Engineering Commons^™

Reliability Of Lead-Free Solder Joints Under Combined Shear And Compressive Loads, Ian Bernander, Travis Dale, Yuvraj Singh, Ganesh Subbarayan

The Summer Undergraduate Research Fellowship (SURF) Symposium

In electronic assemblies, solder joints are used to create electrical connections, remove heat, and mechanically support the components. When an electronic device is powered on, the solder joints and the board they are attached to heat up, expanding at different rates. Due to the difference in expansion, shear stress is imposed on the solder joints. As the device is powered on and off, this shear stress can eventually fracture the solder joint, causing the device to fail. Therefore, to increase the lifespan of electronics, it is important to investigate the mechanical properties of solder alloys. The present study investigates how …

High-Throughput Nanoliter Dispensing Device For Biological Applications, Cole Reynolds, Euiwon Bae Dr., J Paul Robinson Dr.

The Summer Undergraduate Research Fellowship (SURF) Symposium

Pathogen identification is a field that can contribute largely to the prevention of the spreading of illness and disease. In the past, pathogen identification has been a long and arduous process due to the time-consuming processes and steps that requires technician’s time and effort. With new technologies emerging however, screening of bacteria colonies can be done in a quick and high-throughput way. The problem is that using the current methods, bacteria cannot be transferred to petri dishes fast enough to keep up with the new screening methods. The current study focuses on exploring different methods to create an ergonomic device …

Creating A Mammary Duct Model To Study The Effects Of Cancer Heterogeneity On Tumor Metastasis, Megan Hofstetter, Mazin Hakim, Luis Solorio

The Summer Undergraduate Research Fellowship (SURF) Symposium

During tumor progression, the process of clonal evolution gives rise to a variety of cell subpopulations that cause differential sensitivity to drugs and give rise to cell populations with the ability to metastasize, there are many mouse models available that can be used to study tumor progression and metastasis. However, there is a lack of models to study the effect of tumor heterogeneity using human cancers. Xenograft based systems require the use of immunodeficient mice, which limits the use of the model to evaluate microenvironmental factors involved in metastatic dissemination. Humanized mouse models with established human immune systems have been …

Steady-State Method To Measure The In-Plane Thermal Conductivity Of Thin Sheet Materials, Evgeny Pakhomenko, Andrew James Wildridge, Abraham Mathew Koshy, Souvik Das, Andreas Jung

The Summer Undergraduate Research Fellowship (SURF) Symposium

A new generation of silicon pixel detectors is required to cope with the unprecedented luminosities at the high-luminosity phase of the Large Hadron Collider (HL-LHC) in 2025. The HL-LHC provides a high radiation, high interaction rate environment for the innermost detector region of the CMS detector. This can lead to an uncontrolled increase in temperature of the detector that can destroy the silicon pixels. Moreover, too high operating temperature can add noise to the data obtained from the detector and can slow the read out cheap down. Therefore, the Phase II upgrade to the Compact Muon Solenoid (CMS) experiment requires …

Flow Measurement Using Electron Beam Flourescence, Richard Brookes, Andrew Strongrich, Anthony G Cofer, Alina Alexeenko

The Summer Undergraduate Research Fellowship (SURF) Symposium

Low density, high-speed flows are of interest to many research areas including, spacecraft thrusters, hypersonic vehicle control, and atmospheric re-entry studies. Measurement of low-density gas flows by traditional methods such as Schlieren Photography or Particle Image Velocimetry is often not possible. In order to yield new information about gas behavior at low densities the technique of electron beam fluorescence is being re-evaluated. By recreating previous electron beam fluorescence setups used to measure density, the experiment operating parameters including beam strength and density ranges are assessed and a foundation can be built for further experimentation. Comparing intensity plots of imaged flows …

Extra-Terrestrial Habitat Systems: Safety, Reliability, And Resilience, Jory C. Lyons Jr., Amin Maghareh, Audai Theinat, Shirley Dyke, Antonio Bobet

