Engineering Commons^™

Usage Of Spline Interpolation In Catheter-Based Cardiac Mapping, Bülent Yilmaz, Uğur Cunedi̇oğlu, Engi̇n Baysoy

Turkish Journal of Electrical Engineering and Computer Sciences

Due to their minimal invasiveness catheters are highly preferred in cardiac mapping techniques used in the source localization of rhythm disturbances in the heart. In cardiac mapping, standard steerable catheters and multielectrode basket catheters are the two alternatives for the characterization of the underlying tissue on the inner (endocardium) and outer (epicardium) surfaces of the heart. As with any discrete sampling technique, an important question for catheter-based cardiac mapping is how to determine values at locations from which direct measurements are not available. Interpolation is the most common approach for providing values at unmeasured sites using the available measurements. In …

Delta-Sigma Subarray Beamforming For Ultrasound Imaging, Hasan Şaki̇r Bi̇lge

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, an ultrasonic digital beamformer based on subarray processing of 1-bit delta-sigma (\Delta \Sigma ) oversampled echo signals is presented. The single-bit oversampling \Delta \Sigma conversion simplifies the coherent processing in beamforming with improved timing accuracy. Subarray processing also aims to simplify the beamforming complexity, where the partial-beam sums (low-resolution beams) are acquired from small subarrays, and then these partial beams are coherently processed for producing high-resolution beams. In the \Delta \Sigma subarray beamforming, the \Delta \Sigma coded echo signals are summed over the subarray channels, and then these partial beam-sums are first \Delta \Sigma demodulated, then processed …

Design Of Optimal Sampling Times For Pharmacokinetic Trials Via Spline Approximation, Musa Hakan Asyali

Turkish Journal of Electrical Engineering and Computer Sciences

Understanding and comparison of different drug delivery formulations are based on pharmacokinetic parameters (PKP) such as area under curve, maximum concentration, and time to reach maximum concentration. Accurate estimation of PKP is of critical importance in capturing drug absorption and elimination characteristics and in reaching bioequivalence decisions. Since PKP are estimated from a limited number of samples, the timing of the samples directly influences the accuracy of estimation. Optimization of the sampling times may not only increase the accuracy of PKP estimation, but also reduce the number of samples to be drawn, which in turn lessens the inconvenience to the …

Optimal Feature Selection For 3d Facial Expression Recognition Using Coarse-To-Fine Classification, Hamit Soyel, Hasan Demirel

Turkish Journal of Electrical Engineering and Computer Sciences

Automatic facial expression recognition for novel individuals from 3D face data is a challenging task in pattern analysis. This paper describes a feature selection process for pose-invariant 3D facial expression recognition. The process provides a lower dimensional subspace representation, which is optimized to improve the classification accuracy, retrieved from geometrical localization of facial feature points to classify facial expressions. Fisher criterion-based approach is adopted to provide a basis for the optimal selection of features. Two-stage probabilistic neural network architecture is employed as a classifier to recognize the facial expressions. In the first stage, which can be regarded as the coarse …

Fast Computation Of Determination Of The Prime Implicants By A Novel Near Minimum Minimization Method, Fati̇h Başçi̇ftçi̇, Şi̇rzat Kahramanli

Turkish Journal of Electrical Engineering and Computer Sciences

In this study proposed is an off-set-based direct-cover near-minimum minimization method for single-output Boolean functions represented in a sum-of-products form. To obtain the complete set of prime implicants including given on-cube (on-minterm), the proposed method uses off-cubes (off-minterms) expanded by this On-cube. The amount of temporary results produced by this method does not exceed the size of the off-set. To make fast computation, we used logic operations instead of standard operations. Expansion off-cubes, commutative absorption operations and intersection operations are realized by logic operations for fast computation. The proposed minimization method is tested on several different kinds of problems and …

A Second Order Approximation To Reduce The Complexity Of Ldpc Decoders Based On Gallager's Approach, Aykut Kalaycioğlu, Oktay Üreten, H. Gökhan İlk

Turkish Journal of Electrical Engineering and Computer Sciences

A piece-wise second order approximation to the f (x) = -log [tanh (x/2)] function is proposed to reduce the computational complexity of LDPC decoder's utilizing Log-Likelihood Ratio Belief Propagation (LLR-BP) algorithm based on Gallager's approach. Simulation results show that the proposed low complexity approximation doesn't cause BER performance degradation.

