Engineering Commons^™

Exploring The Horizontal Static And Dynamic Shading Devices To Minimize Cooling Load In Tropical Buildings, Hilmi Fitriatulamal, Ova Candra Dewi, Miktha Farid Alkadri, Kartika Rahmasari

CSID Journal of Infrastructure Development

Shading devices are essential for reducing solar radiation and cooling loads in buildings located in tropical climates. In the Jakarta region, the highest solar factor is observed on west- and east-facing facades, followed by north- and south-facing orientations. National building policy in Indonesia encourages facades to face north–south to reduce solar heat gain. This study explores horizontal static and dynamic shading devices on north-facing facades and evaluates their impact on cooling load reduction and daylight performance. The methodology includes calculating and simulating energy use intensity (EUI) using EnergyPlus and conducting illuminance analysis using Radiance and Grasshopper. Key parameters considered in …

Decision Framework For Enhancing The Adoption Of Alternative Infrastructure Funding Models In Ghana, Samuel Kojo Aidoo, Patricia Lindelwa Makoni

CSID Journal of Infrastructure Development

This paper examines the socio-economic and infrastructure conditions that determine Ghana’s readiness to adopt alternative infrastructure funding models (AIFMs) for sustainable road development. The objective of the study is to identify the macroeconomic and sectoral drivers of AIFMs’ adoption and to develop policy frameworks for the sustainable financing of infrastructure within Ghana’s context. Ordinary Least Squares (OLS) regression analysis is applied to annual data from 2003 to 2023 to examine the relationship between macroeconomic and infrastructure indicators and economic growth , which is used as a proxy for the viability of AIFMs. The results show that employment growth, educational attainment, …

The Ethical Code Of Access And Use, Modeled By Archival Educator Aurora E. Davis, Jennifer A. Walker, Sarah A. Buchanan, Charissa F. Ercolin

Provenance, Journal of the Society of Georgia Archivists

Archival education has a legacy of collective development between professionals, educators, and students of archives. Longitudinal attention to archival pedagogy can greatly inform ongoing curricular directions, so that students always emerge from their archival program ready to manage complex collections in wide-ranging professional settings. One academic archival program’s first archival educator brought to her role relevant experience from both the aviation and newspaper industries that shaped her pedagogical impact on students. This paper considers the origins of archival education at the University of Missouri through the work of Aurora E. Davis, who served as a faculty member at the School …

International Engineering Education In Turbulent Times: Reflections, Strategies, And Visions In Honor Of John M. Grandin, Sigrid Berka, Mark W. Rectanus

Journal of International Engineering Education

At a time when private and public universities are facing the potential of significant cuts in federal funding for research and education, international engineering education programs need to navigate the turbulent landscape facing higher education at large and consider how they might reposition themselves within it. In this collection of essays dedicated to the memory, vision and legacy of the late Dr. John Grandin, we remind international educators that by mobilizing innovative thinking and an entrepreneurial spirit they can propel change in a seemingly deadlocked academic landscape. We have asked some of Dr. Grandin’s colleagues – who have led interdisciplinary, …

Impact Of The International Engineering Program (Iep) At The University Of Rhode Island (Uri): What’S In It For Languages And For Engineering?, Sigrid Berka

Journal of International Engineering Education

No abstract provided.

Garnering External Support For Languages In International Engineering Programs, Michael A. Nugent

Journal of International Engineering Education

No abstract provided.

Study Abroad And Languages: Leveraging Study Abroad For Engineering Education During Turbulent Times, Chad M. Gasta

Journal of International Engineering Education

No abstract provided.

Cooperative Education And Partnerships With Industry, Chris Cooper, Gayle G. Elliott

Journal of International Engineering Education

No abstract provided.

Collaborations And International Partnerships: Keys For International Education In Times Of Change, Bettina Cothran, Amy Bass Henry

Journal of International Engineering Education

No abstract provided.

International Engineering Education In Turbulent Times: Concluding Observations And Selected Publications By John M. Grandin, Sigrid Berka, Mark W. Rectanus

Journal of International Engineering Education

No abstract provided.

