Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Journal

Discipline
Institution
Keyword
Publication Year
Publication
File Type

Articles 23821 - 23850 of 27383

Full-Text Articles in Engineering

Survey Of Wind Power Potential For Wind-Based Electricity At Makambako, Iringa Tanzania, Rmr Kainkwa Nov 2008

Survey Of Wind Power Potential For Wind-Based Electricity At Makambako, Iringa Tanzania, Rmr Kainkwa

Tanzania Journal of Science

The potential for wind-generated electricity is examined using 22 months wind data collected from a prospective site located in the southern highlands of Tanzania. While the data for the year 2001 was from March to December that of 2002 was for all the twelve months of the year.Characteristics of monthly and annual wind speed and direction are systematically investigated based on hourly time-series data using Windographer software. The Weibull shape factors k corresponding to a height of 50 m were found to be 3.10 and 3.80 while the scale factors c were 11.06 and 12.27 m/s for the years 2001 …

Go to article

Behavior Of Copper Electrodeposition In Copper Electroplating Solution With Different Peg Molecular Weight, Lie Yin, Zeng-Lin Wang Nov 2008

Behavior Of Copper Electrodeposition In Copper Electroplating Solution With Different Peg Molecular Weight, Lie Yin, Zeng-Lin Wang

Journal of Electrochemistry

The effect of the polyethylene glycol(PEG) molecular weight(MW) upon via-hole filling with diameter of 50 μm and aspect ratio of 1 in the acid copper plating solution was studied.The cathodic polarization in copper electroplating bath with PEG of different molecule weights was investigated by linear sweep voltammetry.The surface roughness,crystallography,and the resistivity of copper films were characterized by X-ray diffraction(XRD),atomic force microscopy(AFM) and the four-point probe measurements.The results showed that the polarization on the cathode and the hole-filling capability of electroplating copper bath were increased evidently with an increase of PEG molecular weight from 600 to 8000.When the PEG MW was …

Go to article

Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu Nov 2008

Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu

Journal of Electrochemistry

A highly-sensitive and mercury-free method of determining iodate ion in table salt was established based on carboxylic carbon nanotubes modified carbon paste electrode.In 0.1 mol/L NaOH solution,there was a sensitive cathodic stripping peak on voltammograms.The stripping peak potential was-0.52 V when accumulation time of IO-3 at the modified electrode was 60 s and the potential scan rate was 300 mV/s.There was a good liner relationship between the peak current and IO-3 concentration in the range of 8.0×10-10 ～ 5.0×10-8 mol/L and 1.0×10-7 ～ 3.0×10-6 mol/L with the correlation coefficient of 0.999 and 0.998,respectively.The detection limit was …

Go to article

Primary Study Of Tiron As Active Materials For The Redox Flow Battery, Yan Xu, Yue-Hua Wen, Jie Cheng, Yu-Sheng Yang, Zi-Li Xie Nov 2008

Primary Study Of Tiron As Active Materials For The Redox Flow Battery, Yan Xu, Yue-Hua Wen, Jie Cheng, Yu-Sheng Yang, Zi-Li Xie

Journal of Electrochemistry

Effects of solution pH on the electrochemical behavior of tiron(sodium 4,5-dihydroxy-1,3-benzendisulfonic) couple(on a graphite electrode) were studied by cyclic voltammetry in aqueous solutions.It is shown that at pH<4,tiron exhibited a redox process at a relatively high potential with a good reversibility.A redox flow battery was formed employing tiron as the positive active species and V(III)/V(II) as the negative redox couple.In sulfuric acid medium,the coulombic efficiency of the tiron-V redox flow cell was more than 90% with a good cycle life.The decay in the cycle performance was minimal.Therefore,the feasibility of tiron as active materials for redox flow battery application is demonstrated.