Performance Analysis Of Swarm Optimization Approaches For The Generalized Assignment Problem In Multi-Target Tracking Applications, Ali̇ Önder Bozdoğan, Asim Egemen Yilmaz, Murat Efe

Turkish Journal of Electrical Engineering and Computer Sciences

The aim of this study is to investigate the suitability of selected swarm optimization algorithms to the generalized assignment problem as encountered in multi-target tracking applications. For this purpose, we have tested variants of particle swarm optimization and ant colony optimization algorithms to solve the 2D generalized assignment problem with simulated dense and sparse measurement/track matrices and compared their performance to that of the auction algorithm. We observed that, although with some modification swarm optimization algorithms provide improvement in terms of speed, they still fall behind the auction algorithm in finding the optimum solution to the problem. Among the investigated …

Stpso: Strengthened Particle Swarm Optimization, Ai̇şe Zülal Şevkli̇, Fati̇h Erdoğan Sevi̇lgen

Turkish Journal of Electrical Engineering and Computer Sciences

In this paper, we present a novel approach to strengthen Particle Swarm Optimization (PSO). PSO is a population-based metaheuristic that takes advantage of individual memory and social cooperation in a swarm. It has been applied to a variety of optimization problems because of its simplicity and fast convergence. However, straightforward application of PSO suffers from premature convergence and lack of intensification around the local best locations. To rectify these problems, we modify update procedure for the best particle in the swarm and propose a simple and random moving strategy. We perform a Reduced Variable Neighborhood Search (RVNS) based local search …

Programmable Design And Implementation Of A Chaotic System Utilizing Multiple Nonlinear Functions, Recai̇ Kiliç, Fatma Yildirim Dalkiran

Turkish Journal of Electrical Engineering and Computer Sciences

In addition to exhibiting a rich variety of bifurcation and chaos via tuning parameters, a chaotic system introduced by Sprott can be modeled and realized with a fixed main system block and many different changeable nonlinear function blocks such as piecewise-linear function, cubic function and other trigonometric functions. This system is very suitable for implementing a programmable chaos generator according to its changeable nonlinearity. This paper presents a FPAA (Field Programmable Analog Array)-based programmable implementation of this system. Nonlinear function blocks used in this chaotic system are modeled with FPAA programming and a model is rapidly changed for realizing other …

Trust Account Fraud And Effective Information Security Management, Sameera Mubarak

Journal of Digital Forensics, Security and Law

The integrity of lawyers’ trust accounts has come under scrutiny in the last few years. There are strong possibilities of information technology security breaches happening within the firms, either accidental or deliberate. The damage caused by these security breaches could be extreme. For example, a trust account fund in an Australian law firm was misused in a security breach in which Telstra charged A$50,000 for phone usage, mainly for ISD calls to Hong Kong. Our study involved interviewing principals of ten law companies to find out solicitors’ attitudes to computer security and the possibility of breaches of their trust accounts. …

Forensic Analysis Of The Windows 7 Registry, Khawla A. Alghafli, Andrew Jones, Thomas A. Martin

Journal of Digital Forensics, Security and Law

The recovery of digital evidence of crimes from storage media is an increasingly time consuming process as the capacity of the storage media is in a state of constant growth. It is also a difficult and complex task for the forensic investigator to analyse all of the locations in the storage media. These two factors, when combined, may result in a delay in bringing a case to court. The concept of this paper is to start the initial forensic analysis of the storage media in locations that are most likely to contain digital evidence, the Windows Registry. Consequently, the forensic …

Reeling In Big Phish With A Deep Md5 Net, Brad Wardman, Gary Warner, Heather Mccalley, Sarah Turner, Anthony Skjellum

