Engineering Commons^™

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Is Forensic Computing A Profession? Revisiting An Old Debate In A New Field, Bernd C. Stahl

Journal of Digital Forensics, Security and Law

Forensic Computing is a new and quickly developing field. It is in the process of becoming an academic discipline or sub-discipline with all the features from full undergraduate and postgraduate course provision to conferences and journals. An important question in this process of turning into an established discipline is whether it will coincide with the recognition of the graduates as professionals. This paper hopes to stimulate the debate as to whether forensic computing is or should be a discipline. In order to approach this question, the paper will discuss the concept of forensic computing including the most salient topics of …

Development Of An Ontology Based Forensic Search Mechanism: Proof Of Concept, Jill Slay, Fiona Schulz

Journal of Digital Forensics, Security and Law

This paper examines the problems faced by Law Enforcement in searching large quantities of electronic evidence. It examines the use of ontologies as the basis for new forensic software filters and provides a proof of concept tool based on an ontological design. It demonstrates that efficient searching is produced through the use of such a design and points to further work that might be carried out to extend this concept.

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

The 2006 Analysis Of Information Remaining On Disks Offered For Sale On The Second Hand Market, Andy Jones, Craig Valli, Iain Sutherland, Paula Thomas

Journal of Digital Forensics, Security and Law

All organisations, whether in the public or private sector, use computers for the storage and processing of information relating to their business or services, their employees and their customers. A large proportion of families and individuals in their homes now also use personal computers and, both intentionally and inadvertently, often store on those computers personal information. It is clear that most organisations and individuals continue to be unaware of the information that may be stored on the hard disks that the computers contain, and have not considered what may happen to the information after the disposal of the equipment.

In …

Computer Forensics Field Triage Process Model, Marcus K. Rogers, James Goldman, Rick Mislan, Timothy Wedge, Steve Debrota

Journal of Digital Forensics, Security and Law

With the proliferation of digital based evidence, the need for the timely identification, analysis and interpretation of digital evidence is becoming more crucial. In many investigations critical information is required while at the scene or within a short period of time - measured in hours as opposed to days. The traditional cyber forensics approach of seizing a system(s)/media, transporting it to the lab, making a forensic image(s), and then searching the entire system for potential evidence, is no longer appropriate in some circumstances. In cases such as child abductions, pedophiles, missing or exploited persons, time is of the essence. In …

The Influence Of Quantization Process On The Performance Of Global Entropic Thresholding Algorithms Using Electrical Capacitance Tomography Data, A. J. Mwambela

Tanzania Journal of Science

In measuring component fraction in multiphase flows using tomographic techniques, it is desirable to use a high speed tomography system capable of generating 100 tomograms per second. The electrical capacitance tomography system in this regard is considered to be the best among the available tomographic techniques. However, due to its inherent limitations the system generates distorted reconstructed tomograms necessitating the use of extra signal processing techniques such as thresholding to minimize these distortions. Whilst thresholding technique has been effective in minimizing distortions, the additional computation associated with the process limits the speed of tomogram generation desired from the system. Further, …

Laminar Film Condensation On A Horizontal Plate In A Porous Medium With Surface Tension Effects, Tong-Bou Chang

Journal of Marine Science and Technology–Taiwan

The problem of steady filmwise condensation on a finite-size horizontal plate embedded in a porous medium is studied for the case in which a cold plate faces upwards with a dry saturation vapor. Due to the effects of surface tension forces, there is a two-phase zone lying between the liquid film and the vapor zone. As in classical filmwise condensation problems, it is assumed that; (a) the inertia within the liquid film is negligible, and (b) the properties of porous medium, dry vapor, and condensate are constant. A dimensionless parameter Boc is introduced to characterize liquid flow due to surface …

Application Of Fuzzy Soil Classification In Visualizing 3-D Soil Strata, Jing-Wen Chen

Journal of Marine Science and Technology–Taiwan

The distribution of soil classes is an important factor in engineering design. In order to generate the soil class map, fuzzy soil classifications were developed to provide the means to characterize and quantify the soil classes, and then the spatial distribution of soil class can be interpolated by geostatistical method. For establishing continuous class soil maps, this paper present an index of fuzzy soil classification generated from principal component analysis (PCA). The ability of classification of the index is tested with a soil database which including 9,260 soil samples, and the accurate rate of simulation was 91.7%. There are two …

A Note On Grashof’S Theorem, Wen-Tung Chang, Chen-Chou Lin, Long-Iong Wu

Journal of Marine Science and Technology–Taiwan

In this paper, Grashof’s theorem is justified from the perspective of the occurrence of stationary configurations and uncertainty configurations of four-link chains. The link length relations at stationary configurations and uncertainty configurations are examined in detail based on the triangle inequality, and then the conditions for the existence of a crank and a change point are deduced.

