Engineering Commons^™

Development Of An Energy-Based Nearfield Acoustic Holography System, Michael C. Harris

Theses and Dissertations

Acoustical-based imaging techniques have found merit in determining the behavior of vibrating structures. These techniques are commonly used in numerous applications to obtain detailed noise source information and energy distributions on source surfaces. This thesis focuses on the continued development of the nearfield acoustic holography (NAH) approach. Conventional NAH consists of first capturing pressure data on a two-dimensional conformal measurement contour in the nearfield of the radiating source. These data are then propagated back to the vibrating structure to obtain the normal velocity profile on the source surface. With the source surface velocity profile known, the acoustic pressure, particle velocity, …

Sound Quality Analysis Of Sewing Machines, James J. Chatterley

Theses and Dissertations

Sound quality analysis is a tool designed to help determine customer preferences, which can be used to help the designer improve product quality. Many industries desire to know how the consuming public perceives their product, as this affects the product life and success. This research investigates which of the six sewing machines provided by Viking Sewing Machine Group (VSM group) consumers find most acoustically appealing. The sound quality analysis methods used include both jury based listening tests and quantitative sound quality metrics from empirical equations. The results from both methods are completely independent and are shown to have a very …

Effects Of Fuel Molecular Structure And Composition On Soot Formation In Direct-Injection Spray Flames, Kenth Ingemar Svensson

Theses and Dissertations

Numerous investigations have been conducted to determine the effect of fuel composition and molecular structure on particulate emissions using exhaust gas analysis, but relatively few measurements have been obtained in-cylinder or under conditions where fuel effects can be isolated from other variables. In this work, dimethoxymethane was used as the base fuel to produce a non-sooting flame in a constant volume combustion vessel at 1000 K, and a density of 16.6 kg/m3. A second fuel was then added incrementally to determine an incipient soot limit. Line-of-sight extinction measurements were used as the primary diagnostic tool to determine if a correlation …

Effects Of Moisture On Combustion Characteristics Of Live California Chaparral And Utah Foliage, Steven G. Smith

Theses and Dissertations

Current fire-spread models are based largely on empirical correlations based on fires burning through dead pine needles. There is a need to increase the accuracy of modeling wildfires in live vegetation. This project investigates the quantitative and qualitative ignition characteristics of eight live fuels, four from southern California (manzanita, scrub oak, ceanothus, and chamise) and four from Utah (canyon maple, gambel oak, big sagebrush, and Utah juniper). Individual leaves were observed as they were exposed to hot gases from a flat flame burner. The broadleaf species from both California and Utah had noticeable surface changes during the ignition process. All …

Development Of A Five-Axis Machining Algorithm In Flat End Mill Roughing, Michael Blaine Thompson

Theses and Dissertations

To further the research done in machining complex surfaces, Jensen [1993] developed an algorithm that matches the normal curvature at a point along the surface with the resultant radius formed by tilting a standard flat end mill. The algorithm called Curvature Matched Machining (CM2) is faster and more efficient than conventional three-axis machining [Jensen 1993, Simpson 1995 & Kitchen 1996]. Despite the successes of CM2 there are still many areas available for research. Consider the machining of a mold or die. The complex nature of a mold requires at least 20-30 weeks of lead time. Of those 20-30 weeks 50% …

Development And Application Of A New Modeling Technique For Production Control Schemes In Manufacturing Systems, Bashar Hafez Sader

Theses and Dissertations

This dissertation presents dynamic system models of continuous manufacturing systems based on analogies with electrical systems. The developed modeling technique has the capability to explicitly specify production control schemes including control points, material and information flow paths, and logical operations. The model provides standard graphical representations and governing equations to describe both the steady state and transient responses of continuous manufacturing systems. For deterministic systems, these equations can be solved to get closed-form solutions. For stochastic systems, numerical solutions can be obtained for any probabilistic distribution. The electrical analogs provide an excellent tool to model control signals and logical operations. …

