Engineering Commons^™

Impact Of Ethanol On The Evolution Of One-Step Synthesized Gold Nanoplates And Nanostars And Their Effects On Raman Signal Enhancement, Ananda Fania, Nonni Soraya Sambudi, Kirana Yuniati Putri, Yuliati Herbani, Affi Nur Hidayah

Makara Journal of Science

Gold nanoplates and nanostars were synthesized from a gold metal salt solution (HAuCl₄) using a one-step synthesis method of ultraviolet C (UVC) light irradiation. The gold salt solution was mixed with ethanol in 6 mL with the following ratios: (1.5:4.5, 3:3, and 4.5:1.5), and subsequently irradiated with UVC light. Changes in localized surface plasmon resonance (LSPR) shifts were observed in real time at 30-min intervals for 2 h. The synthesis process produces gold nanoplates. While gold nanostars were synthesized from a solution of gold salt combined with ethanol, ascorbic acid, and AgNO₃, maintaining a consistent ratio …

Use Of Alaçatı Stone Aggregate In Conventional And Self-Consolidating Concretes, Tahir Kemal Erdem

Journal of Sustainable Construction Materials and Technologies

Alaçatı stone or Alapietra stone is widely used mostly for building cladding. However, its production and use in the construction sites generate high amounts of waste (debris), causing environmental pollution in Çeşme which is a touristic district. This study investigated the reuse of Alaçatı stone as lightweight aggregate (LWA) in both conventional and self-consolidating concrete (SCC) mixtures. The concretes were prepared to have three different water-to-cement ratios (w/c), which were 0.38, 0.42 and 0.48. For each w/c, a conventional concrete mixture and two SCC mixtures with 60 or 70 cm slump flow were produced by varying the superplasticizer SP content. …

A Decision Support Model For Building Material And Component Reuse In The Context Of Circular Buildings, Havva Aksel

Journal of Sustainable Construction Materials and Technologies

Construction activities cause significant environmental impacts such as waste generation, pollution, resource consumption, and land use, which are expected to increase with global construction demands. To mitigate these environmental problems, the circular building occurs as an emerging concept depending on in the circular economy, which aims to minimize waste and redefine the “end-of-life” concept by reducing, reusing, recycling, and recovering materials. The reuse of building materials and components (BMCs) from existing structures represents a crucial strategy for achieving circularity in the built environment. Within this framework, design plays a key role. However, designing with reclaimed BMCs remains complex due to …

Advancements In Perfect Matchings Within Neutrosophic Fuzzy Graphs: Theory And Applications, Muhammad Saeed, Fatima Razaq

Neutrosophic Systems with Applications

Graph theory has been widely used in exemplifying relational structure, and a greater generalization to fuzzy and neutrosophic space enables the exemplification of uncertainty, indeterminacy, and inconsistency in complex systems. Some of these extensions include the neutrosophic fuzzy graphs that provide a more detailed description of the loose relations between the vertices and the edges. However, unlike in classical graph theory, where the concepts of matching and perfect matching are well developed, very little has been studied on how the two concepts can be extended to neutrosophic fuzzy graphs. To seal this gap, the current paper develops and defines the …

Integrating Mcdm Techniques For Optimized Task Offloading In Multi-Uav- Enaled Mobile Edge Computing System, Amira Salam

Neutrosophic Systems with Applications

Carefully choosing a task offloading strategy is crucial for optimizing task scheduling and offloading strategies in a multi-UAV system. Regarding cost, responsiveness, scalability, and data security, each strategy has pros and cons. As a result, selecting the best offloading technique is essential to multi-UAV mobile edge computing task scheduling optimization. A methodical and well-informed decision-making process accomplishes this.

