Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Journal

Discipline
Institution
Keyword
Publication Year
Publication
File Type

Articles 22501 - 22530 of 27413

Full-Text Articles in Engineering

Preparation Of Organosilane Treated Microcrystalline (Simcc) And Simcc/Polypropylene Composites, P. Thummanukitcharoen, S. Limpanart, K. Srikulkit Jul 2012

Preparation Of Organosilane Treated Microcrystalline (Simcc) And Simcc/Polypropylene Composites, P. Thummanukitcharoen, S. Limpanart, K. Srikulkit

Journal of Metals, Materials and Minerals

In this study, the silane treated microcrystalline cellulose (SiMCC)/polypropylene composite was prepared. In the first step, the surface modification of microcrystalline cellulose (MCC) with various concentrations of hexadecyltrimethoxysilane was carried-out in order to obtain the SiMCC having good compatibility with PP matrix. Characterizations including SEM, FT-IR, TGA and DSC were employed to analyze the structure of SiMCC. SEM revealed that MCC surface morphology was changed from rod shape into rough particles after silane treatment. In the next step, the obtained SiMCC was mixed with PP powder using twin-screw extruder. Based on TGA results, it was found that the addition of …

Go to article

Low-Cycle Fatigue Of Thermally-Cycled Carbon-Epoxy Composite, Ya. B. Unigovski, A. Grinberg, E. M. Gutman, R. Shneck Jul 2012

Low-Cycle Fatigue Of Thermally-Cycled Carbon-Epoxy Composite, Ya. B. Unigovski, A. Grinberg, E. M. Gutman, R. Shneck

Journal of Metals, Materials and Minerals

Investigation of low-cycle fatigue of composites is of vital importance for the design of structural components. In this study, the effects of thermal cycling on low-cycle fatigue behavior of carbon-epoxy laminate are investigated in a purely bending mode at strain ratios of -1 and 0.1. It is found that a very small increase in the plastic strain amplitude catastrophically shortens the fatigue life N of the composite determined as a number of cycles corresponding to 0.9 of the initial force. The preliminary thermal cycling of the composite at the temperature varied from 180°C to −195.8°C shortens N values in comparison …

Go to article

Three-Body-Type Abrasive Wear Behavior Of 26% Cr Cast Iron With Molybdenum, A. Chooprajong, P. Sricharoenchai, S. Inthidech, Y. Matsubara Jul 2012

Three-Body-Type Abrasive Wear Behavior Of 26% Cr Cast Iron With Molybdenum, A. Chooprajong, P. Sricharoenchai, S. Inthidech, Y. Matsubara

Journal of Metals, Materials and Minerals

Hypoeutectic 26 wt% Cr cast irons without and with Mo were prepared in order to investigate their abrasion wear resistance. The annealed specimens were hardened from 1323 K (As-H) and then tempered at three levels of temperatures between 673 and 823 K for 7.2ks, the temperature giving the maximum hardness (HTmax), lower temperature than that at HTmax (L-HTmax ) and higher temperature than that at HTmax (H-HTmax). The abrasive wear resistance was evaluated using Rubber Wheel abrasion test (three-body-type). It was found that hardness and volume fraction of retained austenite (V) in the heat-treated specimens varied with the Mo content …

Go to article

The Oxidation Behaviour Of Stainless Steel Aisi 409 Coated By Decorative Nickel-Chromium Plating, T. Wongpinij, T. U-Dom, T. Suptrakun, T. Puttanasun, C. Pimpan, N. Nangnoi, P. Wongpanya Jul 2012

The Oxidation Behaviour Of Stainless Steel Aisi 409 Coated By Decorative Nickel-Chromium Plating, T. Wongpinij, T. U-Dom, T. Suptrakun, T. Puttanasun, C. Pimpan, N. Nangnoi, P. Wongpanya

Journal of Metals, Materials and Minerals

The continuous and cyclic oxidation behaviour of ferritic stainless steel AISI 409 surfacecoated by decorative nickel-chromium plating was studied. Firstly, the plated AISI 409 steel samples were cut into rectangular pieces of 20x10x3 mm. Nickel plating was electroplated with various times, i.e., 0, 5, 10 and 15 minutes; subsequently the decorative chromium plating was performed for 5 minutes. Then, the samples were exposed to 200ºC and 300ºC. The degradation of samples was evaluated by considering weight alteration after oxidation test. The oxidation product and surface of samples were characterized by optical microscope and scanning electron microscope (SEM) with energy dispersive …