Executable Model Development From Architectural Description With Application To The Time Sensitive Target Problem, Luis M. Diaz Rodriguez

Theses and Dissertations

As the Department of Defense (DoD) moves to a capabilities-based approach for requirements definition and systems development, it has become necessary to conceptualize and evaluate our needs at the System of Systems (SoS) level. Desired capabilities are often achievable only through seamless integration of many different systems. As the classical systems engineering approaches are not suited to effectively handle the complexity of SoS level concepts, an architectures-driven approach has emerged as a way of defining and evaluating these new concepts. While the use of architectures for documenting and tracking interfaces and interoperability concerns is generally understood, architectural analysis and the …

Higher Radix Floating-Point Representations For Fpga-Based Arithmetic, Bryan Christopher Catanzaro

Theses and Dissertations

Field Programmable Gate Arrays (FPGAs) are increasingly being used for high-throughput floating-point computation. It is forecasted that by 2009, FPGAs will provide an order of magnitude greater sustained floating-point throughput than conventional processors. FPGA implementations of floating-point operators have historically been designed to use binary floating-point representations, as do general purpose processors. Binary representations were chosen as the standard over three decades ago because they provide maximal numerical accuracy per bit of floating-point data. However, the unique nature of FPGA-based computation makes numerical accuracy per unit of FPGA resources a more important measure of the usefulness of a given floating-point …

Performance Of Concrete Bridge Deck Surface Treatments, Tyler S. Nelsen

Theses and Dissertations

The purpose of this research was to identify the types of surface treatments available for use on concrete bridge decks and to determine which materials are most capable of providing long-term protection from contamination by chloride ions. The products addressed in this report primarily include urethanes, silicon-based sealers, and epoxies. An extensive literature review was conducted to document common overlay distresses, performance histories, and properties of specific surface treatment products currently available in the industry. In addition, three reports summarizing in-house experiments performed by the Utah Department of Transportation between 1995 and 2003 regarding various types of surface treatments were …

Estimating The Dynamic Sensitive Cross Section Of An Fpga Design Through Fault Injection, Darrel E. Johnson

Theses and Dissertations

A fault injection tool has been created to emulate single event upset (SEU) behavior within the configuration memory of an FPGA. This tool is able to rapidly and accurately determine the dynamic sensitive cross section of the configuration memory for a given FPGA design. This tool enables the reliability of FPGA designs and fault tolerance schemes to be quickly and accurately tested. The validity of testing performed with this fault injection tool has been confirmed through radiation testing. A radiation test was conducted at Crocker Nuclear Laboratory using a proton accelerator in order to determine the actual dynamic sensitive cross …

A Flexible Circuit-Switched Communication Network For Fpga-Based Soc Design, Clint Richard Hilton

Theses and Dissertations

As FPGA densities continue to improve, single chips are becoming capable of implementing larger and more complex systems. Even today these systems may include several processors working in conjuction with a handful of other standard interfaces or custom modules. Additional system complexity naturally leads to added complexity throughout the different design and implementation stages. Attempting to design such a system while maintaining high performance and within a reasonable time frame is becoming more and more difficult. Architectural design approaches ranging from direct module interconnection to sophisticated bus schemes have been used to build such systems, all with their own trade-offs. …

Developing A Gis And Hydrological Modeling Approach For Sustainable Water Resources Management In The West Bank -- Palestine, Walid Wajeeh Sabbah

Theses and Dissertations

This research deals with setting up a GIS and hydrological modeling based approach for sustainable water resources management in the West Bank of Palestine. This water sustainability approach took into consideration the water balance, the social, the economic, the demographic, the environmental, and the institutional components in order to enhance and promote the sustainable development in Palestine, both on the short and long runs. To evaluate the water balance component, a methodology was introduced to create the Water Sustainability Map (WSM). Since the groundwater is currently the only accessible water source by the Palestinians, the WSM is represented by the …

Electrothermomechanical Modeling Of A Surface-Micromachined Linear Displacement Microactuator, Christian D. Lott