An Adaptive Nonlinear Fuel Injection Control Algorithm For Motorcycle Engine, Tung-Chieh Chen, Chiu-Feng Lin, Chyuan-Yow Tseng, Chung-Ying Chen

Journal of Marine Science and Technology–Taiwan

The purpose of this research is to apply an adaptive fuel injection control algorithm on a motorcycle engine and evaluate its performance. A highly nonlinear switching type EGO sensor is used to measure the air fuel ratio of the engine. In the research, the nonlinear control algorithm is developed based on a Lyapunov function. Furthermore, an observer is also applied to estimate the air flow rate into the combustion room. The results show that the air fuel ratio and engine speed are stable under steady manoeuvres and the air-fuel ratio values are satisfactory.

The Optimization Of The Reliability And Construction Cost Of Rc Bridges, Wen-Hu Tsao, Chi-Way Lin, Ming-Te Liang, Wen-Lung Wen-Lung Tsao Tsao

Journal of Marine Science and Technology–Taiwan

In this paper, the relationship between reliability and engineering system construction cost for obtaining optimum reliability was studied. This proposed approach was applied to the repair alternatives of existing reinforced concrete (RC) bridges for acquiring the result of optimization analysis. According to the D(degree) E(extent) R (relevancy) evaluation method, which is widely used by civil engineers in Taiwan the existing RC bridges with and without stridden rivers can be divided into 21 and 17 substructures, respectively. The use of the weighting value and the cost relation is to attain the relationship between the total engineering system construction cost and the …

Ole Miss Engineer 2005

Ole Miss Engineer

No abstract provided.

The Procedural Due Process Requirements For No-Fly Lists, Soumya Panda

The University of New Hampshire Law Review

[Excerpt] “Imagine arriving at the airport and checking in at the ticketing booth. You tell the ticketing agent your name, your flight number, and show the agent your identification. The agent enters the information into the terminal and a look of shock appears on his or her face. While other passengers are waiting behind you, the agent calls for security and mentions in front of other passengers that you are denied from boarding the plane. Now imagine that you are a famous United States senator arriving from a political convention and the ticketing agent tells you that you cannot board …

Bayer Ag V. Housey Pharmaceuticals: Protection For Biotechnological Research Tools Under Section 271(G) Found Wanting, Matthew Barthalow

The University of New Hampshire Law Review

[Excerpt] "Research tools, a subset of biotechnological inventions protected by process patents, are “tools that scientists use in the laboratory, including cell lines, monoclonal antibodies, reagents, animal models, growth factors, combinatorial chemistry and DNA libraries, clones and cloning tools (such as PCR), methods, laboratory equipment and machines.” Many companies base their business models on the ability to find pharmaceutical products using their proprietary drug discovery research tools. Research tools used for drug discovery ‘include bioinformatic methods for identifying the interaction of certain proteins and their association with disease, methods for confirming protein targets, screening assays to identify molecules active against …

Bs News

Building Services Engineering

No abstract provided.

A Study Of Overcharge Characteristic Of Lithium-Ion Cells, Jing Pang, Shi-Gang Lu, Sha Liu

Journal of Electrochemistry

The overcharge characteristics and effect factors of lithium-ion cells containing LiMn₂O₄ cathodes were studied in detail. Overcharge testing of Lithium-ion cells with a systematic variation in the cell balance demonstrated that the overcharge characteristics of Lithium-ion cells was affected by the amount of cathode in the cells, which is independent of the amount of anode material. The rate of charge was found to be an important parameter, as electrolyte complete decomposition at low charge rates caused the end of overcharge testing, while high charge rates accelerated the rate of heat generation in the cells and the cell …

The Deactivation Mechanism Of Metal Oxide Anodes Under Alternative Current Electrolysis Condition, Jun-Tao Wang, Yan Han, Guang-Zhang Chen, Wen-Fa Liu