The Summer Undergraduate Research Fellowship (SURF) Symposium

Developing a resilient extra-terrestrial habitat with regards to long-term reliability and safety from hazards including radiation, meteorites, and quakes is necessary to ensure human survival during interplanetary exploration. The objective of this study is to examine conventional aerospace safety and reliability analysis techniques to investigate whether they are sufficient to achieve resilience in extra-terrestrial habitats. These results will be obtained to complete a strengths, weaknesses, opportunities, and threats (SWOT) analysis of compiled techniques to design a sustainable habitat system. Failure modes, effects, and criticality analysis (FMECA) and probabilistic risk assessment (PRA) with their past applications will be assessed to provide …

Space Architecture Assessment Using System-Of-Systems Methodologies, Liam Durbin, Cesare Guariniello, Daniel Delaurentis

The Summer Undergraduate Research Fellowship (SURF) Symposium

As technologies in the space exploration community are further developed, mission complexity and the associated risks have become greater. Dozens of complicated system interactions may result in unexpected, potentially dangerous emergent behaviors. Early efforts are underway by NASA to map potential system architectures (collections of systems which fulfill design requirements) for future human space exploration missions. However, current mission complexity requires the determination of emergent behaviors, as well as time requirements, and safety levels of complicated space exploration architectures, which current analysis methods in use cannot address. To that end, a newer technique has been developed—System Operability Dependency Analysis (SODA). …

Non-Invasive Diagnostic Measures Of Sensorineural Hearing Loss In Chinchillas, Hannah M. Ginsberg, Satyabrata Parida, Michael G. Heinz

The Summer Undergraduate Research Fellowship (SURF) Symposium

According to the World Health Organization, disabling hearing loss affects nearly 466 million people worldwide. Sensorineural hearing loss (SNHL), which is characterized as damage to the inner ear (e.g., cochlear hair cells) and/or to the neural pathways connecting the inner ear and brain, accounts for 90% of all disabling hearing loss. More concerning is that significant perceptual and physiological aspects of SNHL remain “hidden” from standard clinical diagnostics. Hidden hearing loss (HHL) manifests as the inability to understand speech in loud, noisy environments (e.g., listening in a noisy restaurant) despite a normal audiogram (i.e., normal detection of soft sounds). Recently, …

Study Of The Effective Thermal Conductivity Of Polymer Composites With Varying Filler Arrangements, Debraliz Isaac Aragones, Rajath Kantharaj, Aaditya Candadai, Amy Marconnet

The Summer Undergraduate Research Fellowship (SURF) Symposium

Alternative thermal management solutions for electronic devices are being widely explored due to the increasing heat concentration that results from shrinking sizes and increasing power of modern electronics. Clearly, there is a need to spread the heat effectively in these systems, and polymer composites can potentially provide high thermal conductivity at low filler fraction while maintaining desirable mechanical properties for electronic packaging. The present study aims to investigate the effective thermal conductivity of various copper filler arrangements in a polymer matrix. The polymer composites are fabricated using laser cut acrylic templates to embed aligned copper rods in epoxy and create …

Localized Strain And Associated Failure Of Structural Materials, Hayden N. Hermes, Andrea Nicolas, Michael Sangid, Noelle C. Easter, James T. Burns

The Summer Undergraduate Research Fellowship (SURF) Symposium

Aircraft are made primarily out of strong and lightweight aluminum alloys, which are relatively low cost, easy to produce, and have allowed for several innovations in the airplane industry. Even though these alloys are highly corrosion resistant, they are susceptible to failure since airplanes experience some of the harshest fatigue and corrosion conditions. Predicting the location of crack initiation on these corroded materials could lead to preventative safety of aluminum components on an aircraft. To study the mechanisms leading to cracking, precorroded AA7050 samples were fatigue loaded to failure, virtually reconstructed form post-mortem characterizations, and modeled accordingly to obtain the …

Understanding Suspend/Resume Path Of Linux Device Drivers, Yi Qiao, Xiaozhu Felix Lin

