Engineering Commons^™

Worksheet 09 Horn, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet designs a pyramidal horn antenna fed by a waveport.

Worksheet 03 - Near Field, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet guides students to change the observational region between, reactive near field, radiating near field, and far-field.

Worksheet 08 - Helix, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet creates a helical antenna operating in the axial mode. The antenna is mounted on a ground plane. The users can change the circumference of the helix and change the operating mode to broadside or conical if they wish.

Worksheet 10 - Patch, Ashanthi Maxworth Phd

Antenna Design With HFSS

In this worksheet, steps are given to create a slotted rectangular microstrip patch antenna with an inset feed using a stripline. The patch antenna is operating in the TM10 mode.

Worksheet 02 - Meshing, Ashanthi Maxworth Phd

Antenna Design With HFSS

This worksheet is designed to oberserve the variations in results when the mesh is varied from coarse to fine, hence how to find the optimum mesh size such that we can get accurate results while not compromising computational power.

Leverage Topology Optimization To Maximize Structure Design Efficiency, Teng Li, Saad Aqerrout

ME 4233/6233 Fundamentals of FEA

This paper presents the topology optimization method to improve the efficiency of mechanical structure design.

Computational Mechanics Implementation Of Performance Based Testing In Massive Concrete Structures, Gabriel Y. Riveros

ME 4233/6233 Fundamentals of FEA

Most of the nation’s critical water resource infrastructures are near or have exceeded their design lives. Consequently, there is a huge need for the development of assessment procedures that will change the way dams are maintained and operated with the intent of extending the service life. This is crucial for ensuring the safety and security of our nation’s public services. The combination of advanced computational mechanics and performance based testing (PBT) methods can be used to investigate the existing conditions of large concrete structures.

Performance based testing (PBT) is a new and innovative non-destructive testing technique that we are implementing …

Comparison Of Johnson-Cook And Linear Elastic-Perfectly Plastic Material Models For Ballistic Impact Case, Logan J. Callahan, Marella Failla, Harrison Williams

ME 4233/6233 Fundamentals of FEA

In an effort to characterize the linear elastic-perfect plastic (J2) and Johnson-Cook (JC) Strengthening and Damage material models for an Aluminum target material being struck by a steel penetrator, finite element analysis (FEA) will be used to simulate the residual velocities from ballistic impacts, using various velocities of the penetrator. The object is to define the point at which the J2 material model is no longer accurate and therefore requires the use of the JC material models.

Numerical Analysis Of Taylor Impact With Various Nose Shapes, Jean C. Santiago Padilla, Erik M. Chappell

ME 4233/6233 Fundamentals of FEA

The Taylor impact test is an experimental technique used to determine dynamic material response and to validate constitutive models used in numerical simulations. It generally consists of shooting a cylinder rod of a select material against a rigid target at different velocities. After impact, the plastic deformation of the cylinder is recorded and is directly compared to numerical predictions. Another application for Taylor impact was proposed by Li et al. (2021) where the nose shape of the cylinder is modified to create different loading environments that can test electronic equipment in penetration weapons. FEA models where designed in ABAQUS/Explicit to …

The Bridge Newsletter Spring 2022, Missouri University Of Science And Technology

The Bridge Newsletter

-CArEE faculty awarded Kummer Ignition Grants
-Geldert-Murphey poised to become ASCE’s 2023 president-elect
-Nine new members inducted during Academy of Civil Engineers 50^th anniversary celebration
-Steel Bridge Team wins fourth consecutive regional competition, will compete at nationals

Cfd Simulation Of Varying Fuel Jet Placement Of Mach 2 Flow (Poster), Sara Broad

Honors Capstone Projects

No abstract provided.

2022 Spring Graduate Recognition Program, Propulsion Research Center, Robert Frederick

PRC Graduate Recognition

This program includes the graduate recognition program for spring 2022. Includes photographs, upcoming events, recent publications, and student profiles.

Prediction Of Residual Stresses In L-Pbf Ti-6al-4v Fatigue Specimens Using A Thermo-Mechanical Finite Element Model, Haley Petersen, Brad J. Sampson

ME 4233/6233 Fundamentals of FEA

Laser Powder Bed Fusion (L-PBF) is an additive manufacturing process that is becoming widely adopted in the automotive, aerospace, and biomedical industries. It uses a laser to melt metal in the form of powder to build parts in a layer-by-layer fashion based on an imported CAD geometry. The constant remelting of previous layers can produce unwanted thermally induced residual stresses in the part due to large thermal gradients, which can drastically reduce the fatigue life of the material. Predicting these residual stresses within the as-built part would be advantageous because one could better understand how the part will perform in …

Trust Nonlinear Dynamic, Sami Zeggar, Adib El Mrabet Tarmach

ME 4233/6233 Fundamentals of FEA

The TRUST project's goal is to promote the efficient and responsive development of experimental, modeling, and simulation capabilities for future systems by constructing realistic testbeds that can be exercised more readily and efficiently. The testbeds will be used to conduct experiments in present and future engineering environments using complimentary modeling and simulation. TRUST required several tools in preproduction states and helped identify key features for future development. The required tools include: 1. Automated simulation management from the engineering common model framework (ECMF) 2. Version controlled model repositories for engineering analysis baseline models (EABM) 3. Experimental results databases (TIMS) 4. Communication …