The current study introduces a new hybrid methodology for the multi-criteria decision-making (MCDM) model, known as IVNs-DEMATEL-ANP-VIKOR. The purpose of this model is to find and choose an efficient task offloading strategy. With this method, we use IVNs-DEMATEL to show how different …

Mixed Linear Equation–Inequality Systems Over The Pura Vida Neutrosophic Algebra, Muhammad Rayyanu Abdullahi, Abdulhadi Aminu

Neutrosophic Systems with Applications

This paper proposes a neutrosophic extension of max-plus algebra for solving mixed systems of linear equations and inequalities.Classical max-plus algebra is a powerful tool for modeling synchronization in discrete-event systems LastNatpreClose LastNatClose, but it assumes fully deterministic data.To incorporate uncertainty and indeterminacy, we reformulate the framework so that coefficients and variables are expressed as neutrosophic numbers

γ+λI,γ,λ∈ℝ,I∈[0,1],

where I quantifies the degree of indeterminacy.

We redefine the max-plus semiring in this neutrosophic setting, extend solvability and uniqueness results, and adapt the ONEMLP-EI algorithm LastNatpreClose LastNatClose to handle neutrosophic …

Mapping Sustainability To Cybernetic-Generative Artificial Intelligence-Based Education: An Innovative Neutrosophic Orbifold-Lattice Methodology, Mona Mohamed, Ahmed A. Metwaly

Neutrosophic Systems with Applications

The lightning-fast development of artificial intelligence (AI), notably generative artificial intelligence (Gen AI) technologies, has intrigued multiple disciplines, particularly education. In this context, Large Language Models (LLMs) serve as beneficial cognitive resources that address knowledge deficits and provide tailored educational support for learners and staff. For learners, LLMs are regarded as knowledgeable educators who offer prompt, focused responses and rationales to tricky queries. Whereby LLMs for staff, Strength enhancer, automating tedious tasks, and creating intelligent resources.Gen AI’s rapid growth offers enormous obstacles for educational systems, compelling them to discover solutions for these obstacles.

Conceptually, cybernetics is leveraged for bridging the …

Neutrosophic Σ - Baire Spaces, R. Vijayalakshmi, F. Josephine Daisy, M. Simaringa

Neutrosophic Systems with Applications

A Neutrosophic Baire Space extends the concept of Baire Space from classical topology to the realm of neutrosophic topology which deals with sets and spaces where truth, falsehood and indeterminancy are explicitly considered. In this paper the concept of neutrosophic σ - baire spaces are introduced in Neutrosophic topological spaces. Also Neutrosophic σ - dense, Neutrosophic σ - nowhere dense, Neutrosophic σ -first category and Neutrosophic σ - second category sets are defined. Several characterizations of neutrosophic σ - baire spaces are investigated and explained using examples and the conditions under which a neutrosophic topological space becomes a neutrosophic σ …

A Modular Design And Construction Framework For Enhancing The Sustainability Of National Housing Projects In Egypt, Ayman Ahmed Ezzat, Farah Ibrahim El Sahzly

Mansoura Engineering Journal

Egypt’s national housing sector faces mounting sustainability challenges due to outdated design and construction practices that cause material waste, high costs, and inefficient resource use. This study develops a framework for integrating modular design and construction principles into Egypt’s National Housing Projects (NHPs) to strengthen their social, economic, and environmental sustainability. A mixed-method approach combined a literature review, case studies, and a survey of Egyptian Architectural Design Firms (ADFs). The literature review revealed a global consensus on the benefits of modular design and construction, such as improved efficiency, reduced waste, and faster project delivery, yet found limited adoption in Egypt …

Financial Risk Trends During Covid-19: A Comparative Analysis Of Three Major U.S. Airlines (2020-2022), Kamanda Mosongo

The Journal of Purdue Undergraduate Research

No abstract provided.

Analyzing Ethics Education Strategies In Biomedical Engineering Programs, Sanjana Prashanth

The Journal of Purdue Undergraduate Research

No abstract provided.