Effect Of Local Steel Slag Incorporation On The Mechanical Properties Of Concrete, Ahmed Safaa Tariq Karmah, Wissam Khadum Alsaraj, Luma A. Zghair

Al-Esraa University College Journal for Engineering Sciences

The increasing interest in the production of concrete through the utilization of inexpensive materials has caused a rise in the number of studies concerning the use of materials with cementitious properties, such as Silica Fume, Slag, Fly Ash and other pozzolanic materials. Moreover, the increasing amounts of Steel Slag being produced from local factories that are being deposited without an available method of disposal provides an opportunity to harness the Slag in the production of an inexpensive, and possibly better concrete. Slag has been used as both an addition and substitution of the cement and fine aggregate. The mixtures included …

Decoding Climate Change: A Comprehensive Statistical Insight Into Temperature Anomalies In Iraq And Its Neighboring Countries, Jameel T. Al-Naffakha, Mohammed R. Al-Qassabanda, Israa Jafar

Al-Esraa University College Journal for Engineering Sciences

This study applies advanced statistical techniques, including the Mann-Kendall Trend Test and ARIMA forecasting, to validate and predict temperature anomalies across Iraq and its neighboring countries (2014–2024). Findings confirm a statistically significant warming trend (p < 0.00000005) across all nations, with Syria (1.02°C) and Turkey (0.97°C) experiencing the highest anomalies. GIS-based spatial analysis highlights regional disparities, identifying climate-vulnerable zones. The persistent rise in temperature anomalies correlates with worsening water scarcity, desertification, and extreme weather events, including prolonged droughts and heatwaves. Iraq’s peak anomaly (1.48°C) has exacerbated heat stress, agricultural decline, and reduced river inflows, while Kuwait and Saudi Arabia struggle to maintain critical infrastructure under record-breaking temperatures exceeding 50°C. These climate shifts pose severe risks to water availability, food security, and energy demand, necessitating urgent policy interventions. Key recommendations include enhanced water resource management, climate-adaptive agriculture, and renewable energy expansion. If left unaddressed, rising temperatures could destabilize the region, increasing socio-economic vulnerabilities and escalating resource conflicts. This study underscores the need for cross-border collaboration and sustainable adaptation policies to mitigate the long-term impacts of climate change in the Middle East.

Optimal Power Flow Control In The Iraqi Power Grid Using Artificial Intelligence Algorithms For Carbon Emission Reduction, Mohammed Shakir Juber

Al-Esraa University College Journal for Engineering Sciences

Iraq’s power sector remains in a protracted and severe crisis characterized by a significant mismatch between supply and demand, high levels of losses during transmission and distribution, as well as an increasing challenge to the resources base being largely unfavourably. These inefficiencies impose heavy costs on the national economy in excess of 40 billion annually and they also reinforce greenhouse gas emissions, and exacerbate environmental issues. To deal with these problems, we proposed in this paper that a new hybrid AI tool should be developed for the solution of multi-objective optimization problem based on purpose Genetic Algorithm (GA) merger with …

Applying Machine Learning Techniques For Early Detection Of Cyber Attacks On Iot Devices, Noor Adnan Allamy

Al-Esraa University College Journal for Engineering Sciences

This research designs, implements, and evaluates a machine learning-based framework for the early detection of cyber attacks targeting Internet of Things (IoT) devices, with a specific focus on the context and challenges present in Iraq. The study conducts a comparative analysis of three supervised learning algorithms—Support Vector Machine (SVM), Random Forest (RF), and Deep Neural Networks (DNN)—using a combination of benchmark datasets (NSL-KDD, CIC-IDS-2017, Bot-IoT) and a synthesized dataset adapted to simulate the Iraqi threat landscape. Key performance metrics, including accuracy, precision, recall, and F1-score, were used for evaluation. The proposed Random Forest model demonstrated superior performance, achieving an accuracy …

Ai-Enhanced Heat Transfer Optimization In Magnetic Bio-Nanofluids, Hasan Attyah Shaboot

Al-Esraa University College Journal for Engineering Sciences

This study presents a hybrid Artificial Intelligence–Computational Fluid Dynamics (AI-CFD) framework for optimizing heat transfer in magnetic bio-nanofluids subjected to external magnetic fields. Magnetic bio-nanofluids, composed of biocompatible base fluids containing superparamagnetic nanoparticles, exhibit tunable thermal and flow behavior, making them promising for biomedical and micro-cooling applications. Conventional optimization methods based on experiments or brute-force CFD are computationally expensive and limited in exploring the full design space. To overcome these challenges, an Artificial Neural Network (ANN) surrogate model was developed to predict two key performance indicators, the Nusselt number and the friction factor, with high accuracy (R² > 0.997). The surrogate …