A Computational Approach For The Estimation Of Elastic Behavior Of Metal Matrix Composites, Emmanuel Michalakis

ME 4233/6233 Fundamentals of FEA

Composite materials are being widely used in many industries for their properties and efficiency. The current work presents a computational approach that can estimate the elastic behavior of metal composites and porous materials using finite element models of representative volume elements (RVEs) which have been used to test and design particulate composite materials. The required size of the RVE for the determination of elastic properties, the effects of the elastic modulus fraction Einc/Emat on the homogenized elasticity and the convergence of the homogenized properties E11, E22 and E33 with the size of the RVE is explored.

2021-2022 Program And Abstracts: Celebration Of Student Scholarship, Morehead State University. Undergraduate Research Fellowship Program.

2022 Celebration of Student Scholarship - Poster Presentations

The 2021-2022 Program and Abstracts for the Celebration of Student Scholarship at Morehead State University held on April 27, 2022. A Showcase of Student Research, Scholarship, Creative Work, and Performance Arts.

Powering A Sustainable Electric Vehicle Future, Harmony Ruth, Jordan Brickman

Undergraduate Research Symposium Posters

Electric vehicle sales account for roughly 20% of total sales world wide and are projected to be 80% by 2050. China's electric vehicle market holds a 13.3% market share. China exported 550,000 electric vehicles in 2021. China represents a 54% share of the world's coal consumption as of 2020. Why study China on this issue? China is a major player in the World Economy.

2022- The Twenty-Sixth Annual Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Twenty-sixth Annual Symposium of Student Scholars, held on April 19, 2022. Includes abstracts from the presentations and posters.

Understanding Travel For Families With A Physically Disabled Child Through The Occupational Therapy Lens, Dinah Adams, Karen Park, Susan Macdermott

Spring 2022 Virtual OTD Capstone Symposium

Travel is a complex occupation that involves interactions between body function, activity participation, and the environment. For families traveling with a physically disabled child this occupation becomes even more complex. The available literature on the lived experiences of these families is significantly limited. This project aims to determine participants’ experiences of commercial airline travel with a child who has a physical disability. Through the participants experiences, barriers and needs of this population can be identified. Through identification of barriers, the needs of this population are highlighted as well as ways they can be supported and advocated for.

Pressure Ulcer Prevention: A Quality Improvement Project, Noah Blevins, Graci Borders, Brett Bentley, Carly Crutchfield, Rachel Dillion, Jacob Dyer, Heleigh Eldridge, Taylor Emmons, Suzi White

2022 Celebration of Student Scholarship - Poster Presentations

A pressure ulcer is an injury that affects the underlying tissue and skin and is primarily caused by prolonged pressure on the skin. During a clinical rotation at a small rural teaching hospital, pressure ulcers were prevalent in an estimated 80% of patients in the intensive care unit (ICU) during a three-week period. Approximately $26.8 billion are spent every year in the United States treating pressure ulcers. The purpose of this quality improvement project is to provide staff education to ICU nurses in order to reduce and prevent the prevalence of pressure ulcers in patients. A thorough literature review was …

The Perception Of Minority Student-Athletes’ And Non-Athlete Students’ Learning Experience At A Predominately White Institution, William Wellman, Jelani Garvin, Jane Zhang, Steve Chen

2022 Celebration of Student Scholarship - Poster Presentations

This study examined mainly African-American and minority students' learning experience at a regional public university in Appalachia for the purpose of improving the existing academic support services and creating a safe diverse learning environment for racial minority students.

Frequency Of Genetic Variants At The Mc1r Locus In A Student Population, Emmalea K. Dowdy, Grace C. Stubblefield, David K. Peyton

2022 Celebration of Student Scholarship - Poster Presentations

The Melanocortin-1 Receptor gene (MC1R) encodes a protein that is associated with pigmentation in vertebrate animals. An extraordinary number of variations in this gene have arisen over time due to the importance of pigmentation in camouflage, photosensitivity, vitamin D production, and other evolutionary factors. Variations in the MC1R gene sequence became important to survival as humans migrated out of Africa and into cooler climates with less sun exposure, where lighter skin pigmentation (and therefore more vitamin D production) was key to survival. These genetic variations (alleles) continue to exist in modern humans. Recent research into the MC1R gene variations shows …

Research, Testing, And Validation Of Small Satellite Designs: Cubesats, Cansats, Pocketqubes, And Femtosatellites, Jason A. Combs, Jose L. Garcia

2022 Celebration of Student Scholarship - Poster Presentations

The focus of this project, through research and testing, was to prepare various elements of small satellite experiential education curriculum. Rather than be constrained to the expensive and long-term timelines of a larger satellites, students can assemble, test, and operate various classes of small satellites in a valuable learning experience that will prepare them to work on larger projects. The true benefit of a PocketQube, CanSat, or femtosatellite is that they can be built with less money, less experience, and less long-term commitment while providing a scaled version of the real-life satellite development process that will engage and inspire students. …