The Summer Undergraduate Research Fellowship (SURF) Symposium

Suspend/Resume (S/R), stands for putting mobile devices into sleep mode and wakes them up. Such a S/R process is heavily used in mobile devices today. While controlling by the operating system (OS), S/R process consumes a dominating portion of energy. In order to minimize the power consumption, we have to understand what happens on the S/R Path of modern device drivers so that further solutions reducing the overhead in that process can be found. In a modern OS, device drivers can make up over 70% of the source code, while still heavily dependent on the rest of the OS. Such …

Lead In Residential Water Heaters: An Analysis Of Lead Dissolution Kinetics In Non-Ideal Aquatic Environments, Kelsey Vought, Inez Hua, Amisha D. Shah, Nadezhda N. Zyaykina, Mackenzie Davies

The Summer Undergraduate Research Fellowship (SURF) Symposium

Lead dioxide, a lead corrosion product, is an important contributor to residential drinking water contamination. A neurotoxin and endocrine disruptor, lead poses serious human health concerns. Despite previous research on water distribution pipes, lead in water heating and softening systems is unexplored. Standard tank water heaters and water softeners have significantly different aquatic environments compared to distribution pipes, due to increased temperature and ion concentration levels. This research verifies the iodometric method for lead dioxide detection and quantifies total lead and dissolved lead(IV) ions over time in simulated water heater and softener environments. Initial experiments confirmed the iodometric method for …

Method Validation Of Functional Magnetic Resonance Imaging And Electrophysiological Recording To Investigate Mechanisms Of Vagus Nerve, Christina L. Hendren, Jiayue Cao, Zhongming Liu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Vagus nerve stimulation (VNS) is used clinically to treat epilepsy and depression, but its mechanism of action is unknown. Useful techniques to study this are functional magnetic resonance imaging (fMRI) and the local field potential (LFP). fMRI relies on oxygen use in the brain to show areas where neurons are active. The LFP is an electrical signal created by neuron action potentials and other current moving across cell membranes. The most information can be gained when the two methods are used simultaneously, however, this is difficult to do. This study seeks to validate the technique of fMRI-LFP as applied to …

Scaling Relationships Across Chemically Related Adsorbates For Fast Screening Of Alloy Catalysts For Propane Dehydrogenation, Anne Esther Serban, Ranga Rohit Seemakurthi, Brandon C. Bukowski, Jeffrey Greeley

The Summer Undergraduate Research Fellowship (SURF) Symposium

A catalyst is a material which speeds up the rate of a specific reaction. A reaction that is of significant importance to the chemical industry is the selective transformations of light alkanes (ethane, propane), which are largely available in shale gas, to olefins. These olefins can then be converted into higher-value chemicals, materials, and fuels. However, there are several undesired reactions that take place alongside the main dehydrogenation reaction, so a catalyst of high selectivity is desired. Apart from the industrially used PtSn catalyst, work by our experimental collaborators has shown that various other Pt and Pd alloys (In, Zn) …

Bringing Particle Scale Properties Into Descriptions Of Powder Behavior Through The Enhanced Centrifuge Method, Andrew R. Roginski, Caralyn A. Coultas-Mckenney, Contessa G. Norris, Stephen P. Beaudoin

The Summer Undergraduate Research Fellowship (SURF) Symposium

Inconsistent powder behavior introduces problems such as agglomeration, poor flowability, dust hazards, and segregation that decrease efficiency in powder processing environments. Understanding how a powder interacts with a surface at the particle scale provides insight into how to accommodate individual particle properties and avoid process deficiencies. This project uses an enhanced centrifuge technique to evaluate the adhesion between a stainless-steel surface and a powder comprised of fluorescent particles. Particles are deposited onto stainless steel plates which are rotated in a centrifuge. The adhesion properties are monitored by tracking the rotational speed at which particles of a known size are removed …