Go to article

Combustion Product Characterization Of The Iron-Heated Powders In Thermal Batteries, Jin Chong, Xue-Ping Gao, Ji-Qiang Wang Nov 2008

Combustion Product Characterization Of The Iron-Heated Powders In Thermal Batteries, Jin Chong, Xue-Ping Gao, Ji-Qiang Wang

Journal of Electrochemistry

The combustion products of thermal battery used iron-heated powders have been studied.It is identified by X-ray diffraction (XRD) analysis that the main compositions of the combustion products are Fe, FeO and KCl. The transmission electron microscopy(TEM) shows a typical core-shell structure with un-reacted Fe particle core coated by FeO shell with a shell thickness of around 200 nm. The combusted iron-heated powders exhibit no metal property, which is contrast to previous assumption. Further measurement indicates that at the ambient temperature the combustion products show semiconductor property of the p-type with conductivity in the order of 103 S·cm-1, which …

Go to article

Preparation And Electrocatalystic Performance Of Ir/C Catalyst For Ammonia Oxidation, Qing-Mei Kong, Yi-Ping Han, Ling-Juan Deng, Tian-Hong Lu, Ya-Wen Tang Nov 2008

Preparation And Electrocatalystic Performance Of Ir/C Catalyst For Ammonia Oxidation, Qing-Mei Kong, Yi-Ping Han, Ling-Juan Deng, Tian-Hong Lu, Ya-Wen Tang

Journal of Electrochemistry

The Ir/C catalyst with 30%(by mass) Ir was prepared in the CH3CH2OH and H2O binary system.The X-ray diffraction(XRD) data showed that the average sizes of the Ir particles in the Ir/C catalyst was about 2.2 nm.The results of the electrochemical measurements indicated that the electrocatalytic activity of the Ir/C catalyst for the ammonia oxidation in the neutral NaClO4 solution was similar to the Ir catalyst,while electrocatalytic stability was much better than that of the Ir catalyst.Furthermore,the peak current density of the ammonia oxidation at the Ir/C catalyst electrode showed a good linear relationship …

Go to article

Direct Electrochemistry Of Chloroperoxidase At Gc Electrode Modified With Swnts, Hong-Xia Zhang, Xia-Qin Wu, Wen-Jing Hou, Wen Xie, Zhong-Qing Lu, Rong Wang, He-Xing Li Nov 2008

Direct Electrochemistry Of Chloroperoxidase At Gc Electrode Modified With Swnts, Hong-Xia Zhang, Xia-Qin Wu, Wen-Jing Hou, Wen Xie, Zhong-Qing Lu, Rong Wang, He-Xing Li

Journal of Electrochemistry

The chloroperoxidase(CPO) was immobilized onto the surface of SWNTs modified electrodes.The electrochemical behaviors of modified electrode have been investigated by cyclic voltammetry.The appearance of a pair of well-defined redox peaks in the CV curve indicated that SWNTs can promote the electron transfer reaction of CPO.The results of cyclic voltammetry in PBS of different pH,from 3~9,showed that the reaction of CPO on the modified electrode was with equal numbers of electron and protein.This readily prepared SWNTs modified electrode showed excellent stability and good catalysis to O2.

Go to article

Preparations Of Composite Electrodes Of Pt With HXWo3 And Catalytic Activity Toward Oxygen Reduction Reaction, Pan-Pan Guo, You-Ju Huang, Hong-Yan Yang, Wei Li, Qing-Long Zhang, Wei-Shan Li Nov 2008

Preparations Of Composite Electrodes Of Pt With HXWo3 And Catalytic Activity Toward Oxygen Reduction Reaction, Pan-Pan Guo, You-Ju Huang, Hong-Yan Yang, Wei Li, Qing-Long Zhang, Wei-Shan Li

Journal of Electrochemistry

Three composite electrodes of platinum with hydrogen tungsten bronze(HxWO3)were prepared by voltammetry: hydrogen tungsten bronze deposited on platinum(HxWO3/Pt);platinum deposited on hydrogen tungsten bronze(Pt/HxWO3) and codeposited platinum and hydrogen tungsten bronze(Pt-HxWO3).The eletro-catalytic activities of three electrodes toward oxygen reduction reaction were studied.It is found that the catalytic activity of platinum can be improved by introducing with hydrogen tungsten bronze.Among these composite electrodes Pt/HxWO3,and the electrode shows the best eletro-catalytic activity toward oxygen reduction reaction,hence,provides a new way for reducing loading of …