Application Of Reinforcement Learning To Precision Aerial Delivery System Control In Adverse Wind Conditions, Radman Zarbock

The Journal of Purdue Undergraduate Research

Precision aerial delivery systems (PADS) are a subset of airdropped parachute-leveraging package delivery systems that use autonomous guidance, navigation, and control (GNC) to reach targets with high degrees of accuracy. This technology emerged in the 1990s, and strides have been made since to improve the reliability of traditional physics-based controllers that guide PADS. However, these algorithms still struggle to deliver acceptable performance results when PADS are subjected to austere operating environments, such as those with unpredictable wind. Building on a foundational study in 2022 that used artificial intelligence (AI) and machine learning to improve PADS GNC performance, this study aims …

Flood Prediction With Sentinel-1 Synthetic Aperture Radar From Hurricane Helene, Jingyu Xiao, Jessica Li

The Journal of Purdue Undergraduate Research

Floods are the most common natural disaster globally, causing thousands of deaths every year. Timely and accurate flood forecasts are crucial for developing early warning systems, evacuation plans, and effective strategies to enhance community resilience. Soil moisture is an important parameter in flood forecasting. Unfortunately, existing soil moisture sensor networks and optical remote sensing–based techniques for soil moisture estimation lack the spatial resolution needed for accurate flood forecasting. This study presents an approach for flood prediction using Sentinel-1 C-band synthetic aperture radar (SAR) data. SAR offers high spatial resolution and operates day and night under all weather conditions, making it …

Impact Of Slot Liner Compression On The Total Thermal Resistance Of The Stator-Winding Assembly In Electric Motors, Lindsay Sutherland

The Journal of Purdue Undergraduate Research

The increasing demand for high-performance electric motors, driven by the rapid adoption of electric vehicles, necessitates effective thermal management techniques that improve their safety, efficiency, and reliability. Heat must be transferred from the current-carrying copper windings to the metallic stator body through an electrically insulating material called the slot liner. However, little research has focused on the interactions between the slot liner and the windings. This study examines the impact of slot liner compression on the thermal resistance across the stator-winding assembly considering two common slot liners: Nomex® 410 and Kapton® MT+. A mock stator-winding assembly was developed by stacking …

Validation Of Innovative Method Of Murine Vertebral Compression Testing, Sarah Staller

The Journal of Purdue Undergraduate Research

Murine vertebral compression testing is a common technique to quantify trabecular bone biomechanics. Having a precise method of vertebral compression is important for aiding researchers in making clinically relevant discoveries in musculoskeletal research. While many methods exist in literature, there has yet to be established a universal protocol for this procedure. Many challenges exist in vertebral compression, such as the irregular shape of the vertebral body (trabecular region of interest), uneven endplate surface morphology, and surrounding cortical processes. Therefore, the aim of this study was to develop a new method of vertebral compression that accounts for these factors and to …

The Automation Of Lamp Biomolecular Assays Using The Eppendorf Epmotion™ 5075 Robotic Pipettor, Shamalaa Sathiasealan

The Journal of Purdue Undergraduate Research

Loop-mediated isothermal amplification (LAMP) is a nucleic acid amplification technique known for its specificity and efficiency in less controlled environments than laboratories. Designing novel LAMP reagents requires strict contamination control, and unlike the more commonly automated polymerase chain reaction, LAMP’s heightened sensitivity poses unique challenges to automation. To address this, we optimized automation procedures for LAMP using a robotic pipettor without altering the core assay itself. This project focuses on minimizing contamination using sealed plates, reducing operator intervention by automating pipetting, and preventing enzyme degradation using cooling plates. Our approach employs pre-slit pierceable seals and cooling blocks to prevent cross-contamination …

Implications Of Noninvasive Blood Pressure Pumps On Mean Arterial Pressure, Sammie Miller

The Journal of Purdue Undergraduate Research

Noninvasive blood pressure pumps are recommended as the primary form of acquiring patient blood pressure to test for blood poisoning. The Philips IntelliVue Patient Monitor MP5, the Philips SureSigns VS4/VS3 Vital Signs Monitor, the Philips EarlyVue VS30 Vital Signs Monitor, the Philips IntelliVue Patent Monitor MP2/X2, the Philips IntelliVue Patent Monitor MMS, and the Philips IntelliVue Patent Monitor MP3/X3 were tested for accuracy. The control condition for hypotension was 95/55 (68) mmHg, normal blood pressure was 120/80 (93) mmHg, and hypertension was 155/85 (108) mmHg. The order of values is arrayed according to diastolic, systolic, and mean arterial pressure. The …