Hybrid Experimental–Computational Study On The Energy Absorption Of Graphene Nanoplatelet-Reinforced Sandwich Structures, Hamdan Yousif Hamdan

Al-Esraa University College Journal for Engineering Sciences

Background: Sandwich composites are widely used in aerospace, automotive, and marine applications because of their lightweight, stiffness, and strength, but they remain prone to out-of-plane impacts and barely visible impact damage (BVID). Graphene Nanoplatelets (GNPs) have shown strong potential to improve fracture toughness and impact resistance. However, hybrid experimental–computational studies applying such reinforcement are still lacking in developing contexts like Iraq, where practical and accessible solutions are essential. Aims: The study investigates the effect of GNP reinforcement on the low-velocity impact behavior and energy absorption of glass fiber/epoxy sandwich panels with PVC foam and balsa wood cores. Objectives include fabricating …

Effect Of Thick Closed Walls Of West And South Elevations Of Iraqi Middle And South Territory Housing Building On Reducing Energy Use, Abeer Qasim Jbur, Shaimaa M. Hamza, Mayyadah Lutfi Abdulwahhab

Al-Esraa University College Journal for Engineering Sciences

Thermal insulation is one of the most important factors in achieving sustainability, increasing efficiency, and reducing energy consumption, but modern insulation materials are expensive, in addition to their availability. Therefore, through our research, we resorted to investigating the issue of reducing thermal load in buildings through the use of thick-walled facades in the southern and western facades, where we studied a building with two windows with windows on the southern and western facades and another without these windows and with thick walls, for two locations, the first in central Iraq, which is the city of Baghdad, and the second in …

The Impact Of Ethyl Levulinate Additive On Diesel Engine Performance And Emissions: An Experimental Study, Maha Ali Ghadbaan

Al-Esraa University College Journal for Engineering Sciences

This study explores the environmental and operational impact of adding Ethyl Levulinate—a biodegradable ester derived from biomass—to diesel fuel. A fuel blend known as B5El6 (comprising 5% biodiesel and 6% Ethyl Levulinate) was prepared and tested experimentally using a single-cylinder diesel engine operating at a constant speed of 1500 rpm under full load conditions. Performance metrics and emission data were recorded, and a Life Cycle Assessment (LCA) was conducted using the IMPACT2002+ methodology.

The results revealed that B5El6 significantly reduced greenhouse gas emissions (100 kg CO2 eq) and improved ecosystem quality. However, it presented challenges in terms of human health …

The Role Of The Scenario In Formulating The Contemporary Architectural Text, Rounaq Arif Mohsin, Abbas Ali Hamza, Bashar Shamil Alkhafaji

Al-Esraa University College Journal for Engineering Sciences

In order to create an integrated architectural text, which is a complicated art that blends beauty and practical elements, a rigorous design procedure is necessary. In this situation, the scenario’s role becomes crucial in developing the current architectural text and directing architectural approaches. In order to better understand how the scenario influences the design process and the interactions between various architectural aspects, this project intends to explore and analyze the impact of the scenario in developing and refining architectural text formulation approaches.

The study looks at the idea of a scenario and how it has been used in architecture, as …

Investigation Of Some Physical Properties Of Slurry Infiltrated Fibrous Concrete (Sifcon) Under Different Curing Times, Rand Kh. Mahmoud, Mohmmed Juad Khadhim, Fayq Hasan Jabbar

Al-Esraa University College Journal for Engineering Sciences

This research studied the effects of different types fibers (Basalt, Carbon and Basalt-Carbon hybrid mix) and curing ages (7, 14, 28 and 56 days) on some physical properties of - Slurry infiltrated fibrous concrete (SIFCON). Density, ultrasonic pulse velocity UPV, Poisson’s ratio and water absorption were measured for the experimental study with 30% cement replacement by Class F fly ash to increase sustainability. It was found that properties were significantly affected by the type and dosage of fiber admixture. The UPV was enhanced by basalt fibers and the absorption reduced up to an optimal range of 3–5% after which agglomeration …