Go to article

High Performance Fuel Cell Catalyst And 5kw Pemfc Stack Without Humidification At Room Temperature And Atmosphere, Xin-Fa Hu, Min Chen, Shi-Jun Liao Nov 2008

High Performance Fuel Cell Catalyst And 5kw Pemfc Stack Without Humidification At Room Temperature And Atmosphere, Xin-Fa Hu, Min Chen, Shi-Jun Liao

Journal of Electrochemistry

The Pt/C catalyst with high dispersion and high performance was prepared successfully by an organic colloidal method and small batch production(10g) of Pt/C catalyst has been realized.The particle sizes of the active components in the catalyst could be as small as 2.8 nm and the active surface area was up to 450 m2/g.A high performance membrane-electrode assembly(MEA) with surface area of 275 cm2 has been prepared by using the home-made catalyst with a catalyst coated membrane method invented in the lab,and a 5 kW stack has been assembled.The stack showed working 10 h at room temperature,atmosphere and …

Go to article

Ceo2/Pt Composite Electrodes And Their Catalytic Performance, Ying Fu, Zi-Dong Wei, Yong-Chao Feng, Xin-Li Ma, Ming-Jia Liao, Chao Liao, Jie Zhang, Huan Zhang Nov 2008

Ceo2/Pt Composite Electrodes And Their Catalytic Performance, Ying Fu, Zi-Dong Wei, Yong-Chao Feng, Xin-Li Ma, Ming-Jia Liao, Chao Liao, Jie Zhang, Huan Zhang

Journal of Electrochemistry

In this paper,the cerium oxide(CeO2) nanoparticles were electrochemically deposited on a Pt electrode by potentiostatic deposition(psd) and potential pulse deposition(ppd) to form CeO2/Pt composite electrodes,CeO2/Pt(psd) and CeO2/Pt(ppd).The properties of the CeO2 were characterized by field emission scanning electron microscope(FESEM) and X-ray diffraction(XRD).The results showed that the CeO2 nanoparticles prepared by psd and ppd were homogeneous and dense.The methanol oxidation reaction(MOR) and oxygen reduction reaction(ORR) on the Pt electrode were enhanced with the introduction of CeO2 into Pt.In addition,the catalytic capability of the CeO2/Pt electrode can be further …

Go to article

Voltammetric Determination Of L-Cysteine At Bipyrine Bridged Copper(Ⅱ) Complex Modified Glassy Carbon Electrode, Ming-Yan Wang, Fan Yang, Sheng-Yu Zhang, Xing-You Xu, Xu-Jie Yang Nov 2008

Voltammetric Determination Of L-Cysteine At Bipyrine Bridged Copper(Ⅱ) Complex Modified Glassy Carbon Electrode, Ming-Yan Wang, Fan Yang, Sheng-Yu Zhang, Xing-You Xu, Xu-Jie Yang

Journal of Electrochemistry

A modified electrode has been constructed by depositing a novel copper(Ⅱ) complex 2biPy(ClO4)4 on the glassy carbon electrode through the method of cyclic voltammetry(CV).It was found that the modified electrode exhibited high electrocatalytic activity toward L-Cysteine oxidation with good reproducibility and high sensitivity.The peak current of semi-derivative linear scan was proportional to the concentration of L-cys in the range of 1×10-6～3×10-4 mol·L-1.The detection limit was 5×10-7 mol·L-1.