Go to article

Failure Analysis Of Bearings In Air Conditioning Compressor, P. Promdirek, A. Leidig, T. Keawjarus, P. Tong-In Jul 2012

Failure Analysis Of Bearings In Air Conditioning Compressor, P. Promdirek, A. Leidig, T. Keawjarus, P. Tong-In

Journal of Metals, Materials and Minerals

Two journal bearings of a compressor were failed in service. The wear which led to crack was observed at the internal surface of both bearings. The objective of this analysis is to evaluate the reason for the wear found on the internal bearings surface. Two bearings were returned from field and others in several conditions were examined. Electron probe micro analyzer and microhardness was used for metallurgical analysis. It revealed that bearing consisted of two different layers: 1) Fe-base and 2) Al-Sn alloy. Surface worn at the internal surface which composed of Al-Sn alloy was found. The results also showed …

Go to article

Corrosion Behavior Of Aisi 4140 Steel Surface Coated By Physical Vapor Deposition, C. Keawhan, P. Wongpanya, N. Witit-Anun, P. Songsiriritthigul Jul 2012

Corrosion Behavior Of Aisi 4140 Steel Surface Coated By Physical Vapor Deposition, C. Keawhan, P. Wongpanya, N. Witit-Anun, P. Songsiriritthigul

Journal of Metals, Materials and Minerals

The corrosion behavior of uncoated and CrN-coated onto AISI 4140 steel was studied by electrochemical technique. Firstly, the AISI 4140 steel samples were solution heat treated and oil quenched in order to achieve proper hardness. Then, they were surface-prepared with alteration of surface roughness by using SiC paper at different numbers of 180, 600, and 1200 prior to CrN coating. The samples were coated with CrN film by physical vapor deposition (PVD) technique. The corrosion behavior of the uncoated and CrN-coated samples was studied in air-saturated 3.5 wt% NaCl solution at the pH values of 2, 7 and 10 at …

Go to article

A Micromechanical Flow Curve Model For Dual Phase Steels, S. Sodjit, V. Uthaisangsuk Jul 2012

A Micromechanical Flow Curve Model For Dual Phase Steels, S. Sodjit, V. Uthaisangsuk

Journal of Metals, Materials and Minerals

In the automotive industries, Dual Phase (DP) steels have become a favoured material for the car body parts due to their excellent combination of high strength and good formability. A microstructure of DP steel generally consists of a matrix of ferrite reinforced by small islands of martensite. Experimental investigations showed that effects of martensite phase fraction, morphology, and phase distribution play an important role for the mechanical and fracture behaviours of the dual phase steel. In the present work, an approach concerning FE based modelling for predicting flow curve of DP steels has been introduced using a Representative Volume Element …

Go to article

Bs News July/August Jul 2012

Bs News July/August

Building Services Engineering

No abstract provided.

Go to article

Porous Niti Produced By Nitita Transient-Liquid-Assisted Method, O. Worasub, A. Bansiddhi Jul 2012

Porous Niti Produced By Nitita Transient-Liquid-Assisted Method, O. Worasub, A. Bansiddhi

Journal of Metals, Materials and Minerals

This work presents a novel method for preparing porous NiTi by powder metallurgy using a vacuum sintering technique. Tantalum was used as a transient liquid phase creator, which enhanced the sinterability of NiTi powders. The effect of Ta content and powder packing on the degree of densification were investigated. The porous NiTi exhibited shape memory behavior and a large recovery strain, analyzed by differential scanning calorimetry and compressive testing, respectively, making the material promising for bone implant applications. In addition, macroporosity was created by using NaCl spaceholders. Adding 3 atomic percent of Ta and 60 volume percent NaCl space-holder resulted …

Go to article

Nr/Xsbr Nanocomposites With Carbon Black And Carbon Nanotube Prepared By Latex Compounding, A. Boonmahitthisud, S. Chuayjuljit Jul 2012

Nr/Xsbr Nanocomposites With Carbon Black And Carbon Nanotube Prepared By Latex Compounding, A. Boonmahitthisud, S. Chuayjuljit

Journal of Metals, Materials and Minerals

Two series of natural rubber/carboxylated styrene butadiene rubber (NR/XSBR) (80/20) nanocomposites containing different loadings of carbon black (CB) (3-9 phr) and carbon nanotube (CNT) (0.1-0.4 phr) have been prepared by a latex stage compounding method. Before mixing with NR/XSBR blended latex, CB and CNT were dispersed and stabilized in water by ball milling with the aid of surfactant. The obtained compounded latex was cast into sheet on a glass mold and thereafter cured in an oven at 80°C for 3 h. The tensile properties (tensile strength, modulus at 300% strain, elongation at break), dynamic mechanical properties (loss tangent, storage modulus) …

Go to article

Identifying And Attributing Similar Traces With Greatest Common Factor Analysis, Fred Cohen Jun 2012

Identifying And Attributing Similar Traces With Greatest Common Factor Analysis, Fred Cohen

Journal of Digital Forensics, Security and Law

This paper presents an algorithm for comparing large numbers of traces to each other and identifying and presenting groups of traces with similar features. It is applied to forensic analysis in which groups of similar traces are automatically identified and presented so that attribution and other related claims may be asserted, and independently confirmed or refuted. The approach of this paper is to identify an approximate algorithm that will find a large subset of greatest common factor similar groups of arbitrary factors in far less time and space than an exact algorithm using examiner-provided selection criteria for factor definition.

Go to article

Preparation And Electrochemical Performance Of Tio2/Gns Nanocomposite As Anode Materials For Lithium-Ion Batteries, Lin-Lin Qin, Huan Zhang, Xiao-Jing Liu, Jian-Hui Xu, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong Jun 2012

Preparation And Electrochemical Performance Of Tio2/Gns Nanocomposite As Anode Materials For Lithium-Ion Batteries, Lin-Lin Qin, Huan Zhang, Xiao-Jing Liu, Jian-Hui Xu, Yi-Ning Shi, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The honeycomb-like porous TiO2/graphenes (TiO2/GNs) nanocomposite was prepared by a reflux method. SEM and TEM results showed that nanosized anatase TiO2 (about 5~10 nm) were dispersed uniformly on the surface of the GNs. The TiO2/GNs composite showed excellent rate and cycling performance: A stable charge capacity of 169.5 mAh·g-1 was obtained at 30C, and can restore to 241.7 mAh·g-1 while current went back to 1C. The stable charge capacity of TiO2/GNs nanocomposite electrode up to 201.9 mAh·g-1 was achieved at 10C in the first cycle, and could be …

Go to article

Novel Molten-Salt Electrolysis Processes Towards Low-Carbon Metallurgy, Wei Xiao, Hua Zhu, Hua-Yi Yin, De-Hua Wang Jun 2012

Novel Molten-Salt Electrolysis Processes Towards Low-Carbon Metallurgy, Wei Xiao, Hua Zhu, Hua-Yi Yin, De-Hua Wang

Journal of Electrochemistry

This review focuses on recent developments in molten-salt electrolytic metallurgical processes with respect to 1) high-efficiency metallurgical technologies via electrolytic reduction of solid oxides in molten chlorides and 2) zero-carbon-footprint electrochemical splitting metallurgical technologies. Initiating with an introduction on dynamic solid/solid/liquid three-phrase interlines electrochemistry for electrochemical reduction of solid cathode, the former aspect is discussed in terms of facilitating mass transfer throughout solid cathode, one-step production of functional alloy powders with the assistance of under-potential electroreduction of active metals and near-net-shape production of metal/alloy components. Whilst the latter is summarized by introducing some zero-carbon molten-salt electrolytic technologies including electro-splitting of …

Go to article

Comments On Internal Alternating Current Resistance Test Standard And Methods Of Lithium-Ion Batteries, Ya-Li Zhang, Sen Xin, Yu-Guo Guo, Li-Jun Wan Jun 2012