Novel Gain-Of-Function Mutations In The Telomerase Rna Of Saccharomyces Cerevisiae, Keenan Conley, Madison Frazier, Melissa Mefford

2022 Celebration of Student Scholarship - Poster Presentations

Yeast are eukaryotic organisms that contain liner chromosomes. At the ends of these chromosomes, there are special regions known as telomeres. Telomeres are composed of non-coding nucleotides that serve to protect the vital coding DNA found throughout the rest of the chromosome. During the process of DNA replication, however, telomeres become progressively shorter which can lead to cellular senescence. To solve this issue, yeast express the enzyme telomerase. Telomerase is composed of a telomerase reverse transcriptase protein (TERT) and telomerase RNA (TLC1) in yeast. When telomeres become too short, telomerase extends telomeres by adding to the 3’ overhang. Telomeres shorten …

Technology In Workplace Communication By Generation, Hannah Meadows, Christy Trent

2022 Celebration of Student Scholarship - Poster Presentations

The purpose of this research study was to determine the generational differences in the use of communication technology in the workplace. Most employees feel a deeper sense of connection to those in their own generational group. This survey looks at ideologies across four generations, Baby Boomers, Generation X, Millennials, and Generation Z, to help give employers some insight into why employees feel this way and encourage better communication in the workforce.

Fungi In A Warmer World: Fungal Diversity In The Tropical Miocene Climate Optimum Of The Clarkia Region Of Idaho, Usa, J. Fairchild, L. Lennex-Stone, T. Horsfall, L. Tarlton, S. Jones, A. Caldwell, O. Vanderespt, L. Smallwood, A. Patel, J. O'Keefe, I. Romero, N. Nunnez Otano, M. Pound

2022 Celebration of Student Scholarship - Poster Presentations

A knowledge gap associated with how fungal communities change in response to climate was identified in the 2018 State of the World Fungi report (Willis, 2018). While it is virtually impossible to test in the present, fungal assemblage changes can be studied in sediments from a warmer-than-present period such as the Miocene Climate Optimum (MCO) (Romero et al. 2021; O’Keefe 2017). The Fungi in a Warmer World project aims to generate and analyze a global-scale data set of fungal biodiversity, ecology, and associated flora from MCO sediments. This dataset will be used to model past fungal assemblage changes across the …

Morphometrics Of The Rare Earwigfly Merope Tuber, Nicholas Finch, Sean O'Keefe

2022 Celebration of Student Scholarship - Poster Presentations

Merope tuber Newman (Mecoptera: Meropeidae) is a rare North American species of earwigfly, which is closely related to common scorpionflies. “Earwigfly” refers to three different species: the Western Australian Austromerope poulton, the South American Austromerope brasiliensis, and finally, the Eastern North American Merope tuber. This last species was the focus of our study. Johnson’s 1995 study was based on 160 earwigflies, where he measured the female abdomen length, male and female forewing length, and male basistylus and dististylus length. In their 2014 study, based on 82 earwigflies, Skvarla, Hartshorn, and Dowling measured head width, pronotum width, forewing length, abdomen length, …

Encouraging Increased Ppe Compliance: A Quality Improvement Project, Christen Ballard, Hannah Carpenter, Skyler Harper, Angela Marcum, Suzi White

2022 Celebration of Student Scholarship - Poster Presentations

Personal protective equipment (PPE) is used to minimize infection transmission from patient to healthcare worker, or vice versa. During a clinical rotation in a large urban teaching hospital, it was noted that a number of nurses failed to adhere to proper PPE policies. A literature review focusing on thirty-two studies found that average nurse compliance to proper PPE is 34%. This review included an overall discussion of factors affecting compliance, as well as a more in-depth review of the effect of education on PPE compliance, how comfort and proper fitting affects compliance, and the general effectiveness of PPE when used …

“The Never Ending Story:” Circularizing Ch. Viii In Saccharomyces Cerevisiae, Chisom Iloegbunam, Melissa Mefford

2022 Celebration of Student Scholarship - Poster Presentations

Chromosomes are molecules of DNA that hold large quantities of genetic material in an organism. Generally, in nature, eukaryotic chromosomes are linear while prokaryotic chromosomes are circular. Since they are linear, eukaryotic chromosomes possess telomeres, or repetitive nucleotide sequences, on their ends. This significant difference in structure requires different additions to the basic replication process. In prokaryotes, replication starts at a single point on the chromosome and continues until the whole chromosome has been copied. In eukaryotes, replication happens in fragments with multiple starting points. Because of this more complicated replication process, the free 3’ ends of our DNA cannot …

College Students’ Knowledge And Use Of Herbal Supplements: Informed Decision, Health Risk, Or Marketing Ploy?, Jillian Wallshield, Wilson Gonzalez-Espada

2022 Celebration of Student Scholarship - Poster Presentations

The purpose of this study is to better understand the extent to which college students from Eastern Kentucky use Herbal Supplements (HS). The research questions for this study were:

• How do the participants find out about HS?

• How helpful do participants perceive the HS they take to be?

• What misconceptions do participants have regarding HS?

• Does a positive or negative attitude towards science change the usage rate of HS?