Journal of Electrochemistry

The metal oxide anodes coated on titanium used in seawater electrolysis were prepared by thermal decomposition. Their morphologies, compositions and phase structures were determined by scanning electron microscope(SEM), energy dispersive X-ray detector(EDX) and X-ray diffraction(XRD). The electrochemical properties of the anodes were characterized by accelerated life test, cyclic voltammetry and electrochemical impedance spectroscopy. SEM, EDX and XRD showed that solid solution structures of (Ru, Ir, Ti)O₂ and (Ir, Ti)O₂ were formed after pyrolysis, the solid solution structures and active components were disappeared after the deactivation of the anodes. Electrochemical results indicated that the active area decreased and the …

Solid Oxide Fuel Cells-Materials And Prospects, Molenda Janina, Marzec Jacek

Journal of Electrochemistry

The paper summarizes and discusses the basic properties of solid oxide fuel cell (SOFC) components (electrode materials and electrolyte) from the point of view of their essential functional parameters suck as chemicalstability, transport, catalytic and thermomechanical properties under operational conditions in a SOFC. An interrela-tion between the defect structure of these materials related to oxygen nonstoichiometry and their electronic propertiesand catalytic activity was shown. Single-chamber fuel cell concept was also presented.

The Optimal Sulfonation Conditions Of Self-Doped Polyaniline Obtained By Using Experimental Strategies, Wen-Yar Li, Chi-Chang Hu

Journal of Electrochemistry

The optimal sulfonation condition of self-doped sulfonated polyaniline (prepared from leucoemeraldinebase; denoted as LEB-SPANI) with a high electronic conductivity was obtained by experimental strategies, includingthe fractional factorial design (FFD) and central composite design (CCD). From the FFD experiment, the self-doped LEB-SPANI prepared at a lowtemperature (4℃), a short reaction time (1 h), and a small volume of fumingsulfuric acid (10 mL) showed a better conductivity (ca.127 mS/cm). In the CCD study coupled with a confirmationtest, the highest conductivity (ca.141 mS/cm) of the LEB-SPANI film was obtained under a sulfonation temperatureof 4℃, a sulfonation time of 75 minutes, and a volume …

A Study Of Three Corrosion Inhibitors For Reinforcing Steel In Sps Solution By Electrochemical Methods, Bing Zhao, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

Some electrochemical techniques such as linear polarization,electrochemical noise and EIS have been employedto study the inhibition behavior of N-lauroyl sarcosinate, β-sodium glycerophosphate and D-sodium gluconate for the reinforcing steel immersed in simulated concrete pore solution(SPS) with NaCl addition.The results show that D-sodium gluconatehas an obvious inhibitive effect for the reinforcing steelin containing Cl^- SPS solution. It has been proposed that the corrosion inhibition of D-sodium gluconate is due to its competitive adsorption and precipitation on steel surface in the simulated concrete environment.

An Investigation On Poly(Vinyl Chloride-Co-Isobutyl Vinyl Ether) Coatings Modified By Rutile Nano-Tio2 Pastes, Xiang Bin, Sheng-Tao Zhang, Yan Li, Bao-Rong Hou

Journal of Electrochemistry

The anti-corrosion coating of Poly(Vinyl Chloride-Co-Isobutyl Vinyl Ether) (PVCCIVE) was modified by rutile nano-TiO₂. The influence of nano-TiO₂ pastes on the coating's corrosion resistance was investigated through electrochemistry impedance spectroscopy (EIS). The results show that the addition of nano-TiO₂ pastes does not have obvious effect on the coating's performance of adhesion, flexility, impact resistance, but improves the coating's UV resistance and the gloss.Meanwhile,with the proper addition of rutile nano-TiO₂ pastes, the anti-corrosion behavior of the coating was advanced.

Copper Electrodeposition Under The Perturbation Of Hard Particles, Zeng-Wei Zhu, Di Zhu

Journal of Electrochemistry

Copper electrodepositon was carried out on the rotating cathode,with hard particles(such as ceramic beads) filling between the electrodes. The rotation of cathode led hard particles to polish and impact the surface of deposit during electrodeposition.Copper deposits with a mass of cuspidal nodules were produced in acid sulfate solutions while brittle deposits without nodules were produced in alkaline sulfate solutions. It was also found that brightening and smoothing deposit could be obtained from the alkaline solution, and the deposit was approximatively disordered orientation with granular morphology of about 100~300 nm. The results show that the polishing and impact of hard particles …

Silicides And Composites Materials As Anodes For Lithium Ion Batteries, Jun-Mei Yan, Hui-Zhen Huang, Jing Zhang, Yong Yang

Journal of Electrochemistry

The anode materials of Mg₂Si and MnSi were synthesized by mechanically activated annealing(MAA) techniques in this work and the in electrochemical performances were also studied.A series of composite materials of Mg₂Si and CNTs or CMS were prepared by ball-milling method respectively. The reversible capacities of the composites were higher than that of the pure Mg₂Si and pure carbon materials.The cyclic performances have been improved greatly by ball-milling of the Mg₂Si and carbon materials. Results show that ball-milling method is one kind of method to make alloy materials into practical use.

Electrochemical Disinfection Method To Treat Wastewater From Hospitals, Zhi-Fu Li, Ya-Dong Tan, Ning Xu, Shao-Hong Ren, Yu Zhao

Journal of Electrochemistry

Electrochemical disinfection method was used to treat wastewater from hospitals. The mechanism of electrochemical disinfection was researched by using the different anode materials. The results showed that when the titanium coated with noble metal (Ru, Pt, Ir)oxide was used as an anode and stainless steel as a cathode, the current density was 6 mA/cm², hydraulic retention time was 15 min,air flow rate was 40 L/h, the rate of anode effective area to the inner water volume was 1.0, the amount of total colibacillus was below 500 CFU/L after electrochemical disinfection,All these meet the first order of Effluent Discharge …

A Continuous Operation For Electroreduction Of Oxalic Acid To Glyoxylic Acid, Xiao-Hui Hu, Xiang-Fei Yan, Yu-Zhong Su, Jun Li, Qing-Biao Li

Journal of Electrochemistry

A simulative-continuous-operation approach was proposed to study the continuous operation for electroreduction of oxalic acid to gloxylic acid using a packed bed reactor and a parallel reactor with cooled cathode in order to solve the low productivity problem in current state by using traditional reactor. The effects of the concentration of oxalic acid and temperature on this process were also studied. Results showed that,after 30min of the reaction(residence time), the mass fraction of the produced glyoxylic acid in the catholic solution could reach 3.76% and 3.66% with respect to a saturated oxalic acid method and a step-temperature decreasing method. From …

The Mechanism Of Ethylenediamine On Electroless Ni-B Alloy Deposition, Sen-Lin Wang

Journal of Electrochemistry

The effects of ethylenediamine stabilizer on the deposition rate and on the stability of the plating bath for electroless deposition of Ni-B alloy were investigated. It was found that the addition of ethylenediamine greatly enhances the stability of the electroless plating bath. The electrochemical polarization including cathodic and anodic polarizations measurements were carried out to examine the effect of ethylenediamine on the deposition process. The results show that ethylenediamine affects both the cathodic and the anodic polarization processes. The oxidation current of the reducer and the reduction current of Ni-B alloy decrease greatly when ethylenediamine was added into the plating …

Electrochemical Controllable Preparation Of Hydroxyapatite Coating With Different Morphologies And Preliminary In Vitro Tests, Hai-Yan Shi, Ren Hu, Chang-Jian Lin

Journal of Electrochemistry

The Controllable electrochemical deposition has been developed to prepare the hydroxyapatite(HA) coatings on Ti substrate with different morphologies and structures. Three kinds of typical topography of HA coatings, i.e. standing-up, flower and ordered porous structures have been obtained. The XRD and FTIR results demonstrate high crystallinity of the coating and exclusion of other forms of calcium phosphates. In vitro tests reveal that the biological property is largely dependent on the structure and morphology of the HA coating. It has been found that all pure HA coating show good biocompatibilities, while only the HA coating with ordered porous structures exhibits best …

Electrochemical Oxidation Of Organic Additives In Tin Plating Electrolytes, Yin-Mei Cheng, Lan-Kun Cai, Qiang Song

Journal of Electrochemistry

Cyclic voltammetry(CV) was used to characterize the voltammetric behaviours of organic additives, e.g. PSA(phenolsulfonic acid) EN(ethoxylatedα-naphthol) and ENSA(ethoxylatedα-naphthol sulfonic acid), on the anode surface. In PSA solutions, an anodic peak was obtained and the peak potential was about 1.2V. In EN and ENSA solutions, two anodic peaks were obtained and the peak potentials were about(0.95V) and 1.3V. The products of galvanostatic electrolysis were separated by HPLC(high performance liquid chromatography) and analyzed by EI/MS(electron ionizing mass spectrometry). The mechnism of the electrochemical oxidation was also disussed.