Go to article

Study On The Texturization Of C-Si Wafers By Different Kinds Of Alkaline For Heterojunction Solar Cells, Yu-Hua Dou, Yu-Qin Zhou, Mei-Fang Zhu, Shuang Song, Feng-Zhen Liu, Jin-Long Liu, Zhan-Jun Zhang Nov 2008

Study On The Texturization Of C-Si Wafers By Different Kinds Of Alkaline For Heterojunction Solar Cells, Yu-Hua Dou, Yu-Qin Zhou, Mei-Fang Zhu, Shuang Song, Feng-Zhen Liu, Jin-Long Liu, Zhan-Jun Zhang

Journal of Electrochemistry

The texturization of(100) crystalline silicon(c-Si) wafer was studied by field-emission scanning electron microscope using different kinds of etchant: sodium hydroxide,sodium carbonate and tribasic sodium phosphate.By optimizing the etching parameters,the lowest values of averaged reflectance(Rav) were obtained to be 9.70% for NaOH,9.76% for Na2CO3 and 8.63% for Na3PO4·12H2O,which is comparable to that of the wafer with textured surface covered with an anti-reflection coating of either silicon nitride or thermally grown silicon dioxide.The relation of Rav and surface morphology of textured wafer was analyzed.Moreover,special emphasis was put on the role of isopropyl alcohol(IPA) …

Go to article

The Hydrothemal Synthesis Of Nanoscale Lifepo4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong Nov 2008

The Hydrothemal Synthesis Of Nanoscale Lifepo4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The cathode materials of LiFePO4 were prepared via a hydrothermal reduction method using FeCl3 as Fe source and iron as a reducing agent.The results showed that ferric salt could be reduced to ferrous salt completely under the hydrothermal condition and pure-phase LiFePO4 was obtained based on the test results of XRD and FTIR. Carbon-coated LiFePO4 was synthesized by pyrolysisng glucose at high temperature. The morphologies of pure LiFePO4 displayed cluster-like while the LiFePO4/C displayed sphere-like particles. The electrochemical test showed that the LiFePO4/C had good rate performance,while LiFePO4 delivered much …

Go to article

Studies Of Surface Diffusion In Pemfc Electrodes, Jiang-Shui Luo, Jian Chen, Bao-Lian Yi, Chuan-Sin Cha, Hua-Min Zhang Nov 2008

Studies Of Surface Diffusion In Pemfc Electrodes, Jiang-Shui Luo, Jian Chen, Bao-Lian Yi, Chuan-Sin Cha, Hua-Min Zhang

Journal of Electrochemistry

A PEMFC electrode consisting of dual-layer catalyst layer(CL) was fabricated in this work. The outer CL was Nafion-free,while the inner CL was Nafion-bonded. The effects of Pt/C catalyst in the outer CL that did not contact with Nafion on the current generation in PEMFC electrodes were investigated. Cyclic voltammetric studies indicated that the Pt/C catalyst in the outer CL without direct contact with Nafion was still electrochemically active in taking part in the adsorption/desorption of hydrogen and the electrochemical oxidation/reduction of the oxygen-containing species occurring at the interface of "Pt/Nafion" in the inner CL. The polarization curves showed that the …

Go to article

Synthesis Of The Lifepo4 By Co Reduction: Reaction Mechanism And Kinetics, Yun-Hua Chen, Yong Yang Nov 2008

Synthesis Of The Lifepo4 By Co Reduction: Reaction Mechanism And Kinetics, Yun-Hua Chen, Yong Yang

Journal of Electrochemistry

LiFePO4 cathode material was synthesized by CO reducing FePO4 and LiOH precursors.The structure,morphology and electrochemical performances of such LiFePO4 material were characterized by XRD,SEM and charge-discharge tests.It was shown that the particle size of the LiFePO4 synthesized with 5% excess of LiOH in the precursor was about 200 nm.By carbon coating,the LiFePO4 electrode was able to deliver a reversible capacity of 158 mAh·g-1 at 0.1C discharge rate.Temperature-programmed X-ray diffraction was employed to monitor the reaction during the formation of LiFePO4,and Li3Fe2(PO4)3 was found to be …

Go to article

Preparation And Optical Transmission Of The Zno Nanorod Array Films, Feng Ye, Jing-Jing Li, Tong-Tao Wang, Yong-Liang Wang, Yun Liu, Xin-Dong Wang Nov 2008

Preparation And Optical Transmission Of The Zno Nanorod Array Films, Feng Ye, Jing-Jing Li, Tong-Tao Wang, Yong-Liang Wang, Yun Liu, Xin-Dong Wang

Journal of Electrochemistry

By using a galvaostatic electrodeposition method in the ZnCl2 solution,the highly oriented ZnO nanorod array films have been successfully prepared on ITO substrate after the pretreatment with ZnO nanoparticles.And they were characterized by scanning electron microscope,X-ray diffraction and transmittance spectra.The results indicated that the ZnO nanorod arrays grew along(001) direction with an orientation perpendicular to the substrate.When the wavelength of incident was over 380 nm,the ZnO nanorod arrays showed high optical transmission of above 95%.Furthermore,the band gap became narrower.