Comments On Internal Alternating Current Resistance Test Standard And Methods Of Lithium-Ion Batteries, Ya-Li Zhang, Sen Xin, Yu-Guo Guo, Li-Jun Wan

Journal of Electrochemistry

The sustainable development of energy and environment is one of the most influential issues of this century. Batteries, especially secondary batteries are important for powering out daily life. However, in many practical applications, such as in electric vehicles and hybrid electric vehicles, batteries should be used in packs and the performance consistency of each battery in the pack should be taken into consideration. As one of the performance parameters being used to characterize the battery consistency, internal resistance is of great importance to the industrial fabrication and the use of batteries. Currently, internal resistance tests of secondary batteries, such as …

Go to article

Methodological Significance Of "Property-Activity Relationship" For Catalyst Studies, Jun-Tao Lu, Li Xiao, De-Li Wang, Yu-Bao Sun, Yan-Ge Suo, Lin Zhuang Jun 2012

Methodological Significance Of "Property-Activity Relationship" For Catalyst Studies, Jun-Tao Lu, Li Xiao, De-Li Wang, Yu-Bao Sun, Yan-Ge Suo, Lin Zhuang

Journal of Electrochemistry

Instead of attempting the structure-activity relationship (SAR), which is commonly regarded as the core problem for catalyst studies, this paper highlights the methodological significance of “property-activity relationship (PAR)”. The “property” here refers to an index （such as the adsorption energy of an intermediate） or a group of indexes reflecting the behavior of a catalyst which interacts with reactants or intermediates, and is a bridge between structure and activity. Because property is related to activity more directly than structure to activity, PAR should be simpler, less difficult and, therefore, more feasible to be accessed than SAR. Once the key property is …

Go to article

Simple Analysis And Possible Solutions Of The Unusual Interfacial Reactions In Li-S Batteries, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang Jun 2012

Simple Analysis And Possible Solutions Of The Unusual Interfacial Reactions In Li-S Batteries, Xin-Ping Ai, Yu-Liang Cao, Han-Xi Yang

Journal of Electrochemistry

Rechargeable Li-S batteries are a promising power source with realizable energy densities several times higher than current Li-ion batteries. However, the capacity utilization and cycling stability of the existing Li-S technologies are still insufficient for battery applications. The causes for the electrochemical instability of this redox system arise probably from the changes in the surface structures and electrochemical microenvironments of the Li anode and sulfur cathode during charge-discharge reactions, which includes the frustrated electron transfer in the sulfur-carbon interface, the dissoluble diffusion of the polysulfide intermediates, and the shuttle reaction inbetween the sulfur and Li electrodes. To deal with these …

Go to article

Preparation And Characterization Of Prussian Blue Modified Nanoelectrode, Wei Wang, Bao-Fa Su, Dong-Ping Zhan Jun 2012

Preparation And Characterization Of Prussian Blue Modified Nanoelectrode, Wei Wang, Bao-Fa Su, Dong-Ping Zhan

Journal of Electrochemistry

The Pt nanoelectrodes were fabricated by using a laser-based pipet puller and the recessed nanoelectrodes were prepared by etching of disk Pt nanoelectrodes wtih high frequency ac voltage. Prussian blue microcrystal was synthesized electrochemically on the both disk and recessed Pt nanoelectrodes. The strength of mechanical adhesion for the Prussian blue microcrystal on the nanoelectrode was enhanced. A novel method for the controllable synthesis of single particle is proposed, which has potential applications in modified electrodes and single particle electrocatalysis.

Go to article

On The Molecular Mechanism Of Electron Transfer Of Cytochrome C Modulated By Gold Nanoparticles In Nano-Sandwich Architecture, Shou-Rui Lin, Li-Xu Wang, Xiu-E Jiang, Li-Ping Guo Jun 2012

On The Molecular Mechanism Of Electron Transfer Of Cytochrome C Modulated By Gold Nanoparticles In Nano-Sandwich Architecture, Shou-Rui Lin, Li-Xu Wang, Xiu-E Jiang, Li-Ping Guo

Journal of Electrochemistry

The effects of adsorbed gold nanoparticles on the surface-enhanced infrared absorption (SEIRA) difference spectra of redox-induced cytochrome (Cyt) c in AuNPs/Cyt c/Au sandwich architecture were monitored by SEIRA spectroscopy. The results indicated that the intensity of SEIRA difference spectrum for the vibration of the heme was significantly increased due to the adsorption of gold nanoparticles on the Cyt c. This was induced by the electron transfer between the heme and the gold nanoparticles, which also promoted electron transfer of adsorbed protein. This study suggested a new technique for optimizing the electrochemical property of adsorbed protein.

Go to article

The Electrocatalytic Performance Of Pd Catalysts Supported On Pvp Modified Mwcnts For Formic Acid Oxidation, Jing Zhang, Xiao Zhao, Chang-Peng Liu, Wei Xing Jun 2012

The Electrocatalytic Performance Of Pd Catalysts Supported On Pvp Modified Mwcnts For Formic Acid Oxidation, Jing Zhang, Xiao Zhao, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

In this paper the MWCNTs were modified by Poly (N-vinyl-2-pyrrolidone) (PVP) to support Pd nanoparticles, which were used as the catalyst for formic acid electrooxidation. And the performance of Pd/PVP-MWCNTs catalysts was studied by electrochemical measurements. The observations from Fourier transforms infrared spectrometer (FTIR) and transmission electron microscopy (TEM) illustrated that the Pd nanoparticles with a small size and narrow size distribution were highly dispersed on PVP-MWCNT support. Therefore, the Pd/PVP-MWCNTs catalysts showed excellent catalytic activity for formic acid electrooxidation.

Go to article

Synthesis Of Spherical Ni3S4 By Solvothermal Method As Supercapacitor Electrodes, Qing-Na Huan, Li-Fang Jiao, Qing-Hong Wang, Hong-Mei Du, Jia-Qin Yang, Wen-Xiu Peng, Yi-Jing Wang, Hua-Tang Yuan Jun 2012

Synthesis Of Spherical Ni3S4 By Solvothermal Method As Supercapacitor Electrodes, Qing-Na Huan, Li-Fang Jiao, Qing-Hong Wang, Hong-Mei Du, Jia-Qin Yang, Wen-Xiu Peng, Yi-Jing Wang, Hua-Tang Yuan

Journal of Electrochemistry

The Ni3S4 microspheres have been synthesized via a facile solvothermal method. The crystal structure and surface morphology are characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Microspherical Ni3S4 exhibits good electrochemical capacitance validated by electrochemical measurements. The specific capacities of 1120.6 F∙g-1 at 0.5 A∙g-1 and 433.4 F∙g-1 at 4 A∙g-1 with the capacitance retention of 89.37 % and 84.88 % were obtained after 1000 cycles, respectively. The electrochemical reaction is expected due to the transformation of Ni(OH)2 and NiOOH based on the XRD, XPS and CV …

Go to article

Detection Of Pml/Rarî± Fusion Gene Using Gold Nanopaticles Modified Electrode By Chronocoulometry, Li-Man Wang, Li-Qing Lin, Shao-Huang Weng, Xin-Hua Lin, Yuan-Zhong Chen Jun 2012

Detection Of Pml/Rarî± Fusion Gene Using Gold Nanopaticles Modified Electrode By Chronocoulometry, Li-Man Wang, Li-Qing Lin, Shao-Huang Weng, Xin-Hua Lin, Yuan-Zhong Chen

Journal of Electrochemistry

A gold nanoparticles modified electrode was prepared by electrodeposition at constant potential. The sulfydryl modified probe was immobilized onto surface of gold nanoparticles via Au-S covalent bond and hybridized with complementary target DNA sequences, then the DNA sensor was fabricated for the detection of PML/RARα fusion gene by chronocoulometry in acute promyelocytic leukemia (APL). Scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS) were used to characterize the surface morphology of gold nanoparticles and the constructing process of sensor. With hexaammineruthenium(Ⅲ) chloride (RuHex) as a novel electrochemical indicator, the chronocoulometric DNA biosensor was employed to monitor artificial APL PML/RARα fusion …

Go to article

Protonization Of Amino Functional Groups Confined In Nanochannels, Hong-Li Gao, Kai-Lin Zhou, Chen Wang, Su-Juan Li, Hui Zhang, Xing-Hua Xia Jun 2012

Protonization Of Amino Functional Groups Confined In Nanochannels, Hong-Li Gao, Kai-Lin Zhou, Chen Wang, Su-Juan Li, Hui Zhang, Xing-Hua Xia

Journal of Electrochemistry

Protonization process is the key step of acid-base reaction and occurs in many biological processes. Study of the protonization process of molecules and/or functional groups in confined conditions would assist understanding in the acid-base theory and confinement effect of biomolecules. In this paper, we developed a novel approach to study protonization of functional groups in porous anodic alumina array nanochannels by measuring the flux of electrochemical active probes using an Au film electrochemical detector sputtered at the end of the nanochannels. The protonization status of the surface functional groups in nanochannels can change the surface charges and further modulate the …

Go to article

Application Of First Principles Calculations In Anode Materials For Lithium Ion Batteries, Tian-Ran Zhang, Dai-Xin Li, Si-Qi Yang, Zhan-Liang Tao, Jun Chen Jun 2012

Application Of First Principles Calculations In Anode Materials For Lithium Ion Batteries, Tian-Ran Zhang, Dai-Xin Li, Si-Qi Yang, Zhan-Liang Tao, Jun Chen

Journal of Electrochemistry

First principles calculations play an important role in the study and development of new materials for lithium batteries. In this paper, we review the application of first principles calculations in the design of anode materials, including the modeling of the interaction of lithium in the anode materials, capacity, voltage, electrochemical reaction process, diffusion, rate capability, the relationship between the structure and properties, and the experimental phenomena interpreting. Based on the discussions, we emphasize on the importance of first principles calculations and demonstrate their requirement for further development.

Go to article

An Overview Of Electrode Materials In Microbial Fuel Cells, Su-Qin Ci, Na Wu, Zhen-Hai Wen, Jing-Hong Li Jun 2012

An Overview Of Electrode Materials In Microbial Fuel Cells, Su-Qin Ci, Na Wu, Zhen-Hai Wen, Jing-Hong Li

Journal of Electrochemistry

Microbial fuel cells (MFCs) are devices that can directly convert organic chemical energy into electrical energy with microbial as catalysts. MFCs are a promising bio-electrochemical system with the potential to degrade organic sewage and produce electricity. This article supplies a critical and comprehensive review for the electrode materials concerning about anode and cathode in MFCs, including the fabrications, functional modifications and surface constructions of electrode materials, as well as their applications in MFCs. Additionally, the existing problems of electrode materials in current MFCs have been demonstrated in order to provide the guideline for exploring the next-generation electrode materials for MFCs.

Go to article

Preparation And Electrochemical Performance Of Tin@Mno Fibers By Coaxial Electrospinning, Chao-Qun Shang, Hai-Yan Yang, Xin-Hong Zhou, Zhong-Lei Man, Peng-Xian Han, Jian-Hua Yao, Yu-Long Duan, Guang-Lei Cui Jun 2012

Preparation And Electrochemical Performance Of Tin@Mno Fibers By Coaxial Electrospinning, Chao-Qun Shang, Hai-Yan Yang, Xin-Hong Zhou, Zhong-Lei Man, Peng-Xian Han, Jian-Hua Yao, Yu-Long Duan, Guang-Lei Cui

Journal of Electrochemistry

In this study, the titanium nitride (TiN) @manganese oxide (MnO) core-shell structured fibers were prepared by the coaxial electrospinning using tetrabutyl titanate and manganese acetylacetonate as raw materials, and polyvinylpyrrolidone (PVP) as the template. And then the fibers were annealed in ammonia to finally obtain the coaxial TiN@MnO fibers. XRD, FESEM, TEM, EDX and physical adsorption instrument were used to characterize the phase structure, morphology, composition and specific surface areas and pore sizes of the samples. It was demonstrated that the as-synthesized TiN@MnO fibers possessed coaxial structure with a surface area of 16 m2·g-1. As indicated …

Go to article

Performnces Of Lini0.5Mn0.5O2 Thin Film Electrodes Prepared By Pulsed Laser Deposition, Yun-Hai Wan, Guo-Liang Yuan, Hui Xia Jun 2012

Performnces Of Lini0.5Mn0.5O2 Thin Film Electrodes Prepared By Pulsed Laser Deposition, Yun-Hai Wan, Guo-Liang Yuan, Hui Xia

Journal of Electrochemistry

The all-solid-state thin-film Li-ion batteries with high energy density, power density and temperature stability are the ideal power sources for microelectronic devices. Developing new thin-film cathodes with large specific capacity is the key to their practical applications. The LiNi0.5Mn0.5O2 with a layered structure has a higher reversible capacity and better structural stability compared with traditional LiCoO2 cathode material. In this work, the LiNi0.5Mn0.5O2 thin film cathodes were prepared by pulsed laser deposition. The effects of substrate material and temperature on the microstructure, surface morphology and composition of the thin …

Go to article

Geometric Variables Shock-Tunnel Configurations And Their Effects On Pressure-Time Waveforms, Chase W. Guengerich, Mark A. Faulhaber Jun 2012

Geometric Variables Shock-Tunnel Configurations And Their Effects On Pressure-Time Waveforms, Chase W. Guengerich, Mark A. Faulhaber

Kaleidoscope

No abstract provided.

Go to article

Mechanical Properties Of Recycled Aggregate Concrete With Deformed Steel Re-Bar, Yongjae Kim, Jongsung Sim, Cheolwoo Park Jun 2012

Mechanical Properties Of Recycled Aggregate Concrete With Deformed Steel Re-Bar, Yongjae Kim, Jongsung Sim, Cheolwoo Park

Journal of Marine Science and Technology–Taiwan

This study investigates fundamental properties of the recycled aggregate which was produced through recent hi-technique of recycling. In addition, the mechanical properties of the concrete that was made by the recycled aggregate were compared to the concrete made of natural aggregate. The primary objective of this study was to characterize the concrete-rebar bonding properties of the recycled aggregate concrete. The recycled aggregate concrete showed about 18% decreased bond strength as compared to the natural aggregate concrete. The current prediction equation of bond strength suggested by the design specification does not consider this decreased bond strength by the use of the …

Go to article

Effect Of Water Soluble Polymer And Fiber On The Early-Age Shrinkage Cracking Of Cementitious Composites, Shih-Tang Lin, Ran Huang, Tsai-Lung Weng Jun 2012

Effect Of Water Soluble Polymer And Fiber On The Early-Age Shrinkage Cracking Of Cementitious Composites, Shih-Tang Lin, Ran Huang, Tsai-Lung Weng

Journal of Marine Science and Technology–Taiwan

Both polymeric fiber and water soluble polymer (WSP) have been reported effective in reducing early-age shrinkage cracking. The synergistic effect of cellulose based WSP and fiber on reducing early-age shrinkage cracking of cementitious composite exposed to a constant evaporation rate of 1 kg/(h.m2) environment was investigated in this paper. A fixed ratio of WSP was employed in the poly-acrylic fiber reinforced cementitious composites with various fiber content and aspect ratios. Results indicate that the addition of polymeric fibers reduced plastic shrinkage cracking, such as the total crack area, the average crack width and cracks wider than 1.5 mm. Further reductions …

Go to article

Effective Asr Inhibiting Length And Applied Electrical Field Under Accelerated Lithium Migration Technique, Wei-Chien Wang, Chih-Chien Liu, Chau Lee Jun 2012

Effective Asr Inhibiting Length And Applied Electrical Field Under Accelerated Lithium Migration Technique, Wei-Chien Wang, Chih-Chien Liu, Chau Lee

Journal of Marine Science and Technology–Taiwan

This study investigates the effective concrete length and electric field strength during Accelerated Lithium Migration Technique (ALMT) application for the inhibition of the alkali-silica reaction (ASR). Concrete specimens measuring 10 cm in diameter and 5, 7, 9, 11, 14, 17, 20 and 23 cm in length are fabricated. Specimens with 5, 7, and 9 cm in length are applied 9 A/m2 constant current density, and the rest specimens are applied 60 V constant voltage. After the ALMT process, the specimen is cut every 0.5 cm and analyzed its cation content. Experimental results shows that if the aim of ASR inhibition …

Go to article

First Prev Next Last