China’s strategic energy security. Methods Based on the pilot tests for …

Production Characteristics Of Deep Coalbed Methane Wells In The Linxing Block And Associated Their Influencing Factors, Wang Zhizhuang, Wu Peng, Sun Qiang, Liu Rui, Wang Lingbo

Coal Geology & Exploration

Objective The production characteristics of deep coalbed methane (CBM) are significantly distinguished from those of middle-shallow CBM, and even the production wells of deep CBM within the same block exhibit different characteristics. Given that relevant research remains in its exploratory stage, gaining a deeper understanding of the factors influencing the differences in production characteristics of deep CBM is significant for the production capacity prediction and production management of the subsequent large-scale production stage. Methods To determine the production characteristics of deep CBM in the Linxing block and their influencing factors, this study examined geological engineering factors including gas content, coal …

Optimization Of Schemes For Multi-Reservoir Commingled Fracturing Of Coal Measures In The Linxing Block, Wang Bo, Zhang Bing, Mi Honggang, Du Jia, Duan Jiajia, Cui Shuhui, Zhang Haozhe, Fu Tianyu

Coal Geology & Exploration

Objective The coal-bearing strata in the Linxing block on the eastern margin of the Ordos Basin exhibit the alternating occurrence of multiple sequences and vertical thin layers (interlayers). Therefore, multi-reservoir commingled fracturing is essential for the cost-effective, efficient exploitation of coal-measure gas from these coal-bearing strata. The key to successful multi-reservoir commingled fracturing is the achievement of expected fracture heights. The current challenges include the unclear vertically extended distance and morphologies of fractures, along with great deviations between the predicted and actual fracture heights, significantly affecting the volume of reservoirs for production growth. Methods Based on the in-situ stresses on …

Fracturing Characteristics And Instability Modes Of Deep Primary Coal-Rock Combinations Under Triaxial Compression, Li Chunyuan

Coal Geology & Exploration

[Objective] Deep coal-bearing strata contain primary interfaces and layered composite structures. Under the mining disturbance, the fracturing and instability of the primary composite structures of layered coal-rock combinations prove to be a principal cause of disasters such as water inrushes. [Methods] This study aims to explore the impacts of the structures of deep primary coal-rock combinations on the stability of layered rock masses during coal mining. Using fracturing tests under triaxial compression and CT-based reconstruction conducted in the laboratory, this study determined the fracturing differences between deep primary coal-rock combinations and single coal or rock masses. Based on the analyses …

A Cylindrical Permeation And Diffusion Model For Bingham Grout In Water-Rich Sand Layers And Its Experimental Research, Wang Xuesong, Cheng Hua, Yao Zhishu, Rong Chuanxin, Xie Bao

Coal Geology & Exploration

Objective The disaster prevention and control for water-rich sand layers pose a major challenge to the safe construction of tunnels and deep foundation pits. Typically, the impermeability and bearing capacity of highly water-rich and weakly cemented sand layers are enhanced through permeation grouting via sleeve valve tubes, with resulting grouting concretions being approximately cylindrical. Methods To explore the cylindrical diffusion mechanism of permeation grouting in sand layers, this study constructed a cylindrical diffusion model of radial tube flow for the permeation grouting of Bingham grout in sand layers while considering the tortuosity effects. Subsequently, this study developed a set of …