Flow Chamber For Confocal Tracking Of Particles In Bone, Brennan Flannery, Russell Main, Xiaoyu Xu

The Summer Undergraduate Research Fellowship (SURF) Symposium

Interstitial fluid flow in the lacunar-canalicular system (LCS) of bone is recognized as a potential regulator of bone remodeling. Movement of fluid across bone cells called osteocytes regulates gene expression that leads to either bone formation or resorption. Interstitial fluid moves in response to bone loading during daily activity, and bone growth occurs to compensate for these loads, affecting bone shape and strength. While interstitial fluid flow is thoroughly studied using computational models, there is a critical need to study flow in real bone samples with imaging techniques. Flow velocities determined from imaging will be more accurate than computational models …

Urban Parcel Logistics Hub And Network Design: The Impact Of Modularity And Hyperconnectivity, Benoit Montreuil, Shannon Buckley, Louis Faugere, Reem Khir, Shahab Derhami

International Material Handling Research Colloquium

Poster 27

Integrated Intermodal Network Design With Nonlinear Inter-Hub Movement Costs, Mohammad Ghane-Ezabadi, Hector A. Vergara

International Material Handling Research Colloquium

Poster 11

Transportation Service Provider Collaboration: Benefits And Insights, Steven Roesch, Kimberly Ellis

International Material Handling Research Colloquium

Poster 30

Dynamic Batching For Order Picking In Warehouses, Jelmer Pier Van Der Gaast, Bolor Jargalsaikhan, Kees Jan Roodbergen

International Material Handling Research Colloquium

Poster 26

Digital Design Of Intralogistics Systems: Flexible And Agile Solutions To Short-Cyclic Fluctuations, Christoph Pott, Anike Murrenhoff, Moritz Wernecke, Philipp-Akira Burger

International Material Handling Research Colloquium

Poster 20

Shuttle-Based Storage And Retrieval Systems With Robotic Order-Picking Shuttle Carrier, Tone Lerher

International Material Handling Research Colloquium

Poster 12

On The Unique Features And Benefits Of On-Demand Distribution Models, Jennifer Pazour, Kaan Unnu

International Material Handling Research Colloquium

Poster 6

Minimizing The Variance Of Fulfillment Cycle Time In A Central Fill Pharmacy: Why And How, Mohamed El Tonbari, Leon Mcginnis

International Material Handling Research Colloquium

Poster 31

My Catalyst, Gabrielle Gambino Lyon

Celebration of Learning

Over the course of my internship and shadow program with Pepper Lawson Construction and Ziegler Cooper Architects, I was able to explore the various career paths involved in the design, construction, and civil engineering fields. My work on the construction site of a high-rise apartment building located in the heart of Houston, TX allowed me first-hand experience working and learning alongside project engineers, contractors, building developers, and the construction team.

This project was the perfect confluence of my main areas of interest: structural, mechanical, civil, and environmental engineering, as well as architecture. My daily work consisted of on-site walk throughs, …

A Performance Calculator For Shuttle-Based Storage And Retrieval System Design, Banu Yetkin Ekren, Anil Akpumar, Tone Lerher

International Material Handling Research Colloquium

Poster 28

A Framework For Modeling Material Handling With Decentralized Control, Kevin Gue, Kai Furmans

International Material Handling Research Colloquium

Poster 23

Contribution Of Physical Internet Containers To Mitigate The Risk Of Cargo Theft, Yanyan Yang, Eric Ballot, Miguel Gaston Cedillo-Campos

International Material Handling Research Colloquium

Poster 24

Batching And Sequencing In Bucket Brigade Systems With Heterogeneous Items, Yossi Bukchin, Eran Hanany, Eugene Khmelnitsky

International Material Handling Research Colloquium

Poster 9

A Measurement Tool For Circular Economy Practices: A Case Study In Pallet Supply Chains, Maria Grazia Gnoni, Andres L. Carrano, Fabiana Tornese, Jennifer Pazour, Brian K. Thorn

International Material Handling Research Colloquium

Poster 7