Theses and Dissertations

The electrothermomechanical characteristics of an electrically-heated polycrystallinesilicon microactuator are explored. Using finite-difference techniques, an electrothermal model based on the balance of heat dissipation and heat losses is developed. For accurate simulation, the relevant temperature dependent properties from the microactuator material are included in the model. The electrothermal model accurately predicts the steady-state power required to hold position, and the energy consumed during the thermal transient. Thermomechanical models use the predictions of temperature from the electrothermal solution to calculate displacement and force from pseudo-rigid-body approximations and commercial finite-element code. The models are verified by comparing experimental data to simulation results of …

Hydrodynamic Drag And Flow Visualization Of Isotruss Lattice Structures, James T. Ayers

Theses and Dissertations

Hydrodynamic drag testing was conducted for eleven different configurations of IsoTruss® lattice structures. Flow visualization of prototypical IsoTruss® wind towers was also performed using Particle Image Velocimetry instrumentation. The drag test and flow visualization specimens included 6-node and 8-node configurations, single and double-grid geometries, thick and thin member sizes, smooth and rough surface finishes, a helical-only structure, and a smaller outer diameter test specimen. Three sets of hydrodynamic drag tests were conducted in a closed-circuit water tunnel: 1) orientation drag tests, 2) water velocity drag tests, and 3) height variation drag tests. The orientation drag tests measured the hydrodynamic drag …

Equalization Techniques For Multipath Mitigation In Aeronautical Telemetry, Vladimir Ignacio Paje

Theses and Dissertations

This thesis describes the application of adaptive equalization based on the constant modulus algorithm (CMA) and the decision-feedback minimum mean squared error (DF-MMSE) concept to the two compatible offset QPSK waveforms (FQPSK and SOQPSK-TG) that constitute the ARTM Tier-1 waveforms. An adaptive version of the DF-MMSE equalizer is developed and applied to this application. In the presence of frequency selective multipath interference typically encountered in aeronautical telemetry, both equalization techniques are shown to provide reliable performance for FQPSK and SOQPSK-TG. The performance of both waveforms with the DF-MMSE equalizer is slightly better than that using the CMA equalizer. Implementation trade-offs …

Deconvolution Analysis Of Laser Pulse Profiles From 3-D Ladar Temporal Returns, Michael D. Walter

Theses and Dissertations

Three-dimensional laser imaging systems offer important advantages for battlefield applications, such as night-time targeting and tactical reconnaissance. Recently developed technologies used by coherent detection systems that collect temporally resolved images include arrays of Avalanche Photo-Diodes (APD), Geiger mode APDs, and photo-diodes. Frequently, LADAR systems produce waveforms from each detector that characterize the convolution of the transmitted laser pulse with the target surface. The pulse convolution generates uncertainty as to the precise location of a target surface, which can severely impact various weapon systems' targeting capability. This work analyzes two deconvolution techniques: Wiener filtering and an iterative process derived from the …

Analytical Modeling Of Wood-Frame Shear Walls And Diaphragms, Johnn Paul Judd

Theses and Dissertations

Analytical models of wood-frame shear walls and diaphragms for use in monotonic, quasi-static (cyclic), and dynamic analyses are developed in this thesis. A new analytical model is developed to accurately represent connections between sheathing panels and wood framing members (sheathing-to-framing connections) in structural analysis computer programs. This new model represents sheathing–to–framing connections using an oriented pair of nonlinear springs. Unlike previous models, the new analytical model for sheathing-to-framing connections is suitable for both monotonic, cyclic, or dynamic analyses. Moreover, the new model does not need to be scaled or adjusted. The new analytical model may be implemented in a general …

All Hexahedral Meshing Of Multiple Source, Multiple Target, Multiple Axis Geometries Via Automatic Grafting And Sweeping, Matthew N. Earp

Theses and Dissertations

The development of algorithms for the automatic creation of finite element meshes composed entirely of hexahedra (all-hex) is an active area of research. All-hex meshes are desirable for their characteristic of high accuracy with a low node count. Sweeping is one of the most widely used algorithms for generating all-hex meshes. A limitation of sweeping, however, is that it can currently be applied only to prismatic or extruded geometry types. This thesis develops a method to combine sweeping with another algorithm known as "Grafting". Grafting adjusts the mesh on one volume to conform to a second volume. In this manner …

Phase Locked Flow Measurements Of Steady And Unsteady Vortex Generator Jets In A Separating Boundary Layer, Laura C. Hansen

Theses and Dissertations

Vortex generator jets (VGJs) have been found to be an effective method of active separation control on the suction side of a low pressure turbine (LPT) blade at low Reynolds numbers. The flow mechanisms responsible for this control were studied and documented in order to provide a basis for future improvements in LPT design. Data were collected using a stereo PIV system that enabled all three components of velocity to be measured. Steady VGJs were injected into a laminar boundary layer on a flat plate (non-separating boundary layer) in order to more fully understand the characteristics and behavior of the …

Size Function Based Mesh Relaxation, John David Howlett

Theses and Dissertations

This thesis addresses the problem of relaxing a finite element mesh to more closely match a size function. The main contributions include new methods for performing size function based mesh relaxation, as well as an algorithm for measuring the performance of size function based mesh relaxation methods.

Determination Of Wall Thickness And Height When Cutting Various Materials With Wire Electric Discharge Machining Processes, Sangseop Kim

Theses and Dissertations

This thesis looks at the capabilities of cutting thin webs on Wire EDM machines that are difficult or impossible to machine using conventional methods. Covered is an investigation of how different material and web thickness affect the capability of machining thin-walled parts.

Five different metals are used for the test; Aluminum 6061 T6, Yellow Brass SS360, 420 Stainless Steel, D2 unheat-treated tool steel 25-30 RC, and D2 heat-treated tool steel 60-65 RC. The small parts were cut to a 6mm (0.2362 inch) height with six different wall thicknesses: 0.30mm (0.0118 inch), 0.25mm (0.0098 inch), 0.20mm (0.0078 inch), 0.15mm (0.0059 inch), …

Structure From Motion Using Optical Flow Probability Distributions, Paul Clark Merrell

Theses and Dissertations

Several novel structure from motion algorithms are presented that are designed to more effectively manage the problem of noise. In many practical applications, structure from motion algorithms fail to work properly because of the noise in the optical flow values. Most structure from motion algorithms implicitly assume that the noise is identically distributed and that the noise is white. Both assumptions are false. Some points can be track more easily than others and some points can be tracked more easily in a particular direction. The accuracy of each optical flow value can be quantified using an optical flow probability distribution. …

A Tool Wear Comparative Study In Turning Versus Computer Simulation In 1018 Steel, Woodrow D. Miner

Theses and Dissertations

The material removal process uses cutting tools in order to produce the desired shape of the workpiece. Tool wear has been a problem for cutting tools, since cutting tools wear and break. Research has been accomplished in the tool wear field for tool life and more recently tool wear. The computer generation has created a method to simulate the material removal process. These computer simulations model the cutting tool reaction with the workpiece. Many of the simulation models use finite element analysis to calculate the reaction of the cutting tool. Different finite element models are being used throughout the world …

Dual-Stage Thermally Actuated Surface-Micromachined Nanopositioners, Neal B. Hubbard

Theses and Dissertations

Nanopositioners have been developed with electrostatic, piezoelectric, magnetic, thermal, and electrochemical actuators. They move with as many as six degrees of freedom; some are composed of multiple stages that stack together. Both macro-scale and micro-scale nanopositioners have been fabricated. A summary of recent research in micropositioning and nanopositioning is presented to set the background for this work. This research project demonstrates that a dual-stage nanopositioner can be created with microelectromechanical systems technology such that the two stages are integrated on a single silicon chip. A nanopositioner is presented that has two stages, one for coarse motion and one for fine …

Manufacturing Quality Of Carbon/Epoxy Isotruss (R) Reinforced Concrete Structures, David Thomas Mccune

Theses and Dissertations

This thesis explores the quality of hand-manufactured carbon-epoxy IsoTruss® grid structures for use as reinforcement in concrete piles. Large IsoTruss® grid structures were manufactured and embedded in 14.0" (35.6 cm) diameter concrete to create IsoPiles™. The IsoPiles™ were designed to have flexural characteristics similar to steel reinforced concrete piles of equal diameter. Bending stiffness was matched based on the longitudinal members. A method for comparing transverse steel reinforcement to helical IsoTruss® members was developed, along with equations to facilitate the design of IsoTruss® structures with rounded nodes.

Compression tests were performed on 3.0 ft (0.91 m) long sections taken from …

Developing A Design Space Model Using A Multidisciplinary Design Optimization Schema In A Product Lifecycle Management System To Capture Knowledge For Reuse, Nathaniel Luke Fife

Theses and Dissertations

Parametric strategies for design automation and optimization can have a big impact on engineering design. When parametric tasks and optimization frameworks and methods are combined, theses strategies can be used to make up what is known as a multidisciplinary design optimization (MDO) schema. Knowledge of a design space can be modeled by using a MDO schema to represent the design process. However, current MDO frameworks used to create this schema lack the scope to capture enterprise wide knowledge for reuse and collaboration. Concurrent with the development of MDO, many companies are moving toward increased use of product lifecycle management (PLM). …

Algal Succession And Nutrient Dynamics In Elephant Butte Reservoir, Eric J. Nielsen

Theses and Dissertations

A water quality model was created for Elephant Butte Reservoir, New Mexico to understand nutrient dynamics and algal response during a three year period. The model chosen for this study was CE-QUAL-W2 because of its proven ability to represent hydrodynamics and the ability to represent multiple algal groups. Elephant Butte has been subject to large algal blooms. This study examined the phosphorus loading into the reservoir to see if it could sustain the observed algal growth. Data showed that the amount of bioavailable phosphorus was more than enough to support large blooms. This study also was an initial attempt to …

Floodplain And Flood Probability Mapping Using Geodatabases, Douglas J. Gallup

Theses and Dissertations

This research presents methods of creating digital maps for floodplain delineation and flood probability studies and storing them in a geodatabase. Methods for creating a geodatabase for water resources outside of a GIS are presented. The geodatabase follows the ArcHydro data model. Methods are also shown for creating digital flood maps and storing them in the geodatabase. These flood maps, defining the floodplain boundary and flood probability, are stored in a digital format ready for use in a FEMA flood hazard project, allowing for better archival methods and reproducibility.

In-Fiber Optical Devices Based On D-Fiber, Kevin H. Smith

Theses and Dissertations

This dissertation presents the fabrication and analysis of in-fiber devices based on elliptical core D-shaped optical fiber. Devices created inside optical fibers are attractive for a variety of reasons including low loss, high efficiency, self-alignment, light weight, multiplexibility, and resistance to electromagnetic interference. This work details how D-fiber can be used as a platform for a variety of devices and describes the creation and performance of two of these devices: an in-fiber polymer waveguide and a surface relief fiber Bragg grating. In D-fiber the core is very close to the flat side of the ‘D’ shape. This proximity allows access …

Statistical Investigation Of Friction Stir Processing Parameter Relationships, Jonathan H. Record

Theses and Dissertations

Friction Stir Welding (FSW) is an emerging joining technology in which basic process understanding is still inadequate. Knowledge of FSW parameter relationships is needed to better understand the process and implement proper machine control. This study utilized a 3-factor, 3-level factorial design of experiments to investigate relationships between key process inputs and measured output parameters. All experiments utilized 7075-T7 aluminum and a threaded pin tool with a 25.4 mm shoulder diameter, 4.76 mm pin length, and 7.9 mm pin diameter. Spindle speed, feed rate, and tool depth were varied throughout 54 welds while X, Y, and Z forces, X torque, …