Engineering Commons^™

An Integrated Network Modeling Framework For Analysis Of Multi-Line Order Pick Systems, Debjit Roy, Vishal Bansal

International Material Handling Research Colloquium

Poster 16

Panel Session #2: Ecom Fulfillment And The Physical Internet: Some Motivation And A Persistent Challenge, Benoit Montreuil, Russell D. Meller, Eric Ballot

International Material Handling Research Colloquium

Panel Session 2

Panelists: Benoit Montreuil, Russell Meller, and Eric Ballot

Moderator: Kimberly Ellis

Progress In Autonomous Picking As Demonstrated By The Amazon Robotics Challenge, Dominik Colling, Jonathan Dziedzitz, Kai Furmans, Patric Hopfgarten, Kai Markert

International Material Handling Research Colloquium

Poster 17

Synthetic Order Generator For Picking Data, Mohammadnaser Ansari, Jeffrey S. Smith, Behnam Rasoolian

International Material Handling Research Colloquium

Poster 4

Service Flow Networks For Functional Design Of Distribution Centers, Michael Schmidt, Detlef A. Spee, Michael Ten Hompel

International Material Handling Research Colloquium

Poster 15

Optimization Of A Fast-Pick Area In Cosmetics Distribution Center, Mario C. Velez-Gallego, Alice E. Smith

International Material Handling Research Colloquium

Poster 18

A Space-Syntax Analysis Of The Relationship Between Function And Form In Facility Layout, Alejandro Teran-Somohano, Alice E. Smith

International Material Handling Research Colloquium

Poster 1

Pull-Driven Order Fulfillment In Distribution Centers, Dima Nazzal, Shankar Shanmugasundaram, Sung Kim, Russell D. Meller

International Material Handling Research Colloquium

Poster 22

Scalable Heuristic For Locating Distribution Centers On Real Road Networks, Saeed Ghanbartehrani, J. David Porter

International Material Handling Research Colloquium

Poster 13

A Design Methodology To Optimize Supply Chain Network Performance, Dheeraporn Nippaya, J. David Porter

International Material Handling Research Colloquium

Poster 5

Keynote: The Small World Of Material Handling Rearch, Parag J. Siddique, Kevin Gue, Md Salahuddin Ayuby

International Material Handling Research Colloquium

Keynote Address

Panel Session #1: Production Logistics In The Industrie 4.0 Era, Kai Furmans, Fabio Sgarbossa, Tone Lerher

International Material Handling Research Colloquium

Panel Session 1

Panelists: Kai Furmans, Fabio Sgarbosse, Tone Lehrer

Moderator: David Porter

Improving The Environmental Sustainability Of Pallet Logistics Through Preemptive Remanufacturing: An Integer Linear Optimization Model, Fabiana Tornese, Jennifer A. Pazour, Andres L. Carrano, Brian K. Thorn

International Material Handling Research Colloquium

Poster 2

Economic And Performance Analysis Of Dual-Bay Vertical Lift Modules, Fabio Sgarbossa, Martina Calzavara, Alessandro Persona

International Material Handling Research Colloquium

Poster 3

Deployment Of An Distributed Strategic Material Flow Control For Automated Material Flow Systems Consisting Of Autonomous Modules, Christian Lieberoth-Leden, Johannes Fottner

International Material Handling Research Colloquium

Poster 10

Differences In The Throughput Performance Of The Warehouse Depending On The Quality Of The Calculation Parameters, David Sourek

International Material Handling Research Colloquium

Poster 25

Impact Of Automonous Delivery And Last-Mile Logistics, Michael G. Kay, Peerapol Sittivijan, Bhagyalakshmi V. Shrikrishna, Bharat Kulkarni

International Material Handling Research Colloquium

Poster 19

Managing The Order Picking Process In For Click And Collect In Grocery Stores, Dale T. Masel, Akhilesh Mesa

International Material Handling Research Colloquium

Poster 14

A Practical Collaborative Material Handling Strategy For Cross-Docks, Hector J. Carlo, Stephanie Santiago-Montano

International Material Handling Research Colloquium

Poster 8

A Motion Capture System Framework For The Study Of Human Manufacturing Repetitive Motion, Jesus Jimenez, Francis Mendez, David Wierschem

International Material Handling Research Colloquium

Poster 21

15th International Material Handling Research Colloquium Program, College Industry Council On Material Handling Education, Mhi

International Material Handling Research Colloquium

Official Conference Program

Investigation Of The Skin Effect In Alternating Currents, Matthew Liang

The International Student Science Fair 2018

My research is on the investigation of the skin effect in alternating currents. The skin effect is when an alternating current tends to flow on the surface of the conductor, such that the current density is highest near the surface, and decreases with greater depths in the conductor. This is due to the alternating current inducing changing magnetic fields, which in turn induces currents that oppose the original flow of current, resisting the current flowing through the centre the most. This reduces the effective cross-sectional area of the conductor and increases the resistance, causing increased power losses. This effect becomes …