Optimal Sizing Of Pv Water Pumping System For Off-Grid Rural Communities, Basma Abulkheir, Eid Gouda, A. A. Hegazi, Amir Abdel Menaem

Mansoura Engineering Journal

A large population worldwide lives in remote rural communities without access to electricity due to the limited reach of national transmission networks. This creates significant challenges in accessing water, hindering improvements in living conditions for off-grid communities. Photovoltaic water pumping systems (PVWPSs) offer a viable solution to this issue, but their sustainability must be examined due to the unpredictable nature of solar radiation. This paper presents a practical techno-economic approach to optimally size a PVWPS. A Particle Swarm Optimization (PSO) algorithm is employed, considering technical and economic indicators like life cycle cost, loss of load probability and PV curtailment rate. …

Smart Building Rating System: A Comparative Analysis Of National And International Rating Systems, Amanah Hamidah, Mohammed Ali Berawi, Mustika Sari, Gunawan Saroji

CSID Journal of Infrastructure Development

Smart buildings have become a key part of the Fourth Industrial Revolution, driven by the need for efficient, sustainable, and adaptive built environments. Their importance is growing alongside Indonesia’s effort to develop smart cities. This study compares Indonesia’s national smart building certification system, established under Ministerial Regulation No. 10 of 2023, with two international systems: the European Union’s Smart Readiness Indicator (SRI) and the SmartScore certification. The analysis uses a literature review and comparative method to examine each system’s assessment criteria, scoring method, and certification tier. The findings show that Indonesia’s regulation includes six parameters, such as cybersecurity and operational …

Real-Time Deep Learning Detection Of Toraja Carving Motifs Using Yolo11m For Cultural Heritage Preservation, Herman Herman, Farid Wajdi Mufti, Abdul Rachman Manga, Haidawati Nasir

Knowledge Engineering and Data Science

Toraja carvings are an important part of Indonesia’s cultural heritage, rich in symbolic, aesthetic, and philosophical meaning. However, the identification and preservation of carving motifs still rely on subjective, time-consuming manual processes, limiting scalability and inconsistent knowledge transmission. From a Knowledge Engineering and Cognitive Data Science perspective, this challenge highlights the need for mechanisms that can transform visual cultural artifacts into structured, machine-interpretable knowledge. This study investigates the use of the YOLO11m model as a data-driven approach for modeling cultural knowledge through automated detection of three Toraja carving motifs: pa_tedong, pa_kapu_baka, and pa_manu_londongan using original images collected directly from traditional …

Health Risk Assessment (Hra) In Home-Based Ironing Businesses: Risk Identification, Intervention, And Evaluation In Johar Baru District, Central Jakarta, Heru Alfares, Irawadi Darmaputra, Marsen Isbayuputra, Muhammad Ilyas

Occupational and Environmental Medicine Journal of Indonesia

Background Home-based ironing businesses in Johar Baru District, Central Jakarta, are part of the informal sector, vulnerable to health risks due to suboptimal working conditions. This study aims to identify, assess, and control health risks through a Health Risk Assessment (HRA) approach.

Methods Research methods include direct observation, interviews, environmental measurements, health screenings, and ergonomic surveys using the BRIEF (Baseline Risk Identification of Ergonomic Factor) instrument.

Results The results indicate that the temperature in the ironing area reaches 33°C, exceeding the comfort standard, and that 80% of workers have dark yellow urine, indicating a high risk of dehydration. Risk assessment …

Control Strategies For 6-Dof Quadcopter Uavs: Cascade Pid Stabilization In White Noise Conditions, An Vo Van, Hung Ha Duy

Makara Journal of Technology

In this study, a cascade PID control structure is proposed and implemented for a 6-degree-of-freedom (6-DOF) unmanned aerial vehicle (UAV) to enhance stability and trajectory tracking capabilities under both noise and non-noise conditions. The controller was designed based on the Tyreus–Luyben tuning method and was evaluated using quantitative metrics, including rise time, settling time, overshoot, and steady-state error. Simulation results on MATLAB/Simulink show that the controller achieves high performance in angular channels (ϕ, θ, ψ) and altitude (z) with a short rise time (< 2s), slight overshoot (< 1%), and nearly eliminated steady-state error. However, the horizontal position channels (x, y) have a longer settling time (~110s) and are sensitive to white noise. Quantitative comparisons with other control methods show that the cascade PID outperforms the standard PID in terms of accuracy and stability, achieving a performance comparable to LQR under noise-free conditions, but is less robust in the presence of noise than advanced methods like SMC and MPC. These results confirm the feasibility of cascade PID in UAV applications and indicate potential future improvements by integrating nonlinear, adaptive, or intelligent control strategies.

Mechanical And Durability Properties Of Cement Panels Reinforced With Hybrid And Pva Fibers, Shukran H. Faraj, Mohammed J. Kadhim

Al-Esraa University College Journal for Engineering Sciences

This study examines the synergistic effects of hybrid fibers (HF) and polyvinyl alcohol (PVA) fibers on the structural and thermal properties of silica-fume cement panels. Scanning electron microscopy (SEM) was employed to examine mortar mixtures with varying fiber content to assess their enhancement of microstructure. We conducted several experiments on compressive, flexural, and splitting tensile strength, in addition to water absorption and thermal conductivity. The results indicate that 1% HF exhibits superior mechanical qualities, with a compressive strength of 46.89 MPa, a flexural strength of 8.56 MPa, and a reduced thermal conductivity of 0.83 W/m•K. PVA fibers at 2% enhance …

Experimental Analysis Of Droplet Deformation Dynamics In Combined Dc Electric And Shear Flow Fields Using Dpiv, Ayad Ibrahim Khlewee

Al-Esraa University College Journal for Engineering Sciences

This paper presented a systematic study of such droplet deformation at the intersection of uniform DC electric field and hydrodynamic shear flow, in which we focused on conductivity ratio (R) and permittivity ratio (S), describing their influence. The results demonstrate that droplet dynamics is extremely sensitive to the regime: under DC only, either elongation or compression depending on whether R > S or R S, similarly to classical EHD predictions. Under shear-only conditions, deformation was dictated by the balance of elongational stresses (EC) and rotational stresses (RC), with increasing capillary number (Ca) leading to progressive elongation and oscillatory orientation dynamics. When …

The Imaginary In Architecture: The Conceptual Structure Of The Imaginary And Its Manifestations In Architectural Text, Noora Ghadir Hlail, Abbas Ali Hamza Al Greiza

Al-Esraa University College Journal for Engineering Sciences

This study explores the concept of the imaginary as a collective cognitive and cultural structure that shapes symbolic reality through images, myths, and deeply rooted symbols in collective memory. The research applies this concept within the field of architecture, aiming to understand how the imaginary is embodied in architectural texts as symbolic carriers of identity and cultural meaning. Adopting a descriptive-analytical methodology, the study develops a theoretical framework comprising key components—preconditions, mechanisms, and traits of the imaginary—and applies it to two selected case studies: the General Secretariat of the Iraqi Council of Ministers and the Louvre Abu Dhabi Museum. The …

Generative Ai For Method Development In Analytical Chemistry: A New Paradigm In Experimental Design And Optimization, Yasir Fathi Mahmood

Al-Esraa University College Journal for Engineering Sciences

The fast development of artificial intelligence (AI), especially generative AI models, is changing the environment of analytical chemistry. As classical method generation in analytical methods relies on manual trial-and-error methodology as well as statistical methods, generative AI is a new paradigm with automated generation of experimental methodology and optimization. In this paper, the authors discuss the use of generative AI-based technologies, including large language models (LLMs) and neural network-based generators, to create new, efficient, and customized methods of analysis. The paper examines existing applications, technology frameworks, and issues and offers a roadmap with regards to the future incorporation of generative …

Numerical Modeling And Experimental Validation Of A High-Temperature Latent Heat Thermal Energy Storage System Using Metallic Phase Change Materials For Concentrated Solar Power Applications, Fouad Hashim Sharhan

Al-Esraa University College Journal for Engineering Sciences

To ensure reliable performance for the power-block of CSP plants, high power density and near-isothermal discharge must be achieved. A robust means of achieving this is through thermal energy storage (TES). High temperature latent heat storage (LHS) with phase change materials (PCMs) can serve these purposes, however the conventional salts used in PCMs typically suffer from low thermal conductivity that limits power density and increases energy storage charging/discharging times. This manuscript investigates ways to address these limitations using high temperature metallic phase change materials (MPCMs) while also developing a validated numerical framework to aid in their design. To this end, …