Journal of Digital Forensics, Security and Law

Phishing continues to grow as phishers discover new exploits and attack vectors for hosting malicious content; the traditional response using takedowns and blacklists does not appear to impede phishers significantly. A handful of law enforcement projects — for example the FBI's Digital PhishNet and the Internet Crime and Complaint Center (ic3.gov) — have demonstrated that they can collect phishing data in substantial volumes, but these collections have not yet resulted in a significant decline in criminal phishing activity. In this paper, a new system is demonstrated for prioritizing investigative resources to help reduce the time and effort expended examining this …

The 2009 Analysis Of Information Remaining On Disks Offered For Sale On The Second Hand Market, Andy Jones, Craig Valli, Glenn S. Dardick, Iain Sutherland, G. Dabibi, Gareth Davies

Journal of Digital Forensics, Security and Law

The ever increasing use and reliance upon computers in both the public and private sector has led to enormous numbers of computers being disposed of at the end of their useful life within an organisation. As the cost of computers has dropped, their use in the home has also continued to increase. In most organisations, computers have a relatively short life and are replaced on a regular basis with the result that, if not properly cleansed of data, they are released into the public domain containing data that can be relatively up to date. This problem is exacerbated by the …

Computer Forensics For Graduate Accountants: A Motivational Curriculum Design Approach, Grover S. Kearns

Journal of Digital Forensics, Security and Law

Computer forensics involves the investigation of digital sources to acquire evidence that can be used in a court of law. It can also be used to identify and respond to threats to hosts and systems. Accountants use computer forensics to investigate computer crime or misuse, theft of trade secrets, theft of or destruction of intellectual property, and fraud. Education of accountants to use forensic tools is a goal of the AICPA (American Institute of Certified Public Accountants). Accounting students, however, may not view information technology as vital to their career paths and need motivation to acquire forensic knowledge and skills. …

Table Of Contents

Journal of Digital Forensics, Security and Law

No abstract provided.

Asme Early Career Technical Journal (Front Matter), Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. -x

Development Of A Biofidelic Material Model For Brain Tissue And Its Application To The Impact Response Of The Human Head, Sandeep Kulathu, David L. Littlefield

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 1-8

Effects Of Environmental Aging On The Thermal And Mechanical Properties Of Vinyl Ester Nanocomposites, Ahmad Almagableh, P Raju Mantena

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 35-40

The Failure Characterization Of Mechanically Fastened Composite Joints, Olanrewanju Aluko, Brian S. Moore

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 19-26

Solving Coupled Systems Of Differential Equations Using The Length Factor Artificial Neural Network Method, Kevin Stanley Mcfall

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 27-34

Molecular Dynamic Simulation To Determine Temperature Dependent Young’S Modulus Of Monolayer And Bilayer Graphene Sheets, Roy Downs, Dakota Schrivener, Sachin S. Terdalkar, Joseph J. Rencis

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 41-48

Asme Early Career Technical Journal (Complete Issue), Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

An Experimental And Numerical Crashworthiness Study Of Composite Tubes, Raghawendra P S Sisodia, Nitin K. Waghmare, Anurag Dixit

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 49-56

In-Silico Simulation Of Electrostatic Charge Effects On Inhaled Aerosol Particle Deposition In The Human Lung, Mohammed Ali

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 75-79

Performance Analysis Of Micro Gas Turbine Fueled By Blends Of Biodiesel And Petroleum-Based Diesel, Farshid Zabihian, Hsiao-Wei D. Chiang, Alan S. Fung

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 66-74

Finite Element Analysis Of Bonded Composite Single-Lap Joint As A Basis For Optimizing Future Nano-Reinforcement Configurations, Gregory J. Hickman, Kuang-Ting Hsiao

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 88-96

Mathematical Models For Prediction Of Weld Bead Geometry In Gmaw Of Aluminium Alloy 7005, Reeta Wattal, Sunil Pandey

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 80-87

Analyzing Nonlinear Flexible Structures Using Perturbation Approach, Zeaid F. Hasan, Ahmad Bani-Younes

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 96-104

Interactive Computational Tool For Simulation Of Dynamic Response And Damage In Composite Structures, Tezeswi P. Tadepalli, Christopher L. Mullen

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 105-111

Flowchart Visual Programming In Mechatronics Course, Vidya K. Nandikolla, Suhas S. Pharkute

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, October 1-2, 2010. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 118-123