Smart Vertical Farm System (Svfs), Sarasit Sirawattanakul

The International Student Science Fair 2018

The unremitting trends of increasing population, urbanization, diminishing water supply, and continuing climate change have contributed to declining stocks of arable land per person. Land available for farming is shrinking, and the demand for food is growing. All of these lead to food insecurity. For the first version of Smart Vertical Farm System is designed to increase food productions by an automatic system. It built with shelves which support soil and hydroponic system, stacked vertically. The system first shovels the soil in the tray and sews the seeds. There is also additional watering system. The hydroponic parts are on the …

Energy Conversion System For Travelers (Ecost), Thipok Bovornratanaraks

The International Student Science Fair 2018

We have innovated “The Energy Conversion System for Travelers” or the ECoST. With the fact that most travelers have wheeled cabin-bags, whilst walking, the wheels will rotate so why don’t we harvest electricity from this kinetic energy? We thus install our innovation, the ECoST, to the bag to generate electricity from the spinning wheels. The electricity is then kept in the storage unit and ready to charge your empty battery devices in an emergency case via a USB port. To make life easy, our ECoST was designed to replicate the power bank charging method; therefore, we can charge …

Solar-Powered Bushfire Detection Mechanism, Aryaman Sud

The International Student Science Fair 2018

This project designed a prototype preventative measure for heat-induced disasters like bushfires and general home fires. The motivation for this project was the loss of life and property due to wildfire in rural Australia. The micro-controller will send an alert message and sound an alarm when the temperature value exceeds or equals the set temperature of . It is programmed using the programming language embedded ‘C’. Comprising of a solar panel, siren, temperature sensor and a Bluetooth module, this eco-friendly device can provide digitalised warnings to homes and farms where protection matters most.

Simplistic programming using the KEIL IDE software …

Using Eeg-Validated Music Emotion Recognition Techniques To Classify Multi-Genre Popular Music For Therapeutic Purposes, Dejoy Shastikk Kumaran

The International Student Science Fair 2018

Music is observed to possess significant beneficial effects to human mental health, especially for patients undergoing therapy and older adults. Prior research focusing on machine recognition of the emotion music induces by classifying low-level music features has utilized subjective annotation to label data for classification. We validate this approach by using an electroencephalography-based approach to cross-check the predictions of music emotion made with the predictions from low-level music feature data as well as collected subjective annotation data. Collecting 8-channel EEG data from 10 participants listening to segments of 40 songs from 5 different genres, we obtain a subject-independent classification accuracy …

Feco2o4 As An Anode Material For Lithium Ion Batteries, Chelsea Wong

The International Student Science Fair 2018

Lithium ion batteries (LIBs) are commonly found in many portable electronic appliances due to their ability to be rechargeable. Currently, commercial anodes in Li-ion batteries (graphite) have a theoretical capacity of around 372 mAh/g, while FeCo2O4 that will be investigated as the anode material has a theoretical capacity of 901.985mAh/g, more than double of the current commercial anode’s capacity. Earlier work done by Sharma et al also showed that FeCo2O4 has a very promising initial capacity of 827mAh/g. As such, the engineering goal is to produce a battery that will have a higher capacity than the current commercial Li-ion batteries …

Synthesis Of Double Network Hydrogels Which Can Be Shaped Freely, Natsuki Morimoto, Norie Kato

The International Student Science Fair 2018

Double network (DN) hydrogels have specific characters such as flexibility and high mechanical strength. They are expected to use biomaterials such as artificial cartilages and meniscuses. The purpose of this study is to synthesize DN gels which can be shaped freely. DN gels were synthesized by polyvinyl alcohol (PVA) as a mold, 2-acrylamide-2-methylpropane sulfonic acid (AMPS) as a first monomer, N,N’-methylene-bis-acrylamide (MBAA) as a crosslinker, 2-oxoglutalic acid (OGA) as an initiator and acrylamide (AAm) as a second monomer. First, PVA (polymerization degree; 2000) was dissolved in the water and prepared to 15 % of aqueous solution. It was poured in …

An Entirely New Molecular Glue For Mof Using Unusual Structural Transformation Of A Coordination Polymer, Sukwoo Jung, Hangyeol Kim, Junseok Ahn

The International Student Science Fair 2018

In this research, an entirely new molecular glue is reported. This ‘coordination polymer glue’ is synthesized from zinc metal and BDC-NPE(2,5-bis{4-[1-(4-nitrophenyl)ethylamino]butoxy}terephthalic acid). Molecular glue transforms from 1D coordination polymer to a 3D cross-linked framework, resulting in a phase change of solution to solid. The carboxylate group of this glue makes the preformed MOF bind to its framework. Therefore, when the solution of molecular glue is mixed with preformed MOF powder and heated, homogeneous and thin MOF film – MOF/ZnNPE film – is fabricated. The film is irrelevant to the kind of its substrate, and its thermal stability was enhanced in …

Solar-Powered Bushfire Detection Mechanism, Aryaman Sud

The International Student Science Fair 2018

This project designed a prototype preventative measure for heat-induced disasters like bushfires and general home fires. The motivation for this project was the loss of life and property due to wildfire in rural Australia. The micro-controller will send an alert message and sound an alarm when the temperature value exceeds or equals the set temperature of . It is programmed using the programming language embedded ‘C’. Comprising of a solar panel, siren, temperature sensor and a Bluetooth module, this eco-friendly device can provide digitalised warnings to homes and farms where protection matters most.

Simplistic programming using the KEIL IDE software …