Go to article

Ec-Pt/Cnts Glucose Oxidative Electrode, Jia-Hua Liang, Chun-Mei Zhou, Hong-Juan Wang Nov 2008

Ec-Pt/Cnts Glucose Oxidative Electrode, Jia-Hua Liang, Chun-Mei Zhou, Hong-Juan Wang

Journal of Electrochemistry

A glucose oxidative electrode(GOD),EC-Pt/CNTs glucose oxidative electrode,was constructed by ethyl cellulose(EC) and Pt/CNTs.The sensitivity of the EC-Pt/CNTs GOD is 0.85 μA/mM in the concentration range of 0～4 mmol/L of glucose.After dipped in PBS(4℃) for 18 days,the activity of the EC-Pt/CNTs GOD can reach 80%.It is promising for the EC-Pt/CNTs GOD to be used to construct glucose biosensor.

Go to article

Corrosion Inhibition Of Magnesium Alloy In 3.5% Nacl Medium By Tungstate, Ling-Jie Li, Zhi-Ming Yao, Jing-Lei Lei, Dong-Hai He, Sheng-Tao Zhang, Fu-Sheng Pan Nov 2008

Corrosion Inhibition Of Magnesium Alloy In 3.5% Nacl Medium By Tungstate, Ling-Jie Li, Zhi-Ming Yao, Jing-Lei Lei, Dong-Hai He, Sheng-Tao Zhang, Fu-Sheng Pan

Journal of Electrochemistry

Electrochemical impedance spectroscopy(EIS),Tafel polarization curves and scanning electron microscopy(SEM) were used to study the corrosion inhibition of AZ61 magnesium alloy in 3.5% NaCl medium with tungstate.Results showed that tungstate demonstrates strong inhibition to the corrosion of AZ61 magnesium alloy.At the concentration of 0.01 mol/L,tungstate has a high inhibition efficiency 75.5%.Tungstate is an anodic inhibitor that mainly inhibited the anodic reactions of magnesium alloy through forming a compact protective layer that covered the magnesium alloy surface active sites.

Go to article

Electrochemical Behavior And Determination Of Paracetamol On Activated Glassy Carbon Electrode, Bao-Yu Tan, Fang Liao, Xiao-Ying He, Qing-Tao Zhu, Jun Hua, Xiao-Li Jiang Nov 2008

Electrochemical Behavior And Determination Of Paracetamol On Activated Glassy Carbon Electrode, Bao-Yu Tan, Fang Liao, Xiao-Ying He, Qing-Tao Zhu, Jun Hua, Xiao-Li Jiang

Journal of Electrochemistry

The electrochemical behavior of paracetamol(PCT) was studied at glassy carbon electrode activated by cyclic voltammetry.In HAc-NaAc buffer solution(pH=4.00),a couple of sensitive redox peaks were recorded about 0.54 V in the cyclic voltammograms.The result indicated that the process was controlled by adsorption and nearly reversible.The reaction electron and proton numbers were estimated,respectively,to be two.Excllent linearity was observed in the correlation between the oxidation peak current and the concentration of PCT in the range of 8.00×10-6～2.00×10-4 mol·L-1.The correlative coefficient was-0.999 18.The detection limit was 6.34×10-6 mol·L-1.This method can be used for the determination of PCT real …

Go to article

Fabrication Of Superhydrophilic Aluminum Oxide Through Single-Step Anodic Oxidation, Qin Zhang, Qi-Ming Yin, Jia-Ming Ye, Yuan-Rong Zhu Nov 2008

Fabrication Of Superhydrophilic Aluminum Oxide Through Single-Step Anodic Oxidation, Qin Zhang, Qi-Ming Yin, Jia-Ming Ye, Yuan-Rong Zhu

Journal of Electrochemistry

Hydrophilic aluminum oxide is popularly used for heat exchanger of air-condition.Herein,we developed a simple method to prepare superhydrophilic aluminum oxide on the surface of aluminum through single-step electrochemical oxidization.The morphologies and water contact angles on surfaces of alumina fabricated under different electrochemical conditions were investgated.Superhydrophilic surfaces fabricated by this method have good stability and high mechanical strength with water contact angle almost 0°.Coated with low surface energy materials,superhydrophilc alumina will be converted to superhydrophobic.

Go to article

Isolation Of Methyl Laurate From Coconut Oil As Raw Material For Fatty Alcohol Sulfate, Rita Arbianti, Tania Surya Utami, Astri Nugroho Nov 2008

Isolation Of Methyl Laurate From Coconut Oil As Raw Material For Fatty Alcohol Sulfate, Rita Arbianti, Tania Surya Utami, Astri Nugroho

Makara Journal of Technology

Isolation of Methyl Laurate from Coconut Oil as Raw Material for Fatty Alcohol Sulfate. Methyl laurate is a raw or base material for many industries, including surfactant industries. In this research, coconut oil (VCO) is transesterified with methanol to produce methyl ester, using NaOH as the catalyst. Methyl laurate is then separated by method based on the difference in melting point. This research focuses at determining the effects of some variables in transesterification on the concentration of produced methyl laurate. The variables are temperature (40 oC, 50 oC, 60 oC, 80 oC), time of transesterification reaction (0,5 hour, 1 hour, …

Go to article

The Decompositioning Of Volatile-Matter Of Tanjung Enim Coal By Using Thermogravimetry Analyzer (Tga), Nukman Nukman Nov 2008

The Decompositioning Of Volatile-Matter Of Tanjung Enim Coal By Using Thermogravimetry Analyzer (Tga), Nukman Nukman

Makara Journal of Technology

The Decompositioning of Volatile-Matter of Tanjung Enim Coal by using Thermogravimetry Analyzer (TGA). Coal is a nature material which a kind of energy source. The decompotition of coal could analyze by heat treated using thermogravimetry analyzer. The decomposition of the volatile matter for three kinds of Tanjung Enim coal could be known. The value of activation energy that be found diference, then for Semi Anthracite, Bitumonius and Sub Bituminous Coal, the initial temperatures are 60.8 oC, 70.7 oC, 97.8oC, and the last temperatures are 893.8 oC, 832 oC, 584.6oC.

Go to article

Phase Unwrapping Insar Image Using Local Energy Minimization Approach, Kusworo Adi, Tati L.R. Mengko, Andriyan B. Suksmono, Hendra Gunawan Nov 2008

Phase Unwrapping Insar Image Using Local Energy Minimization Approach, Kusworo Adi, Tati L.R. Mengko, Andriyan B. Suksmono, Hendra Gunawan

Makara Journal of Technology

Phase Unwrapping InSAR Image Using Local Energy Minimization Approach. Reconstruction process of phase data from its cover is called Phase Unwrapping (PU). Ideally, without any noise phrase, singularity, and aliasing problems, the phase information can be unwrapped easily. However, in fact, the phase data actually always get noise disturbance and discontinuity. The PU process becomes more complicated and needs a better PU algorithm to address the problems properly. In this research, the local PU algorithm is developed using minimization of close related firstorder pixels energy approach. In this method, the energy difference between four close related pixels is counted, followed …

Go to article

Two Element Microstrip Antenna Array With Defected Ground Structure, Fitri Yuli Zulkifli, Eko Tjipto Rahardjo, Muhamad Asvial, Djoko Hartanto Nov 2008

Two Element Microstrip Antenna Array With Defected Ground Structure, Fitri Yuli Zulkifli, Eko Tjipto Rahardjo, Muhamad Asvial, Djoko Hartanto

Makara Journal of Technology

Two Element Microstrip Antenna Array with Defected Ground Structure. This paper presents a two element microstrip antenna array using trapezium shape defected ground structure (DGS). The DGS is inserted in the ground plane between two elements of antenna array. Insertion of the DGS is intended to suppress the mutual coupling effect produced by antenna array. Simulation and measurement results were taken and compared between antenna array with and without DGS. Measurement results show that the antenna with DGS compared to antenna without DGS can suppress mutual coupling effect to 7.9 dB, improve the return loss to 33.29% from -30.188 dB …

Go to article

Neutron Irradiation On Ss316 Material For Radioactive Endovascular Stent Production, Rohadi Awaludin, Abidin Abidin, Sriyono Sriyono Nov 2008

Neutron Irradiation On Ss316 Material For Radioactive Endovascular Stent Production, Rohadi Awaludin, Abidin Abidin, Sriyono Sriyono

Makara Journal of Technology

Neutron Irradiation on SS316 Material for Radioactive Endovascular Stent Production. It was reported that restenosis could be prevented by radioactive endovascular stent. SS316 material of endovascular stent has been irradiated at pneumatic rabbit system of G.A. Siwabessy reactor for 5 minutes for producing radioactive stent by neutron activation. After 10 days of decay, the irradiated SS316 was measured by gamma spectrometer. The radioisotopes of 51Cr, 59Fe and 60Co were detected in the irradiated SS316 with radioactivity of 5990, 107 and 109 Bq/mg respectively. The Calculation results showed that radioisotopes of 51Cr, 59Fe and 55Fe were produced by neutron activation. The …

Go to article

Physical Characteristics And Utilization Oft The Karst Beaches In Kabupaten Gunungkidul, Astrid Damayanti, Ranum Ayuningtyas Nov 2008

Physical Characteristics And Utilization Oft The Karst Beaches In Kabupaten Gunungkidul, Astrid Damayanti, Ranum Ayuningtyas

Makara Journal of Technology

Physical Characteristics and Utilization oft the Karst Beaches in Kabupaten Gunungkidul. Karsts beaches at Gunungkidul Regency (Baron, Kukup, Sepanjang, Drini, Krakal, Ngandong, and Sundak), located in south of Daerah Istimewa Yogyakarta Province, have economic potential. Even they have similarity in geological condition (genesis and morphological processes), but they have different physical characteristics. Based on result of observation environment on morphological conditions and spatial analysis method, we found the proper utilization of the beaches.

Go to article

Hydrogen Absorption In Weldments Of Overlaid Claded Pressure Vessel, Ronnie Higuchi Rusli Nov 2008

Hydrogen Absorption In Weldments Of Overlaid Claded Pressure Vessel, Ronnie Higuchi Rusli

Makara Journal of Technology

Cracks was found in type 347 stainless steel internal attachment welds of a reactor for a high temperature, and high pressure hydrogen service. One of the possible causes of cracking is low cycle fatigue cracking induced by repetition of thermal stress to embrittled weld metal. Type 347 weld metal loses its ductility by presence of sigma phase and hydrogen.

Go to article

Spectral Response Surfaces And The Ringing Response Of Offshore Structures, I Ketut Suastika Nov 2008

Spectral Response Surfaces And The Ringing Response Of Offshore Structures, I Ketut Suastika

Makara Journal of Technology

A method, called spectral response surface method, is proposed for the study of the ringing phenomenon of offshore structures. Newman’s results for diffraction force on a column were reformulated in terms of the frequency components of the ocean surface and their Hilbert transforms. Using a first-order reliability method together with a dynamic model for the structural response, it is straightforward to calculate the ocean surface history most likely to generate an extreme ringing response and the ringing response history.

Go to article

Bs News Nov 2008

Bs News

Building Services Engineering

No abstract provided.

Go to article

Ole Miss Engineer 2008 Oct 2008

Ole Miss Engineer 2008

Ole Miss Engineer

No abstract provided.

Go to article

First Prev Next Last