From Test Tracks To Carbon Tracks: Evaluating The Carbon Emissions Of Autonomous Vehicle Development, Sarah Deniz

The Journal of Purdue Undergraduate Research

Autonomous vehicle (AV) development has seen a sharp increase in the past 10 years, and there is a significant energy cost of training AVs to meet safety regulations. The training process includes virtual simulation training as well as physical training on public roads and within private testing facilities. The high energy expenditure associated with AV training has a respective environmental cost that can be quantified as a lifetime “carbon debt” of released carbon emissions. The environmental sustainability of AVs has not been thoroughly studied in currently available literature, and this paper showcases a model that quantifies the total “carbon debt” …

A Parallel Interval Modeling Framework For Nonlinear Systems: Application To A Modified Duffing Oscillator, Roman Voliansky, Nina Volianska

Northeast Journal of Complex Systems (NEJCS)

The paper presents a mathematical framework for converting nonlinear dynamical systems into parallel forms. This framework replaces the exact system motion equations with interval equations, enabling the representation of nonlinear functions over piecewise linear domains. Such representation enables the description of system motions using linear-like differential equations, which can be analyzed and manipulated using well-known control methods. One such method is eigenvalue analysis, a powerful tool in classical control theory since many techniques rely on the system’s characteristic polynomial and its eigenvalues. We apply this method to define interval system eigenvalues and track their variation during system operation. These eigenvalues …

A Proposed Secure Video Using Lightweight Chacha20 Based On Chaotic Map, Hadeel Mohammed Taher, Ali Makki Sagheer

Iraqi Journal for Computer Science and Mathematics

Multimedia content has become a necessary part of our daily lives in many domains, including medical imaging, surveillance, and entertainment. Among all multimedia categories, video is mainly critical because of its high content density and large size. For that, ensuring the security of video has become a necessity for transmission and storage. This paper proposed an enhancement to the Chacha algorithm integration with a hybrid chaotic map for generating keys to secure video. The main motivation for the selection ChaCha algorithm is that it is fast, simple, and appropriate for widespread applications, whereas the motivation for using chaos is to …

A Comprehensive Review Of Dental Diseases Detection And Classification Based On Artificial Intelligence Techniques, Nermeen N. Noaman, Yasmin M. Alsakar, Naira E. Elazab, Waleed M. Mohamed, Mohamed E. Ezzat, Mohammed M. Elmogy

Mansoura Engineering Journal

In dentistry, many diseases, such as gum, cavities, and oral cancer, affect people of all ages. Early treatment and diagnosis are crucial for minimizing dental diseases' effect on overall health and saving money in the long run. Traditional dental diagnosis methods, such as manual probing and visual inspection, are time-consuming and can be subject to human errors. Hence, a computer-aided diagnosis system based on computer vision and artificial intelligence (AI) techniques is needed. The considerable progress in computer vision and AI techniques offers many possibilities in dental diagnosis based on dental X-ray imaging modalities. Dental X-rays are used to diagnose …

Evaluating Traffic Safety And Geometric Characteristics Using Machine Learning Ensemble Techniques: A Case Study Of Egyptian Rural Multi-Lane Divided Roads, Sania R. Elagamy, Ahmed N. Awaad, Usama E. Shahdah, Sherif M. El-Badawy, Marwa E. Elbany, Eman K. Ali

Mansoura Engineering Journal

Crash prediction models are essential for evaluating traffic safety by analyzing crash occurrence, frequency, or severity. Recently, machine learning techniques have gained prominence in statistical regression modeling and data analysis. This study assesses the effectiveness of machine learning in predicting crashes on Egyptian rural multi-lane divided roads using limited regional data. Supervised machine learning ensemble techniques were applied to predict crash-prone segments (classification) and estimate the total number of crashes per segment (regression). A comparative analysis aims to identify the most suitable method. The Synthetic Minority Oversampling Technique (SMOTE) addressed data imbalance, while K-means Clustering (KC) enhanced regression model accuracy, …

Hybrid Machine And Deep Learning Framework For Secure Fog-Based Vanets, Hadeer Kamal, Amira Y. Haikal, Mahmoud M. Saafan

Mansoura Engineering Journal

As a conventional implementation of intelligent transportation systems (ITS), a Vehicular Ad-hoc Network (VANET) facilitates smart communication between vehicle nodes and network infrastructures. Nevertheless, the distributed and dynamic characteristics of VANETs make them vulnerable to numerous cyberattacks like DOS and spoofing. Rapid detection of these threats is crucial. It is essential to respond promptly to mitigate threats before they impact vehicle coordination or infrastructure functionality. In this context, fog computing presents an effective solution. Transferring computational tasks from centralized cloud servers to fog nodes allows for quicker detection within the VANET environment. This research utilizes computational resources for swift and …

Integration Of Algae In Buildings: Challenges And Opportunities, Marwa Said Saad, Mostafa Refaat, Ashraf Nessim

Mansoura Engineering Journal

Buildings produce 40% of energy-associated CO2 emissions and 35% of worldwide energy use which makes it one of the main factors of global warming. The use of bioactive materials on building façades is a creative way to address the aforementioned problems. The biotechnical potential of microalgae architecture to achieve net-zero energy architecture while simultaneously advancing ecological sustainability and occupant well-being has drawn attention. This paper aims to analyzing and investigating techniques of integration of algae in architecture showing the challenges and opportunities of this implementation. Analytical and Comparative analytical method were used in this paper, Initially, a thorough literature review …

Trustworthy Ai: Prohibited Practices, Ethical Principles, And The Identification Of Problems, Anna Karmańska

Journal of Global Awareness

The following considerations arise from the study of texts of documents of a legal nature and from the author’s judgments. They do not present the results of the author’s own empirical research; however, they constitute a factual study that is important for their undertaking in the next step. Having given concern but also hopes for AI, the author focuses her attention on issues that, not only in her opinion, have a strong bearing on the preservation of humanity in a digital environment and at the same time with technocratic features. These issues (prohibited practices, high-risk systems, and ethics) related to …

Object Tracking Based On Quantum Particle Swarm Optimization, Rajesh Misra, Kumar Ray

Journal of Global Awareness

In Computer Vision domain, moving Object Tracking is considered as one of the toughest problems. As there are so many factors associated like illumination of light, noise, occlusion, sudden start and stop of moving object, shading which makes tracking even harder problem not only for dynamic background but also for static background. In this paper we present a new object tracking algorithm based on Dominant points on tracked object using Quantum particle swarm optimization (QPSO) which is a new different version of PSO based on Quantum theory. The novelty in our approach is that it can be successfully applicable in …

Programing Ai With Ethics, Conor Anderson

Best Integrated Writing

As artificial intelligence grows increasingly ubiquitous, it’s pertinent to examine its fundamentals as well as its greater implications. Anderson discusses the ethical implications of AI.

View captioned video at https://youtu.be/LBTVEMm_C70

Development Of An Iot-Based Energy Theft Detection System For A Single-Phase Smart Meter, Ojo Julius Oladele, Funso Kehinde Ariyo, Samson Oladayo Ayanlade, Ayooluwa Peter Adeagbo, Ismail Adeniyi Adeleke

Al-Bahir

Electricity theft causes annual global losses exceeding $96 billion, severely impacting distribution networks. This paper presents a novel IoT-based system integrating current differential sensing, physical tamper detection, and edge-cloud analytics to detect energy theft in single-phase smart meters. The design employs three ACS712 current sensors to monitor Kirchhoff-compliant current flow at the grid pole, meter input, and load output, coupled with a PIR sensor for cabinet intrusion. A SIM800L GSM module enables real-time theft alerts and remote disconnection, while closed-loop control autonomously restores power after tamper resolution — a feature absent in prior GSM-only systems. An Android application provides geotagged …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …